added mx Project for the machine

meta-st/meta-st-stm32mp-addons/mx/stm32mp157d-vrpmdv-mon-mx/Drivers/CMSIS/Device/ST/STM32MP1xx/Include/stm32mp1xx.h

@@ -0,0 +1,222 @@
+/**
+  ******************************************************************************
+  * @file    stm32mp1xx.h
+  * @author  MCD Application Team
+  * @brief   CMSIS STM32MP1xx Device Peripheral Access Layer Header File.
+  *
+  *          The file is the unique include file that the application programmer
+  *          is using in the C source code, usually in main.c. This file contains:
+  *           - Configuration section that allows to select:
+  *              - The STM32MP1xx device used in the target application
+  *              - To use or not the peripheral’s drivers in application code(i.e.
+  *                code will be based on direct access to peripheral’s registers
+  *                rather than drivers API), this option is controlled by
+  *                "#define USE_HAL_DRIVER"
+  *
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+
+/** @addtogroup CMSIS
+  * @{
+  */
+
+/** @addtogroup stm32mp1xx
+  * @{
+  */
+
+#ifndef __STM32MP1xx_H
+#define __STM32MP1xx_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+/** @addtogroup Library_configuration_section
+  * @{
+  */
+
+/* Uncomment the line below according to the target STM32MP1 device used in your
+   application
+  */
+
+#if !defined (STM32MP1)
+#define STM32MP1
+#endif /* STM32MP1 */
+
+/*  Tip: To avoid modifying this file each time you need to switch between these
+        devices, you can define the device in your toolchain compiler preprocessor.
+  */
+#if !defined  (USE_HAL_DRIVER)
+/**
+ * @brief Comment the line below if you will not use the peripherals drivers.
+   In this case, these drivers will not be included and the application code will
+   be based on direct access to peripherals registers
+   */
+  /*#define USE_HAL_DRIVER */
+#endif /* USE_HAL_DRIVER */
+
+/**
+  * @brief CMSIS Device version number
+  */
+#define __STM32MP1xx_CMSIS_VERSION_MAIN   (0x01U) /*!< [31:24] main version */
+#define __STM32MP1xx_CMSIS_VERSION_SUB1   (0x06U) /*!< [23:16] sub1 version */
+#define __STM32MP1xx_CMSIS_VERSION_SUB2   (0x00U) /*!< [15:8]  sub2 version */
+#define __STM32MP1xx_CMSIS_VERSION_RC     (0x00U) /*!< [7:0]  release candidate */
+#define __STM32MP1xx_CMSIS_VERSION        ((__CMSIS_DEVICE_VERSION_MAIN     << 24)\
+                                      |(__CMSIS_DEVICE_HAL_VERSION_SUB1 << 16)\
+                                      |(__CMSIS_DEVICE_HAL_VERSION_SUB2 << 8 )\
+                                      |(__CMSIS_DEVICE_HAL_VERSION_RC))
+
+/**
+  * @}
+  */
+
+/** @addtogroup Device_Included
+  * @{
+  */
+#if defined(CORE_CM4)
+#if defined(STM32MP15xx)  /* keep for backward compatibility STM32MP15xx = STM32MP157Cxx */
+  #include "stm32mp157cxx_cm4.h"
+#elif defined(STM32MP157Axx)
+  #include "stm32mp157axx_cm4.h"
+#elif defined(STM32MP157Cxx)
+  #include "stm32mp157cxx_cm4.h"
+#elif defined(STM32MP157Dxx)
+  #include "stm32mp157dxx_cm4.h"
+#elif defined(STM32MP157Fxx)
+  #include "stm32mp157fxx_cm4.h"
+#elif defined(STM32MP153Axx)
+  #include "stm32mp153axx_cm4.h"
+#elif defined(STM32MP153Cxx)
+  #include "stm32mp153cxx_cm4.h"
+#elif defined(STM32MP153Dxx)
+  #include "stm32mp153dxx_cm4.h"
+#elif defined(STM32MP153Fxx)
+  #include "stm32mp153fxx_cm4.h"
+#elif defined(STM32MP151Axx)
+  #include "stm32mp151axx_cm4.h"
+#elif defined(STM32MP151Cxx)
+  #include "stm32mp151cxx_cm4.h"
+#elif defined(STM32MP151Dxx)
+  #include "stm32mp151dxx_cm4.h"
+#elif defined(STM32MP151Fxx)
+  #include "stm32mp151fxx_cm4.h"
+#else
+ #error "Please select first the target STM32MP1xx device used in your application (in stm32mp1xx.h file)"
+#endif
+#endif
+
+#if defined(CORE_CA7)
+#if defined(STM32MP15xx)  /* keep for backward compatibility STM32MP15xx = STM32MP157Cxx */
+  #include "stm32mp157cxx_ca7.h"
+#elif defined(STM32MP157Axx)
+  #include "stm32mp157axx_ca7.h"
+#elif defined(STM32MP157Cxx)
+  #include "stm32mp157cxx_ca7.h"
+#elif defined(STM32MP157Dxx)
+  #include "stm32mp157dxx_ca7.h"
+#elif defined(STM32MP157Fxx)
+  #include "stm32mp157fxx_ca7.h"
+#elif defined(STM32MP153Axx)
+  #include "stm32mp153axx_ca7.h"
+#elif defined(STM32MP153Cxx)
+  #include "stm32mp153cxx_ca7.h"
+#elif defined(STM32MP153Dxx)
+  #include "stm32mp153dxx_ca7.h"
+#elif defined(STM32MP153Fxx)
+  #include "stm32mp153fxx_ca7.h"
+#elif defined(STM32MP151Axx)
+  #include "stm32mp151axx_ca7.h"
+#elif defined(STM32MP151Cxx)
+  #include "stm32mp151cxx_ca7.h"
+#elif defined(STM32MP151Dxx)
+  #include "stm32mp151dxx_ca7.h"
+#elif defined(STM32MP151Fxx)
+  #include "stm32mp151fxx_ca7.h"
+#else
+ #error "Please select first the target STM32MP1xx device used in your application (in stm32mp1xx.h file)"
+#endif
+#endif
+
+/**
+  * @}
+  */
+
+/** @addtogroup Exported_types
+  * @{
+  */
+typedef enum
+{
+  RESET = 0,
+  SET = !RESET
+} FlagStatus, ITStatus;
+
+typedef enum
+{
+  DISABLE = 0,
+  ENABLE = !DISABLE
+} FunctionalState;
+#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
+
+typedef enum
+{
+  ERROR = 0,
+  SUCCESS = !ERROR
+} ErrorStatus;
+
+/**
+  * @}
+  */
+
+
+/** @addtogroup Exported_macros
+  * @{
+  */
+#define SET_BIT(REG, BIT)     ((REG) |= (BIT))
+
+#define CLEAR_BIT(REG, BIT)   ((REG) &= ~(BIT))
+
+#define READ_BIT(REG, BIT)    ((REG) & (BIT))
+
+#define CLEAR_REG(REG)        ((REG) = (0x0))
+
+#define WRITE_REG(REG, VAL)   ((REG) = (VAL))
+
+#define READ_REG(REG)         ((REG))
+
+#define MODIFY_REG(REG, CLEARMASK, SETMASK)  WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
+
+#define POSITION_VAL(VAL)     (__CLZ(__RBIT(VAL)))
+
+
+/**
+  * @}
+  */
+
+#if defined (USE_HAL_DRIVER)
+ #include "stm32mp1xx_hal.h"
+#endif /* USE_HAL_DRIVER */
+
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __STM32MP1xx_H */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */

meta-st/meta-st-stm32mp-addons/mx/stm32mp157d-vrpmdv-mon-mx/Drivers/CMSIS/Device/ST/STM32MP1xx/Include/system_stm32mp1xx.h

@@ -0,0 +1,104 @@
+/**
+  ******************************************************************************
+  * @file    system_stm32mp1xx.h
+  * @author  MCD Application Team
+  * @brief   CMSIS Cortex-Mx Device System Source File for STM32MP1xx devices.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+
+/** @addtogroup CMSIS
+  * @{
+  */
+
+/** @addtogroup stm32mp1xx_system
+  * @{
+  */
+
+/**
+  * @brief Define to prevent recursive inclusion
+  */
+#ifndef __SYSTEM_STM32MP1XX_H
+#define __SYSTEM_STM32MP1XX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+
+/** @addtogroup STM32MP1xx_System_Includes
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+
+/** @addtogroup STM32MP1xx_System_Exported_types
+  * @{
+  */
+  /* This variable is updated in three ways:
+      1) by calling CMSIS function SystemCoreClockUpdate()
+      2) by calling HAL API function HAL_RCC_GetSysClockFreq()
+      3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
+         Note: If you use this function to configure the system clock; then there
+               is no need to call the 2 first functions listed above, since SystemCoreClock
+               variable is updated automatically.
+  */
+extern uint32_t SystemCoreClock;          /*!< System Core1 Clock Frequency  */
+extern uint32_t SystemCore1Clock;         /*!< System Core1 Clock Frequency  */
+extern uint32_t SystemCore2Clock;         /*!< System Core2 Clock Frequency  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32MP1xx_System_Exported_Constants
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32MP1xx_System_Exported_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32MP1xx_System_Exported_Functions
+  * @{
+  */
+
+extern void SystemInit(void);
+extern void SystemCoreClockUpdate(void);
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__SYSTEM_STM32MP1XX_H */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */

meta-st/meta-st-stm32mp-addons/mx/stm32mp157d-vrpmdv-mon-mx/Drivers/CMSIS/Device/ST/STM32MP1xx/LICENSE.txt

@@ -0,0 +1,6 @@
+This software component is provided to you as part of a software package and
+applicable license terms are in the  Package_license file. If you received this
+software component outside of a package or without applicable license terms,
+the terms of the Apache-2.0 license shall apply. 
+You may obtain a copy of the Apache-2.0 at:
+https://opensource.org/licenses/Apache-2.0

meta-st/meta-st-stm32mp-addons/mx/stm32mp157d-vrpmdv-mon-mx/Drivers/CMSIS/Include/cmsis_armcc.h

@@ -0,0 +1,894 @@
+/**************************************************************************//**
+ * @file     cmsis_armcc.h
+ * @brief    CMSIS compiler ARMCC (Arm Compiler 5) header file
+ * @version  V5.1.0
+ * @date     08. May 2019
+ ******************************************************************************/
+/*
+ * Copyright (c) 2009-2019 Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef __CMSIS_ARMCC_H
+#define __CMSIS_ARMCC_H
+
+
+#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 400677)
+  #error "Please use Arm Compiler Toolchain V4.0.677 or later!"
+#endif
+
+/* CMSIS compiler control architecture macros */
+#if ((defined (__TARGET_ARCH_6_M  ) && (__TARGET_ARCH_6_M   == 1)) || \
+     (defined (__TARGET_ARCH_6S_M ) && (__TARGET_ARCH_6S_M  == 1))   )
+  #define __ARM_ARCH_6M__           1
+#endif
+
+#if (defined (__TARGET_ARCH_7_M ) && (__TARGET_ARCH_7_M  == 1))
+  #define __ARM_ARCH_7M__           1
+#endif
+
+#if (defined (__TARGET_ARCH_7E_M) && (__TARGET_ARCH_7E_M == 1))
+  #define __ARM_ARCH_7EM__          1
+#endif
+
+  /* __ARM_ARCH_8M_BASE__  not applicable */
+  /* __ARM_ARCH_8M_MAIN__  not applicable */
+
+/* CMSIS compiler control DSP macros */
+#if ((defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1))     )
+  #define __ARM_FEATURE_DSP         1
+#endif
+
+/* CMSIS compiler specific defines */
+#ifndef   __ASM
+  #define __ASM                                  __asm
+#endif
+#ifndef   __INLINE
+  #define __INLINE                               __inline
+#endif
+#ifndef   __STATIC_INLINE
+  #define __STATIC_INLINE                        static __inline
+#endif
+#ifndef   __STATIC_FORCEINLINE                 
+  #define __STATIC_FORCEINLINE                   static __forceinline
+#endif           
+#ifndef   __NO_RETURN
+  #define __NO_RETURN                            __declspec(noreturn)
+#endif
+#ifndef   __USED
+  #define __USED                                 __attribute__((used))
+#endif
+#ifndef   __WEAK
+  #define __WEAK                                 __attribute__((weak))
+#endif
+#ifndef   __PACKED
+  #define __PACKED                               __attribute__((packed))
+#endif
+#ifndef   __PACKED_STRUCT
+  #define __PACKED_STRUCT                        __packed struct
+#endif
+#ifndef   __PACKED_UNION
+  #define __PACKED_UNION                         __packed union
+#endif
+#ifndef   __UNALIGNED_UINT32        /* deprecated */
+  #define __UNALIGNED_UINT32(x)                  (*((__packed uint32_t *)(x)))
+#endif
+#ifndef   __UNALIGNED_UINT16_WRITE
+  #define __UNALIGNED_UINT16_WRITE(addr, val)    ((*((__packed uint16_t *)(addr))) = (val))
+#endif
+#ifndef   __UNALIGNED_UINT16_READ
+  #define __UNALIGNED_UINT16_READ(addr)          (*((const __packed uint16_t *)(addr)))
+#endif
+#ifndef   __UNALIGNED_UINT32_WRITE
+  #define __UNALIGNED_UINT32_WRITE(addr, val)    ((*((__packed uint32_t *)(addr))) = (val))
+#endif
+#ifndef   __UNALIGNED_UINT32_READ
+  #define __UNALIGNED_UINT32_READ(addr)          (*((const __packed uint32_t *)(addr)))
+#endif
+#ifndef   __ALIGNED
+  #define __ALIGNED(x)                           __attribute__((aligned(x)))
+#endif
+#ifndef   __RESTRICT
+  #define __RESTRICT                             __restrict
+#endif
+#ifndef   __COMPILER_BARRIER
+  #define __COMPILER_BARRIER()                   __memory_changed()
+#endif
+
+/* #########################  Startup and Lowlevel Init  ######################## */
+
+#ifndef __PROGRAM_START
+#define __PROGRAM_START           __main
+#endif
+
+#ifndef __INITIAL_SP
+#define __INITIAL_SP              Image$$ARM_LIB_STACK$$ZI$$Limit
+#endif
+
+#ifndef __STACK_LIMIT
+#define __STACK_LIMIT             Image$$ARM_LIB_STACK$$ZI$$Base
+#endif
+
+#ifndef __VECTOR_TABLE
+#define __VECTOR_TABLE            __Vectors
+#endif
+
+#ifndef __VECTOR_TABLE_ATTRIBUTE
+#define __VECTOR_TABLE_ATTRIBUTE  __attribute((used, section("RESET")))
+#endif
+
+/* ###########################  Core Function Access  ########################### */
+/** \ingroup  CMSIS_Core_FunctionInterface
+    \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions
+  @{
+ */
+
+/**
+  \brief   Enable IRQ Interrupts
+  \details Enables IRQ interrupts by clearing the I-bit in the CPSR.
+           Can only be executed in Privileged modes.
+ */
+/* intrinsic void __enable_irq();     */
+
+
+/**
+  \brief   Disable IRQ Interrupts
+  \details Disables IRQ interrupts by setting the I-bit in the CPSR.
+           Can only be executed in Privileged modes.
+ */
+/* intrinsic void __disable_irq();    */
+
+/**
+  \brief   Get Control Register
+  \details Returns the content of the Control Register.
+  \return               Control Register value
+ */
+__STATIC_INLINE uint32_t __get_CONTROL(void)
+{
+  register uint32_t __regControl         __ASM("control");
+  return(__regControl);
+}
+
+
+/**
+  \brief   Set Control Register
+  \details Writes the given value to the Control Register.
+  \param [in]    control  Control Register value to set
+ */
+__STATIC_INLINE void __set_CONTROL(uint32_t control)
+{
+  register uint32_t __regControl         __ASM("control");
+  __regControl = control;
+}
+
+
+/**
+  \brief   Get IPSR Register
+  \details Returns the content of the IPSR Register.
+  \return               IPSR Register value
+ */
+__STATIC_INLINE uint32_t __get_IPSR(void)
+{
+  register uint32_t __regIPSR          __ASM("ipsr");
+  return(__regIPSR);
+}
+
+
+/**
+  \brief   Get APSR Register
+  \details Returns the content of the APSR Register.
+  \return               APSR Register value
+ */
+__STATIC_INLINE uint32_t __get_APSR(void)
+{
+  register uint32_t __regAPSR          __ASM("apsr");
+  return(__regAPSR);
+}
+
+
+/**
+  \brief   Get xPSR Register
+  \details Returns the content of the xPSR Register.
+  \return               xPSR Register value
+ */
+__STATIC_INLINE uint32_t __get_xPSR(void)
+{
+  register uint32_t __regXPSR          __ASM("xpsr");
+  return(__regXPSR);
+}
+
+
+/**
+  \brief   Get Process Stack Pointer
+  \details Returns the current value of the Process Stack Pointer (PSP).
+  \return               PSP Register value
+ */
+__STATIC_INLINE uint32_t __get_PSP(void)
+{
+  register uint32_t __regProcessStackPointer  __ASM("psp");
+  return(__regProcessStackPointer);
+}
+
+
+/**
+  \brief   Set Process Stack Pointer
+  \details Assigns the given value to the Process Stack Pointer (PSP).
+  \param [in]    topOfProcStack  Process Stack Pointer value to set
+ */
+__STATIC_INLINE void __set_PSP(uint32_t topOfProcStack)
+{
+  register uint32_t __regProcessStackPointer  __ASM("psp");
+  __regProcessStackPointer = topOfProcStack;
+}
+
+
+/**
+  \brief   Get Main Stack Pointer
+  \details Returns the current value of the Main Stack Pointer (MSP).
+  \return               MSP Register value
+ */
+__STATIC_INLINE uint32_t __get_MSP(void)
+{
+  register uint32_t __regMainStackPointer     __ASM("msp");
+  return(__regMainStackPointer);
+}
+
+
+/**
+  \brief   Set Main Stack Pointer
+  \details Assigns the given value to the Main Stack Pointer (MSP).
+  \param [in]    topOfMainStack  Main Stack Pointer value to set
+ */
+__STATIC_INLINE void __set_MSP(uint32_t topOfMainStack)
+{
+  register uint32_t __regMainStackPointer     __ASM("msp");
+  __regMainStackPointer = topOfMainStack;
+}
+
+
+/**
+  \brief   Get Priority Mask
+  \details Returns the current state of the priority mask bit from the Priority Mask Register.
+  \return               Priority Mask value
+ */
+__STATIC_INLINE uint32_t __get_PRIMASK(void)
+{
+  register uint32_t __regPriMask         __ASM("primask");
+  return(__regPriMask);
+}
+
+
+/**
+  \brief   Set Priority Mask
+  \details Assigns the given value to the Priority Mask Register.
+  \param [in]    priMask  Priority Mask
+ */
+__STATIC_INLINE void __set_PRIMASK(uint32_t priMask)
+{
+  register uint32_t __regPriMask         __ASM("primask");
+  __regPriMask = (priMask);
+}
+
+
+#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__  == 1)) || \
+     (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1))     )
+
+/**
+  \brief   Enable FIQ
+  \details Enables FIQ interrupts by clearing the F-bit in the CPSR.
+           Can only be executed in Privileged modes.
+ */
+#define __enable_fault_irq                __enable_fiq
+
+
+/**
+  \brief   Disable FIQ
+  \details Disables FIQ interrupts by setting the F-bit in the CPSR.
+           Can only be executed in Privileged modes.
+ */
+#define __disable_fault_irq               __disable_fiq
+
+
+/**
+  \brief   Get Base Priority
+  \details Returns the current value of the Base Priority register.
+  \return               Base Priority register value
+ */
+__STATIC_INLINE uint32_t  __get_BASEPRI(void)
+{
+  register uint32_t __regBasePri         __ASM("basepri");
+  return(__regBasePri);
+}
+
+
+/**
+  \brief   Set Base Priority
+  \details Assigns the given value to the Base Priority register.
+  \param [in]    basePri  Base Priority value to set
+ */
+__STATIC_INLINE void __set_BASEPRI(uint32_t basePri)
+{
+  register uint32_t __regBasePri         __ASM("basepri");
+  __regBasePri = (basePri & 0xFFU);
+}
+
+
+/**
+  \brief   Set Base Priority with condition
+  \details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled,
+           or the new value increases the BASEPRI priority level.
+  \param [in]    basePri  Base Priority value to set
+ */
+__STATIC_INLINE void __set_BASEPRI_MAX(uint32_t basePri)
+{
+  register uint32_t __regBasePriMax      __ASM("basepri_max");
+  __regBasePriMax = (basePri & 0xFFU);
+}
+
+
+/**
+  \brief   Get Fault Mask
+  \details Returns the current value of the Fault Mask register.
+  \return               Fault Mask register value
+ */
+__STATIC_INLINE uint32_t __get_FAULTMASK(void)
+{
+  register uint32_t __regFaultMask       __ASM("faultmask");
+  return(__regFaultMask);
+}
+
+
+/**
+  \brief   Set Fault Mask
+  \details Assigns the given value to the Fault Mask register.
+  \param [in]    faultMask  Fault Mask value to set
+ */
+__STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask)
+{
+  register uint32_t __regFaultMask       __ASM("faultmask");
+  __regFaultMask = (faultMask & (uint32_t)1U);
+}
+
+#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__  == 1)) || \
+           (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1))     ) */
+
+
+/**
+  \brief   Get FPSCR
+  \details Returns the current value of the Floating Point Status/Control register.
+  \return               Floating Point Status/Control register value
+ */
+__STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \
+     (defined (__FPU_USED   ) && (__FPU_USED    == 1U))     )
+  register uint32_t __regfpscr         __ASM("fpscr");
+  return(__regfpscr);
+#else
+   return(0U);
+#endif
+}
+
+
+/**
+  \brief   Set FPSCR
+  \details Assigns the given value to the Floating Point Status/Control register.
+  \param [in]    fpscr  Floating Point Status/Control value to set
+ */
+__STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \
+     (defined (__FPU_USED   ) && (__FPU_USED    == 1U))     )
+  register uint32_t __regfpscr         __ASM("fpscr");
+  __regfpscr = (fpscr);
+#else
+  (void)fpscr;
+#endif
+}
+
+
+/*@} end of CMSIS_Core_RegAccFunctions */
+
+
+/* ##########################  Core Instruction Access  ######################### */
+/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface
+  Access to dedicated instructions
+  @{
+*/
+
+/**
+  \brief   No Operation
+  \details No Operation does nothing. This instruction can be used for code alignment purposes.
+ */
+#define __NOP                             __nop
+
+
+/**
+  \brief   Wait For Interrupt
+  \details Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs.
+ */
+#define __WFI                             __wfi
+
+
+/**
+  \brief   Wait For Event
+  \details Wait For Event is a hint instruction that permits the processor to enter
+           a low-power state until one of a number of events occurs.
+ */
+#define __WFE                             __wfe
+
+
+/**
+  \brief   Send Event
+  \details Send Event is a hint instruction. It causes an event to be signaled to the CPU.
+ */
+#define __SEV                             __sev
+
+
+/**
+  \brief   Instruction Synchronization Barrier
+  \details Instruction Synchronization Barrier flushes the pipeline in the processor,
+           so that all instructions following the ISB are fetched from cache or memory,
+           after the instruction has been completed.
+ */
+#define __ISB() do {\
+                   __schedule_barrier();\
+                   __isb(0xF);\
+                   __schedule_barrier();\
+                } while (0U)
+
+/**
+  \brief   Data Synchronization Barrier
+  \details Acts as a special kind of Data Memory Barrier.
+           It completes when all explicit memory accesses before this instruction complete.
+ */
+#define __DSB() do {\
+                   __schedule_barrier();\
+                   __dsb(0xF);\
+                   __schedule_barrier();\
+                } while (0U)
+
+/**
+  \brief   Data Memory Barrier
+  \details Ensures the apparent order of the explicit memory operations before
+           and after the instruction, without ensuring their completion.
+ */
+#define __DMB() do {\
+                   __schedule_barrier();\
+                   __dmb(0xF);\
+                   __schedule_barrier();\
+                } while (0U)
+
+                  
+/**
+  \brief   Reverse byte order (32 bit)
+  \details Reverses the byte order in unsigned integer value. For example, 0x12345678 becomes 0x78563412.
+  \param [in]    value  Value to reverse
+  \return               Reversed value
+ */
+#define __REV                             __rev
+
+
+/**
+  \brief   Reverse byte order (16 bit)
+  \details Reverses the byte order within each halfword of a word. For example, 0x12345678 becomes 0x34127856.
+  \param [in]    value  Value to reverse
+  \return               Reversed value
+ */
+#ifndef __NO_EMBEDDED_ASM
+__attribute__((section(".rev16_text"))) __STATIC_INLINE __ASM uint32_t __REV16(uint32_t value)
+{
+  rev16 r0, r0
+  bx lr
+}
+#endif
+
+
+/**
+  \brief   Reverse byte order (16 bit)
+  \details Reverses the byte order in a 16-bit value and returns the signed 16-bit result. For example, 0x0080 becomes 0x8000.
+  \param [in]    value  Value to reverse
+  \return               Reversed value
+ */
+#ifndef __NO_EMBEDDED_ASM
+__attribute__((section(".revsh_text"))) __STATIC_INLINE __ASM int16_t __REVSH(int16_t value)
+{
+  revsh r0, r0
+  bx lr
+}
+#endif
+
+
+/**
+  \brief   Rotate Right in unsigned value (32 bit)
+  \details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits.
+  \param [in]    op1  Value to rotate
+  \param [in]    op2  Number of Bits to rotate
+  \return               Rotated value
+ */
+#define __ROR                             __ror
+
+
+/**
+  \brief   Breakpoint
+  \details Causes the processor to enter Debug state.
+           Debug tools can use this to investigate system state when the instruction at a particular address is reached.
+  \param [in]    value  is ignored by the processor.
+                 If required, a debugger can use it to store additional information about the breakpoint.
+ */
+#define __BKPT(value)                       __breakpoint(value)
+
+
+/**
+  \brief   Reverse bit order of value
+  \details Reverses the bit order of the given value.
+  \param [in]    value  Value to reverse
+  \return               Reversed value
+ */
+#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__  == 1)) || \
+     (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1))     )
+  #define __RBIT                          __rbit
+#else
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __RBIT(uint32_t value)
+{
+  uint32_t result;
+  uint32_t s = (4U /*sizeof(v)*/ * 8U) - 1U; /* extra shift needed at end */
+
+  result = value;                      /* r will be reversed bits of v; first get LSB of v */
+  for (value >>= 1U; value != 0U; value >>= 1U)
+  {
+    result <<= 1U;
+    result |= value & 1U;
+    s--;
+  }
+  result <<= s;                        /* shift when v's highest bits are zero */
+  return result;
+}
+#endif
+
+
+/**
+  \brief   Count leading zeros
+  \details Counts the number of leading zeros of a data value.
+  \param [in]  value  Value to count the leading zeros
+  \return             number of leading zeros in value
+ */
+#define __CLZ                             __clz
+
+
+#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__  == 1)) || \
+     (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1))     )
+
+/**
+  \brief   LDR Exclusive (8 bit)
+  \details Executes a exclusive LDR instruction for 8 bit value.
+  \param [in]    ptr  Pointer to data
+  \return             value of type uint8_t at (*ptr)
+ */
+#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
+  #define __LDREXB(ptr)                                                        ((uint8_t ) __ldrex(ptr))
+#else
+  #define __LDREXB(ptr)          _Pragma("push") _Pragma("diag_suppress 3731") ((uint8_t ) __ldrex(ptr))  _Pragma("pop")
+#endif
+
+
+/**
+  \brief   LDR Exclusive (16 bit)
+  \details Executes a exclusive LDR instruction for 16 bit values.
+  \param [in]    ptr  Pointer to data
+  \return        value of type uint16_t at (*ptr)
+ */
+#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
+  #define __LDREXH(ptr)                                                        ((uint16_t) __ldrex(ptr))
+#else
+  #define __LDREXH(ptr)          _Pragma("push") _Pragma("diag_suppress 3731") ((uint16_t) __ldrex(ptr))  _Pragma("pop")
+#endif
+
+
+/**
+  \brief   LDR Exclusive (32 bit)
+  \details Executes a exclusive LDR instruction for 32 bit values.
+  \param [in]    ptr  Pointer to data
+  \return        value of type uint32_t at (*ptr)
+ */
+#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
+  #define __LDREXW(ptr)                                                        ((uint32_t ) __ldrex(ptr))
+#else
+  #define __LDREXW(ptr)          _Pragma("push") _Pragma("diag_suppress 3731") ((uint32_t ) __ldrex(ptr))  _Pragma("pop")
+#endif
+
+
+/**
+  \brief   STR Exclusive (8 bit)
+  \details Executes a exclusive STR instruction for 8 bit values.
+  \param [in]  value  Value to store
+  \param [in]    ptr  Pointer to location
+  \return          0  Function succeeded
+  \return          1  Function failed
+ */
+#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
+  #define __STREXB(value, ptr)                                                 __strex(value, ptr)
+#else
+  #define __STREXB(value, ptr)   _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr)        _Pragma("pop")
+#endif
+
+
+/**
+  \brief   STR Exclusive (16 bit)
+  \details Executes a exclusive STR instruction for 16 bit values.
+  \param [in]  value  Value to store
+  \param [in]    ptr  Pointer to location
+  \return          0  Function succeeded
+  \return          1  Function failed
+ */
+#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
+  #define __STREXH(value, ptr)                                                 __strex(value, ptr)
+#else
+  #define __STREXH(value, ptr)   _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr)        _Pragma("pop")
+#endif
+
+
+/**
+  \brief   STR Exclusive (32 bit)
+  \details Executes a exclusive STR instruction for 32 bit values.
+  \param [in]  value  Value to store
+  \param [in]    ptr  Pointer to location
+  \return          0  Function succeeded
+  \return          1  Function failed
+ */
+#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
+  #define __STREXW(value, ptr)                                                 __strex(value, ptr)
+#else
+  #define __STREXW(value, ptr)   _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr)        _Pragma("pop")
+#endif
+
+
+/**
+  \brief   Remove the exclusive lock
+  \details Removes the exclusive lock which is created by LDREX.
+ */
+#define __CLREX                           __clrex
+
+
+/**
+  \brief   Signed Saturate
+  \details Saturates a signed value.
+  \param [in]  value  Value to be saturated
+  \param [in]    sat  Bit position to saturate to (1..32)
+  \return             Saturated value
+ */
+#define __SSAT                            __ssat
+
+
+/**
+  \brief   Unsigned Saturate
+  \details Saturates an unsigned value.
+  \param [in]  value  Value to be saturated
+  \param [in]    sat  Bit position to saturate to (0..31)
+  \return             Saturated value
+ */
+#define __USAT                            __usat
+
+
+/**
+  \brief   Rotate Right with Extend (32 bit)
+  \details Moves each bit of a bitstring right by one bit.
+           The carry input is shifted in at the left end of the bitstring.
+  \param [in]    value  Value to rotate
+  \return               Rotated value
+ */
+#ifndef __NO_EMBEDDED_ASM
+__attribute__((section(".rrx_text"))) __STATIC_INLINE __ASM uint32_t __RRX(uint32_t value)
+{
+  rrx r0, r0
+  bx lr
+}
+#endif
+
+
+/**
+  \brief   LDRT Unprivileged (8 bit)
+  \details Executes a Unprivileged LDRT instruction for 8 bit value.
+  \param [in]    ptr  Pointer to data
+  \return             value of type uint8_t at (*ptr)
+ */
+#define __LDRBT(ptr)                      ((uint8_t )  __ldrt(ptr))
+
+
+/**
+  \brief   LDRT Unprivileged (16 bit)
+  \details Executes a Unprivileged LDRT instruction for 16 bit values.
+  \param [in]    ptr  Pointer to data
+  \return        value of type uint16_t at (*ptr)
+ */
+#define __LDRHT(ptr)                      ((uint16_t)  __ldrt(ptr))
+
+
+/**
+  \brief   LDRT Unprivileged (32 bit)
+  \details Executes a Unprivileged LDRT instruction for 32 bit values.
+  \param [in]    ptr  Pointer to data
+  \return        value of type uint32_t at (*ptr)
+ */
+#define __LDRT(ptr)                       ((uint32_t ) __ldrt(ptr))
+
+
+/**
+  \brief   STRT Unprivileged (8 bit)
+  \details Executes a Unprivileged STRT instruction for 8 bit values.
+  \param [in]  value  Value to store
+  \param [in]    ptr  Pointer to location
+ */
+#define __STRBT(value, ptr)               __strt(value, ptr)
+
+
+/**
+  \brief   STRT Unprivileged (16 bit)
+  \details Executes a Unprivileged STRT instruction for 16 bit values.
+  \param [in]  value  Value to store
+  \param [in]    ptr  Pointer to location
+ */
+#define __STRHT(value, ptr)               __strt(value, ptr)
+
+
+/**
+  \brief   STRT Unprivileged (32 bit)
+  \details Executes a Unprivileged STRT instruction for 32 bit values.
+  \param [in]  value  Value to store
+  \param [in]    ptr  Pointer to location
+ */
+#define __STRT(value, ptr)                __strt(value, ptr)
+
+#else  /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__  == 1)) || \
+           (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1))     ) */
+
+/**
+  \brief   Signed Saturate
+  \details Saturates a signed value.
+  \param [in]  value  Value to be saturated
+  \param [in]    sat  Bit position to saturate to (1..32)
+  \return             Saturated value
+ */
+__attribute__((always_inline)) __STATIC_INLINE int32_t __SSAT(int32_t val, uint32_t sat)
+{
+  if ((sat >= 1U) && (sat <= 32U))
+  {
+    const int32_t max = (int32_t)((1U << (sat - 1U)) - 1U);
+    const int32_t min = -1 - max ;
+    if (val > max)
+    {
+      return max;
+    }
+    else if (val < min)
+    {
+      return min;
+    }
+  }
+  return val;
+}
+
+/**
+  \brief   Unsigned Saturate
+  \details Saturates an unsigned value.
+  \param [in]  value  Value to be saturated
+  \param [in]    sat  Bit position to saturate to (0..31)
+  \return             Saturated value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __USAT(int32_t val, uint32_t sat)
+{
+  if (sat <= 31U)
+  {
+    const uint32_t max = ((1U << sat) - 1U);
+    if (val > (int32_t)max)
+    {
+      return max;
+    }
+    else if (val < 0)
+    {
+      return 0U;
+    }
+  }
+  return (uint32_t)val;
+}
+
+#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__  == 1)) || \
+           (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1))     ) */
+
+/*@}*/ /* end of group CMSIS_Core_InstructionInterface */
+
+
+/* ###################  Compiler specific Intrinsics  ########################### */
+/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics
+  Access to dedicated SIMD instructions
+  @{
+*/
+
+#if ((defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1))     )
+
+#define __SADD8                           __sadd8
+#define __QADD8                           __qadd8
+#define __SHADD8                          __shadd8
+#define __UADD8                           __uadd8
+#define __UQADD8                          __uqadd8
+#define __UHADD8                          __uhadd8
+#define __SSUB8                           __ssub8
+#define __QSUB8                           __qsub8
+#define __SHSUB8                          __shsub8
+#define __USUB8                           __usub8
+#define __UQSUB8                          __uqsub8
+#define __UHSUB8                          __uhsub8
+#define __SADD16                          __sadd16
+#define __QADD16                          __qadd16
+#define __SHADD16                         __shadd16
+#define __UADD16                          __uadd16
+#define __UQADD16                         __uqadd16
+#define __UHADD16                         __uhadd16
+#define __SSUB16                          __ssub16
+#define __QSUB16                          __qsub16
+#define __SHSUB16                         __shsub16
+#define __USUB16                          __usub16
+#define __UQSUB16                         __uqsub16
+#define __UHSUB16                         __uhsub16
+#define __SASX                            __sasx
+#define __QASX                            __qasx
+#define __SHASX                           __shasx
+#define __UASX                            __uasx
+#define __UQASX                           __uqasx
+#define __UHASX                           __uhasx
+#define __SSAX                            __ssax
+#define __QSAX                            __qsax
+#define __SHSAX                           __shsax
+#define __USAX                            __usax
+#define __UQSAX                           __uqsax
+#define __UHSAX                           __uhsax
+#define __USAD8                           __usad8
+#define __USADA8                          __usada8
+#define __SSAT16                          __ssat16
+#define __USAT16                          __usat16
+#define __UXTB16                          __uxtb16
+#define __UXTAB16                         __uxtab16
+#define __SXTB16                          __sxtb16
+#define __SXTAB16                         __sxtab16
+#define __SMUAD                           __smuad
+#define __SMUADX                          __smuadx
+#define __SMLAD                           __smlad
+#define __SMLADX                          __smladx
+#define __SMLALD                          __smlald
+#define __SMLALDX                         __smlaldx
+#define __SMUSD                           __smusd
+#define __SMUSDX                          __smusdx
+#define __SMLSD                           __smlsd
+#define __SMLSDX                          __smlsdx
+#define __SMLSLD                          __smlsld
+#define __SMLSLDX                         __smlsldx
+#define __SEL                             __sel
+#define __QADD                            __qadd
+#define __QSUB                            __qsub
+
+#define __PKHBT(ARG1,ARG2,ARG3)          ( ((((uint32_t)(ARG1))          ) & 0x0000FFFFUL) |  \
+                                           ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL)  )
+
+#define __PKHTB(ARG1,ARG2,ARG3)          ( ((((uint32_t)(ARG1))          ) & 0xFFFF0000UL) |  \
+                                           ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL)  )
+
+#define __SMMLA(ARG1,ARG2,ARG3)          ( (int32_t)((((int64_t)(ARG1) * (ARG2)) + \
+                                                      ((int64_t)(ARG3) << 32U)     ) >> 32U))
+
+#endif /* ((defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1))     ) */
+/*@} end of group CMSIS_SIMD_intrinsics */
+
+
+#endif /* __CMSIS_ARMCC_H */

meta-st/meta-st-stm32mp-addons/mx/stm32mp157d-vrpmdv-mon-mx/Drivers/CMSIS/Include/cmsis_compiler.h

@@ -0,0 +1,283 @@
+/**************************************************************************//**
+ * @file     cmsis_compiler.h
+ * @brief    CMSIS compiler generic header file
+ * @version  V5.1.0
+ * @date     09. October 2018
+ ******************************************************************************/
+/*
+ * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef __CMSIS_COMPILER_H
+#define __CMSIS_COMPILER_H
+
+#include <stdint.h>
+
+/*
+ * Arm Compiler 4/5
+ */
+#if   defined ( __CC_ARM )
+  #include "cmsis_armcc.h"
+
+
+/*
+ * Arm Compiler 6.6 LTM (armclang)
+ */
+#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) && (__ARMCC_VERSION < 6100100)
+  #include "cmsis_armclang_ltm.h"
+
+  /*
+ * Arm Compiler above 6.10.1 (armclang)
+ */
+#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6100100)
+  #include "cmsis_armclang.h"
+
+
+/*
+ * GNU Compiler
+ */
+#elif defined ( __GNUC__ )
+  #include "cmsis_gcc.h"
+
+
+/*
+ * IAR Compiler
+ */
+#elif defined ( __ICCARM__ )
+  #include <cmsis_iccarm.h>
+
+
+/*
+ * TI Arm Compiler
+ */
+#elif defined ( __TI_ARM__ )
+  #include <cmsis_ccs.h>
+
+  #ifndef   __ASM
+    #define __ASM                                  __asm
+  #endif
+  #ifndef   __INLINE
+    #define __INLINE                               inline
+  #endif
+  #ifndef   __STATIC_INLINE
+    #define __STATIC_INLINE                        static inline
+  #endif
+  #ifndef   __STATIC_FORCEINLINE
+    #define __STATIC_FORCEINLINE                   __STATIC_INLINE
+  #endif
+  #ifndef   __NO_RETURN
+    #define __NO_RETURN                            __attribute__((noreturn))
+  #endif
+  #ifndef   __USED
+    #define __USED                                 __attribute__((used))
+  #endif
+  #ifndef   __WEAK
+    #define __WEAK                                 __attribute__((weak))
+  #endif
+  #ifndef   __PACKED
+    #define __PACKED                               __attribute__((packed))
+  #endif
+  #ifndef   __PACKED_STRUCT
+    #define __PACKED_STRUCT                        struct __attribute__((packed))
+  #endif
+  #ifndef   __PACKED_UNION
+    #define __PACKED_UNION                         union __attribute__((packed))
+  #endif
+  #ifndef   __UNALIGNED_UINT32        /* deprecated */
+    struct __attribute__((packed)) T_UINT32 { uint32_t v; };
+    #define __UNALIGNED_UINT32(x)                  (((struct T_UINT32 *)(x))->v)
+  #endif
+  #ifndef   __UNALIGNED_UINT16_WRITE
+    __PACKED_STRUCT T_UINT16_WRITE { uint16_t v; };
+    #define __UNALIGNED_UINT16_WRITE(addr, val)    (void)((((struct T_UINT16_WRITE *)(void*)(addr))->v) = (val))
+  #endif
+  #ifndef   __UNALIGNED_UINT16_READ
+    __PACKED_STRUCT T_UINT16_READ { uint16_t v; };
+    #define __UNALIGNED_UINT16_READ(addr)          (((const struct T_UINT16_READ *)(const void *)(addr))->v)
+  #endif
+  #ifndef   __UNALIGNED_UINT32_WRITE
+    __PACKED_STRUCT T_UINT32_WRITE { uint32_t v; };
+    #define __UNALIGNED_UINT32_WRITE(addr, val)    (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val))
+  #endif
+  #ifndef   __UNALIGNED_UINT32_READ
+    __PACKED_STRUCT T_UINT32_READ { uint32_t v; };
+    #define __UNALIGNED_UINT32_READ(addr)          (((const struct T_UINT32_READ *)(const void *)(addr))->v)
+  #endif
+  #ifndef   __ALIGNED
+    #define __ALIGNED(x)                           __attribute__((aligned(x)))
+  #endif
+  #ifndef   __RESTRICT
+    #define __RESTRICT                             __restrict
+  #endif
+  #ifndef   __COMPILER_BARRIER
+    #warning No compiler specific solution for __COMPILER_BARRIER. __COMPILER_BARRIER is ignored.
+    #define __COMPILER_BARRIER()                   (void)0
+  #endif
+
+
+/*
+ * TASKING Compiler
+ */
+#elif defined ( __TASKING__ )
+  /*
+   * The CMSIS functions have been implemented as intrinsics in the compiler.
+   * Please use "carm -?i" to get an up to date list of all intrinsics,
+   * Including the CMSIS ones.
+   */
+
+  #ifndef   __ASM
+    #define __ASM                                  __asm
+  #endif
+  #ifndef   __INLINE
+    #define __INLINE                               inline
+  #endif
+  #ifndef   __STATIC_INLINE
+    #define __STATIC_INLINE                        static inline
+  #endif
+  #ifndef   __STATIC_FORCEINLINE
+    #define __STATIC_FORCEINLINE                   __STATIC_INLINE
+  #endif
+  #ifndef   __NO_RETURN
+    #define __NO_RETURN                            __attribute__((noreturn))
+  #endif
+  #ifndef   __USED
+    #define __USED                                 __attribute__((used))
+  #endif
+  #ifndef   __WEAK
+    #define __WEAK                                 __attribute__((weak))
+  #endif
+  #ifndef   __PACKED
+    #define __PACKED                               __packed__
+  #endif
+  #ifndef   __PACKED_STRUCT
+    #define __PACKED_STRUCT                        struct __packed__
+  #endif
+  #ifndef   __PACKED_UNION
+    #define __PACKED_UNION                         union __packed__
+  #endif
+  #ifndef   __UNALIGNED_UINT32        /* deprecated */
+    struct __packed__ T_UINT32 { uint32_t v; };
+    #define __UNALIGNED_UINT32(x)                  (((struct T_UINT32 *)(x))->v)
+  #endif
+  #ifndef   __UNALIGNED_UINT16_WRITE
+    __PACKED_STRUCT T_UINT16_WRITE { uint16_t v; };
+    #define __UNALIGNED_UINT16_WRITE(addr, val)    (void)((((struct T_UINT16_WRITE *)(void *)(addr))->v) = (val))
+  #endif
+  #ifndef   __UNALIGNED_UINT16_READ
+    __PACKED_STRUCT T_UINT16_READ { uint16_t v; };
+    #define __UNALIGNED_UINT16_READ(addr)          (((const struct T_UINT16_READ *)(const void *)(addr))->v)
+  #endif
+  #ifndef   __UNALIGNED_UINT32_WRITE
+    __PACKED_STRUCT T_UINT32_WRITE { uint32_t v; };
+    #define __UNALIGNED_UINT32_WRITE(addr, val)    (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val))
+  #endif
+  #ifndef   __UNALIGNED_UINT32_READ
+    __PACKED_STRUCT T_UINT32_READ { uint32_t v; };
+    #define __UNALIGNED_UINT32_READ(addr)          (((const struct T_UINT32_READ *)(const void *)(addr))->v)
+  #endif
+  #ifndef   __ALIGNED
+    #define __ALIGNED(x)              __align(x)
+  #endif
+  #ifndef   __RESTRICT
+    #warning No compiler specific solution for __RESTRICT. __RESTRICT is ignored.
+    #define __RESTRICT
+  #endif
+  #ifndef   __COMPILER_BARRIER
+    #warning No compiler specific solution for __COMPILER_BARRIER. __COMPILER_BARRIER is ignored.
+    #define __COMPILER_BARRIER()                   (void)0
+  #endif
+
+
+/*
+ * COSMIC Compiler
+ */
+#elif defined ( __CSMC__ )
+   #include <cmsis_csm.h>
+
+ #ifndef   __ASM
+    #define __ASM                                  _asm
+  #endif
+  #ifndef   __INLINE
+    #define __INLINE                               inline
+  #endif
+  #ifndef   __STATIC_INLINE
+    #define __STATIC_INLINE                        static inline
+  #endif
+  #ifndef   __STATIC_FORCEINLINE
+    #define __STATIC_FORCEINLINE                   __STATIC_INLINE
+  #endif
+  #ifndef   __NO_RETURN
+    // NO RETURN is automatically detected hence no warning here
+    #define __NO_RETURN
+  #endif
+  #ifndef   __USED
+    #warning No compiler specific solution for __USED. __USED is ignored.
+    #define __USED
+  #endif
+  #ifndef   __WEAK
+    #define __WEAK                                 __weak
+  #endif
+  #ifndef   __PACKED
+    #define __PACKED                               @packed
+  #endif
+  #ifndef   __PACKED_STRUCT
+    #define __PACKED_STRUCT                        @packed struct
+  #endif
+  #ifndef   __PACKED_UNION
+    #define __PACKED_UNION                         @packed union
+  #endif
+  #ifndef   __UNALIGNED_UINT32        /* deprecated */
+    @packed struct T_UINT32 { uint32_t v; };
+    #define __UNALIGNED_UINT32(x)                  (((struct T_UINT32 *)(x))->v)
+  #endif
+  #ifndef   __UNALIGNED_UINT16_WRITE
+    __PACKED_STRUCT T_UINT16_WRITE { uint16_t v; };
+    #define __UNALIGNED_UINT16_WRITE(addr, val)    (void)((((struct T_UINT16_WRITE *)(void *)(addr))->v) = (val))
+  #endif
+  #ifndef   __UNALIGNED_UINT16_READ
+    __PACKED_STRUCT T_UINT16_READ { uint16_t v; };
+    #define __UNALIGNED_UINT16_READ(addr)          (((const struct T_UINT16_READ *)(const void *)(addr))->v)
+  #endif
+  #ifndef   __UNALIGNED_UINT32_WRITE
+    __PACKED_STRUCT T_UINT32_WRITE { uint32_t v; };
+    #define __UNALIGNED_UINT32_WRITE(addr, val)    (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val))
+  #endif
+  #ifndef   __UNALIGNED_UINT32_READ
+    __PACKED_STRUCT T_UINT32_READ { uint32_t v; };
+    #define __UNALIGNED_UINT32_READ(addr)          (((const struct T_UINT32_READ *)(const void *)(addr))->v)
+  #endif
+  #ifndef   __ALIGNED
+    #warning No compiler specific solution for __ALIGNED. __ALIGNED is ignored.
+    #define __ALIGNED(x)
+  #endif
+  #ifndef   __RESTRICT
+    #warning No compiler specific solution for __RESTRICT. __RESTRICT is ignored.
+    #define __RESTRICT
+  #endif
+  #ifndef   __COMPILER_BARRIER
+    #warning No compiler specific solution for __COMPILER_BARRIER. __COMPILER_BARRIER is ignored.
+    #define __COMPILER_BARRIER()                   (void)0
+  #endif
+
+
+#else
+  #error Unknown compiler.
+#endif
+
+
+#endif /* __CMSIS_COMPILER_H */
+

meta-st/meta-st-stm32mp-addons/mx/stm32mp157d-vrpmdv-mon-mx/Drivers/CMSIS/Include/cmsis_iccarm.h

@@ -0,0 +1,964 @@
+/**************************************************************************//**
+ * @file     cmsis_iccarm.h
+ * @brief    CMSIS compiler ICCARM (IAR Compiler for Arm) header file
+ * @version  V5.1.0
+ * @date     08. May 2019
+ ******************************************************************************/
+
+//------------------------------------------------------------------------------
+//
+// Copyright (c) 2017-2019 IAR Systems
+// Copyright (c) 2017-2019 Arm Limited. All rights reserved. 
+//
+// Licensed under the Apache License, Version 2.0 (the "License")
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//     http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+//
+//------------------------------------------------------------------------------
+
+
+#ifndef __CMSIS_ICCARM_H__
+#define __CMSIS_ICCARM_H__
+
+#ifndef __ICCARM__
+  #error This file should only be compiled by ICCARM
+#endif
+
+#pragma system_include
+
+#define __IAR_FT _Pragma("inline=forced") __intrinsic
+
+#if (__VER__ >= 8000000)
+  #define __ICCARM_V8 1
+#else
+  #define __ICCARM_V8 0
+#endif
+
+#ifndef __ALIGNED
+  #if __ICCARM_V8
+    #define __ALIGNED(x) __attribute__((aligned(x)))
+  #elif (__VER__ >= 7080000)
+    /* Needs IAR language extensions */
+    #define __ALIGNED(x) __attribute__((aligned(x)))
+  #else
+    #warning No compiler specific solution for __ALIGNED.__ALIGNED is ignored.
+    #define __ALIGNED(x)
+  #endif
+#endif
+
+
+/* Define compiler macros for CPU architecture, used in CMSIS 5.
+ */
+#if __ARM_ARCH_6M__ || __ARM_ARCH_7M__ || __ARM_ARCH_7EM__ || __ARM_ARCH_8M_BASE__ || __ARM_ARCH_8M_MAIN__
+/* Macros already defined */
+#else
+  #if defined(__ARM8M_MAINLINE__) || defined(__ARM8EM_MAINLINE__)
+    #define __ARM_ARCH_8M_MAIN__ 1
+  #elif defined(__ARM8M_BASELINE__)
+    #define __ARM_ARCH_8M_BASE__ 1
+  #elif defined(__ARM_ARCH_PROFILE) && __ARM_ARCH_PROFILE == 'M'
+    #if __ARM_ARCH == 6
+      #define __ARM_ARCH_6M__ 1
+    #elif __ARM_ARCH == 7
+      #if __ARM_FEATURE_DSP
+        #define __ARM_ARCH_7EM__ 1
+      #else
+        #define __ARM_ARCH_7M__ 1
+      #endif
+    #endif /* __ARM_ARCH */
+  #endif /* __ARM_ARCH_PROFILE == 'M' */
+#endif
+
+/* Alternativ core deduction for older ICCARM's */
+#if !defined(__ARM_ARCH_6M__) && !defined(__ARM_ARCH_7M__) && !defined(__ARM_ARCH_7EM__) && \
+    !defined(__ARM_ARCH_8M_BASE__) && !defined(__ARM_ARCH_8M_MAIN__)
+  #if defined(__ARM6M__) && (__CORE__ == __ARM6M__)
+    #define __ARM_ARCH_6M__ 1
+  #elif defined(__ARM7M__) && (__CORE__ == __ARM7M__)
+    #define __ARM_ARCH_7M__ 1
+  #elif defined(__ARM7EM__) && (__CORE__ == __ARM7EM__)
+    #define __ARM_ARCH_7EM__  1
+  #elif defined(__ARM8M_BASELINE__) && (__CORE == __ARM8M_BASELINE__)
+    #define __ARM_ARCH_8M_BASE__ 1
+  #elif defined(__ARM8M_MAINLINE__) && (__CORE == __ARM8M_MAINLINE__)
+    #define __ARM_ARCH_8M_MAIN__ 1
+  #elif defined(__ARM8EM_MAINLINE__) && (__CORE == __ARM8EM_MAINLINE__)
+    #define __ARM_ARCH_8M_MAIN__ 1
+  #else
+    #error "Unknown target."
+  #endif
+#endif
+
+
+
+#if defined(__ARM_ARCH_6M__) && __ARM_ARCH_6M__==1
+  #define __IAR_M0_FAMILY  1
+#elif defined(__ARM_ARCH_8M_BASE__) && __ARM_ARCH_8M_BASE__==1
+  #define __IAR_M0_FAMILY  1
+#else
+  #define __IAR_M0_FAMILY  0
+#endif
+
+
+#ifndef __ASM
+  #define __ASM __asm
+#endif
+
+#ifndef   __COMPILER_BARRIER
+  #define __COMPILER_BARRIER() __ASM volatile("":::"memory")
+#endif
+
+#ifndef __INLINE
+  #define __INLINE inline
+#endif
+
+#ifndef   __NO_RETURN
+  #if __ICCARM_V8
+    #define __NO_RETURN __attribute__((__noreturn__))
+  #else
+    #define __NO_RETURN _Pragma("object_attribute=__noreturn")
+  #endif
+#endif
+
+#ifndef   __PACKED
+  #if __ICCARM_V8
+    #define __PACKED __attribute__((packed, aligned(1)))
+  #else
+    /* Needs IAR language extensions */
+    #define __PACKED __packed
+  #endif
+#endif
+
+#ifndef   __PACKED_STRUCT
+  #if __ICCARM_V8
+    #define __PACKED_STRUCT struct __attribute__((packed, aligned(1)))
+  #else
+    /* Needs IAR language extensions */
+    #define __PACKED_STRUCT __packed struct
+  #endif
+#endif
+
+#ifndef   __PACKED_UNION
+  #if __ICCARM_V8
+    #define __PACKED_UNION union __attribute__((packed, aligned(1)))
+  #else
+    /* Needs IAR language extensions */
+    #define __PACKED_UNION __packed union
+  #endif
+#endif
+
+#ifndef   __RESTRICT
+  #if __ICCARM_V8
+    #define __RESTRICT            __restrict
+  #else
+    /* Needs IAR language extensions */
+    #define __RESTRICT            restrict
+  #endif
+#endif
+
+#ifndef   __STATIC_INLINE
+  #define __STATIC_INLINE       static inline
+#endif
+
+#ifndef   __FORCEINLINE
+  #define __FORCEINLINE         _Pragma("inline=forced")
+#endif
+
+#ifndef   __STATIC_FORCEINLINE
+  #define __STATIC_FORCEINLINE  __FORCEINLINE __STATIC_INLINE
+#endif
+
+#ifndef __UNALIGNED_UINT16_READ
+#pragma language=save
+#pragma language=extended
+__IAR_FT uint16_t __iar_uint16_read(void const *ptr)
+{
+  return *(__packed uint16_t*)(ptr);
+}
+#pragma language=restore
+#define __UNALIGNED_UINT16_READ(PTR) __iar_uint16_read(PTR)
+#endif
+
+
+#ifndef __UNALIGNED_UINT16_WRITE
+#pragma language=save
+#pragma language=extended
+__IAR_FT void __iar_uint16_write(void const *ptr, uint16_t val)
+{
+  *(__packed uint16_t*)(ptr) = val;;
+}
+#pragma language=restore
+#define __UNALIGNED_UINT16_WRITE(PTR,VAL) __iar_uint16_write(PTR,VAL)
+#endif
+
+#ifndef __UNALIGNED_UINT32_READ
+#pragma language=save
+#pragma language=extended
+__IAR_FT uint32_t __iar_uint32_read(void const *ptr)
+{
+  return *(__packed uint32_t*)(ptr);
+}
+#pragma language=restore
+#define __UNALIGNED_UINT32_READ(PTR) __iar_uint32_read(PTR)
+#endif
+
+#ifndef __UNALIGNED_UINT32_WRITE
+#pragma language=save
+#pragma language=extended
+__IAR_FT void __iar_uint32_write(void const *ptr, uint32_t val)
+{
+  *(__packed uint32_t*)(ptr) = val;;
+}
+#pragma language=restore
+#define __UNALIGNED_UINT32_WRITE(PTR,VAL) __iar_uint32_write(PTR,VAL)
+#endif
+
+#ifndef __UNALIGNED_UINT32   /* deprecated */
+#pragma language=save
+#pragma language=extended
+__packed struct  __iar_u32 { uint32_t v; };
+#pragma language=restore
+#define __UNALIGNED_UINT32(PTR) (((struct __iar_u32 *)(PTR))->v)
+#endif
+
+#ifndef   __USED
+  #if __ICCARM_V8
+    #define __USED __attribute__((used))
+  #else
+    #define __USED _Pragma("__root")
+  #endif
+#endif
+
+#ifndef   __WEAK
+  #if __ICCARM_V8
+    #define __WEAK __attribute__((weak))
+  #else
+    #define __WEAK _Pragma("__weak")
+  #endif
+#endif
+
+#ifndef __PROGRAM_START
+#define __PROGRAM_START           __iar_program_start
+#endif
+
+#ifndef __INITIAL_SP
+#define __INITIAL_SP              CSTACK$$Limit
+#endif
+
+#ifndef __STACK_LIMIT
+#define __STACK_LIMIT             CSTACK$$Base
+#endif
+
+#ifndef __VECTOR_TABLE
+#define __VECTOR_TABLE            __vector_table
+#endif
+
+#ifndef __VECTOR_TABLE_ATTRIBUTE
+#define __VECTOR_TABLE_ATTRIBUTE  @".intvec"
+#endif
+
+#ifndef __ICCARM_INTRINSICS_VERSION__
+  #define __ICCARM_INTRINSICS_VERSION__  0
+#endif
+
+#if __ICCARM_INTRINSICS_VERSION__ == 2
+
+  #if defined(__CLZ)
+    #undef __CLZ
+  #endif
+  #if defined(__REVSH)
+    #undef __REVSH
+  #endif
+  #if defined(__RBIT)
+    #undef __RBIT
+  #endif
+  #if defined(__SSAT)
+    #undef __SSAT
+  #endif
+  #if defined(__USAT)
+    #undef __USAT
+  #endif
+
+  #include "iccarm_builtin.h"
+
+  #define __disable_fault_irq __iar_builtin_disable_fiq
+  #define __disable_irq       __iar_builtin_disable_interrupt
+  #define __enable_fault_irq  __iar_builtin_enable_fiq
+  #define __enable_irq        __iar_builtin_enable_interrupt
+  #define __arm_rsr           __iar_builtin_rsr
+  #define __arm_wsr           __iar_builtin_wsr
+
+
+  #define __get_APSR()                (__arm_rsr("APSR"))
+  #define __get_BASEPRI()             (__arm_rsr("BASEPRI"))
+  #define __get_CONTROL()             (__arm_rsr("CONTROL"))
+  #define __get_FAULTMASK()           (__arm_rsr("FAULTMASK"))
+
+  #if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \
+       (defined (__FPU_USED   ) && (__FPU_USED    == 1U))     )
+    #define __get_FPSCR()             (__arm_rsr("FPSCR"))
+    #define __set_FPSCR(VALUE)        (__arm_wsr("FPSCR", (VALUE)))
+  #else
+    #define __get_FPSCR()             ( 0 )
+    #define __set_FPSCR(VALUE)        ((void)VALUE)
+  #endif
+
+  #define __get_IPSR()                (__arm_rsr("IPSR"))
+  #define __get_MSP()                 (__arm_rsr("MSP"))
+  #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \
+       (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3)))
+    // without main extensions, the non-secure MSPLIM is RAZ/WI
+    #define __get_MSPLIM()            (0U)
+  #else
+    #define __get_MSPLIM()            (__arm_rsr("MSPLIM"))
+  #endif
+  #define __get_PRIMASK()             (__arm_rsr("PRIMASK"))
+  #define __get_PSP()                 (__arm_rsr("PSP"))
+
+  #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \
+       (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3)))
+    // without main extensions, the non-secure PSPLIM is RAZ/WI
+    #define __get_PSPLIM()            (0U)
+  #else
+    #define __get_PSPLIM()            (__arm_rsr("PSPLIM"))
+  #endif
+
+  #define __get_xPSR()                (__arm_rsr("xPSR"))
+
+  #define __set_BASEPRI(VALUE)        (__arm_wsr("BASEPRI", (VALUE)))
+  #define __set_BASEPRI_MAX(VALUE)    (__arm_wsr("BASEPRI_MAX", (VALUE)))
+  #define __set_CONTROL(VALUE)        (__arm_wsr("CONTROL", (VALUE)))
+  #define __set_FAULTMASK(VALUE)      (__arm_wsr("FAULTMASK", (VALUE)))
+  #define __set_MSP(VALUE)            (__arm_wsr("MSP", (VALUE)))
+
+  #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \
+       (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3)))
+    // without main extensions, the non-secure MSPLIM is RAZ/WI
+    #define __set_MSPLIM(VALUE)       ((void)(VALUE))
+  #else
+    #define __set_MSPLIM(VALUE)       (__arm_wsr("MSPLIM", (VALUE)))
+  #endif
+  #define __set_PRIMASK(VALUE)        (__arm_wsr("PRIMASK", (VALUE)))
+  #define __set_PSP(VALUE)            (__arm_wsr("PSP", (VALUE)))
+  #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \
+       (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3)))
+    // without main extensions, the non-secure PSPLIM is RAZ/WI
+    #define __set_PSPLIM(VALUE)       ((void)(VALUE))
+  #else
+    #define __set_PSPLIM(VALUE)       (__arm_wsr("PSPLIM", (VALUE)))
+  #endif
+
+  #define __TZ_get_CONTROL_NS()       (__arm_rsr("CONTROL_NS"))
+  #define __TZ_set_CONTROL_NS(VALUE)  (__arm_wsr("CONTROL_NS", (VALUE)))
+  #define __TZ_get_PSP_NS()           (__arm_rsr("PSP_NS"))
+  #define __TZ_set_PSP_NS(VALUE)      (__arm_wsr("PSP_NS", (VALUE)))
+  #define __TZ_get_MSP_NS()           (__arm_rsr("MSP_NS"))
+  #define __TZ_set_MSP_NS(VALUE)      (__arm_wsr("MSP_NS", (VALUE)))
+  #define __TZ_get_SP_NS()            (__arm_rsr("SP_NS"))
+  #define __TZ_set_SP_NS(VALUE)       (__arm_wsr("SP_NS", (VALUE)))
+  #define __TZ_get_PRIMASK_NS()       (__arm_rsr("PRIMASK_NS"))
+  #define __TZ_set_PRIMASK_NS(VALUE)  (__arm_wsr("PRIMASK_NS", (VALUE)))
+  #define __TZ_get_BASEPRI_NS()       (__arm_rsr("BASEPRI_NS"))
+  #define __TZ_set_BASEPRI_NS(VALUE)  (__arm_wsr("BASEPRI_NS", (VALUE)))
+  #define __TZ_get_FAULTMASK_NS()     (__arm_rsr("FAULTMASK_NS"))
+  #define __TZ_set_FAULTMASK_NS(VALUE)(__arm_wsr("FAULTMASK_NS", (VALUE)))
+
+  #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \
+       (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3)))
+    // without main extensions, the non-secure PSPLIM is RAZ/WI
+    #define __TZ_get_PSPLIM_NS()      (0U)
+    #define __TZ_set_PSPLIM_NS(VALUE) ((void)(VALUE))
+  #else
+    #define __TZ_get_PSPLIM_NS()      (__arm_rsr("PSPLIM_NS"))
+    #define __TZ_set_PSPLIM_NS(VALUE) (__arm_wsr("PSPLIM_NS", (VALUE)))
+  #endif
+
+  #define __TZ_get_MSPLIM_NS()        (__arm_rsr("MSPLIM_NS"))
+  #define __TZ_set_MSPLIM_NS(VALUE)   (__arm_wsr("MSPLIM_NS", (VALUE)))
+
+  #define __NOP     __iar_builtin_no_operation
+
+  #define __CLZ     __iar_builtin_CLZ
+  #define __CLREX   __iar_builtin_CLREX
+
+  #define __DMB     __iar_builtin_DMB
+  #define __DSB     __iar_builtin_DSB
+  #define __ISB     __iar_builtin_ISB
+
+  #define __LDREXB  __iar_builtin_LDREXB
+  #define __LDREXH  __iar_builtin_LDREXH
+  #define __LDREXW  __iar_builtin_LDREX
+
+  #define __RBIT    __iar_builtin_RBIT
+  #define __REV     __iar_builtin_REV
+  #define __REV16   __iar_builtin_REV16
+
+  __IAR_FT int16_t __REVSH(int16_t val)
+  {
+    return (int16_t) __iar_builtin_REVSH(val);
+  }
+
+  #define __ROR     __iar_builtin_ROR
+  #define __RRX     __iar_builtin_RRX
+
+  #define __SEV     __iar_builtin_SEV
+
+  #if !__IAR_M0_FAMILY
+    #define __SSAT    __iar_builtin_SSAT
+  #endif
+
+  #define __STREXB  __iar_builtin_STREXB
+  #define __STREXH  __iar_builtin_STREXH
+  #define __STREXW  __iar_builtin_STREX
+
+  #if !__IAR_M0_FAMILY
+    #define __USAT    __iar_builtin_USAT
+  #endif
+
+  #define __WFE     __iar_builtin_WFE
+  #define __WFI     __iar_builtin_WFI
+
+  #if __ARM_MEDIA__
+    #define __SADD8   __iar_builtin_SADD8
+    #define __QADD8   __iar_builtin_QADD8
+    #define __SHADD8  __iar_builtin_SHADD8
+    #define __UADD8   __iar_builtin_UADD8
+    #define __UQADD8  __iar_builtin_UQADD8
+    #define __UHADD8  __iar_builtin_UHADD8
+    #define __SSUB8   __iar_builtin_SSUB8
+    #define __QSUB8   __iar_builtin_QSUB8
+    #define __SHSUB8  __iar_builtin_SHSUB8
+    #define __USUB8   __iar_builtin_USUB8
+    #define __UQSUB8  __iar_builtin_UQSUB8
+    #define __UHSUB8  __iar_builtin_UHSUB8
+    #define __SADD16  __iar_builtin_SADD16
+    #define __QADD16  __iar_builtin_QADD16
+    #define __SHADD16 __iar_builtin_SHADD16
+    #define __UADD16  __iar_builtin_UADD16
+    #define __UQADD16 __iar_builtin_UQADD16
+    #define __UHADD16 __iar_builtin_UHADD16
+    #define __SSUB16  __iar_builtin_SSUB16
+    #define __QSUB16  __iar_builtin_QSUB16
+    #define __SHSUB16 __iar_builtin_SHSUB16
+    #define __USUB16  __iar_builtin_USUB16
+    #define __UQSUB16 __iar_builtin_UQSUB16
+    #define __UHSUB16 __iar_builtin_UHSUB16
+    #define __SASX    __iar_builtin_SASX
+    #define __QASX    __iar_builtin_QASX
+    #define __SHASX   __iar_builtin_SHASX
+    #define __UASX    __iar_builtin_UASX
+    #define __UQASX   __iar_builtin_UQASX
+    #define __UHASX   __iar_builtin_UHASX
+    #define __SSAX    __iar_builtin_SSAX
+    #define __QSAX    __iar_builtin_QSAX
+    #define __SHSAX   __iar_builtin_SHSAX
+    #define __USAX    __iar_builtin_USAX
+    #define __UQSAX   __iar_builtin_UQSAX
+    #define __UHSAX   __iar_builtin_UHSAX
+    #define __USAD8   __iar_builtin_USAD8
+    #define __USADA8  __iar_builtin_USADA8
+    #define __SSAT16  __iar_builtin_SSAT16
+    #define __USAT16  __iar_builtin_USAT16
+    #define __UXTB16  __iar_builtin_UXTB16
+    #define __UXTAB16 __iar_builtin_UXTAB16
+    #define __SXTB16  __iar_builtin_SXTB16
+    #define __SXTAB16 __iar_builtin_SXTAB16
+    #define __SMUAD   __iar_builtin_SMUAD
+    #define __SMUADX  __iar_builtin_SMUADX
+    #define __SMMLA   __iar_builtin_SMMLA
+    #define __SMLAD   __iar_builtin_SMLAD
+    #define __SMLADX  __iar_builtin_SMLADX
+    #define __SMLALD  __iar_builtin_SMLALD
+    #define __SMLALDX __iar_builtin_SMLALDX
+    #define __SMUSD   __iar_builtin_SMUSD
+    #define __SMUSDX  __iar_builtin_SMUSDX
+    #define __SMLSD   __iar_builtin_SMLSD
+    #define __SMLSDX  __iar_builtin_SMLSDX
+    #define __SMLSLD  __iar_builtin_SMLSLD
+    #define __SMLSLDX __iar_builtin_SMLSLDX
+    #define __SEL     __iar_builtin_SEL
+    #define __QADD    __iar_builtin_QADD
+    #define __QSUB    __iar_builtin_QSUB
+    #define __PKHBT   __iar_builtin_PKHBT
+    #define __PKHTB   __iar_builtin_PKHTB
+  #endif
+
+#else /* __ICCARM_INTRINSICS_VERSION__ == 2 */
+
+  #if __IAR_M0_FAMILY
+   /* Avoid clash between intrinsics.h and arm_math.h when compiling for Cortex-M0. */
+    #define __CLZ  __cmsis_iar_clz_not_active
+    #define __SSAT __cmsis_iar_ssat_not_active
+    #define __USAT __cmsis_iar_usat_not_active
+    #define __RBIT __cmsis_iar_rbit_not_active
+    #define __get_APSR  __cmsis_iar_get_APSR_not_active
+  #endif
+
+
+  #if (!((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \
+         (defined (__FPU_USED   ) && (__FPU_USED    == 1U))     ))
+    #define __get_FPSCR __cmsis_iar_get_FPSR_not_active
+    #define __set_FPSCR __cmsis_iar_set_FPSR_not_active
+  #endif
+
+  #ifdef __INTRINSICS_INCLUDED
+  #error intrinsics.h is already included previously!
+  #endif
+
+  #include <intrinsics.h>
+
+  #if __IAR_M0_FAMILY
+   /* Avoid clash between intrinsics.h and arm_math.h when compiling for Cortex-M0. */
+    #undef __CLZ
+    #undef __SSAT
+    #undef __USAT
+    #undef __RBIT
+    #undef __get_APSR
+
+    __STATIC_INLINE uint8_t __CLZ(uint32_t data)
+    {
+      if (data == 0U) { return 32U; }
+
+      uint32_t count = 0U;
+      uint32_t mask = 0x80000000U;
+
+      while ((data & mask) == 0U)
+      {
+        count += 1U;
+        mask = mask >> 1U;
+      }
+      return count;
+    }
+
+    __STATIC_INLINE uint32_t __RBIT(uint32_t v)
+    {
+      uint8_t sc = 31U;
+      uint32_t r = v;
+      for (v >>= 1U; v; v >>= 1U)
+      {
+        r <<= 1U;
+        r |= v & 1U;
+        sc--;
+      }
+      return (r << sc);
+    }
+
+    __STATIC_INLINE  uint32_t __get_APSR(void)
+    {
+      uint32_t res;
+      __asm("MRS      %0,APSR" : "=r" (res));
+      return res;
+    }
+
+  #endif
+
+  #if (!((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \
+         (defined (__FPU_USED   ) && (__FPU_USED    == 1U))     ))
+    #undef __get_FPSCR
+    #undef __set_FPSCR
+    #define __get_FPSCR()       (0)
+    #define __set_FPSCR(VALUE)  ((void)VALUE)
+  #endif
+
+  #pragma diag_suppress=Pe940
+  #pragma diag_suppress=Pe177
+
+  #define __enable_irq    __enable_interrupt
+  #define __disable_irq   __disable_interrupt
+  #define __NOP           __no_operation
+
+  #define __get_xPSR      __get_PSR
+
+  #if (!defined(__ARM_ARCH_6M__) || __ARM_ARCH_6M__==0)
+
+    __IAR_FT uint32_t __LDREXW(uint32_t volatile *ptr)
+    {
+      return __LDREX((unsigned long *)ptr);
+    }
+
+    __IAR_FT uint32_t __STREXW(uint32_t value, uint32_t volatile *ptr)
+    {
+      return __STREX(value, (unsigned long *)ptr);
+    }
+  #endif
+
+
+  /* __CORTEX_M is defined in core_cm0.h, core_cm3.h and core_cm4.h. */
+  #if (__CORTEX_M >= 0x03)
+
+    __IAR_FT uint32_t __RRX(uint32_t value)
+    {
+      uint32_t result;
+      __ASM("RRX      %0, %1" : "=r"(result) : "r" (value) : "cc");
+      return(result);
+    }
+
+    __IAR_FT void __set_BASEPRI_MAX(uint32_t value)
+    {
+      __asm volatile("MSR      BASEPRI_MAX,%0"::"r" (value));
+    }
+
+
+    #define __enable_fault_irq  __enable_fiq
+    #define __disable_fault_irq __disable_fiq
+
+
+  #endif /* (__CORTEX_M >= 0x03) */
+
+  __IAR_FT uint32_t __ROR(uint32_t op1, uint32_t op2)
+  {
+    return (op1 >> op2) | (op1 << ((sizeof(op1)*8)-op2));
+  }
+
+  #if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \
+       (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1))    )
+
+   __IAR_FT uint32_t __get_MSPLIM(void)
+    {
+      uint32_t res;
+    #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \
+         (!defined (__ARM_FEATURE_CMSE  ) || (__ARM_FEATURE_CMSE   < 3)))
+      // without main extensions, the non-secure MSPLIM is RAZ/WI
+      res = 0U;
+    #else
+      __asm volatile("MRS      %0,MSPLIM" : "=r" (res));
+    #endif
+      return res;
+    }
+
+    __IAR_FT void   __set_MSPLIM(uint32_t value)
+    {
+    #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \
+         (!defined (__ARM_FEATURE_CMSE  ) || (__ARM_FEATURE_CMSE   < 3)))
+      // without main extensions, the non-secure MSPLIM is RAZ/WI
+      (void)value;
+    #else
+      __asm volatile("MSR      MSPLIM,%0" :: "r" (value));
+    #endif
+    }
+
+    __IAR_FT uint32_t __get_PSPLIM(void)
+    {
+      uint32_t res;
+    #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \
+         (!defined (__ARM_FEATURE_CMSE  ) || (__ARM_FEATURE_CMSE   < 3)))
+      // without main extensions, the non-secure PSPLIM is RAZ/WI
+      res = 0U;
+    #else
+      __asm volatile("MRS      %0,PSPLIM" : "=r" (res));
+    #endif
+      return res;
+    }
+
+    __IAR_FT void   __set_PSPLIM(uint32_t value)
+    {
+    #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \
+         (!defined (__ARM_FEATURE_CMSE  ) || (__ARM_FEATURE_CMSE   < 3)))
+      // without main extensions, the non-secure PSPLIM is RAZ/WI
+      (void)value;
+    #else
+      __asm volatile("MSR      PSPLIM,%0" :: "r" (value));
+    #endif
+    }
+
+    __IAR_FT uint32_t __TZ_get_CONTROL_NS(void)
+    {
+      uint32_t res;
+      __asm volatile("MRS      %0,CONTROL_NS" : "=r" (res));
+      return res;
+    }
+
+    __IAR_FT void   __TZ_set_CONTROL_NS(uint32_t value)
+    {
+      __asm volatile("MSR      CONTROL_NS,%0" :: "r" (value));
+    }
+
+    __IAR_FT uint32_t   __TZ_get_PSP_NS(void)
+    {
+      uint32_t res;
+      __asm volatile("MRS      %0,PSP_NS" : "=r" (res));
+      return res;
+    }
+
+    __IAR_FT void   __TZ_set_PSP_NS(uint32_t value)
+    {
+      __asm volatile("MSR      PSP_NS,%0" :: "r" (value));
+    }
+
+    __IAR_FT uint32_t   __TZ_get_MSP_NS(void)
+    {
+      uint32_t res;
+      __asm volatile("MRS      %0,MSP_NS" : "=r" (res));
+      return res;
+    }
+
+    __IAR_FT void   __TZ_set_MSP_NS(uint32_t value)
+    {
+      __asm volatile("MSR      MSP_NS,%0" :: "r" (value));
+    }
+
+    __IAR_FT uint32_t   __TZ_get_SP_NS(void)
+    {
+      uint32_t res;
+      __asm volatile("MRS      %0,SP_NS" : "=r" (res));
+      return res;
+    }
+    __IAR_FT void   __TZ_set_SP_NS(uint32_t value)
+    {
+      __asm volatile("MSR      SP_NS,%0" :: "r" (value));
+    }
+
+    __IAR_FT uint32_t   __TZ_get_PRIMASK_NS(void)
+    {
+      uint32_t res;
+      __asm volatile("MRS      %0,PRIMASK_NS" : "=r" (res));
+      return res;
+    }
+
+    __IAR_FT void   __TZ_set_PRIMASK_NS(uint32_t value)
+    {
+      __asm volatile("MSR      PRIMASK_NS,%0" :: "r" (value));
+    }
+
+    __IAR_FT uint32_t   __TZ_get_BASEPRI_NS(void)
+    {
+      uint32_t res;
+      __asm volatile("MRS      %0,BASEPRI_NS" : "=r" (res));
+      return res;
+    }
+
+    __IAR_FT void   __TZ_set_BASEPRI_NS(uint32_t value)
+    {
+      __asm volatile("MSR      BASEPRI_NS,%0" :: "r" (value));
+    }
+
+    __IAR_FT uint32_t   __TZ_get_FAULTMASK_NS(void)
+    {
+      uint32_t res;
+      __asm volatile("MRS      %0,FAULTMASK_NS" : "=r" (res));
+      return res;
+    }
+
+    __IAR_FT void   __TZ_set_FAULTMASK_NS(uint32_t value)
+    {
+      __asm volatile("MSR      FAULTMASK_NS,%0" :: "r" (value));
+    }
+
+    __IAR_FT uint32_t   __TZ_get_PSPLIM_NS(void)
+    {
+      uint32_t res;
+    #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \
+         (!defined (__ARM_FEATURE_CMSE  ) || (__ARM_FEATURE_CMSE   < 3)))
+      // without main extensions, the non-secure PSPLIM is RAZ/WI
+      res = 0U;
+    #else
+      __asm volatile("MRS      %0,PSPLIM_NS" : "=r" (res));
+    #endif
+      return res;
+    }
+
+    __IAR_FT void   __TZ_set_PSPLIM_NS(uint32_t value)
+    {
+    #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \
+         (!defined (__ARM_FEATURE_CMSE  ) || (__ARM_FEATURE_CMSE   < 3)))
+      // without main extensions, the non-secure PSPLIM is RAZ/WI
+      (void)value;
+    #else
+      __asm volatile("MSR      PSPLIM_NS,%0" :: "r" (value));
+    #endif
+    }
+
+    __IAR_FT uint32_t   __TZ_get_MSPLIM_NS(void)
+    {
+      uint32_t res;
+      __asm volatile("MRS      %0,MSPLIM_NS" : "=r" (res));
+      return res;
+    }
+
+    __IAR_FT void   __TZ_set_MSPLIM_NS(uint32_t value)
+    {
+      __asm volatile("MSR      MSPLIM_NS,%0" :: "r" (value));
+    }
+
+  #endif /* __ARM_ARCH_8M_MAIN__ or __ARM_ARCH_8M_BASE__ */
+
+#endif   /* __ICCARM_INTRINSICS_VERSION__ == 2 */
+
+#define __BKPT(value)    __asm volatile ("BKPT     %0" : : "i"(value))
+
+#if __IAR_M0_FAMILY
+  __STATIC_INLINE int32_t __SSAT(int32_t val, uint32_t sat)
+  {
+    if ((sat >= 1U) && (sat <= 32U))
+    {
+      const int32_t max = (int32_t)((1U << (sat - 1U)) - 1U);
+      const int32_t min = -1 - max ;
+      if (val > max)
+      {
+        return max;
+      }
+      else if (val < min)
+      {
+        return min;
+      }
+    }
+    return val;
+  }
+
+  __STATIC_INLINE uint32_t __USAT(int32_t val, uint32_t sat)
+  {
+    if (sat <= 31U)
+    {
+      const uint32_t max = ((1U << sat) - 1U);
+      if (val > (int32_t)max)
+      {
+        return max;
+      }
+      else if (val < 0)
+      {
+        return 0U;
+      }
+    }
+    return (uint32_t)val;
+  }
+#endif
+
+#if (__CORTEX_M >= 0x03)   /* __CORTEX_M is defined in core_cm0.h, core_cm3.h and core_cm4.h. */
+
+  __IAR_FT uint8_t __LDRBT(volatile uint8_t *addr)
+  {
+    uint32_t res;
+    __ASM("LDRBT %0, [%1]" : "=r" (res) : "r" (addr) : "memory");
+    return ((uint8_t)res);
+  }
+
+  __IAR_FT uint16_t __LDRHT(volatile uint16_t *addr)
+  {
+    uint32_t res;
+    __ASM("LDRHT %0, [%1]" : "=r" (res) : "r" (addr) : "memory");
+    return ((uint16_t)res);
+  }
+
+  __IAR_FT uint32_t __LDRT(volatile uint32_t *addr)
+  {
+    uint32_t res;
+    __ASM("LDRT %0, [%1]" : "=r" (res) : "r" (addr) : "memory");
+    return res;
+  }
+
+  __IAR_FT void __STRBT(uint8_t value, volatile uint8_t *addr)
+  {
+    __ASM("STRBT %1, [%0]" : : "r" (addr), "r" ((uint32_t)value) : "memory");
+  }
+
+  __IAR_FT void __STRHT(uint16_t value, volatile uint16_t *addr)
+  {
+    __ASM("STRHT %1, [%0]" : : "r" (addr), "r" ((uint32_t)value) : "memory");
+  }
+
+  __IAR_FT void __STRT(uint32_t value, volatile uint32_t *addr)
+  {
+    __ASM("STRT %1, [%0]" : : "r" (addr), "r" (value) : "memory");
+  }
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \
+     (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1))    )
+
+
+  __IAR_FT uint8_t __LDAB(volatile uint8_t *ptr)
+  {
+    uint32_t res;
+    __ASM volatile ("LDAB %0, [%1]" : "=r" (res) : "r" (ptr) : "memory");
+    return ((uint8_t)res);
+  }
+
+  __IAR_FT uint16_t __LDAH(volatile uint16_t *ptr)
+  {
+    uint32_t res;
+    __ASM volatile ("LDAH %0, [%1]" : "=r" (res) : "r" (ptr) : "memory");
+    return ((uint16_t)res);
+  }
+
+  __IAR_FT uint32_t __LDA(volatile uint32_t *ptr)
+  {
+    uint32_t res;
+    __ASM volatile ("LDA %0, [%1]" : "=r" (res) : "r" (ptr) : "memory");
+    return res;
+  }
+
+  __IAR_FT void __STLB(uint8_t value, volatile uint8_t *ptr)
+  {
+    __ASM volatile ("STLB %1, [%0]" :: "r" (ptr), "r" (value) : "memory");
+  }
+
+  __IAR_FT void __STLH(uint16_t value, volatile uint16_t *ptr)
+  {
+    __ASM volatile ("STLH %1, [%0]" :: "r" (ptr), "r" (value) : "memory");
+  }
+
+  __IAR_FT void __STL(uint32_t value, volatile uint32_t *ptr)
+  {
+    __ASM volatile ("STL %1, [%0]" :: "r" (ptr), "r" (value) : "memory");
+  }
+
+  __IAR_FT uint8_t __LDAEXB(volatile uint8_t *ptr)
+  {
+    uint32_t res;
+    __ASM volatile ("LDAEXB %0, [%1]" : "=r" (res) : "r" (ptr) : "memory");
+    return ((uint8_t)res);
+  }
+
+  __IAR_FT uint16_t __LDAEXH(volatile uint16_t *ptr)
+  {
+    uint32_t res;
+    __ASM volatile ("LDAEXH %0, [%1]" : "=r" (res) : "r" (ptr) : "memory");
+    return ((uint16_t)res);
+  }
+
+  __IAR_FT uint32_t __LDAEX(volatile uint32_t *ptr)
+  {
+    uint32_t res;
+    __ASM volatile ("LDAEX %0, [%1]" : "=r" (res) : "r" (ptr) : "memory");
+    return res;
+  }
+
+  __IAR_FT uint32_t __STLEXB(uint8_t value, volatile uint8_t *ptr)
+  {
+    uint32_t res;
+    __ASM volatile ("STLEXB %0, %2, [%1]" : "=r" (res) : "r" (ptr), "r" (value) : "memory");
+    return res;
+  }
+
+  __IAR_FT uint32_t __STLEXH(uint16_t value, volatile uint16_t *ptr)
+  {
+    uint32_t res;
+    __ASM volatile ("STLEXH %0, %2, [%1]" : "=r" (res) : "r" (ptr), "r" (value) : "memory");
+    return res;
+  }
+
+  __IAR_FT uint32_t __STLEX(uint32_t value, volatile uint32_t *ptr)
+  {
+    uint32_t res;
+    __ASM volatile ("STLEX %0, %2, [%1]" : "=r" (res) : "r" (ptr), "r" (value) : "memory");
+    return res;
+  }
+
+#endif /* __ARM_ARCH_8M_MAIN__ or __ARM_ARCH_8M_BASE__ */
+
+#undef __IAR_FT
+#undef __IAR_M0_FAMILY
+#undef __ICCARM_V8
+
+#pragma diag_default=Pe940
+#pragma diag_default=Pe177
+
+#endif /* __CMSIS_ICCARM_H__ */

meta-st/meta-st-stm32mp-addons/mx/stm32mp157d-vrpmdv-mon-mx/Drivers/CMSIS/Include/cmsis_version.h

@@ -0,0 +1,39 @@
+/**************************************************************************//**
+ * @file     cmsis_version.h
+ * @brief    CMSIS Core(M) Version definitions
+ * @version  V5.0.3
+ * @date     24. June 2019
+ ******************************************************************************/
+/*
+ * Copyright (c) 2009-2019 ARM Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#if   defined ( __ICCARM__ )
+  #pragma system_include         /* treat file as system include file for MISRA check */
+#elif defined (__clang__)
+  #pragma clang system_header   /* treat file as system include file */
+#endif
+
+#ifndef __CMSIS_VERSION_H
+#define __CMSIS_VERSION_H
+
+/*  CMSIS Version definitions */
+#define __CM_CMSIS_VERSION_MAIN  ( 5U)                                      /*!< [31:16] CMSIS Core(M) main version */
+#define __CM_CMSIS_VERSION_SUB   ( 3U)                                      /*!< [15:0]  CMSIS Core(M) sub version */
+#define __CM_CMSIS_VERSION       ((__CM_CMSIS_VERSION_MAIN << 16U) | \
+                                   __CM_CMSIS_VERSION_SUB           )       /*!< CMSIS Core(M) version number */
+#endif

meta-st/meta-st-stm32mp-addons/mx/stm32mp157d-vrpmdv-mon-mx/Drivers/CMSIS/Include/core_cm0.h

@@ -0,0 +1,952 @@
+/**************************************************************************//**
+ * @file     core_cm0.h
+ * @brief    CMSIS Cortex-M0 Core Peripheral Access Layer Header File
+ * @version  V5.0.6
+ * @date     13. March 2019
+ ******************************************************************************/
+/*
+ * Copyright (c) 2009-2019 Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#if   defined ( __ICCARM__ )
+  #pragma system_include         /* treat file as system include file for MISRA check */
+#elif defined (__clang__)
+  #pragma clang system_header   /* treat file as system include file */
+#endif
+
+#ifndef __CORE_CM0_H_GENERIC
+#define __CORE_CM0_H_GENERIC
+
+#include <stdint.h>
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/**
+  \page CMSIS_MISRA_Exceptions  MISRA-C:2004 Compliance Exceptions
+  CMSIS violates the following MISRA-C:2004 rules:
+
+   \li Required Rule 8.5, object/function definition in header file.<br>
+     Function definitions in header files are used to allow 'inlining'.
+
+   \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+     Unions are used for effective representation of core registers.
+
+   \li Advisory Rule 19.7, Function-like macro defined.<br>
+     Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ *                 CMSIS definitions
+ ******************************************************************************/
+/**
+  \ingroup Cortex_M0
+  @{
+ */
+
+#include "cmsis_version.h"
+ 
+/*  CMSIS CM0 definitions */
+#define __CM0_CMSIS_VERSION_MAIN  (__CM_CMSIS_VERSION_MAIN)              /*!< \deprecated [31:16] CMSIS HAL main version */
+#define __CM0_CMSIS_VERSION_SUB   (__CM_CMSIS_VERSION_SUB)               /*!< \deprecated [15:0]  CMSIS HAL sub version */
+#define __CM0_CMSIS_VERSION       ((__CM0_CMSIS_VERSION_MAIN << 16U) | \
+                                    __CM0_CMSIS_VERSION_SUB           )  /*!< \deprecated CMSIS HAL version number */
+
+#define __CORTEX_M                (0U)                                   /*!< Cortex-M Core */
+
+/** __FPU_USED indicates whether an FPU is used or not.
+    This core does not support an FPU at all
+*/
+#define __FPU_USED       0U
+
+#if defined ( __CC_ARM )
+  #if defined __TARGET_FPU_VFP
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+  #if defined __ARM_FP
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __GNUC__ )
+  #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __ICCARM__ )
+  #if defined __ARMVFP__
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __TI_ARM__ )
+  #if defined __TI_VFP_SUPPORT__
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __TASKING__ )
+  #if defined __FPU_VFP__
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __CSMC__ )
+  #if ( __CSMC__ & 0x400U)
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#endif
+
+#include "cmsis_compiler.h"               /* CMSIS compiler specific defines */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM0_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM0_H_DEPENDANT
+#define __CORE_CM0_H_DEPENDANT
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+  #ifndef __CM0_REV
+    #define __CM0_REV               0x0000U
+    #warning "__CM0_REV not defined in device header file; using default!"
+  #endif
+
+  #ifndef __NVIC_PRIO_BITS
+    #define __NVIC_PRIO_BITS          2U
+    #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+  #endif
+
+  #ifndef __Vendor_SysTickConfig
+    #define __Vendor_SysTickConfig    0U
+    #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+  #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+    \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+    <strong>IO Type Qualifiers</strong> are used
+    \li to specify the access to peripheral variables.
+    \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+  #define   __I     volatile             /*!< Defines 'read only' permissions */
+#else
+  #define   __I     volatile const       /*!< Defines 'read only' permissions */
+#endif
+#define     __O     volatile             /*!< Defines 'write only' permissions */
+#define     __IO    volatile             /*!< Defines 'read / write' permissions */
+
+/* following defines should be used for structure members */
+#define     __IM     volatile const      /*! Defines 'read only' structure member permissions */
+#define     __OM     volatile            /*! Defines 'write only' structure member permissions */
+#define     __IOM    volatile            /*! Defines 'read / write' structure member permissions */
+
+/*@} end of group Cortex_M0 */
+
+
+
+/*******************************************************************************
+ *                 Register Abstraction
+  Core Register contain:
+  - Core Register
+  - Core NVIC Register
+  - Core SCB Register
+  - Core SysTick Register
+ ******************************************************************************/
+/**
+  \defgroup CMSIS_core_register Defines and Type Definitions
+  \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_CORE  Status and Control Registers
+  \brief      Core Register type definitions.
+  @{
+ */
+
+/**
+  \brief  Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t _reserved0:28;              /*!< bit:  0..27  Reserved */
+    uint32_t V:1;                        /*!< bit:     28  Overflow condition code flag */
+    uint32_t C:1;                        /*!< bit:     29  Carry condition code flag */
+    uint32_t Z:1;                        /*!< bit:     30  Zero condition code flag */
+    uint32_t N:1;                        /*!< bit:     31  Negative condition code flag */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} APSR_Type;
+
+/* APSR Register Definitions */
+#define APSR_N_Pos                         31U                                            /*!< APSR: N Position */
+#define APSR_N_Msk                         (1UL << APSR_N_Pos)                            /*!< APSR: N Mask */
+
+#define APSR_Z_Pos                         30U                                            /*!< APSR: Z Position */
+#define APSR_Z_Msk                         (1UL << APSR_Z_Pos)                            /*!< APSR: Z Mask */
+
+#define APSR_C_Pos                         29U                                            /*!< APSR: C Position */
+#define APSR_C_Msk                         (1UL << APSR_C_Pos)                            /*!< APSR: C Mask */
+
+#define APSR_V_Pos                         28U                                            /*!< APSR: V Position */
+#define APSR_V_Msk                         (1UL << APSR_V_Pos)                            /*!< APSR: V Mask */
+
+
+/**
+  \brief  Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t ISR:9;                      /*!< bit:  0.. 8  Exception number */
+    uint32_t _reserved0:23;              /*!< bit:  9..31  Reserved */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} IPSR_Type;
+
+/* IPSR Register Definitions */
+#define IPSR_ISR_Pos                        0U                                            /*!< IPSR: ISR Position */
+#define IPSR_ISR_Msk                       (0x1FFUL /*<< IPSR_ISR_Pos*/)                  /*!< IPSR: ISR Mask */
+
+
+/**
+  \brief  Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t ISR:9;                      /*!< bit:  0.. 8  Exception number */
+    uint32_t _reserved0:15;              /*!< bit:  9..23  Reserved */
+    uint32_t T:1;                        /*!< bit:     24  Thumb bit        (read 0) */
+    uint32_t _reserved1:3;               /*!< bit: 25..27  Reserved */
+    uint32_t V:1;                        /*!< bit:     28  Overflow condition code flag */
+    uint32_t C:1;                        /*!< bit:     29  Carry condition code flag */
+    uint32_t Z:1;                        /*!< bit:     30  Zero condition code flag */
+    uint32_t N:1;                        /*!< bit:     31  Negative condition code flag */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} xPSR_Type;
+
+/* xPSR Register Definitions */
+#define xPSR_N_Pos                         31U                                            /*!< xPSR: N Position */
+#define xPSR_N_Msk                         (1UL << xPSR_N_Pos)                            /*!< xPSR: N Mask */
+
+#define xPSR_Z_Pos                         30U                                            /*!< xPSR: Z Position */
+#define xPSR_Z_Msk                         (1UL << xPSR_Z_Pos)                            /*!< xPSR: Z Mask */
+
+#define xPSR_C_Pos                         29U                                            /*!< xPSR: C Position */
+#define xPSR_C_Msk                         (1UL << xPSR_C_Pos)                            /*!< xPSR: C Mask */
+
+#define xPSR_V_Pos                         28U                                            /*!< xPSR: V Position */
+#define xPSR_V_Msk                         (1UL << xPSR_V_Pos)                            /*!< xPSR: V Mask */
+
+#define xPSR_T_Pos                         24U                                            /*!< xPSR: T Position */
+#define xPSR_T_Msk                         (1UL << xPSR_T_Pos)                            /*!< xPSR: T Mask */
+
+#define xPSR_ISR_Pos                        0U                                            /*!< xPSR: ISR Position */
+#define xPSR_ISR_Msk                       (0x1FFUL /*<< xPSR_ISR_Pos*/)                  /*!< xPSR: ISR Mask */
+
+
+/**
+  \brief  Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t _reserved0:1;               /*!< bit:      0  Reserved */
+    uint32_t SPSEL:1;                    /*!< bit:      1  Stack to be used */
+    uint32_t _reserved1:30;              /*!< bit:  2..31  Reserved */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} CONTROL_Type;
+
+/* CONTROL Register Definitions */
+#define CONTROL_SPSEL_Pos                   1U                                            /*!< CONTROL: SPSEL Position */
+#define CONTROL_SPSEL_Msk                  (1UL << CONTROL_SPSEL_Pos)                     /*!< CONTROL: SPSEL Mask */
+
+/*@} end of group CMSIS_CORE */
+
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_NVIC  Nested Vectored Interrupt Controller (NVIC)
+  \brief      Type definitions for the NVIC Registers
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+  __IOM uint32_t ISER[1U];               /*!< Offset: 0x000 (R/W)  Interrupt Set Enable Register */
+        uint32_t RESERVED0[31U];
+  __IOM uint32_t ICER[1U];               /*!< Offset: 0x080 (R/W)  Interrupt Clear Enable Register */
+        uint32_t RESERVED1[31U];
+  __IOM uint32_t ISPR[1U];               /*!< Offset: 0x100 (R/W)  Interrupt Set Pending Register */
+        uint32_t RESERVED2[31U];
+  __IOM uint32_t ICPR[1U];               /*!< Offset: 0x180 (R/W)  Interrupt Clear Pending Register */
+        uint32_t RESERVED3[31U];
+        uint32_t RESERVED4[64U];
+  __IOM uint32_t IP[8U];                 /*!< Offset: 0x300 (R/W)  Interrupt Priority Register */
+}  NVIC_Type;
+
+/*@} end of group CMSIS_NVIC */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_SCB     System Control Block (SCB)
+  \brief    Type definitions for the System Control Block Registers
+  @{
+ */
+
+/**
+  \brief  Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+  __IM  uint32_t CPUID;                  /*!< Offset: 0x000 (R/ )  CPUID Base Register */
+  __IOM uint32_t ICSR;                   /*!< Offset: 0x004 (R/W)  Interrupt Control and State Register */
+        uint32_t RESERVED0;
+  __IOM uint32_t AIRCR;                  /*!< Offset: 0x00C (R/W)  Application Interrupt and Reset Control Register */
+  __IOM uint32_t SCR;                    /*!< Offset: 0x010 (R/W)  System Control Register */
+  __IOM uint32_t CCR;                    /*!< Offset: 0x014 (R/W)  Configuration Control Register */
+        uint32_t RESERVED1;
+  __IOM uint32_t SHP[2U];                /*!< Offset: 0x01C (R/W)  System Handlers Priority Registers. [0] is RESERVED */
+  __IOM uint32_t SHCSR;                  /*!< Offset: 0x024 (R/W)  System Handler Control and State Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos          24U                                            /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk          (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos)          /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos              20U                                            /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk              (0xFUL << SCB_CPUID_VARIANT_Pos)               /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos         16U                                            /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk         (0xFUL << SCB_CPUID_ARCHITECTURE_Pos)          /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos                4U                                            /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk               (0xFFFUL << SCB_CPUID_PARTNO_Pos)              /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos              0U                                            /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk             (0xFUL /*<< SCB_CPUID_REVISION_Pos*/)          /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos            31U                                            /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk            (1UL << SCB_ICSR_NMIPENDSET_Pos)               /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos             28U                                            /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk             (1UL << SCB_ICSR_PENDSVSET_Pos)                /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos             27U                                            /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk             (1UL << SCB_ICSR_PENDSVCLR_Pos)                /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos             26U                                            /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk             (1UL << SCB_ICSR_PENDSTSET_Pos)                /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos             25U                                            /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk             (1UL << SCB_ICSR_PENDSTCLR_Pos)                /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos            23U                                            /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk            (1UL << SCB_ICSR_ISRPREEMPT_Pos)               /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos            22U                                            /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk            (1UL << SCB_ICSR_ISRPENDING_Pos)               /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos           12U                                            /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk           (0x1FFUL << SCB_ICSR_VECTPENDING_Pos)          /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos             0U                                            /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk            (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/)       /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos              16U                                            /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk              (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos)            /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos          16U                                            /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk          (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos)        /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos            15U                                            /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk            (1UL << SCB_AIRCR_ENDIANESS_Pos)               /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos           2U                                            /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk          (1UL << SCB_AIRCR_SYSRESETREQ_Pos)             /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos         1U                                            /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk        (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos)           /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos               4U                                            /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk              (1UL << SCB_SCR_SEVONPEND_Pos)                 /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos               2U                                            /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk              (1UL << SCB_SCR_SLEEPDEEP_Pos)                 /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos             1U                                            /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk            (1UL << SCB_SCR_SLEEPONEXIT_Pos)               /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos                9U                                            /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk               (1UL << SCB_CCR_STKALIGN_Pos)                  /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos             3U                                            /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk            (1UL << SCB_CCR_UNALIGN_TRP_Pos)               /*!< SCB CCR: UNALIGN_TRP Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_SVCALLPENDED_Pos         15U                                            /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk         (1UL << SCB_SHCSR_SVCALLPENDED_Pos)            /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_SysTick     System Tick Timer (SysTick)
+  \brief    Type definitions for the System Timer Registers.
+  @{
+ */
+
+/**
+  \brief  Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+  __IOM uint32_t CTRL;                   /*!< Offset: 0x000 (R/W)  SysTick Control and Status Register */
+  __IOM uint32_t LOAD;                   /*!< Offset: 0x004 (R/W)  SysTick Reload Value Register */
+  __IOM uint32_t VAL;                    /*!< Offset: 0x008 (R/W)  SysTick Current Value Register */
+  __IM  uint32_t CALIB;                  /*!< Offset: 0x00C (R/ )  SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos         16U                                            /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk         (1UL << SysTick_CTRL_COUNTFLAG_Pos)            /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos          2U                                            /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk         (1UL << SysTick_CTRL_CLKSOURCE_Pos)            /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos            1U                                            /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk           (1UL << SysTick_CTRL_TICKINT_Pos)              /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos             0U                                            /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk            (1UL /*<< SysTick_CTRL_ENABLE_Pos*/)           /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos             0U                                            /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk            (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/)    /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos             0U                                            /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk            (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/)    /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos            31U                                            /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk            (1UL << SysTick_CALIB_NOREF_Pos)               /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos             30U                                            /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk             (1UL << SysTick_CALIB_SKEW_Pos)                /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos             0U                                            /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk            (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/)    /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_CoreDebug       Core Debug Registers (CoreDebug)
+  \brief    Cortex-M0 Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor.
+            Therefore they are not covered by the Cortex-M0 header file.
+  @{
+ */
+/*@} end of group CMSIS_CoreDebug */
+
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_core_bitfield     Core register bit field macros
+  \brief      Macros for use with bit field definitions (xxx_Pos, xxx_Msk).
+  @{
+ */
+
+/**
+  \brief   Mask and shift a bit field value for use in a register bit range.
+  \param[in] field  Name of the register bit field.
+  \param[in] value  Value of the bit field. This parameter is interpreted as an uint32_t type.
+  \return           Masked and shifted value.
+*/
+#define _VAL2FLD(field, value)    (((uint32_t)(value) << field ## _Pos) & field ## _Msk)
+
+/**
+  \brief     Mask and shift a register value to extract a bit filed value.
+  \param[in] field  Name of the register bit field.
+  \param[in] value  Value of register. This parameter is interpreted as an uint32_t type.
+  \return           Masked and shifted bit field value.
+*/
+#define _FLD2VAL(field, value)    (((uint32_t)(value) & field ## _Msk) >> field ## _Pos)
+
+/*@} end of group CMSIS_core_bitfield */
+
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_core_base     Core Definitions
+  \brief      Definitions for base addresses, unions, and structures.
+  @{
+ */
+
+/* Memory mapping of Core Hardware */
+#define SCS_BASE            (0xE000E000UL)                            /*!< System Control Space Base Address */
+#define SysTick_BASE        (SCS_BASE +  0x0010UL)                    /*!< SysTick Base Address */
+#define NVIC_BASE           (SCS_BASE +  0x0100UL)                    /*!< NVIC Base Address */
+#define SCB_BASE            (SCS_BASE +  0x0D00UL)                    /*!< System Control Block Base Address */
+
+#define SCB                 ((SCB_Type       *)     SCB_BASE      )   /*!< SCB configuration struct */
+#define SysTick             ((SysTick_Type   *)     SysTick_BASE  )   /*!< SysTick configuration struct */
+#define NVIC                ((NVIC_Type      *)     NVIC_BASE     )   /*!< NVIC configuration struct */
+
+
+/*@} */
+
+
+
+/*******************************************************************************
+ *                Hardware Abstraction Layer
+  Core Function Interface contains:
+  - Core NVIC Functions
+  - Core SysTick Functions
+  - Core Register Access Functions
+ ******************************************************************************/
+/**
+  \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ##########################   NVIC functions  #################################### */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+  \brief    Functions that manage interrupts and exceptions via the NVIC.
+  @{
+ */
+
+#ifdef CMSIS_NVIC_VIRTUAL
+  #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE
+    #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h"
+  #endif
+  #include CMSIS_NVIC_VIRTUAL_HEADER_FILE
+#else
+  #define NVIC_SetPriorityGrouping    __NVIC_SetPriorityGrouping
+  #define NVIC_GetPriorityGrouping    __NVIC_GetPriorityGrouping
+  #define NVIC_EnableIRQ              __NVIC_EnableIRQ
+  #define NVIC_GetEnableIRQ           __NVIC_GetEnableIRQ
+  #define NVIC_DisableIRQ             __NVIC_DisableIRQ
+  #define NVIC_GetPendingIRQ          __NVIC_GetPendingIRQ
+  #define NVIC_SetPendingIRQ          __NVIC_SetPendingIRQ
+  #define NVIC_ClearPendingIRQ        __NVIC_ClearPendingIRQ
+/*#define NVIC_GetActive              __NVIC_GetActive             not available for Cortex-M0 */
+  #define NVIC_SetPriority            __NVIC_SetPriority
+  #define NVIC_GetPriority            __NVIC_GetPriority
+  #define NVIC_SystemReset            __NVIC_SystemReset
+#endif /* CMSIS_NVIC_VIRTUAL */
+
+#ifdef CMSIS_VECTAB_VIRTUAL
+  #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE
+    #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h"
+  #endif
+  #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE
+#else
+  #define NVIC_SetVector              __NVIC_SetVector
+  #define NVIC_GetVector              __NVIC_GetVector
+#endif  /* (CMSIS_VECTAB_VIRTUAL) */
+
+#define NVIC_USER_IRQ_OFFSET          16
+
+
+/* The following EXC_RETURN values are saved the LR on exception entry */
+#define EXC_RETURN_HANDLER         (0xFFFFFFF1UL)     /* return to Handler mode, uses MSP after return                               */
+#define EXC_RETURN_THREAD_MSP      (0xFFFFFFF9UL)     /* return to Thread mode, uses MSP after return                                */
+#define EXC_RETURN_THREAD_PSP      (0xFFFFFFFDUL)     /* return to Thread mode, uses PSP after return                                */
+
+
+/* Interrupt Priorities are WORD accessible only under Armv6-M                  */
+/* The following MACROS handle generation of the register offset and byte masks */
+#define _BIT_SHIFT(IRQn)         (  ((((uint32_t)(int32_t)(IRQn))         )      &  0x03UL) * 8UL)
+#define _SHP_IDX(IRQn)           ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >>    2UL)      )
+#define _IP_IDX(IRQn)            (   (((uint32_t)(int32_t)(IRQn))                >>    2UL)      )
+
+#define __NVIC_SetPriorityGrouping(X) (void)(X)
+#define __NVIC_GetPriorityGrouping()  (0U)
+
+/**
+  \brief   Enable Interrupt
+  \details Enables a device specific interrupt in the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    __COMPILER_BARRIER();
+    NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+    __COMPILER_BARRIER();
+  }
+}
+
+
+/**
+  \brief   Get Interrupt Enable status
+  \details Returns a device specific interrupt enable status from the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt is not enabled.
+  \return             1  Interrupt is enabled.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->ISER[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Disable Interrupt
+  \details Disables a device specific interrupt in the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+    __DSB();
+    __ISB();
+  }
+}
+
+
+/**
+  \brief   Get Pending Interrupt
+  \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt status is not pending.
+  \return             1  Interrupt status is pending.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Set Pending Interrupt
+  \details Sets the pending bit of a device specific interrupt in the NVIC pending register.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Clear Pending Interrupt
+  \details Clears the pending bit of a device specific interrupt in the NVIC pending register.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Set Interrupt Priority
+  \details Sets the priority of a device specific interrupt or a processor exception.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]      IRQn  Interrupt number.
+  \param [in]  priority  Priority to set.
+  \note    The priority cannot be set for every processor exception.
+ */
+__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->IP[_IP_IDX(IRQn)]  = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)]  & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+       (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
+  }
+  else
+  {
+    SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+       (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
+  }
+}
+
+
+/**
+  \brief   Get Interrupt Priority
+  \details Reads the priority of a device specific interrupt or a processor exception.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]   IRQn  Interrupt number.
+  \return             Interrupt Priority.
+                      Value is aligned automatically to the implemented priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
+  }
+  else
+  {
+    return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
+  }
+}
+
+
+/**
+  \brief   Encode Priority
+  \details Encodes the priority for an interrupt with the given priority group,
+           preemptive priority value, and subpriority value.
+           In case of a conflict between priority grouping and available
+           priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+  \param [in]     PriorityGroup  Used priority group.
+  \param [in]   PreemptPriority  Preemptive priority value (starting from 0).
+  \param [in]       SubPriority  Subpriority value (starting from 0).
+  \return                        Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
+ */
+__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+  uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL);   /* only values 0..7 are used          */
+  uint32_t PreemptPriorityBits;
+  uint32_t SubPriorityBits;
+
+  PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+  SubPriorityBits     = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+  return (
+           ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) |
+           ((SubPriority     & (uint32_t)((1UL << (SubPriorityBits    )) - 1UL)))
+         );
+}
+
+
+/**
+  \brief   Decode Priority
+  \details Decodes an interrupt priority value with a given priority group to
+           preemptive priority value and subpriority value.
+           In case of a conflict between priority grouping and available
+           priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set.
+  \param [in]         Priority   Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
+  \param [in]     PriorityGroup  Used priority group.
+  \param [out] pPreemptPriority  Preemptive priority value (starting from 0).
+  \param [out]     pSubPriority  Subpriority value (starting from 0).
+ */
+__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority)
+{
+  uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL);   /* only values 0..7 are used          */
+  uint32_t PreemptPriorityBits;
+  uint32_t SubPriorityBits;
+
+  PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+  SubPriorityBits     = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+  *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL);
+  *pSubPriority     = (Priority                   ) & (uint32_t)((1UL << (SubPriorityBits    )) - 1UL);
+}
+
+
+
+/**
+  \brief   Set Interrupt Vector
+  \details Sets an interrupt vector in SRAM based interrupt vector table.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+           Address 0 must be mapped to SRAM.
+  \param [in]   IRQn      Interrupt number
+  \param [in]   vector    Address of interrupt handler function
+ */
+__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector)
+{
+  uint32_t vectors = 0x0U;
+  (* (int *) (vectors + ((int32_t)IRQn + NVIC_USER_IRQ_OFFSET) * 4)) = vector;
+  /* ARM Application Note 321 states that the M0 does not require the architectural barrier */
+}
+
+
+/**
+  \brief   Get Interrupt Vector
+  \details Reads an interrupt vector from interrupt vector table.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]   IRQn      Interrupt number.
+  \return                 Address of interrupt handler function
+ */
+__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn)
+{
+  uint32_t vectors = 0x0U;
+  return (uint32_t)(* (int *) (vectors + ((int32_t)IRQn + NVIC_USER_IRQ_OFFSET) * 4));
+}
+
+
+/**
+  \brief   System Reset
+  \details Initiates a system reset request to reset the MCU.
+ */
+__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void)
+{
+  __DSB();                                                          /* Ensure all outstanding memory accesses included
+                                                                       buffered write are completed before reset */
+  SCB->AIRCR  = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+                 SCB_AIRCR_SYSRESETREQ_Msk);
+  __DSB();                                                          /* Ensure completion of memory access */
+
+  for(;;)                                                           /* wait until reset */
+  {
+    __NOP();
+  }
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+/* ##########################  FPU functions  #################################### */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_FpuFunctions FPU Functions
+  \brief    Function that provides FPU type.
+  @{
+ */
+
+/**
+  \brief   get FPU type
+  \details returns the FPU type
+  \returns
+   - \b  0: No FPU
+   - \b  1: Single precision FPU
+   - \b  2: Double + Single precision FPU
+ */
+__STATIC_INLINE uint32_t SCB_GetFPUType(void)
+{
+    return 0U;           /* No FPU */
+}
+
+
+/*@} end of CMSIS_Core_FpuFunctions */
+
+
+
+/* ##################################    SysTick function  ############################################ */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+  \brief    Functions that configure the System.
+  @{
+ */
+
+#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U)
+
+/**
+  \brief   System Tick Configuration
+  \details Initializes the System Timer and its interrupt, and starts the System Tick Timer.
+           Counter is in free running mode to generate periodic interrupts.
+  \param [in]  ticks  Number of ticks between two interrupts.
+  \return          0  Function succeeded.
+  \return          1  Function failed.
+  \note    When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+           function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+           must contain a vendor-specific implementation of this function.
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+  if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk)
+  {
+    return (1UL);                                                   /* Reload value impossible */
+  }
+
+  SysTick->LOAD  = (uint32_t)(ticks - 1UL);                         /* set reload register */
+  NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
+  SysTick->VAL   = 0UL;                                             /* Load the SysTick Counter Value */
+  SysTick->CTRL  = SysTick_CTRL_CLKSOURCE_Msk |
+                   SysTick_CTRL_TICKINT_Msk   |
+                   SysTick_CTRL_ENABLE_Msk;                         /* Enable SysTick IRQ and SysTick Timer */
+  return (0UL);                                                     /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM0_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */

meta-st/meta-st-stm32mp-addons/mx/stm32mp157d-vrpmdv-mon-mx/Drivers/CMSIS/Include/core_cm1.h

@@ -0,0 +1,979 @@
+/**************************************************************************//**
+ * @file     core_cm1.h
+ * @brief    CMSIS Cortex-M1 Core Peripheral Access Layer Header File
+ * @version  V1.0.1
+ * @date     12. November 2018
+ ******************************************************************************/
+/*
+ * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#if   defined ( __ICCARM__ )
+  #pragma system_include         /* treat file as system include file for MISRA check */
+#elif defined (__clang__)
+  #pragma clang system_header   /* treat file as system include file */
+#endif
+
+#ifndef __CORE_CM1_H_GENERIC
+#define __CORE_CM1_H_GENERIC
+
+#include <stdint.h>
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/**
+  \page CMSIS_MISRA_Exceptions  MISRA-C:2004 Compliance Exceptions
+  CMSIS violates the following MISRA-C:2004 rules:
+
+   \li Required Rule 8.5, object/function definition in header file.<br>
+     Function definitions in header files are used to allow 'inlining'.
+
+   \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+     Unions are used for effective representation of core registers.
+
+   \li Advisory Rule 19.7, Function-like macro defined.<br>
+     Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ *                 CMSIS definitions
+ ******************************************************************************/
+/**
+  \ingroup Cortex_M1
+  @{
+ */
+
+#include "cmsis_version.h"
+ 
+/*  CMSIS CM1 definitions */
+#define __CM1_CMSIS_VERSION_MAIN  (__CM_CMSIS_VERSION_MAIN)              /*!< \deprecated [31:16] CMSIS HAL main version */
+#define __CM1_CMSIS_VERSION_SUB   (__CM_CMSIS_VERSION_SUB)               /*!< \deprecated [15:0]  CMSIS HAL sub version */
+#define __CM1_CMSIS_VERSION       ((__CM1_CMSIS_VERSION_MAIN << 16U) | \
+                                    __CM1_CMSIS_VERSION_SUB           )  /*!< \deprecated CMSIS HAL version number */
+
+#define __CORTEX_M                (1U)                                   /*!< Cortex-M Core */
+
+/** __FPU_USED indicates whether an FPU is used or not.
+    This core does not support an FPU at all
+*/
+#define __FPU_USED       0U
+
+#if defined ( __CC_ARM )
+  #if defined __TARGET_FPU_VFP
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+  #if defined __ARM_FP
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __GNUC__ )
+  #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __ICCARM__ )
+  #if defined __ARMVFP__
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __TI_ARM__ )
+  #if defined __TI_VFP_SUPPORT__
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __TASKING__ )
+  #if defined __FPU_VFP__
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __CSMC__ )
+  #if ( __CSMC__ & 0x400U)
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#endif
+
+#include "cmsis_compiler.h"               /* CMSIS compiler specific defines */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM1_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM1_H_DEPENDANT
+#define __CORE_CM1_H_DEPENDANT
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+  #ifndef __CM1_REV
+    #define __CM1_REV               0x0100U
+    #warning "__CM1_REV not defined in device header file; using default!"
+  #endif
+
+  #ifndef __NVIC_PRIO_BITS
+    #define __NVIC_PRIO_BITS          2U
+    #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+  #endif
+
+  #ifndef __Vendor_SysTickConfig
+    #define __Vendor_SysTickConfig    0U
+    #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+  #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+    \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+    <strong>IO Type Qualifiers</strong> are used
+    \li to specify the access to peripheral variables.
+    \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+  #define   __I     volatile             /*!< Defines 'read only' permissions */
+#else
+  #define   __I     volatile const       /*!< Defines 'read only' permissions */
+#endif
+#define     __O     volatile             /*!< Defines 'write only' permissions */
+#define     __IO    volatile             /*!< Defines 'read / write' permissions */
+
+/* following defines should be used for structure members */
+#define     __IM     volatile const      /*! Defines 'read only' structure member permissions */
+#define     __OM     volatile            /*! Defines 'write only' structure member permissions */
+#define     __IOM    volatile            /*! Defines 'read / write' structure member permissions */
+
+/*@} end of group Cortex_M1 */
+
+
+
+/*******************************************************************************
+ *                 Register Abstraction
+  Core Register contain:
+  - Core Register
+  - Core NVIC Register
+  - Core SCB Register
+  - Core SysTick Register
+ ******************************************************************************/
+/**
+  \defgroup CMSIS_core_register Defines and Type Definitions
+  \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_CORE  Status and Control Registers
+  \brief      Core Register type definitions.
+  @{
+ */
+
+/**
+  \brief  Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t _reserved0:28;              /*!< bit:  0..27  Reserved */
+    uint32_t V:1;                        /*!< bit:     28  Overflow condition code flag */
+    uint32_t C:1;                        /*!< bit:     29  Carry condition code flag */
+    uint32_t Z:1;                        /*!< bit:     30  Zero condition code flag */
+    uint32_t N:1;                        /*!< bit:     31  Negative condition code flag */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} APSR_Type;
+
+/* APSR Register Definitions */
+#define APSR_N_Pos                         31U                                            /*!< APSR: N Position */
+#define APSR_N_Msk                         (1UL << APSR_N_Pos)                            /*!< APSR: N Mask */
+
+#define APSR_Z_Pos                         30U                                            /*!< APSR: Z Position */
+#define APSR_Z_Msk                         (1UL << APSR_Z_Pos)                            /*!< APSR: Z Mask */
+
+#define APSR_C_Pos                         29U                                            /*!< APSR: C Position */
+#define APSR_C_Msk                         (1UL << APSR_C_Pos)                            /*!< APSR: C Mask */
+
+#define APSR_V_Pos                         28U                                            /*!< APSR: V Position */
+#define APSR_V_Msk                         (1UL << APSR_V_Pos)                            /*!< APSR: V Mask */
+
+
+/**
+  \brief  Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t ISR:9;                      /*!< bit:  0.. 8  Exception number */
+    uint32_t _reserved0:23;              /*!< bit:  9..31  Reserved */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} IPSR_Type;
+
+/* IPSR Register Definitions */
+#define IPSR_ISR_Pos                        0U                                            /*!< IPSR: ISR Position */
+#define IPSR_ISR_Msk                       (0x1FFUL /*<< IPSR_ISR_Pos*/)                  /*!< IPSR: ISR Mask */
+
+
+/**
+  \brief  Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t ISR:9;                      /*!< bit:  0.. 8  Exception number */
+    uint32_t _reserved0:15;              /*!< bit:  9..23  Reserved */
+    uint32_t T:1;                        /*!< bit:     24  Thumb bit        (read 0) */
+    uint32_t _reserved1:3;               /*!< bit: 25..27  Reserved */
+    uint32_t V:1;                        /*!< bit:     28  Overflow condition code flag */
+    uint32_t C:1;                        /*!< bit:     29  Carry condition code flag */
+    uint32_t Z:1;                        /*!< bit:     30  Zero condition code flag */
+    uint32_t N:1;                        /*!< bit:     31  Negative condition code flag */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} xPSR_Type;
+
+/* xPSR Register Definitions */
+#define xPSR_N_Pos                         31U                                            /*!< xPSR: N Position */
+#define xPSR_N_Msk                         (1UL << xPSR_N_Pos)                            /*!< xPSR: N Mask */
+
+#define xPSR_Z_Pos                         30U                                            /*!< xPSR: Z Position */
+#define xPSR_Z_Msk                         (1UL << xPSR_Z_Pos)                            /*!< xPSR: Z Mask */
+
+#define xPSR_C_Pos                         29U                                            /*!< xPSR: C Position */
+#define xPSR_C_Msk                         (1UL << xPSR_C_Pos)                            /*!< xPSR: C Mask */
+
+#define xPSR_V_Pos                         28U                                            /*!< xPSR: V Position */
+#define xPSR_V_Msk                         (1UL << xPSR_V_Pos)                            /*!< xPSR: V Mask */
+
+#define xPSR_T_Pos                         24U                                            /*!< xPSR: T Position */
+#define xPSR_T_Msk                         (1UL << xPSR_T_Pos)                            /*!< xPSR: T Mask */
+
+#define xPSR_ISR_Pos                        0U                                            /*!< xPSR: ISR Position */
+#define xPSR_ISR_Msk                       (0x1FFUL /*<< xPSR_ISR_Pos*/)                  /*!< xPSR: ISR Mask */
+
+
+/**
+  \brief  Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t _reserved0:1;               /*!< bit:      0  Reserved */
+    uint32_t SPSEL:1;                    /*!< bit:      1  Stack to be used */
+    uint32_t _reserved1:30;              /*!< bit:  2..31  Reserved */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} CONTROL_Type;
+
+/* CONTROL Register Definitions */
+#define CONTROL_SPSEL_Pos                   1U                                            /*!< CONTROL: SPSEL Position */
+#define CONTROL_SPSEL_Msk                  (1UL << CONTROL_SPSEL_Pos)                     /*!< CONTROL: SPSEL Mask */
+
+/*@} end of group CMSIS_CORE */
+
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_NVIC  Nested Vectored Interrupt Controller (NVIC)
+  \brief      Type definitions for the NVIC Registers
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+  __IOM uint32_t ISER[1U];               /*!< Offset: 0x000 (R/W)  Interrupt Set Enable Register */
+        uint32_t RESERVED0[31U];
+  __IOM uint32_t ICER[1U];               /*!< Offset: 0x080 (R/W)  Interrupt Clear Enable Register */
+        uint32_t RSERVED1[31U];
+  __IOM uint32_t ISPR[1U];               /*!< Offset: 0x100 (R/W)  Interrupt Set Pending Register */
+        uint32_t RESERVED2[31U];
+  __IOM uint32_t ICPR[1U];               /*!< Offset: 0x180 (R/W)  Interrupt Clear Pending Register */
+        uint32_t RESERVED3[31U];
+        uint32_t RESERVED4[64U];
+  __IOM uint32_t IP[8U];                 /*!< Offset: 0x300 (R/W)  Interrupt Priority Register */
+}  NVIC_Type;
+
+/*@} end of group CMSIS_NVIC */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_SCB     System Control Block (SCB)
+  \brief    Type definitions for the System Control Block Registers
+  @{
+ */
+
+/**
+  \brief  Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+  __IM  uint32_t CPUID;                  /*!< Offset: 0x000 (R/ )  CPUID Base Register */
+  __IOM uint32_t ICSR;                   /*!< Offset: 0x004 (R/W)  Interrupt Control and State Register */
+        uint32_t RESERVED0;
+  __IOM uint32_t AIRCR;                  /*!< Offset: 0x00C (R/W)  Application Interrupt and Reset Control Register */
+  __IOM uint32_t SCR;                    /*!< Offset: 0x010 (R/W)  System Control Register */
+  __IOM uint32_t CCR;                    /*!< Offset: 0x014 (R/W)  Configuration Control Register */
+        uint32_t RESERVED1;
+  __IOM uint32_t SHP[2U];                /*!< Offset: 0x01C (R/W)  System Handlers Priority Registers. [0] is RESERVED */
+  __IOM uint32_t SHCSR;                  /*!< Offset: 0x024 (R/W)  System Handler Control and State Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos          24U                                            /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk          (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos)          /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos              20U                                            /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk              (0xFUL << SCB_CPUID_VARIANT_Pos)               /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos         16U                                            /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk         (0xFUL << SCB_CPUID_ARCHITECTURE_Pos)          /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos                4U                                            /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk               (0xFFFUL << SCB_CPUID_PARTNO_Pos)              /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos              0U                                            /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk             (0xFUL /*<< SCB_CPUID_REVISION_Pos*/)          /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos            31U                                            /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk            (1UL << SCB_ICSR_NMIPENDSET_Pos)               /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos             28U                                            /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk             (1UL << SCB_ICSR_PENDSVSET_Pos)                /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos             27U                                            /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk             (1UL << SCB_ICSR_PENDSVCLR_Pos)                /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos             26U                                            /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk             (1UL << SCB_ICSR_PENDSTSET_Pos)                /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos             25U                                            /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk             (1UL << SCB_ICSR_PENDSTCLR_Pos)                /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos            23U                                            /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk            (1UL << SCB_ICSR_ISRPREEMPT_Pos)               /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos            22U                                            /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk            (1UL << SCB_ICSR_ISRPENDING_Pos)               /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos           12U                                            /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk           (0x1FFUL << SCB_ICSR_VECTPENDING_Pos)          /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos             0U                                            /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk            (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/)       /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos              16U                                            /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk              (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos)            /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos          16U                                            /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk          (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos)        /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos            15U                                            /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk            (1UL << SCB_AIRCR_ENDIANESS_Pos)               /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos           2U                                            /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk          (1UL << SCB_AIRCR_SYSRESETREQ_Pos)             /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos         1U                                            /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk        (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos)           /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos               4U                                            /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk              (1UL << SCB_SCR_SEVONPEND_Pos)                 /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos               2U                                            /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk              (1UL << SCB_SCR_SLEEPDEEP_Pos)                 /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos             1U                                            /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk            (1UL << SCB_SCR_SLEEPONEXIT_Pos)               /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos                9U                                            /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk               (1UL << SCB_CCR_STKALIGN_Pos)                  /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos             3U                                            /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk            (1UL << SCB_CCR_UNALIGN_TRP_Pos)               /*!< SCB CCR: UNALIGN_TRP Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_SVCALLPENDED_Pos         15U                                            /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk         (1UL << SCB_SHCSR_SVCALLPENDED_Pos)            /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
+  \brief    Type definitions for the System Control and ID Register not in the SCB
+  @{
+ */
+
+/**
+  \brief  Structure type to access the System Control and ID Register not in the SCB.
+ */
+typedef struct
+{
+        uint32_t RESERVED0[2U];
+  __IOM uint32_t ACTLR;                  /*!< Offset: 0x008 (R/W)  Auxiliary Control Register */
+} SCnSCB_Type;
+
+/* Auxiliary Control Register Definitions */
+#define SCnSCB_ACTLR_ITCMUAEN_Pos            4U                                        /*!< ACTLR: Instruction TCM Upper Alias Enable Position */
+#define SCnSCB_ACTLR_ITCMUAEN_Msk           (1UL << SCnSCB_ACTLR_ITCMUAEN_Pos)         /*!< ACTLR: Instruction TCM Upper Alias Enable Mask */
+
+#define SCnSCB_ACTLR_ITCMLAEN_Pos            3U                                        /*!< ACTLR: Instruction TCM Lower Alias Enable Position */
+#define SCnSCB_ACTLR_ITCMLAEN_Msk           (1UL << SCnSCB_ACTLR_ITCMLAEN_Pos)         /*!< ACTLR: Instruction TCM Lower Alias Enable Mask */
+
+/*@} end of group CMSIS_SCnotSCB */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_SysTick     System Tick Timer (SysTick)
+  \brief    Type definitions for the System Timer Registers.
+  @{
+ */
+
+/**
+  \brief  Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+  __IOM uint32_t CTRL;                   /*!< Offset: 0x000 (R/W)  SysTick Control and Status Register */
+  __IOM uint32_t LOAD;                   /*!< Offset: 0x004 (R/W)  SysTick Reload Value Register */
+  __IOM uint32_t VAL;                    /*!< Offset: 0x008 (R/W)  SysTick Current Value Register */
+  __IM  uint32_t CALIB;                  /*!< Offset: 0x00C (R/ )  SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos         16U                                            /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk         (1UL << SysTick_CTRL_COUNTFLAG_Pos)            /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos          2U                                            /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk         (1UL << SysTick_CTRL_CLKSOURCE_Pos)            /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos            1U                                            /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk           (1UL << SysTick_CTRL_TICKINT_Pos)              /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos             0U                                            /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk            (1UL /*<< SysTick_CTRL_ENABLE_Pos*/)           /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos             0U                                            /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk            (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/)    /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos             0U                                            /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk            (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/)    /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos            31U                                            /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk            (1UL << SysTick_CALIB_NOREF_Pos)               /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos             30U                                            /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk             (1UL << SysTick_CALIB_SKEW_Pos)                /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos             0U                                            /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk            (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/)    /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_CoreDebug       Core Debug Registers (CoreDebug)
+  \brief    Cortex-M1 Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor.
+            Therefore they are not covered by the Cortex-M1 header file.
+  @{
+ */
+/*@} end of group CMSIS_CoreDebug */
+
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_core_bitfield     Core register bit field macros
+  \brief      Macros for use with bit field definitions (xxx_Pos, xxx_Msk).
+  @{
+ */
+
+/**
+  \brief   Mask and shift a bit field value for use in a register bit range.
+  \param[in] field  Name of the register bit field.
+  \param[in] value  Value of the bit field. This parameter is interpreted as an uint32_t type.
+  \return           Masked and shifted value.
+*/
+#define _VAL2FLD(field, value)    (((uint32_t)(value) << field ## _Pos) & field ## _Msk)
+
+/**
+  \brief     Mask and shift a register value to extract a bit filed value.
+  \param[in] field  Name of the register bit field.
+  \param[in] value  Value of register. This parameter is interpreted as an uint32_t type.
+  \return           Masked and shifted bit field value.
+*/
+#define _FLD2VAL(field, value)    (((uint32_t)(value) & field ## _Msk) >> field ## _Pos)
+
+/*@} end of group CMSIS_core_bitfield */
+
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_core_base     Core Definitions
+  \brief      Definitions for base addresses, unions, and structures.
+  @{
+ */
+
+/* Memory mapping of Core Hardware */
+#define SCS_BASE            (0xE000E000UL)                            /*!< System Control Space Base Address */
+#define SysTick_BASE        (SCS_BASE +  0x0010UL)                    /*!< SysTick Base Address */
+#define NVIC_BASE           (SCS_BASE +  0x0100UL)                    /*!< NVIC Base Address */
+#define SCB_BASE            (SCS_BASE +  0x0D00UL)                    /*!< System Control Block Base Address */
+
+#define SCnSCB              ((SCnSCB_Type    *)     SCS_BASE      )   /*!< System control Register not in SCB */
+#define SCB                 ((SCB_Type       *)     SCB_BASE      )   /*!< SCB configuration struct */
+#define SysTick             ((SysTick_Type   *)     SysTick_BASE  )   /*!< SysTick configuration struct */
+#define NVIC                ((NVIC_Type      *)     NVIC_BASE     )   /*!< NVIC configuration struct */
+
+
+/*@} */
+
+
+
+/*******************************************************************************
+ *                Hardware Abstraction Layer
+  Core Function Interface contains:
+  - Core NVIC Functions
+  - Core SysTick Functions
+  - Core Register Access Functions
+ ******************************************************************************/
+/**
+  \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ##########################   NVIC functions  #################################### */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+  \brief    Functions that manage interrupts and exceptions via the NVIC.
+  @{
+ */
+
+#ifdef CMSIS_NVIC_VIRTUAL
+  #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE
+    #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h"
+  #endif
+  #include CMSIS_NVIC_VIRTUAL_HEADER_FILE
+#else
+  #define NVIC_SetPriorityGrouping    __NVIC_SetPriorityGrouping
+  #define NVIC_GetPriorityGrouping    __NVIC_GetPriorityGrouping
+  #define NVIC_EnableIRQ              __NVIC_EnableIRQ
+  #define NVIC_GetEnableIRQ           __NVIC_GetEnableIRQ
+  #define NVIC_DisableIRQ             __NVIC_DisableIRQ
+  #define NVIC_GetPendingIRQ          __NVIC_GetPendingIRQ
+  #define NVIC_SetPendingIRQ          __NVIC_SetPendingIRQ
+  #define NVIC_ClearPendingIRQ        __NVIC_ClearPendingIRQ
+/*#define NVIC_GetActive              __NVIC_GetActive             not available for Cortex-M1 */
+  #define NVIC_SetPriority            __NVIC_SetPriority
+  #define NVIC_GetPriority            __NVIC_GetPriority
+  #define NVIC_SystemReset            __NVIC_SystemReset
+#endif /* CMSIS_NVIC_VIRTUAL */
+
+#ifdef CMSIS_VECTAB_VIRTUAL
+  #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE
+    #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h"
+  #endif
+  #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE
+#else
+  #define NVIC_SetVector              __NVIC_SetVector
+  #define NVIC_GetVector              __NVIC_GetVector
+#endif  /* (CMSIS_VECTAB_VIRTUAL) */
+
+#define NVIC_USER_IRQ_OFFSET          16
+
+
+/* The following EXC_RETURN values are saved the LR on exception entry */
+#define EXC_RETURN_HANDLER         (0xFFFFFFF1UL)     /* return to Handler mode, uses MSP after return                               */
+#define EXC_RETURN_THREAD_MSP      (0xFFFFFFF9UL)     /* return to Thread mode, uses MSP after return                                */
+#define EXC_RETURN_THREAD_PSP      (0xFFFFFFFDUL)     /* return to Thread mode, uses PSP after return                                */
+
+
+/* Interrupt Priorities are WORD accessible only under Armv6-M                  */
+/* The following MACROS handle generation of the register offset and byte masks */
+#define _BIT_SHIFT(IRQn)         (  ((((uint32_t)(int32_t)(IRQn))         )      &  0x03UL) * 8UL)
+#define _SHP_IDX(IRQn)           ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >>    2UL)      )
+#define _IP_IDX(IRQn)            (   (((uint32_t)(int32_t)(IRQn))                >>    2UL)      )
+
+#define __NVIC_SetPriorityGrouping(X) (void)(X)
+#define __NVIC_GetPriorityGrouping()  (0U)
+
+/**
+  \brief   Enable Interrupt
+  \details Enables a device specific interrupt in the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    __COMPILER_BARRIER();
+    NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+    __COMPILER_BARRIER();
+  }
+}
+
+
+/**
+  \brief   Get Interrupt Enable status
+  \details Returns a device specific interrupt enable status from the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt is not enabled.
+  \return             1  Interrupt is enabled.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->ISER[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Disable Interrupt
+  \details Disables a device specific interrupt in the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+    __DSB();
+    __ISB();
+  }
+}
+
+
+/**
+  \brief   Get Pending Interrupt
+  \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt status is not pending.
+  \return             1  Interrupt status is pending.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Set Pending Interrupt
+  \details Sets the pending bit of a device specific interrupt in the NVIC pending register.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Clear Pending Interrupt
+  \details Clears the pending bit of a device specific interrupt in the NVIC pending register.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Set Interrupt Priority
+  \details Sets the priority of a device specific interrupt or a processor exception.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]      IRQn  Interrupt number.
+  \param [in]  priority  Priority to set.
+  \note    The priority cannot be set for every processor exception.
+ */
+__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->IP[_IP_IDX(IRQn)]  = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)]  & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+       (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
+  }
+  else
+  {
+    SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+       (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
+  }
+}
+
+
+/**
+  \brief   Get Interrupt Priority
+  \details Reads the priority of a device specific interrupt or a processor exception.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]   IRQn  Interrupt number.
+  \return             Interrupt Priority.
+                      Value is aligned automatically to the implemented priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
+  }
+  else
+  {
+    return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
+  }
+}
+
+
+/**
+  \brief   Encode Priority
+  \details Encodes the priority for an interrupt with the given priority group,
+           preemptive priority value, and subpriority value.
+           In case of a conflict between priority grouping and available
+           priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+  \param [in]     PriorityGroup  Used priority group.
+  \param [in]   PreemptPriority  Preemptive priority value (starting from 0).
+  \param [in]       SubPriority  Subpriority value (starting from 0).
+  \return                        Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
+ */
+__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+  uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL);   /* only values 0..7 are used          */
+  uint32_t PreemptPriorityBits;
+  uint32_t SubPriorityBits;
+
+  PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+  SubPriorityBits     = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+  return (
+           ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) |
+           ((SubPriority     & (uint32_t)((1UL << (SubPriorityBits    )) - 1UL)))
+         );
+}
+
+
+/**
+  \brief   Decode Priority
+  \details Decodes an interrupt priority value with a given priority group to
+           preemptive priority value and subpriority value.
+           In case of a conflict between priority grouping and available
+           priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set.
+  \param [in]         Priority   Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
+  \param [in]     PriorityGroup  Used priority group.
+  \param [out] pPreemptPriority  Preemptive priority value (starting from 0).
+  \param [out]     pSubPriority  Subpriority value (starting from 0).
+ */
+__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority)
+{
+  uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL);   /* only values 0..7 are used          */
+  uint32_t PreemptPriorityBits;
+  uint32_t SubPriorityBits;
+
+  PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+  SubPriorityBits     = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+  *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL);
+  *pSubPriority     = (Priority                   ) & (uint32_t)((1UL << (SubPriorityBits    )) - 1UL);
+}
+
+
+
+/**
+  \brief   Set Interrupt Vector
+  \details Sets an interrupt vector in SRAM based interrupt vector table.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+           Address 0 must be mapped to SRAM.
+  \param [in]   IRQn      Interrupt number
+  \param [in]   vector    Address of interrupt handler function
+ */
+__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector)
+{
+  uint32_t *vectors = (uint32_t *)0x0U;
+  vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector;
+  /* ARM Application Note 321 states that the M1 does not require the architectural barrier */
+}
+
+
+/**
+  \brief   Get Interrupt Vector
+  \details Reads an interrupt vector from interrupt vector table.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]   IRQn      Interrupt number.
+  \return                 Address of interrupt handler function
+ */
+__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn)
+{
+  uint32_t *vectors = (uint32_t *)0x0U;
+  return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET];
+}
+
+
+/**
+  \brief   System Reset
+  \details Initiates a system reset request to reset the MCU.
+ */
+__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void)
+{
+  __DSB();                                                          /* Ensure all outstanding memory accesses included
+                                                                       buffered write are completed before reset */
+  SCB->AIRCR  = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+                 SCB_AIRCR_SYSRESETREQ_Msk);
+  __DSB();                                                          /* Ensure completion of memory access */
+
+  for(;;)                                                           /* wait until reset */
+  {
+    __NOP();
+  }
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+/* ##########################  FPU functions  #################################### */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_FpuFunctions FPU Functions
+  \brief    Function that provides FPU type.
+  @{
+ */
+
+/**
+  \brief   get FPU type
+  \details returns the FPU type
+  \returns
+   - \b  0: No FPU
+   - \b  1: Single precision FPU
+   - \b  2: Double + Single precision FPU
+ */
+__STATIC_INLINE uint32_t SCB_GetFPUType(void)
+{
+    return 0U;           /* No FPU */
+}
+
+
+/*@} end of CMSIS_Core_FpuFunctions */
+
+
+
+/* ##################################    SysTick function  ############################################ */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+  \brief    Functions that configure the System.
+  @{
+ */
+
+#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U)
+
+/**
+  \brief   System Tick Configuration
+  \details Initializes the System Timer and its interrupt, and starts the System Tick Timer.
+           Counter is in free running mode to generate periodic interrupts.
+  \param [in]  ticks  Number of ticks between two interrupts.
+  \return          0  Function succeeded.
+  \return          1  Function failed.
+  \note    When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+           function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+           must contain a vendor-specific implementation of this function.
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+  if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk)
+  {
+    return (1UL);                                                   /* Reload value impossible */
+  }
+
+  SysTick->LOAD  = (uint32_t)(ticks - 1UL);                         /* set reload register */
+  NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
+  SysTick->VAL   = 0UL;                                             /* Load the SysTick Counter Value */
+  SysTick->CTRL  = SysTick_CTRL_CLKSOURCE_Msk |
+                   SysTick_CTRL_TICKINT_Msk   |
+                   SysTick_CTRL_ENABLE_Msk;                         /* Enable SysTick IRQ and SysTick Timer */
+  return (0UL);                                                     /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM1_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */

meta-st/meta-st-stm32mp-addons/mx/stm32mp157d-vrpmdv-mon-mx/Drivers/CMSIS/Include/mpu_armv7.h

@@ -0,0 +1,272 @@
+/******************************************************************************
+ * @file     mpu_armv7.h
+ * @brief    CMSIS MPU API for Armv7-M MPU
+ * @version  V5.1.0
+ * @date     08. March 2019
+ ******************************************************************************/
+/*
+ * Copyright (c) 2017-2019 Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+ 
+#if   defined ( __ICCARM__ )
+  #pragma system_include         /* treat file as system include file for MISRA check */
+#elif defined (__clang__)
+  #pragma clang system_header    /* treat file as system include file */
+#endif
+ 
+#ifndef ARM_MPU_ARMV7_H
+#define ARM_MPU_ARMV7_H
+
+#define ARM_MPU_REGION_SIZE_32B      ((uint8_t)0x04U) ///!< MPU Region Size 32 Bytes
+#define ARM_MPU_REGION_SIZE_64B      ((uint8_t)0x05U) ///!< MPU Region Size 64 Bytes
+#define ARM_MPU_REGION_SIZE_128B     ((uint8_t)0x06U) ///!< MPU Region Size 128 Bytes
+#define ARM_MPU_REGION_SIZE_256B     ((uint8_t)0x07U) ///!< MPU Region Size 256 Bytes
+#define ARM_MPU_REGION_SIZE_512B     ((uint8_t)0x08U) ///!< MPU Region Size 512 Bytes
+#define ARM_MPU_REGION_SIZE_1KB      ((uint8_t)0x09U) ///!< MPU Region Size 1 KByte
+#define ARM_MPU_REGION_SIZE_2KB      ((uint8_t)0x0AU) ///!< MPU Region Size 2 KBytes
+#define ARM_MPU_REGION_SIZE_4KB      ((uint8_t)0x0BU) ///!< MPU Region Size 4 KBytes
+#define ARM_MPU_REGION_SIZE_8KB      ((uint8_t)0x0CU) ///!< MPU Region Size 8 KBytes
+#define ARM_MPU_REGION_SIZE_16KB     ((uint8_t)0x0DU) ///!< MPU Region Size 16 KBytes
+#define ARM_MPU_REGION_SIZE_32KB     ((uint8_t)0x0EU) ///!< MPU Region Size 32 KBytes
+#define ARM_MPU_REGION_SIZE_64KB     ((uint8_t)0x0FU) ///!< MPU Region Size 64 KBytes
+#define ARM_MPU_REGION_SIZE_128KB    ((uint8_t)0x10U) ///!< MPU Region Size 128 KBytes
+#define ARM_MPU_REGION_SIZE_256KB    ((uint8_t)0x11U) ///!< MPU Region Size 256 KBytes
+#define ARM_MPU_REGION_SIZE_512KB    ((uint8_t)0x12U) ///!< MPU Region Size 512 KBytes
+#define ARM_MPU_REGION_SIZE_1MB      ((uint8_t)0x13U) ///!< MPU Region Size 1 MByte
+#define ARM_MPU_REGION_SIZE_2MB      ((uint8_t)0x14U) ///!< MPU Region Size 2 MBytes
+#define ARM_MPU_REGION_SIZE_4MB      ((uint8_t)0x15U) ///!< MPU Region Size 4 MBytes
+#define ARM_MPU_REGION_SIZE_8MB      ((uint8_t)0x16U) ///!< MPU Region Size 8 MBytes
+#define ARM_MPU_REGION_SIZE_16MB     ((uint8_t)0x17U) ///!< MPU Region Size 16 MBytes
+#define ARM_MPU_REGION_SIZE_32MB     ((uint8_t)0x18U) ///!< MPU Region Size 32 MBytes
+#define ARM_MPU_REGION_SIZE_64MB     ((uint8_t)0x19U) ///!< MPU Region Size 64 MBytes
+#define ARM_MPU_REGION_SIZE_128MB    ((uint8_t)0x1AU) ///!< MPU Region Size 128 MBytes
+#define ARM_MPU_REGION_SIZE_256MB    ((uint8_t)0x1BU) ///!< MPU Region Size 256 MBytes
+#define ARM_MPU_REGION_SIZE_512MB    ((uint8_t)0x1CU) ///!< MPU Region Size 512 MBytes
+#define ARM_MPU_REGION_SIZE_1GB      ((uint8_t)0x1DU) ///!< MPU Region Size 1 GByte
+#define ARM_MPU_REGION_SIZE_2GB      ((uint8_t)0x1EU) ///!< MPU Region Size 2 GBytes
+#define ARM_MPU_REGION_SIZE_4GB      ((uint8_t)0x1FU) ///!< MPU Region Size 4 GBytes
+
+#define ARM_MPU_AP_NONE 0U ///!< MPU Access Permission no access
+#define ARM_MPU_AP_PRIV 1U ///!< MPU Access Permission privileged access only
+#define ARM_MPU_AP_URO  2U ///!< MPU Access Permission unprivileged access read-only
+#define ARM_MPU_AP_FULL 3U ///!< MPU Access Permission full access
+#define ARM_MPU_AP_PRO  5U ///!< MPU Access Permission privileged access read-only
+#define ARM_MPU_AP_RO   6U ///!< MPU Access Permission read-only access
+
+/** MPU Region Base Address Register Value
+*
+* \param Region The region to be configured, number 0 to 15.
+* \param BaseAddress The base address for the region.
+*/
+#define ARM_MPU_RBAR(Region, BaseAddress) \
+  (((BaseAddress) & MPU_RBAR_ADDR_Msk) |  \
+   ((Region) & MPU_RBAR_REGION_Msk)    |  \
+   (MPU_RBAR_VALID_Msk))
+
+/**
+* MPU Memory Access Attributes
+* 
+* \param TypeExtField      Type extension field, allows you to configure memory access type, for example strongly ordered, peripheral.
+* \param IsShareable       Region is shareable between multiple bus masters.
+* \param IsCacheable       Region is cacheable, i.e. its value may be kept in cache.
+* \param IsBufferable      Region is bufferable, i.e. using write-back caching. Cacheable but non-bufferable regions use write-through policy.
+*/  
+#define ARM_MPU_ACCESS_(TypeExtField, IsShareable, IsCacheable, IsBufferable)   \
+  ((((TypeExtField) << MPU_RASR_TEX_Pos) & MPU_RASR_TEX_Msk)                  | \
+   (((IsShareable)  << MPU_RASR_S_Pos)   & MPU_RASR_S_Msk)                    | \
+   (((IsCacheable)  << MPU_RASR_C_Pos)   & MPU_RASR_C_Msk)                    | \
+   (((IsBufferable) << MPU_RASR_B_Pos)   & MPU_RASR_B_Msk))
+
+/**
+* MPU Region Attribute and Size Register Value
+* 
+* \param DisableExec       Instruction access disable bit, 1= disable instruction fetches.
+* \param AccessPermission  Data access permissions, allows you to configure read/write access for User and Privileged mode.
+* \param AccessAttributes  Memory access attribution, see \ref ARM_MPU_ACCESS_.
+* \param SubRegionDisable  Sub-region disable field.
+* \param Size              Region size of the region to be configured, for example 4K, 8K.
+*/
+#define ARM_MPU_RASR_EX(DisableExec, AccessPermission, AccessAttributes, SubRegionDisable, Size)    \
+  ((((DisableExec)      << MPU_RASR_XN_Pos)   & MPU_RASR_XN_Msk)                                  | \
+   (((AccessPermission) << MPU_RASR_AP_Pos)   & MPU_RASR_AP_Msk)                                  | \
+   (((AccessAttributes) & (MPU_RASR_TEX_Msk | MPU_RASR_S_Msk | MPU_RASR_C_Msk | MPU_RASR_B_Msk))) | \
+   (((SubRegionDisable) << MPU_RASR_SRD_Pos)  & MPU_RASR_SRD_Msk)                                 | \
+   (((Size)             << MPU_RASR_SIZE_Pos) & MPU_RASR_SIZE_Msk)                                | \
+   (((MPU_RASR_ENABLE_Msk))))
+
+/**
+* MPU Region Attribute and Size Register Value
+* 
+* \param DisableExec       Instruction access disable bit, 1= disable instruction fetches.
+* \param AccessPermission  Data access permissions, allows you to configure read/write access for User and Privileged mode.
+* \param TypeExtField      Type extension field, allows you to configure memory access type, for example strongly ordered, peripheral.
+* \param IsShareable       Region is shareable between multiple bus masters.
+* \param IsCacheable       Region is cacheable, i.e. its value may be kept in cache.
+* \param IsBufferable      Region is bufferable, i.e. using write-back caching. Cacheable but non-bufferable regions use write-through policy.
+* \param SubRegionDisable  Sub-region disable field.
+* \param Size              Region size of the region to be configured, for example 4K, 8K.
+*/                         
+#define ARM_MPU_RASR(DisableExec, AccessPermission, TypeExtField, IsShareable, IsCacheable, IsBufferable, SubRegionDisable, Size) \
+  ARM_MPU_RASR_EX(DisableExec, AccessPermission, ARM_MPU_ACCESS_(TypeExtField, IsShareable, IsCacheable, IsBufferable), SubRegionDisable, Size)
+
+/**
+* MPU Memory Access Attribute for strongly ordered memory.
+*  - TEX: 000b
+*  - Shareable
+*  - Non-cacheable
+*  - Non-bufferable
+*/ 
+#define ARM_MPU_ACCESS_ORDERED ARM_MPU_ACCESS_(0U, 1U, 0U, 0U)
+
+/**
+* MPU Memory Access Attribute for device memory.
+*  - TEX: 000b (if shareable) or 010b (if non-shareable)
+*  - Shareable or non-shareable
+*  - Non-cacheable
+*  - Bufferable (if shareable) or non-bufferable (if non-shareable)
+*
+* \param IsShareable Configures the device memory as shareable or non-shareable.
+*/ 
+#define ARM_MPU_ACCESS_DEVICE(IsShareable) ((IsShareable) ? ARM_MPU_ACCESS_(0U, 1U, 0U, 1U) : ARM_MPU_ACCESS_(2U, 0U, 0U, 0U))
+
+/**
+* MPU Memory Access Attribute for normal memory.
+*  - TEX: 1BBb (reflecting outer cacheability rules)
+*  - Shareable or non-shareable
+*  - Cacheable or non-cacheable (reflecting inner cacheability rules)
+*  - Bufferable or non-bufferable (reflecting inner cacheability rules)
+*
+* \param OuterCp Configures the outer cache policy.
+* \param InnerCp Configures the inner cache policy.
+* \param IsShareable Configures the memory as shareable or non-shareable.
+*/ 
+#define ARM_MPU_ACCESS_NORMAL(OuterCp, InnerCp, IsShareable) ARM_MPU_ACCESS_((4U | (OuterCp)), IsShareable, ((InnerCp) & 2U), ((InnerCp) & 1U))
+
+/**
+* MPU Memory Access Attribute non-cacheable policy.
+*/
+#define ARM_MPU_CACHEP_NOCACHE 0U
+
+/**
+* MPU Memory Access Attribute write-back, write and read allocate policy.
+*/
+#define ARM_MPU_CACHEP_WB_WRA 1U
+
+/**
+* MPU Memory Access Attribute write-through, no write allocate policy.
+*/
+#define ARM_MPU_CACHEP_WT_NWA 2U
+
+/**
+* MPU Memory Access Attribute write-back, no write allocate policy.
+*/
+#define ARM_MPU_CACHEP_WB_NWA 3U
+
+
+/**
+* Struct for a single MPU Region
+*/
+typedef struct {
+  uint32_t RBAR; //!< The region base address register value (RBAR)
+  uint32_t RASR; //!< The region attribute and size register value (RASR) \ref MPU_RASR
+} ARM_MPU_Region_t;
+    
+/** Enable the MPU.
+* \param MPU_Control Default access permissions for unconfigured regions.
+*/
+__STATIC_INLINE void ARM_MPU_Enable(uint32_t MPU_Control)
+{
+  MPU->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk;
+#ifdef SCB_SHCSR_MEMFAULTENA_Msk
+  SCB->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk;
+#endif
+  __DSB();
+  __ISB();
+}
+
+/** Disable the MPU.
+*/
+__STATIC_INLINE void ARM_MPU_Disable(void)
+{
+  __DMB();
+#ifdef SCB_SHCSR_MEMFAULTENA_Msk
+  SCB->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk;
+#endif
+  MPU->CTRL  &= ~MPU_CTRL_ENABLE_Msk;
+}
+
+/** Clear and disable the given MPU region.
+* \param rnr Region number to be cleared.
+*/
+__STATIC_INLINE void ARM_MPU_ClrRegion(uint32_t rnr)
+{
+  MPU->RNR = rnr;
+  MPU->RASR = 0U;
+}
+
+/** Configure an MPU region.
+* \param rbar Value for RBAR register.
+* \param rsar Value for RSAR register.
+*/   
+__STATIC_INLINE void ARM_MPU_SetRegion(uint32_t rbar, uint32_t rasr)
+{
+  MPU->RBAR = rbar;
+  MPU->RASR = rasr;
+}
+
+/** Configure the given MPU region.
+* \param rnr Region number to be configured.
+* \param rbar Value for RBAR register.
+* \param rsar Value for RSAR register.
+*/   
+__STATIC_INLINE void ARM_MPU_SetRegionEx(uint32_t rnr, uint32_t rbar, uint32_t rasr)
+{
+  MPU->RNR = rnr;
+  MPU->RBAR = rbar;
+  MPU->RASR = rasr;
+}
+
+/** Memcopy with strictly ordered memory access, e.g. for register targets.
+* \param dst Destination data is copied to.
+* \param src Source data is copied from.
+* \param len Amount of data words to be copied.
+*/
+__STATIC_INLINE void ARM_MPU_OrderedMemcpy(volatile uint32_t* dst, const uint32_t* __RESTRICT src, uint32_t len)
+{
+  uint32_t i;
+  for (i = 0U; i < len; ++i) 
+  {
+    dst[i] = src[i];
+  }
+}
+
+/** Load the given number of MPU regions from a table.
+* \param table Pointer to the MPU configuration table.
+* \param cnt Amount of regions to be configured.
+*/
+__STATIC_INLINE void ARM_MPU_Load(ARM_MPU_Region_t const* table, uint32_t cnt) 
+{
+  const uint32_t rowWordSize = sizeof(ARM_MPU_Region_t)/4U;
+  while (cnt > MPU_TYPE_RALIASES) {
+    ARM_MPU_OrderedMemcpy(&(MPU->RBAR), &(table->RBAR), MPU_TYPE_RALIASES*rowWordSize);
+    table += MPU_TYPE_RALIASES;
+    cnt -= MPU_TYPE_RALIASES;
+  }
+  ARM_MPU_OrderedMemcpy(&(MPU->RBAR), &(table->RBAR), cnt*rowWordSize);
+}
+
+#endif

meta-st/meta-st-stm32mp-addons/mx/stm32mp157d-vrpmdv-mon-mx/Drivers/CMSIS/Include/mpu_armv8.h

@@ -0,0 +1,346 @@
+/******************************************************************************
+ * @file     mpu_armv8.h
+ * @brief    CMSIS MPU API for Armv8-M and Armv8.1-M MPU
+ * @version  V5.1.0
+ * @date     08. March 2019
+ ******************************************************************************/
+/*
+ * Copyright (c) 2017-2019 Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#if   defined ( __ICCARM__ )
+  #pragma system_include         /* treat file as system include file for MISRA check */
+#elif defined (__clang__)
+  #pragma clang system_header    /* treat file as system include file */
+#endif
+
+#ifndef ARM_MPU_ARMV8_H
+#define ARM_MPU_ARMV8_H
+
+/** \brief Attribute for device memory (outer only) */
+#define ARM_MPU_ATTR_DEVICE                           ( 0U )
+
+/** \brief Attribute for non-cacheable, normal memory */
+#define ARM_MPU_ATTR_NON_CACHEABLE                    ( 4U )
+
+/** \brief Attribute for normal memory (outer and inner)
+* \param NT Non-Transient: Set to 1 for non-transient data.
+* \param WB Write-Back: Set to 1 to use write-back update policy.
+* \param RA Read Allocation: Set to 1 to use cache allocation on read miss.
+* \param WA Write Allocation: Set to 1 to use cache allocation on write miss.
+*/
+#define ARM_MPU_ATTR_MEMORY_(NT, WB, RA, WA) \
+  (((NT & 1U) << 3U) | ((WB & 1U) << 2U) | ((RA & 1U) << 1U) | (WA & 1U))
+
+/** \brief Device memory type non Gathering, non Re-ordering, non Early Write Acknowledgement */
+#define ARM_MPU_ATTR_DEVICE_nGnRnE (0U)
+
+/** \brief Device memory type non Gathering, non Re-ordering, Early Write Acknowledgement */
+#define ARM_MPU_ATTR_DEVICE_nGnRE  (1U)
+
+/** \brief Device memory type non Gathering, Re-ordering, Early Write Acknowledgement */
+#define ARM_MPU_ATTR_DEVICE_nGRE   (2U)
+
+/** \brief Device memory type Gathering, Re-ordering, Early Write Acknowledgement */
+#define ARM_MPU_ATTR_DEVICE_GRE    (3U)
+
+/** \brief Memory Attribute
+* \param O Outer memory attributes
+* \param I O == ARM_MPU_ATTR_DEVICE: Device memory attributes, else: Inner memory attributes
+*/
+#define ARM_MPU_ATTR(O, I) (((O & 0xFU) << 4U) | (((O & 0xFU) != 0U) ? (I & 0xFU) : ((I & 0x3U) << 2U)))
+
+/** \brief Normal memory non-shareable  */
+#define ARM_MPU_SH_NON   (0U)
+
+/** \brief Normal memory outer shareable  */
+#define ARM_MPU_SH_OUTER (2U)
+
+/** \brief Normal memory inner shareable  */
+#define ARM_MPU_SH_INNER (3U)
+
+/** \brief Memory access permissions
+* \param RO Read-Only: Set to 1 for read-only memory.
+* \param NP Non-Privileged: Set to 1 for non-privileged memory.
+*/
+#define ARM_MPU_AP_(RO, NP) (((RO & 1U) << 1U) | (NP & 1U))
+
+/** \brief Region Base Address Register value
+* \param BASE The base address bits [31:5] of a memory region. The value is zero extended. Effective address gets 32 byte aligned.
+* \param SH Defines the Shareability domain for this memory region.
+* \param RO Read-Only: Set to 1 for a read-only memory region.
+* \param NP Non-Privileged: Set to 1 for a non-privileged memory region.
+* \oaram XN eXecute Never: Set to 1 for a non-executable memory region.
+*/
+#define ARM_MPU_RBAR(BASE, SH, RO, NP, XN) \
+  ((BASE & MPU_RBAR_BASE_Msk) | \
+  ((SH << MPU_RBAR_SH_Pos) & MPU_RBAR_SH_Msk) | \
+  ((ARM_MPU_AP_(RO, NP) << MPU_RBAR_AP_Pos) & MPU_RBAR_AP_Msk) | \
+  ((XN << MPU_RBAR_XN_Pos) & MPU_RBAR_XN_Msk))
+
+/** \brief Region Limit Address Register value
+* \param LIMIT The limit address bits [31:5] for this memory region. The value is one extended.
+* \param IDX The attribute index to be associated with this memory region.
+*/
+#define ARM_MPU_RLAR(LIMIT, IDX) \
+  ((LIMIT & MPU_RLAR_LIMIT_Msk) | \
+  ((IDX << MPU_RLAR_AttrIndx_Pos) & MPU_RLAR_AttrIndx_Msk) | \
+  (MPU_RLAR_EN_Msk))
+
+#if defined(MPU_RLAR_PXN_Pos)
+  
+/** \brief Region Limit Address Register with PXN value
+* \param LIMIT The limit address bits [31:5] for this memory region. The value is one extended.
+* \param PXN Privileged execute never. Defines whether code can be executed from this privileged region.
+* \param IDX The attribute index to be associated with this memory region.
+*/
+#define ARM_MPU_RLAR_PXN(LIMIT, PXN, IDX) \
+  ((LIMIT & MPU_RLAR_LIMIT_Msk) | \
+  ((PXN << MPU_RLAR_PXN_Pos) & MPU_RLAR_PXN_Msk) | \
+  ((IDX << MPU_RLAR_AttrIndx_Pos) & MPU_RLAR_AttrIndx_Msk) | \
+  (MPU_RLAR_EN_Msk))
+  
+#endif
+
+/**
+* Struct for a single MPU Region
+*/
+typedef struct {
+  uint32_t RBAR;                   /*!< Region Base Address Register value */
+  uint32_t RLAR;                   /*!< Region Limit Address Register value */
+} ARM_MPU_Region_t;
+    
+/** Enable the MPU.
+* \param MPU_Control Default access permissions for unconfigured regions.
+*/
+__STATIC_INLINE void ARM_MPU_Enable(uint32_t MPU_Control)
+{
+  MPU->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk;
+#ifdef SCB_SHCSR_MEMFAULTENA_Msk
+  SCB->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk;
+#endif
+  __DSB();
+  __ISB();
+}
+
+/** Disable the MPU.
+*/
+__STATIC_INLINE void ARM_MPU_Disable(void)
+{
+  __DMB();
+#ifdef SCB_SHCSR_MEMFAULTENA_Msk
+  SCB->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk;
+#endif
+  MPU->CTRL  &= ~MPU_CTRL_ENABLE_Msk;
+}
+
+#ifdef MPU_NS
+/** Enable the Non-secure MPU.
+* \param MPU_Control Default access permissions for unconfigured regions.
+*/
+__STATIC_INLINE void ARM_MPU_Enable_NS(uint32_t MPU_Control)
+{
+  MPU_NS->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk;
+#ifdef SCB_SHCSR_MEMFAULTENA_Msk
+  SCB_NS->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk;
+#endif
+  __DSB();
+  __ISB();
+}
+
+/** Disable the Non-secure MPU.
+*/
+__STATIC_INLINE void ARM_MPU_Disable_NS(void)
+{
+  __DMB();
+#ifdef SCB_SHCSR_MEMFAULTENA_Msk
+  SCB_NS->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk;
+#endif
+  MPU_NS->CTRL  &= ~MPU_CTRL_ENABLE_Msk;
+}
+#endif
+
+/** Set the memory attribute encoding to the given MPU.
+* \param mpu Pointer to the MPU to be configured.
+* \param idx The attribute index to be set [0-7]
+* \param attr The attribute value to be set.
+*/
+__STATIC_INLINE void ARM_MPU_SetMemAttrEx(MPU_Type* mpu, uint8_t idx, uint8_t attr)
+{
+  const uint8_t reg = idx / 4U;
+  const uint32_t pos = ((idx % 4U) * 8U);
+  const uint32_t mask = 0xFFU << pos;
+  
+  if (reg >= (sizeof(mpu->MAIR) / sizeof(mpu->MAIR[0]))) {
+    return; // invalid index
+  }
+  
+  mpu->MAIR[reg] = ((mpu->MAIR[reg] & ~mask) | ((attr << pos) & mask));
+}
+
+/** Set the memory attribute encoding.
+* \param idx The attribute index to be set [0-7]
+* \param attr The attribute value to be set.
+*/
+__STATIC_INLINE void ARM_MPU_SetMemAttr(uint8_t idx, uint8_t attr)
+{
+  ARM_MPU_SetMemAttrEx(MPU, idx, attr);
+}
+
+#ifdef MPU_NS
+/** Set the memory attribute encoding to the Non-secure MPU.
+* \param idx The attribute index to be set [0-7]
+* \param attr The attribute value to be set.
+*/
+__STATIC_INLINE void ARM_MPU_SetMemAttr_NS(uint8_t idx, uint8_t attr)
+{
+  ARM_MPU_SetMemAttrEx(MPU_NS, idx, attr);
+}
+#endif
+
+/** Clear and disable the given MPU region of the given MPU.
+* \param mpu Pointer to MPU to be used.
+* \param rnr Region number to be cleared.
+*/
+__STATIC_INLINE void ARM_MPU_ClrRegionEx(MPU_Type* mpu, uint32_t rnr)
+{
+  mpu->RNR = rnr;
+  mpu->RLAR = 0U;
+}
+
+/** Clear and disable the given MPU region.
+* \param rnr Region number to be cleared.
+*/
+__STATIC_INLINE void ARM_MPU_ClrRegion(uint32_t rnr)
+{
+  ARM_MPU_ClrRegionEx(MPU, rnr);
+}
+
+#ifdef MPU_NS
+/** Clear and disable the given Non-secure MPU region.
+* \param rnr Region number to be cleared.
+*/
+__STATIC_INLINE void ARM_MPU_ClrRegion_NS(uint32_t rnr)
+{  
+  ARM_MPU_ClrRegionEx(MPU_NS, rnr);
+}
+#endif
+
+/** Configure the given MPU region of the given MPU.
+* \param mpu Pointer to MPU to be used.
+* \param rnr Region number to be configured.
+* \param rbar Value for RBAR register.
+* \param rlar Value for RLAR register.
+*/   
+__STATIC_INLINE void ARM_MPU_SetRegionEx(MPU_Type* mpu, uint32_t rnr, uint32_t rbar, uint32_t rlar)
+{
+  mpu->RNR = rnr;
+  mpu->RBAR = rbar;
+  mpu->RLAR = rlar;
+}
+
+/** Configure the given MPU region.
+* \param rnr Region number to be configured.
+* \param rbar Value for RBAR register.
+* \param rlar Value for RLAR register.
+*/   
+__STATIC_INLINE void ARM_MPU_SetRegion(uint32_t rnr, uint32_t rbar, uint32_t rlar)
+{
+  ARM_MPU_SetRegionEx(MPU, rnr, rbar, rlar);
+}
+
+#ifdef MPU_NS
+/** Configure the given Non-secure MPU region.
+* \param rnr Region number to be configured.
+* \param rbar Value for RBAR register.
+* \param rlar Value for RLAR register.
+*/   
+__STATIC_INLINE void ARM_MPU_SetRegion_NS(uint32_t rnr, uint32_t rbar, uint32_t rlar)
+{
+  ARM_MPU_SetRegionEx(MPU_NS, rnr, rbar, rlar);  
+}
+#endif
+
+/** Memcopy with strictly ordered memory access, e.g. for register targets.
+* \param dst Destination data is copied to.
+* \param src Source data is copied from.
+* \param len Amount of data words to be copied.
+*/
+__STATIC_INLINE void ARM_MPU_OrderedMemcpy(volatile uint32_t* dst, const uint32_t* __RESTRICT src, uint32_t len)
+{
+  uint32_t i;
+  for (i = 0U; i < len; ++i) 
+  {
+    dst[i] = src[i];
+  }
+}
+
+/** Load the given number of MPU regions from a table to the given MPU.
+* \param mpu Pointer to the MPU registers to be used.
+* \param rnr First region number to be configured.
+* \param table Pointer to the MPU configuration table.
+* \param cnt Amount of regions to be configured.
+*/
+__STATIC_INLINE void ARM_MPU_LoadEx(MPU_Type* mpu, uint32_t rnr, ARM_MPU_Region_t const* table, uint32_t cnt) 
+{
+  const uint32_t rowWordSize = sizeof(ARM_MPU_Region_t)/4U;
+  if (cnt == 1U) {
+    mpu->RNR = rnr;
+    ARM_MPU_OrderedMemcpy(&(mpu->RBAR), &(table->RBAR), rowWordSize);
+  } else {
+    uint32_t rnrBase   = rnr & ~(MPU_TYPE_RALIASES-1U);
+    uint32_t rnrOffset = rnr % MPU_TYPE_RALIASES;
+    
+    mpu->RNR = rnrBase;
+    while ((rnrOffset + cnt) > MPU_TYPE_RALIASES) {
+      uint32_t c = MPU_TYPE_RALIASES - rnrOffset;
+      ARM_MPU_OrderedMemcpy(&(mpu->RBAR)+(rnrOffset*2U), &(table->RBAR), c*rowWordSize);
+      table += c;
+      cnt -= c;
+      rnrOffset = 0U;
+      rnrBase += MPU_TYPE_RALIASES;
+      mpu->RNR = rnrBase;
+    }
+    
+    ARM_MPU_OrderedMemcpy(&(mpu->RBAR)+(rnrOffset*2U), &(table->RBAR), cnt*rowWordSize);
+  }
+}
+
+/** Load the given number of MPU regions from a table.
+* \param rnr First region number to be configured.
+* \param table Pointer to the MPU configuration table.
+* \param cnt Amount of regions to be configured.
+*/
+__STATIC_INLINE void ARM_MPU_Load(uint32_t rnr, ARM_MPU_Region_t const* table, uint32_t cnt) 
+{
+  ARM_MPU_LoadEx(MPU, rnr, table, cnt);
+}
+
+#ifdef MPU_NS
+/** Load the given number of MPU regions from a table to the Non-secure MPU.
+* \param rnr First region number to be configured.
+* \param table Pointer to the MPU configuration table.
+* \param cnt Amount of regions to be configured.
+*/
+__STATIC_INLINE void ARM_MPU_Load_NS(uint32_t rnr, ARM_MPU_Region_t const* table, uint32_t cnt) 
+{
+  ARM_MPU_LoadEx(MPU_NS, rnr, table, cnt);
+}
+#endif
+
+#endif
+

meta-st/meta-st-stm32mp-addons/mx/stm32mp157d-vrpmdv-mon-mx/Drivers/CMSIS/Include/tz_context.h

@@ -0,0 +1,70 @@
+/******************************************************************************
+ * @file     tz_context.h
+ * @brief    Context Management for Armv8-M TrustZone
+ * @version  V1.0.1
+ * @date     10. January 2018
+ ******************************************************************************/
+/*
+ * Copyright (c) 2017-2018 Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#if   defined ( __ICCARM__ )
+  #pragma system_include         /* treat file as system include file for MISRA check */
+#elif defined (__clang__)
+  #pragma clang system_header   /* treat file as system include file */
+#endif
+
+#ifndef TZ_CONTEXT_H
+#define TZ_CONTEXT_H
+ 
+#include <stdint.h>
+ 
+#ifndef TZ_MODULEID_T
+#define TZ_MODULEID_T
+/// \details Data type that identifies secure software modules called by a process.
+typedef uint32_t TZ_ModuleId_t;
+#endif
+ 
+/// \details TZ Memory ID identifies an allocated memory slot.
+typedef uint32_t TZ_MemoryId_t;
+  
+/// Initialize secure context memory system
+/// \return execution status (1: success, 0: error)
+uint32_t TZ_InitContextSystem_S (void);
+ 
+/// Allocate context memory for calling secure software modules in TrustZone
+/// \param[in]  module   identifies software modules called from non-secure mode
+/// \return value != 0 id TrustZone memory slot identifier
+/// \return value 0    no memory available or internal error
+TZ_MemoryId_t TZ_AllocModuleContext_S (TZ_ModuleId_t module);
+ 
+/// Free context memory that was previously allocated with \ref TZ_AllocModuleContext_S
+/// \param[in]  id  TrustZone memory slot identifier
+/// \return execution status (1: success, 0: error)
+uint32_t TZ_FreeModuleContext_S (TZ_MemoryId_t id);
+ 
+/// Load secure context (called on RTOS thread context switch)
+/// \param[in]  id  TrustZone memory slot identifier
+/// \return execution status (1: success, 0: error)
+uint32_t TZ_LoadContext_S (TZ_MemoryId_t id);
+ 
+/// Store secure context (called on RTOS thread context switch)
+/// \param[in]  id  TrustZone memory slot identifier
+/// \return execution status (1: success, 0: error)
+uint32_t TZ_StoreContext_S (TZ_MemoryId_t id);
+ 
+#endif  // TZ_CONTEXT_H

meta-st/meta-st-stm32mp-addons/mx/stm32mp157d-vrpmdv-mon-mx/Drivers/CMSIS/LICENSE.txt

@@ -0,0 +1,201 @@
+                                 Apache License
+                           Version 2.0, January 2004
+                        http://www.apache.org/licenses/
+
+   TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION
+
+   1. Definitions.
+
+      "License" shall mean the terms and conditions for use, reproduction,
+      and distribution as defined by Sections 1 through 9 of this document.
+
+      "Licensor" shall mean the copyright owner or entity authorized by
+      the copyright owner that is granting the License.
+
+      "Legal Entity" shall mean the union of the acting entity and all
+      other entities that control, are controlled by, or are under common
+      control with that entity. For the purposes of this definition,
+      "control" means (i) the power, direct or indirect, to cause the
+      direction or management of such entity, whether by contract or
+      otherwise, or (ii) ownership of fifty percent (50%) or more of the
+      outstanding shares, or (iii) beneficial ownership of such entity.
+
+      "You" (or "Your") shall mean an individual or Legal Entity
+      exercising permissions granted by this License.
+
+      "Source" form shall mean the preferred form for making modifications,
+      including but not limited to software source code, documentation
+      source, and configuration files.
+
+      "Object" form shall mean any form resulting from mechanical
+      transformation or translation of a Source form, including but
+      not limited to compiled object code, generated documentation,
+      and conversions to other media types.
+
+      "Work" shall mean the work of authorship, whether in Source or
+      Object form, made available under the License, as indicated by a
+      copyright notice that is included in or attached to the work
+      (an example is provided in the Appendix below).
+
+      "Derivative Works" shall mean any work, whether in Source or Object
+      form, that is based on (or derived from) the Work and for which the
+      editorial revisions, annotations, elaborations, or other modifications
+      represent, as a whole, an original work of authorship. For the purposes
+      of this License, Derivative Works shall not include works that remain
+      separable from, or merely link (or bind by name) to the interfaces of,
+      the Work and Derivative Works thereof.
+
+      "Contribution" shall mean any work of authorship, including
+      the original version of the Work and any modifications or additions
+      to that Work or Derivative Works thereof, that is intentionally
+      submitted to Licensor for inclusion in the Work by the copyright owner
+      or by an individual or Legal Entity authorized to submit on behalf of
+      the copyright owner. For the purposes of this definition, "submitted"
+      means any form of electronic, verbal, or written communication sent
+      to the Licensor or its representatives, including but not limited to
+      communication on electronic mailing lists, source code control systems,
+      and issue tracking systems that are managed by, or on behalf of, the
+      Licensor for the purpose of discussing and improving the Work, but
+      excluding communication that is conspicuously marked or otherwise
+      designated in writing by the copyright owner as "Not a Contribution."
+
+      "Contributor" shall mean Licensor and any individual or Legal Entity
+      on behalf of whom a Contribution has been received by Licensor and
+      subsequently incorporated within the Work.
+
+   2. Grant of Copyright License. Subject to the terms and conditions of
+      this License, each Contributor hereby grants to You a perpetual,
+      worldwide, non-exclusive, no-charge, royalty-free, irrevocable
+      copyright license to reproduce, prepare Derivative Works of,
+      publicly display, publicly perform, sublicense, and distribute the
+      Work and such Derivative Works in Source or Object form.
+
+   3. Grant of Patent License. Subject to the terms and conditions of
+      this License, each Contributor hereby grants to You a perpetual,
+      worldwide, non-exclusive, no-charge, royalty-free, irrevocable
+      (except as stated in this section) patent license to make, have made,
+      use, offer to sell, sell, import, and otherwise transfer the Work,
+      where such license applies only to those patent claims licensable
+      by such Contributor that are necessarily infringed by their
+      Contribution(s) alone or by combination of their Contribution(s)
+      with the Work to which such Contribution(s) was submitted. If You
+      institute patent litigation against any entity (including a
+      cross-claim or counterclaim in a lawsuit) alleging that the Work
+      or a Contribution incorporated within the Work constitutes direct
+      or contributory patent infringement, then any patent licenses
+      granted to You under this License for that Work shall terminate
+      as of the date such litigation is filed.
+
+   4. Redistribution. You may reproduce and distribute copies of the
+      Work or Derivative Works thereof in any medium, with or without
+      modifications, and in Source or Object form, provided that You
+      meet the following conditions:
+
+      (a) You must give any other recipients of the Work or
+          Derivative Works a copy of this License; and
+
+      (b) You must cause any modified files to carry prominent notices
+          stating that You changed the files; and
+
+      (c) You must retain, in the Source form of any Derivative Works
+          that You distribute, all copyright, patent, trademark, and
+          attribution notices from the Source form of the Work,
+          excluding those notices that do not pertain to any part of
+          the Derivative Works; and
+
+      (d) If the Work includes a "NOTICE" text file as part of its
+          distribution, then any Derivative Works that You distribute must
+          include a readable copy of the attribution notices contained
+          within such NOTICE file, excluding those notices that do not
+          pertain to any part of the Derivative Works, in at least one
+          of the following places: within a NOTICE text file distributed
+          as part of the Derivative Works; within the Source form or
+          documentation, if provided along with the Derivative Works; or,
+          within a display generated by the Derivative Works, if and
+          wherever such third-party notices normally appear. The contents
+          of the NOTICE file are for informational purposes only and
+          do not modify the License. You may add Your own attribution
+          notices within Derivative Works that You distribute, alongside
+          or as an addendum to the NOTICE text from the Work, provided
+          that such additional attribution notices cannot be construed
+          as modifying the License.
+
+      You may add Your own copyright statement to Your modifications and
+      may provide additional or different license terms and conditions
+      for use, reproduction, or distribution of Your modifications, or
+      for any such Derivative Works as a whole, provided Your use,
+      reproduction, and distribution of the Work otherwise complies with
+      the conditions stated in this License.
+
+   5. Submission of Contributions. Unless You explicitly state otherwise,
+      any Contribution intentionally submitted for inclusion in the Work
+      by You to the Licensor shall be under the terms and conditions of
+      this License, without any additional terms or conditions.
+      Notwithstanding the above, nothing herein shall supersede or modify
+      the terms of any separate license agreement you may have executed
+      with Licensor regarding such Contributions.
+
+   6. Trademarks. This License does not grant permission to use the trade
+      names, trademarks, service marks, or product names of the Licensor,
+      except as required for reasonable and customary use in describing the
+      origin of the Work and reproducing the content of the NOTICE file.
+
+   7. Disclaimer of Warranty. Unless required by applicable law or
+      agreed to in writing, Licensor provides the Work (and each
+      Contributor provides its Contributions) on an "AS IS" BASIS,
+      WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
+      implied, including, without limitation, any warranties or conditions
+      of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A
+      PARTICULAR PURPOSE. You are solely responsible for determining the
+      appropriateness of using or redistributing the Work and assume any
+      risks associated with Your exercise of permissions under this License.
+
+   8. Limitation of Liability. In no event and under no legal theory,
+      whether in tort (including negligence), contract, or otherwise,
+      unless required by applicable law (such as deliberate and grossly
+      negligent acts) or agreed to in writing, shall any Contributor be
+      liable to You for damages, including any direct, indirect, special,
+      incidental, or consequential damages of any character arising as a
+      result of this License or out of the use or inability to use the
+      Work (including but not limited to damages for loss of goodwill,
+      work stoppage, computer failure or malfunction, or any and all
+      other commercial damages or losses), even if such Contributor
+      has been advised of the possibility of such damages.
+
+   9. Accepting Warranty or Additional Liability. While redistributing
+      the Work or Derivative Works thereof, You may choose to offer,
+      and charge a fee for, acceptance of support, warranty, indemnity,
+      or other liability obligations and/or rights consistent with this
+      License. However, in accepting such obligations, You may act only
+      on Your own behalf and on Your sole responsibility, not on behalf
+      of any other Contributor, and only if You agree to indemnify,
+      defend, and hold each Contributor harmless for any liability
+      incurred by, or claims asserted against, such Contributor by reason
+      of your accepting any such warranty or additional liability.
+
+   END OF TERMS AND CONDITIONS
+
+   APPENDIX: How to apply the Apache License to your work.
+
+      To apply the Apache License to your work, attach the following
+      boilerplate notice, with the fields enclosed by brackets "{}"
+      replaced with your own identifying information. (Don't include
+      the brackets!)  The text should be enclosed in the appropriate
+      comment syntax for the file format. We also recommend that a
+      file or class name and description of purpose be included on the
+      same "printed page" as the copyright notice for easier
+      identification within third-party archives.
+
+   Copyright {yyyy} {name of copyright owner}
+
+   Licensed under the Apache License, Version 2.0 (the "License");
+   you may not use this file except in compliance with the License.
+   You may obtain a copy of the License at
+
+       http://www.apache.org/licenses/LICENSE-2.0
+
+   Unless required by applicable law or agreed to in writing, software
+   distributed under the License is distributed on an "AS IS" BASIS,
+   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+   See the License for the specific language governing permissions and
+   limitations under the License.

meta-st/meta-st-stm32mp-addons/mx/stm32mp157d-vrpmdv-mon-mx/Drivers/STM32MP1xx_HAL_Driver/Inc/stm32mp1xx_hal.h

@@ -0,0 +1,802 @@
+/**
+  ******************************************************************************
+  * @file    stm32mp1xx_hal.h
+  * @author  MCD Application Team
+  * @brief   This file contains all the functions prototypes for the HAL
+  *          module driver.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32MP1xx_HAL_H
+#define STM32MP1xx_HAL_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32mp1xx_hal_conf.h"
+
+/** @addtogroup STM32MP1xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup HAL
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup HAL_Exported_Types HAL Exported Types
+  * @{
+  */
+/** @defgroup HAL_Exported_Types_Group1 Tick Frequency
+ * @{
+ */
+typedef enum
+{
+  HAL_TICK_FREQ_10HZ         = 100U,
+  HAL_TICK_FREQ_100HZ        = 10U,
+  HAL_TICK_FREQ_1KHZ         = 1U,
+  HAL_TICK_FREQ_DEFAULT      = HAL_TICK_FREQ_1KHZ
+} HAL_TickFreqTypeDef;
+/**
+ * @}
+ */
+
+/** @defgroup HAL_Exported_Types_Group2 HDP SW Signal
+ * @{
+ */
+
+ /**
+  * @brief  HDP SW Signal SET and Bit RESET enumeration
+  */
+typedef enum
+{
+  HDP_SW_SIGNAL_RESET = 0,
+  HDP_SW_SIGNAL_SET
+}HDP_SwSignalState;
+/**
+ * @}
+ */
+ 
+ /**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup HAL_Exported_Constants HAL Exported Constants
+  * @{
+  */
+  
+/** @defgroup HAL_Exported_Constants_Group1 SYSCFG VREFBUF Voltage Scale
+  * @{
+  */
+#define SYSCFG_VREFBUF_VOLTAGE_SCALE0   VREFBUF_CSR_VRS_OUT2   /*!< Voltage reference scale 0 (VREF_OUT2) */
+#define SYSCFG_VREFBUF_VOLTAGE_SCALE1   VREFBUF_CSR_VRS_OUT1   /*!< Voltage reference scale 1 (VREF_OUT1) */
+#define SYSCFG_VREFBUF_VOLTAGE_SCALE2   VREFBUF_CSR_VRS_OUT4   /*!< Voltage reference scale 2 (VREF_OUT4) */
+#define SYSCFG_VREFBUF_VOLTAGE_SCALE3   VREFBUF_CSR_VRS_OUT3   /*!< Voltage reference scale 3 (VREF_OUT3) */
+
+
+#define IS_SYSCFG_VREFBUF_VOLTAGE_SCALE(__SCALE__)  (((__SCALE__) == SYSCFG_VREFBUF_VOLTAGE_SCALE0) || \
+                                                     ((__SCALE__) == SYSCFG_VREFBUF_VOLTAGE_SCALE1) || \
+                                                     ((__SCALE__) == SYSCFG_VREFBUF_VOLTAGE_SCALE2) || \
+                                                     ((__SCALE__) == SYSCFG_VREFBUF_VOLTAGE_SCALE3))
+
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_Exported_Constants_Group2 SYSCFG VREFBUF High Impedance
+  * @{
+  */
+#define SYSCFG_VREFBUF_HIGH_IMPEDANCE_DISABLE  ((uint32_t)0x00000000) /*!< VREF_plus pin is internally connected to Voltage reference buffer output */
+#define SYSCFG_VREFBUF_HIGH_IMPEDANCE_ENABLE   VREFBUF_CSR_HIZ        /*!< VREF_plus pin is high impedance */
+
+#define IS_SYSCFG_VREFBUF_HIGH_IMPEDANCE(__VALUE__)  (((__VALUE__) == SYSCFG_VREFBUF_HIGH_IMPEDANCE_DISABLE) || \
+                                                      ((__VALUE__) == SYSCFG_VREFBUF_HIGH_IMPEDANCE_ENABLE))
+
+#define IS_SYSCFG_VREFBUF_TRIMMING(__VALUE__)  (((__VALUE__) > 0) && ((__VALUE__) <= VREFBUF_CCR_TRIM))
+
+/**
+  * @}
+  */
+
+
+/** @defgroup HAL_Exported_Constants_Group3 SYSCFG Ethernet Config
+  * @{
+  */
+
+#define SYSCFG_ETH_MII                      SYSCFG_PMCSETR_ETH_SELMII_SEL  /*!< Select the Media Independent Interface         */
+#define SYSCFG_ETH_GMII                     ((uint32_t)0x00000000)         /*!< Select the Gigabit Media Independent Interface */
+#define SYSCFG_ETH_RMII                     SYSCFG_PMCSETR_ETH_SEL_2       /*!< Select the Reduced Media Independent Interface */
+#define SYSCFG_ETH_RGMII                    SYSCFG_PMCSETR_ETH_SEL_0       /*!< Select the Reduced Gigabit Media Independent Interface */
+
+#define IS_SYSCFG_ETHERNET_CONFIG(CONFIG) (((CONFIG) == SYSCFG_ETH_MII)        || \
+                                          ((CONFIG) == SYSCFG_ETH_RMII)        || \
+                                          ((CONFIG) == SYSCFG_ETH_GMII)        || \
+                                          ((CONFIG) == SYSCFG_ETH_RGMII))
+
+/**
+  * @}
+  */
+
+
+/** @defgroup HAL_Exported_Constants_Group4 SYSCFG Analog Switch Config
+  * @{
+  */
+#define SYSCFG_SWITCH_PA0                       SYSCFG_PMCSETR_ANA0_SEL_SEL  /*!< Select PA0 analog switch */
+#define SYSCFG_SWITCH_PA1                       SYSCFG_PMCSETR_ANA1_SEL_SEL  /*!< Select PA1 analog switch */
+
+
+#define IS_SYSCFG_ANALOG_SWITCH(SWITCH)    ((((SWITCH) & SYSCFG_SWITCH_PA0) == SYSCFG_SWITCH_PA0)|| \
+                                           (((SWITCH) & SYSCFG_SWITCH_PA1) == SYSCFG_SWITCH_PA1))
+
+
+#define SYSCFG_SWITCH_PA0_OPEN                       SYSCFG_PMCSETR_ANA0_SEL_SEL       /*!< PA0 analog switch opened */
+#define SYSCFG_SWITCH_PA0_CLOSE                      ((uint32_t)0x00000000)         /*!< PA0 analog switch closed */
+#define SYSCFG_SWITCH_PA1_OPEN                       SYSCFG_PMCSETR_ANA1_SEL_SEL       /*!< PA1 analog switch opened */
+#define SYSCFG_SWITCH_PA1_CLOSE                      ((uint32_t)0x00000000)         /*!< PA1 analog switch closed*/
+
+#define IS_SYSCFG_SWITCH_STATE(STATE)      ((((STATE) & SYSCFG_SWITCH_PA0_OPEN) == SYSCFG_SWITCH_PA0_OPEN)    || \
+                                           (((STATE) & SYSCFG_SWITCH_PA0_CLOSE) == SYSCFG_SWITCH_PA0_CLOSE)   || \
+                                           (((STATE) & SYSCFG_SWITCH_PA1_OPEN) == SYSCFG_SWITCH_PA1_OPEN)     || \
+                                           (((STATE) & SYSCFG_SWITCH_PA1_CLOSE) == SYSCFG_SWITCH_PA1_CLOSE))
+/**
+  * @}
+  */
+										   
+/** @defgroup HAL_Exported_Constants_Group5 SYSCFG IOCompenstionCell Config
+  * @{
+  */
+#define SYSCFG_CELL_CODE                    ((uint32_t)0x00000000)  /*!< Select Code from the cell */
+#define SYSCFG_REGISTER_CODE                SYSCFG_CMPCR_SW_CTRL    /*!< Code from the SYSCFG compensation cell code register */
+
+#define IS_SYSCFG_CODE_SELECT(SELECT) (((SELECT) == SYSCFG_CELL_CODE)|| \
+                                        ((SELECT) == SYSCFG_REGISTER_CODE))
+
+#define IS_SYSCFG_CODE_CONFIG(CONFIG) ((CONFIG) < (0x10))
+
+/** @brief  Check SYSCFG Compensation Cell Ready flag is set or not.
+  * @retval State of bit (1 or 0)
+  */
+#define __HAL_SYSCFG_CMP_CELL_GET_FLAG() ((READ_BIT(SYSCFG->CMPCR, SYSCFG_CMPCR_READY) == (SYSCFG_CMPCR_READY)) ? 1U : 0U)
+
+/**
+  * @brief  Get I/O compensation cell value for PMOS transistors
+  * @retval The I/O compensation cell value for PMOS transistors
+  */
+#define __HAL_SYSCFG_GET_PMOS_CMP() (READ_BIT(SYSCFG->CMPCR, SYSCFG_CMPCR_APSRC))
+
+/**
+  * @brief  Get I/O compensation cell value for NMOS transistors
+  * @retval Returned value is the I/O compensation cell value for NMOS transistors
+  */
+#define __HAL_SYSCFG_GET_NMOS_CMP() (READ_BIT(SYSCFG->CMPCR, SYSCFG_CMPCR_ANSRC))
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_Exported_Constants_Group6 SYSCFG IOControl HighSpeed Config
+  * @{
+  */
+
+#define SYSCFG_HIGHSPEED_TRACE_SIGNAL   SYSCFG_IOCTRLSETR_HSLVEN_TRACE   /*!< High Speed Low Voltage Pad mode Enable when a TRACEx signal is selected in AFMUX */
+#define SYSCFG_HIGHSPEED_QUADSPI_SIGNAL SYSCFG_IOCTRLSETR_HSLVEN_QUADSPI /*!< High Speed Low Voltage Pad mode Enable when a QUADSPI_x signal is selected in AFMUX */
+#define SYSCFG_HIGHSPEED_ETH_SIGNAL     SYSCFG_IOCTRLSETR_HSLVEN_ETH     /*!< High Speed Low Voltage Pad mode Enable when a ETH_x signal is selected in AFMUX */
+#define SYSCFG_HIGHSPEED_SDMMC_SIGNAL   SYSCFG_IOCTRLSETR_HSLVEN_SDMMC   /*!< High Speed Low Voltage Pad mode Enable when a SDMMCy_x signal is selected in AFMUX */
+#define SYSCFG_HIGHSPEED_SPI_SIGNAL     SYSCFG_IOCTRLSETR_HSLVEN_SPI     /*!< High Speed Low Voltage Pad mode Enable when a SPIy_x signal is selected in AFMUX */
+
+
+/**
+  * @}
+  */
+
+
+/** @defgroup HAL_Exported_Constants_Group7 HDP Software signal define
+  * @{
+  */
+#define HDP_SW_SIGNAL_0                 ((uint8_t)0x01U)  /* HDP Software signal 0 selected    */
+#define HDP_SW_SIGNAL_1                 ((uint8_t)0x02U)  /* HDP Software signal 1 selected    */
+#define HDP_SW_SIGNAL_2                 ((uint8_t)0x04U)  /* HDP Software signal 2 selected    */
+#define HDP_SW_SIGNAL_3                 ((uint8_t)0x08U)  /* HDP Software signal 3 selected    */
+#define HDP_SW_SIGNAL_4                 ((uint8_t)0x10U)  /* HDP Software signal 4 selected    */
+#define HDP_SW_SIGNAL_5                 ((uint8_t)0x20U)  /* HDP Software signal 5 selected    */
+#define HDP_SW_SIGNAL_6                 ((uint8_t)0x40U)  /* HDP Software signal 6 selected    */
+#define HDP_SW_SIGNAL_7                 ((uint8_t)0x80U)  /* HDP Software signal 7 selected    */
+
+/**
+ * @}
+ */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @defgroup DBGMCU_Exported_Macros DBGMCU Exported Macros
+  * @{
+  */
+
+/** @brief  Freeze/Unfreeze Peripherals in Debug mode
+  */ 
+#if defined (CORE_CM4)
+#if defined(DBGMCU_APB1_FZ_DBG_TIM2_STOP)
+#define __HAL_DBGMCU_FREEZE_TIM2()           SET_BIT(DBGMCU->APB1FZ2, DBGMCU_APB1_FZ_DBG_TIM2_STOP)
+#define __HAL_DBGMCU_UNFREEZE_TIM2()         CLEAR_BIT(DBGMCU->APB1FZ2, DBGMCU_APB1_FZ_DBG_TIM2_STOP)
+#endif
+#if defined(DBGMCU_APB1_FZ_DBG_TIM3_STOP)
+#define __HAL_DBGMCU_FREEZE_TIM3()           SET_BIT(DBGMCU->APB1FZ2, DBGMCU_APB1_FZ_DBG_TIM3_STOP)
+#define __HAL_DBGMCU_UNFREEZE_TIM3()         CLEAR_BIT(DBGMCU->APB1FZ2, DBGMCU_APB1_FZ_DBG_TIM3_STOP)
+#endif
+#if defined(DBGMCU_APB1_FZ_DBG_TIM4_STOP)
+#define __HAL_DBGMCU_FREEZE_TIM4()           SET_BIT(DBGMCU->APB1FZ2, DBGMCU_APB1_FZ_DBG_TIM4_STOP)
+#define __HAL_DBGMCU_UNFREEZE_TIM4()         CLEAR_BIT(DBGMCU->APB1FZ2, DBGMCU_APB1_FZ_DBG_TIM4_STOP)
+#endif
+#if defined(DBGMCU_APB1_FZ_DBG_TIM5_STOP)
+#define __HAL_DBGMCU_FREEZE_TIM5()           SET_BIT(DBGMCU->APB1FZ2, DBGMCU_APB1_FZ_DBG_TIM5_STOP)
+#define __HAL_DBGMCU_UNFREEZE_TIM5()         CLEAR_BIT(DBGMCU->APB1FZ2, DBGMCU_APB1_FZ_DBG_TIM5_STOP)
+#endif
+#if defined(DBGMCU_APB1_FZ_DBG_TIM6_STOP)
+#define __HAL_DBGMCU_FREEZE_TIM6()           SET_BIT(DBGMCU->APB1FZ2, DBGMCU_APB1_FZ_DBG_TIM6_STOP)
+#define __HAL_DBGMCU_UNFREEZE_TIM6()         CLEAR_BIT(DBGMCU->APB1FZ2, DBGMCU_APB1_FZ_DBG_TIM6_STOP)
+#endif
+#if defined(DBGMCU_APB1_FZ_DBG_TIM7_STOP)
+#define __HAL_DBGMCU_FREEZE_TIM7()           SET_BIT(DBGMCU->APB1FZ2, DBGMCU_APB1_FZ_DBG_TIM7_STOP)
+#define __HAL_DBGMCU_UNFREEZE_TIM7()         CLEAR_BIT(DBGMCU->APB1FZ2, DBGMCU_APB1_FZ_DBG_TIM7_STOP)
+#endif
+#if defined(DBGMCU_APB1_FZ_DBG_TIM12_STOP)
+#define __HAL_DBGMCU_FREEZE_TIM12()           SET_BIT(DBGMCU->APB1FZ2, DBGMCU_APB1_FZ_DBG_TIM12_STOP)
+#define __HAL_DBGMCU_UNFREEZE_TIM12()         CLEAR_BIT(DBGMCU->APB1FZ2, DBGMCU_APB1_FZ_DBG_TIM12_STOP)
+#endif
+#if defined(DBGMCU_APB1_FZ_DBG_TIM13_STOP)
+#define __HAL_DBGMCU_FREEZE_TIM13()           SET_BIT(DBGMCU->APB1FZ2, DBGMCU_APB1_FZ_DBG_TIM13_STOP)
+#define __HAL_DBGMCU_UNFREEZE_TIM13()         CLEAR_BIT(DBGMCU->APB1FZ2, DBGMCU_APB1_FZ_DBG_TIM13_STOP)
+#endif
+#if defined(DBGMCU_APB1_FZ_DBG_TIM14_STOP)
+#define __HAL_DBGMCU_FREEZE_TIM14()           SET_BIT(DBGMCU->APB1FZ2, DBGMCU_APB1_FZ_DBG_TIM14_STOP)
+#define __HAL_DBGMCU_UNFREEZE_TIM14()         CLEAR_BIT(DBGMCU->APB1FZ2, DBGMCU_APB1_FZ_DBG_TIM14_STOP)
+#endif
+#if defined(DBGMCU_APB1_FZ_DBG_LPTIM1_STOP)
+#define __HAL_DBGMCU_FREEZE_LPTIM1()           SET_BIT(DBGMCU->APB1FZ2, DBGMCU_APB1_FZ_DBG_LPTIM1_STOP)
+#define __HAL_DBGMCU_UNFREEZE_LPTIM1()         CLEAR_BIT(DBGMCU->APB1FZ2, DBGMCU_APB1_FZ_DBG_LPTIM1_STOP)
+#endif
+#if defined(DBGMCU_APB1_FZ_DBG_WWDG1_STOP)
+#define __HAL_DBGMCU_FREEZE_WWDG1()           SET_BIT(DBGMCU->APB1FZ2, DBGMCU_APB1_FZ_DBG_WWDG1_STOP)
+#define __HAL_DBGMCU_UNFREEZE_WWDG1()         CLEAR_BIT(DBGMCU->APB1FZ2, DBGMCU_APB1_FZ_DBG_WWDG1_STOP)
+#endif
+#if defined(DBGMCU_APB1_FZ_DBG_I2C1_STOP)
+#define __HAL_DBGMCU_FREEZE_I2C1()           SET_BIT(DBGMCU->APB1FZ2, DBGMCU_APB1_FZ_DBG_I2C1_STOP)
+#define __HAL_DBGMCU_UNFREEZE_I2C1()         CLEAR_BIT(DBGMCU->APB1FZ2, DBGMCU_APB1_FZ_DBG_I2C1_STOP)
+#endif
+#if defined(DBGMCU_APB1_FZ_DBG_I2C2_STOP)
+#define __HAL_DBGMCU_FREEZE_I2C2()           SET_BIT(DBGMCU->APB1FZ2, DBGMCU_APB1_FZ_DBG_I2C2_STOP)
+#define __HAL_DBGMCU_UNFREEZE_I2C2()         CLEAR_BIT(DBGMCU->APB1FZ2, DBGMCU_APB1_FZ_DBG_I2C2_STOP)
+#endif
+#if defined(DBGMCU_APB1_FZ_DBG_I2C3_STOP)
+#define __HAL_DBGMCU_FREEZE_I2C3()           SET_BIT(DBGMCU->APB1FZ2, DBGMCU_APB1_FZ_DBG_I2C3_STOP)
+#define __HAL_DBGMCU_UNFREEZE_I2C3()         CLEAR_BIT(DBGMCU->APB1FZ2, DBGMCU_APB1_FZ_DBG_I2C3_STOP)
+#endif
+#if defined(DBGMCU_APB1_FZ_DBG_I2C5_STOP)
+#define __HAL_DBGMCU_FREEZE_I2C5()           SET_BIT(DBGMCU->APB1FZ2, DBGMCU_APB1_FZ_DBG_I2C5_STOP)
+#define __HAL_DBGMCU_UNFREEZE_I2C5()         CLEAR_BIT(DBGMCU->APB1FZ2, DBGMCU_APB1_FZ_DBG_I2C5_STOP)
+#endif
+
+#if defined(DBGMCU_APB2_FZ_DBG_TIM1_STOP)
+#define __HAL_DBGMCU_FREEZE_TIM1()           SET_BIT(DBGMCU->APB2FZ2, DBGMCU_APB2_FZ_DBG_TIM1_STOP)
+#define __HAL_DBGMCU_UNFREEZE_TIM1()         CLEAR_BIT(DBGMCU->APB2FZ2, DBGMCU_APB2_FZ_DBG_TIM1_STOP)
+#endif
+#if defined(DBGMCU_APB2_FZ_DBG_TIM8_STOP)
+#define __HAL_DBGMCU_FREEZE_TIM8()           SET_BIT(DBGMCU->APB2FZ2, DBGMCU_APB2_FZ_DBG_TIM8_STOP)
+#define __HAL_DBGMCU_UNFREEZE_TIM8()         CLEAR_BIT(DBGMCU->APB2FZ2, DBGMCU_APB2_FZ_DBG_TIM8_STOP)
+#endif
+#if defined(DBGMCU_APB2_FZ_DBG_TIM15_STOP)
+#define __HAL_DBGMCU_FREEZE_TIM15()           SET_BIT(DBGMCU->APB2FZ2, DBGMCU_APB2_FZ_DBG_TIM15_STOP)
+#define __HAL_DBGMCU_UNFREEZE_TIM15()         CLEAR_BIT(DBGMCU->APB2FZ2, DBGMCU_APB2_FZ_DBG_TIM15_STOP)
+#endif
+#if defined(DBGMCU_APB2_FZ_DBG_TIM16_STOP)
+#define __HAL_DBGMCU_FREEZE_TIM16()           SET_BIT(DBGMCU->APB2FZ2, DBGMCU_APB2_FZ_DBG_TIM16_STOP)
+#define __HAL_DBGMCU_UNFREEZE_TIM16()         CLEAR_BIT(DBGMCU->APB2FZ2, DBGMCU_APB2_FZ_DBG_TIM16_STOP)
+#endif
+#if defined(DBGMCU_APB2_FZ_DBG_TIM17_STOP)
+#define __HAL_DBGMCU_FREEZE_TIM17()           SET_BIT(DBGMCU->APB2FZ2, DBGMCU_APB2_FZ_DBG_TIM17_STOP)
+#define __HAL_DBGMCU_UNFREEZE_TIM17()         CLEAR_BIT(DBGMCU->APB2FZ2, DBGMCU_APB2_FZ_DBG_TIM17_STOP)
+#endif
+#if defined(DBGMCU_APB2_FZ_DBG_FDCAN_STOP)
+#define __HAL_DBGMCU_FREEZE_FDCAN()           SET_BIT(DBGMCU->APB2FZ2, DBGMCU_APB2_FZ_DBG_FDCAN_STOP)
+#define __HAL_DBGMCU_UNFREEZE_FDCAN()         CLEAR_BIT(DBGMCU->APB2FZ2, DBGMCU_APB2_FZ_DBG_FDCAN_STOP)
+#endif
+
+#if defined(DBGMCU_APB3_FZ_DBG_LPTIM2_STOP)
+#define __HAL_DBGMCU_FREEZE_LPTIM2()           SET_BIT(DBGMCU->APB3FZ2, DBGMCU_APB3_FZ_DBG_LPTIM2_STOP)
+#define __HAL_DBGMCU_UNFREEZE_LPTIM2()         CLEAR_BIT(DBGMCU->APB3FZ2, DBGMCU_APB3_FZ_DBG_LPTIM2_STOP)
+#endif
+#if defined(DBGMCU_APB3_FZ_DBG_LPTIM3_STOP)
+#define __HAL_DBGMCU_FREEZE_LPTIM3()           SET_BIT(DBGMCU->APB3FZ2, DBGMCU_APB3_FZ_DBG_LPTIM3_STOP)
+#define __HAL_DBGMCU_UNFREEZE_LPTIM3()         CLEAR_BIT(DBGMCU->APB3FZ2, DBGMCU_APB3_FZ_DBG_LPTIM3_STOP)
+#endif
+#if defined(DBGMCU_APB3_FZ_DBG_LPTIM4_STOP)
+#define __HAL_DBGMCU_FREEZE_LPTIM4()           SET_BIT(DBGMCU->APB3FZ2, DBGMCU_APB3_FZ_DBG_LPTIM4_STOP)
+#define __HAL_DBGMCU_UNFREEZE_LPTIM4()         CLEAR_BIT(DBGMCU->APB3FZ2, DBGMCU_APB3_FZ_DBG_LPTIM4_STOP)
+#endif
+#if defined(DBGMCU_APB3_FZ_DBG_LPTIM5_STOP)
+#define __HAL_DBGMCU_FREEZE_LPTIM5()           SET_BIT(DBGMCU->APB3FZ2, DBGMCU_APB3_FZ_DBG_LPTIM5_STOP)
+#define __HAL_DBGMCU_UNFREEZE_LPTIM5()         CLEAR_BIT(DBGMCU->APB3FZ2, DBGMCU_APB3_FZ_DBG_LPTIM5_STOP)
+#endif
+
+#if defined(DBGMCU_APB5_FZ_DBG_I2C4_STOP)
+#define __HAL_DBGMCU_FREEZE_I2C4()           SET_BIT(DBGMCU->APB5FZ2, DBGMCU_APB5_FZ_DBG_I2C4_STOP)
+#define __HAL_DBGMCU_UNFREEZE_I2C4()         CLEAR_BIT(DBGMCU->APB5FZ2, DBGMCU_APB5_FZ_DBG_I2C4_STOP)
+#endif
+#if defined(DBGMCU_APB5_FZ_DBG_RTC_STOP)
+#define __HAL_DBGMCU_FREEZE_RTC()           SET_BIT(DBGMCU->APB5FZ2, DBGMCU_APB5_FZ_DBG_RTC_STOP)
+#define __HAL_DBGMCU_UNFREEZE_RTC()         CLEAR_BIT(DBGMCU->APB5FZ2, DBGMCU_APB5_FZ_DBG_RTC_STOP)
+#endif
+#if defined(DBGMCU_APB5_FZ_DBG_I2C6_STOP)
+#define __HAL_DBGMCU_FREEZE_I2C6()           SET_BIT(DBGMCU->APB5FZ2, DBGMCU_APB5_FZ_DBG_I2C6_STOP)
+#define __HAL_DBGMCU_UNFREEZE_I2C6()         CLEAR_BIT(DBGMCU->APB5FZ2, DBGMCU_APB5_FZ_DBG_I2C6_STOP)
+#endif
+#elif defined(CORE_CA7)
+
+#if defined(DBGMCU_APB4_FZ_DBG_IWDG2_STOP)
+#define __HAL_DBGMCU_FREEZE_IWDG2()           SET_BIT(DBGMCU->APB4FZ1, DBGMCU_APB4_FZ_DBG_IWDG2_STOP)
+#define __HAL_DBGMCU_UNFREEZE_IWDG2()         CLEAR_BIT(DBGMCU->APB4FZ1, DBGMCU_APB4_FZ_DBG_IWDG2_STOP)
+#endif
+
+#if defined(DBGMCU_APB1_FZ_DBG_TIM2_STOP)
+#define __HAL_DBGMCU_FREEZE_TIM2()           SET_BIT(DBGMCU->APB1FZ1, DBGMCU_APB1_FZ_DBG_TIM2_STOP)
+#define __HAL_DBGMCU_UNFREEZE_TIM2()         CLEAR_BIT(DBGMCU->APB1FZ1, DBGMCU_APB1_FZ_DBG_TIM2_STOP)
+#endif
+#if defined(DBGMCU_APB1_FZ_DBG_TIM3_STOP)
+#define __HAL_DBGMCU_FREEZE_TIM3()           SET_BIT(DBGMCU->APB1FZ1, DBGMCU_APB1_FZ_DBG_TIM3_STOP)
+#define __HAL_DBGMCU_UNFREEZE_TIM3()         CLEAR_BIT(DBGMCU->APB1FZ1, DBGMCU_APB1_FZ_DBG_TIM3_STOP)
+#endif
+#if defined(DBGMCU_APB1_FZ_DBG_TIM4_STOP)
+#define __HAL_DBGMCU_FREEZE_TIM4()           SET_BIT(DBGMCU->APB1FZ1, DBGMCU_APB1_FZ_DBG_TIM4_STOP)
+#define __HAL_DBGMCU_UNFREEZE_TIM4()         CLEAR_BIT(DBGMCU->APB1FZ1, DBGMCU_APB1_FZ_DBG_TIM4_STOP)
+#endif
+#if defined(DBGMCU_APB1_FZ_DBG_TIM5_STOP)
+#define __HAL_DBGMCU_FREEZE_TIM5()           SET_BIT(DBGMCU->APB1FZ1, DBGMCU_APB1_FZ_DBG_TIM5_STOP)
+#define __HAL_DBGMCU_UNFREEZE_TIM5()         CLEAR_BIT(DBGMCU->APB1FZ1, DBGMCU_APB1_FZ_DBG_TIM5_STOP)
+#endif
+#if defined(DBGMCU_APB1_FZ_DBG_TIM6_STOP)
+#define __HAL_DBGMCU_FREEZE_TIM6()           SET_BIT(DBGMCU->APB1FZ1, DBGMCU_APB1_FZ_DBG_TIM6_STOP)
+#define __HAL_DBGMCU_UNFREEZE_TIM6()         CLEAR_BIT(DBGMCU->APB1FZ1, DBGMCU_APB1_FZ_DBG_TIM6_STOP)
+#endif
+#if defined(DBGMCU_APB1_FZ_DBG_TIM7_STOP)
+#define __HAL_DBGMCU_FREEZE_TIM7()           SET_BIT(DBGMCU->APB1FZ1, DBGMCU_APB1_FZ_DBG_TIM7_STOP)
+#define __HAL_DBGMCU_UNFREEZE_TIM7()         CLEAR_BIT(DBGMCU->APB1FZ1, DBGMCU_APB1_FZ_DBG_TIM7_STOP)
+#endif
+#if defined(DBGMCU_APB1_FZ_DBG_TIM12_STOP)
+#define __HAL_DBGMCU_FREEZE_TIM12()           SET_BIT(DBGMCU->APB1FZ1, DBGMCU_APB1_FZ_DBG_TIM12_STOP)
+#define __HAL_DBGMCU_UNFREEZE_TIM12()         CLEAR_BIT(DBGMCU->APB1FZ1, DBGMCU_APB1_FZ_DBG_TIM12_STOP)
+#endif
+#if defined(DBGMCU_APB1_FZ_DBG_TIM13_STOP)
+#define __HAL_DBGMCU_FREEZE_TIM13()           SET_BIT(DBGMCU->APB1FZ1, DBGMCU_APB1_FZ_DBG_TIM13_STOP)
+#define __HAL_DBGMCU_UNFREEZE_TIM13()         CLEAR_BIT(DBGMCU->APB1FZ1, DBGMCU_APB1_FZ_DBG_TIM13_STOP)
+#endif
+#if defined(DBGMCU_APB1_FZ_DBG_TIM14_STOP)
+#define __HAL_DBGMCU_FREEZE_TIM14()           SET_BIT(DBGMCU->APB1FZ1, DBGMCU_APB1_FZ_DBG_TIM14_STOP)
+#define __HAL_DBGMCU_UNFREEZE_TIM14()         CLEAR_BIT(DBGMCU->APB1FZ1, DBGMCU_APB1_FZ_DBG_TIM14_STOP)
+#endif
+#if defined(DBGMCU_APB1_FZ_DBG_LPTIM1_STOP)
+#define __HAL_DBGMCU_FREEZE_LPTIM1()           SET_BIT(DBGMCU->APB1FZ1, DBGMCU_APB1_FZ_DBG_LPTIM1_STOP)
+#define __HAL_DBGMCU_UNFREEZE_LPTIM1()         CLEAR_BIT(DBGMCU->APB1FZ1, DBGMCU_APB1_FZ_DBG_LPTIM1_STOP)
+#endif
+#if defined(DBGMCU_APB1_FZ_DBG_WWDG1_STOP)
+#define __HAL_DBGMCU_FREEZE_WWDG1()           SET_BIT(DBGMCU->APB1FZ1, DBGMCU_APB1_FZ_DBG_WWDG1_STOP)
+#define __HAL_DBGMCU_UNFREEZE_WWDG1()         CLEAR_BIT(DBGMCU->APB1FZ1, DBGMCU_APB1_FZ_DBG_WWDG1_STOP)
+#endif
+#if defined(DBGMCU_APB1_FZ_DBG_I2C1_STOP)
+#define __HAL_DBGMCU_FREEZE_I2C1()           SET_BIT(DBGMCU->APB1FZ1, DBGMCU_APB1_FZ_DBG_I2C1_STOP)
+#define __HAL_DBGMCU_UNFREEZE_I2C1()         CLEAR_BIT(DBGMCU->APB1FZ1, DBGMCU_APB1_FZ_DBG_I2C1_STOP)
+#endif
+#if defined(DBGMCU_APB1_FZ_DBG_I2C2_STOP)
+#define __HAL_DBGMCU_FREEZE_I2C2()           SET_BIT(DBGMCU->APB1FZ1, DBGMCU_APB1_FZ_DBG_I2C2_STOP)
+#define __HAL_DBGMCU_UNFREEZE_I2C2()         CLEAR_BIT(DBGMCU->APB1FZ1, DBGMCU_APB1_FZ_DBG_I2C2_STOP)
+#endif
+#if defined(DBGMCU_APB1_FZ_DBG_I2C3_STOP)
+#define __HAL_DBGMCU_FREEZE_I2C3()           SET_BIT(DBGMCU->APB1FZ1, DBGMCU_APB1_FZ_DBG_I2C3_STOP)
+#define __HAL_DBGMCU_UNFREEZE_I2C3()         CLEAR_BIT(DBGMCU->APB1FZ1, DBGMCU_APB1_FZ_DBG_I2C3_STOP)
+#endif
+#if defined(DBGMCU_APB1_FZ_DBG_I2C5_STOP)
+#define __HAL_DBGMCU_FREEZE_I2C5()           SET_BIT(DBGMCU->APB1FZ1, DBGMCU_APB1_FZ_DBG_I2C5_STOP)
+#define __HAL_DBGMCU_UNFREEZE_I2C5()         CLEAR_BIT(DBGMCU->APB1FZ1, DBGMCU_APB1_FZ_DBG_I2C5_STOP)
+#endif
+
+#if defined(DBGMCU_APB2_FZ_DBG_TIM1_STOP)
+#define __HAL_DBGMCU_FREEZE_TIM1()           SET_BIT(DBGMCU->APB2FZ1, DBGMCU_APB2_FZ_DBG_TIM1_STOP)
+#define __HAL_DBGMCU_UNFREEZE_TIM1()         CLEAR_BIT(DBGMCU->APB2FZ1, DBGMCU_APB2_FZ_DBG_TIM1_STOP)
+#endif
+#if defined(DBGMCU_APB2_FZ_DBG_TIM8_STOP)
+#define __HAL_DBGMCU_FREEZE_TIM8()           SET_BIT(DBGMCU->APB2FZ1, DBGMCU_APB2_FZ_DBG_TIM8_STOP)
+#define __HAL_DBGMCU_UNFREEZE_TIM8()         CLEAR_BIT(DBGMCU->APB2FZ1, DBGMCU_APB2_FZ_DBG_TIM8_STOP)
+#endif
+#if defined(DBGMCU_APB2_FZ_DBG_TIM15_STOP)
+#define __HAL_DBGMCU_FREEZE_TIM15()           SET_BIT(DBGMCU->APB2FZ1, DBGMCU_APB2_FZ_DBG_TIM15_STOP)
+#define __HAL_DBGMCU_UNFREEZE_TIM15()         CLEAR_BIT(DBGMCU->APB2FZ1, DBGMCU_APB2_FZ_DBG_TIM15_STOP)
+#endif
+#if defined(DBGMCU_APB2_FZ_DBG_TIM16_STOP)
+#define __HAL_DBGMCU_FREEZE_TIM16()           SET_BIT(DBGMCU->APB2FZ1, DBGMCU_APB2_FZ_DBG_TIM16_STOP)
+#define __HAL_DBGMCU_UNFREEZE_TIM16()         CLEAR_BIT(DBGMCU->APB2FZ1, DBGMCU_APB2_FZ_DBG_TIM16_STOP)
+#endif
+#if defined(DBGMCU_APB2_FZ_DBG_TIM17_STOP)
+#define __HAL_DBGMCU_FREEZE_TIM17()           SET_BIT(DBGMCU->APB2FZ1, DBGMCU_APB2_FZ_DBG_TIM17_STOP)
+#define __HAL_DBGMCU_UNFREEZE_TIM17()         CLEAR_BIT(DBGMCU->APB2FZ1, DBGMCU_APB2_FZ_DBG_TIM17_STOP)
+#endif
+#if defined(DBGMCU_APB2_FZ_DBG_FDCAN_STOP)
+#define __HAL_DBGMCU_FREEZE_FDCAN()           SET_BIT(DBGMCU->APB2FZ1, DBGMCU_APB2_FZ_DBG_FDCAN_STOP)
+#define __HAL_DBGMCU_UNFREEZE_FDCAN()         CLEAR_BIT(DBGMCU->APB2FZ1, DBGMCU_APB2_FZ_DBG_FDCAN_STOP)
+#endif
+
+#if defined(DBGMCU_APB3_FZ_DBG_LPTIM2_STOP)
+#define __HAL_DBGMCU_FREEZE_LPTIM2()           SET_BIT(DBGMCU->APB3FZ1, DBGMCU_APB3_FZ_DBG_LPTIM2_STOP)
+#define __HAL_DBGMCU_UNFREEZE_LPTIM2()         CLEAR_BIT(DBGMCU->APB3FZ1, DBGMCU_APB3_FZ_DBG_LPTIM2_STOP)
+#endif
+#if defined(DBGMCU_APB3_FZ_DBG_LPTIM3_STOP)
+#define __HAL_DBGMCU_FREEZE_LPTIM3()           SET_BIT(DBGMCU->APB3FZ1, DBGMCU_APB3_FZ_DBG_LPTIM3_STOP)
+#define __HAL_DBGMCU_UNFREEZE_LPTIM3()         CLEAR_BIT(DBGMCU->APB3FZ1, DBGMCU_APB3_FZ_DBG_LPTIM3_STOP)
+#endif
+#if defined(DBGMCU_APB3_FZ_DBG_LPTIM4_STOP)
+#define __HAL_DBGMCU_FREEZE_LPTIM4()           SET_BIT(DBGMCU->APB3FZ1, DBGMCU_APB3_FZ_DBG_LPTIM4_STOP)
+#define __HAL_DBGMCU_UNFREEZE_LPTIM4()         CLEAR_BIT(DBGMCU->APB3FZ1, DBGMCU_APB3_FZ_DBG_LPTIM4_STOP)
+#endif
+#if defined(DBGMCU_APB3_FZ_DBG_LPTIM5_STOP)
+#define __HAL_DBGMCU_FREEZE_LPTIM5()           SET_BIT(DBGMCU->APB3FZ1, DBGMCU_APB3_FZ_DBG_LPTIM5_STOP)
+#define __HAL_DBGMCU_UNFREEZE_LPTIM5()         CLEAR_BIT(DBGMCU->APB3FZ1, DBGMCU_APB3_FZ_DBG_LPTIM5_STOP)
+#endif
+
+#if defined(DBGMCU_APB5_FZ_DBG_I2C4_STOP)
+#define __HAL_DBGMCU_FREEZE_I2C4()           SET_BIT(DBGMCU->APB5FZ1, DBGMCU_APB5_FZ_DBG_I2C4_STOP)
+#define __HAL_DBGMCU_UNFREEZE_I2C4()         CLEAR_BIT(DBGMCU->APB5FZ1, DBGMCU_APB5_FZ_DBG_I2C4_STOP)
+#endif
+#if defined(DBGMCU_APB5_FZ_DBG_IWDG1_STOP)
+#define __HAL_DBGMCU_FREEZE_IWDG1()           SET_BIT(DBGMCU->APB5FZ1, DBGMCU_APB5_FZ_DBG_IWDG1_STOP)
+#define __HAL_DBGMCU_UNFREEZE_IWDG1()         CLEAR_BIT(DBGMCU->APB5FZ1, DBGMCU_APB5_FZ_DBG_IWDG1_STOP)
+#endif
+#if defined(DBGMCU_APB5_FZ_DBG_RTC_STOP)
+#define __HAL_DBGMCU_FREEZE_RTC()           SET_BIT(DBGMCU->APB5FZ1, DBGMCU_APB5_FZ_DBG_RTC_STOP)
+#define __HAL_DBGMCU_UNFREEZE_RTC()         CLEAR_BIT(DBGMCU->APB5FZ1, DBGMCU_APB5_FZ_DBG_RTC_STOP)
+#endif
+#if defined(DBGMCU_APB5_FZ_DBG_I2C6_STOP)
+#define __HAL_DBGMCU_FREEZE_I2C6()           SET_BIT(DBGMCU->APB5FZ1, DBGMCU_APB5_FZ_DBG_I2C6_STOP)
+#define __HAL_DBGMCU_UNFREEZE_I2C6()         CLEAR_BIT(DBGMCU->APB5FZ1, DBGMCU_APB5_FZ_DBG_I2C6_STOP)
+#endif
+
+#endif
+
+/**
+   * @}
+   */
+
+/** @defgroup HDP_Exported_Macros HDP Exported Macros
+   * @{
+   */
+
+/** @addtogroup HDP_Enable
+  * @{
+  */
+#define __HAL_HDP_ENABLE()                                         SET_BIT(HDP->HDP_CTRL, HDP_CTRL_EN)
+/**
+  * @}
+  */
+
+
+
+/** @addtogroup HDP_Configure_SW_Programmable_Signals
+  * @{
+  */
+
+/** @brief  This macros allows atomic write of HDP_GPOVAL register
+            It uses HDP_GPOSET and HDP_GPOCLR regsiters to toogle
+  *
+  * @param  __HDP_SW_Signal__: specifies the sw signal bit to be written.
+  *          This parameter can be one of HDP_SW_SIGNAL_x(s) where x can be (0..7).
+  * @param  __HDP_SwSignalState__: specifies the value to be written to the selected bit.
+  *          This parameter can be one of the HDP_SwSignalState enum values:
+  *            @arg HDP_SW_SIGNAL_RESET: to clear the signal pin
+  *            @arg HDP_SW_SIGNAL_SET: to set the signal pin
+  */
+#define __HAL_HDP_ATOMIC_WRITE_GPOVAL(__HDP_SW_Signal__, __HDP_SwSignalState__)      \
+                              do {                                                                 \
+                                  if ((__HDP_SwSignalState__) != HDP_SW_SIGNAL_RESET)                                         \
+                                  {                                                                \
+                                    WRITE_REG(HDP->HDP_GPOSET, (uint8_t)(__HDP_SW_Signal__));            \
+                                  }                                                                \
+                                  else                                                             \
+                                  {                                                                \
+                                    WRITE_REG(HDP->HDP_GPOCLR, (uint8_t)(__HDP_SW_Signal__));            \
+                                  }                                                                \
+                              } while(0)
+
+/** @brief  This macros allows non-atomic write of HDP_GPOVAL register
+  *
+  * @param __GPOValue__: specifies the value to set in HDP_GPOVAL register
+  *
+  */
+#define __HAL_HDP_NON_ATOMIC_WRITE_GPOVAL(__GPOValue__)               WRITE_REG(HDP->HDP_GPOVAL, (uint8_t)(__GPOValue__))
+
+/** @brief  This macros returns value of HDP_GPOVAL register
+  *
+  * @retval the value to set in HDP_GPOVAL register
+  */
+#define __HAL_HDP_READ_GPOVAL()                                    READ_REG(HDP->HDP_GPOVAL)
+
+/**
+  * @}
+  */
+
+/** @addtogroup HDP0_MUX0_Config
+  * @{
+  */
+#define __HAL_HDP0_SELECT_PWR_PWRWAKE_SYS()                        MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX0, ((uint32_t) 0x00000000))
+#define __HAL_HDP0_SELECT_CM4_SLEEPDEEP()                          MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX0, ((uint32_t) HDP_MUX_MUX0_0))
+#define __HAL_HDP0_SELECT_PWR_STDBY_WKUP()                         MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX0, ((uint32_t) HDP_MUX_MUX0_1))
+#define __HAL_HDP0_SELECT_PWR_ENCOMP_VDDCORE()                     MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX0, ((uint32_t) HDP_MUX_MUX0_1 | HDP_MUX_MUX0_0))
+#define __HAL_HDP0_SELECT_BSEC_OUT_SEC_NIDEN()                     MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX0, ((uint32_t) HDP_MUX_MUX0_2))
+#define __HAL_HDP0_SELECT_RCC_CM4_SLEEPDEEP()                      MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX0, ((uint32_t) HDP_MUX_MUX0_2 | HDP_MUX_MUX0_1))
+#define __HAL_HDP0_SELECT_GPU_DBG7()                               MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX0, ((uint32_t) HDP_MUX_MUX0_2 | HDP_MUX_MUX0_1 | HDP_MUX_MUX0_0))
+#define __HAL_HDP0_SELECT_DDRCTRL_IP_REQ()                         MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX0, ((uint32_t) HDP_MUX_MUX0_3))
+#define __HAL_HDP0_SELECT_PWR_DDR_RET_ENABLE_N()                   MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX0, ((uint32_t) HDP_MUX_MUX0_3 | HDP_MUX_MUX0_0))
+#define __HAL_HDP0_SELECT_GPOVAL_0()                               MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX0, ((uint32_t) HDP_MUX_MUX0_3 | HDP_MUX_MUX0_2 | HDP_MUX_MUX0_1 | HDP_MUX_MUX0_0))
+
+/**
+  * @}
+  */
+
+/** @addtogroup HDP1_MUX1_Config
+  * @{
+  */
+#define __HAL_HDP1_SELECT_PWR_PWRWAKE_MCU()                        MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX1, ((uint32_t) 0x00000000))
+#define __HAL_HDP1_SELECT_CM4_HALTED()                             MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX1, ((uint32_t) HDP_MUX_MUX1_0))
+#define __HAL_HDP1_SELECT_CA7_nAXIERRIRQ()                         MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX1, ((uint32_t) HDP_MUX_MUX1_1))
+#define __HAL_HDP1_SELECT_PWR_OKIN_MR()                            MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX1, ((uint32_t) HDP_MUX_MUX1_1 | HDP_MUX_MUX1_0))
+#define __HAL_HDP1_SELECT_BSEC_OUT_SEC_DBGEN()                     MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX1, ((uint32_t) HDP_MUX_MUX1_2))
+#define __HAL_HDP1_SELECT_EXTI_SYS_WAKEUP()                        MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX1, ((uint32_t) HDP_MUX_MUX1_2 | HDP_MUX_MUX1_0))
+#define __HAL_HDP1_SELECT_RCC_PWRDS_MPU()                          MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX1, ((uint32_t) HDP_MUX_MUX1_2 | HDP_MUX_MUX1_1))
+#define __HAL_HDP1_SELECT_GPU_DBG6()                               MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX1, ((uint32_t) HDP_MUX_MUX1_2 | HDP_MUX_MUX1_1 | HDP_MUX_MUX1_0))
+#define __HAL_HDP1_SELECT_DDRCTRL_DFI_CTRLUPD_REQ()                MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX1, ((uint32_t) HDP_MUX_MUX1_3))
+#define __HAL_HDP1_SELECT_DDRCTRL_CACTIVE_DDRC_ASR()               MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX1, ((uint32_t) HDP_MUX_MUX1_3 | HDP_MUX_MUX1_0))
+#define __HAL_HDP1_SELECT_GPOVAL_1()                               MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX1, ((uint32_t) HDP_MUX_MUX1_3 | HDP_MUX_MUX1_2 | HDP_MUX_MUX1_1 | HDP_MUX_MUX1_0))
+
+/**
+  * @}
+  */
+
+/** @addtogroup HDP2_MUX2_Config
+  * @{
+  */
+#define __HAL_HDP2_SELECT_PWR_PWRWAKE_MPU()                        MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX2, ((uint32_t) 0x00000000))
+#define __HAL_HDP2_SELECT_CM4_RXEV()                               MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX2, ((uint32_t) HDP_MUX_MUX2_0))
+#define __HAL_HDP2_SELECT_CA7_nPMUIRQ1()                           MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX2, ((uint32_t) HDP_MUX_MUX2_1))
+#define __HAL_HDP2_SELECT_CA7_nFIQOUT1()                           MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX2, ((uint32_t) HDP_MUX_MUX2_1 | HDP_MUX_MUX2_0))
+#define __HAL_HDP2_SELECT_BSEC_IN_RSTCORE_n()                      MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX2, ((uint32_t) HDP_MUX_MUX2_2))
+#define __HAL_HDP2_SELECT_EXTI_C2_WAKEUP()                         MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX2, ((uint32_t) HDP_MUX_MUX2_2 | HDP_MUX_MUX2_0))
+#define __HAL_HDP2_SELECT_RCC_PWRDS_MCU()                          MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX2, ((uint32_t) HDP_MUX_MUX2_2 | HDP_MUX_MUX2_1))
+#define __HAL_HDP2_SELECT_GPU_DBG5()                               MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX2, ((uint32_t) HDP_MUX_MUX2_2 | HDP_MUX_MUX2_1 | HDP_MUX_MUX2_0))
+#define __HAL_HDP2_SELECT_DDRCTRL_DFI_INIT_COMPLETE()              MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX2, ((uint32_t) HDP_MUX_MUX2_3))
+#define __HAL_HDP2_SELECT_DDRCTRL_PERF_OP_IS_REFRESH()             MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX2, ((uint32_t) HDP_MUX_MUX2_3 | HDP_MUX_MUX2_0))
+#define __HAL_HDP2_SELECT_DDRCTRL_GSKP_DFI_LP_REQ()                MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX2, ((uint32_t) HDP_MUX_MUX2_3 | HDP_MUX_MUX2_1))
+#define __HAL_HDP2_SELECT_GPOVAL_2()                               MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX2, ((uint32_t) HDP_MUX_MUX2_3 | HDP_MUX_MUX2_2 | HDP_MUX_MUX2_1 | HDP_MUX_MUX2_0))
+
+/**
+  * @}
+  */
+
+/** @addtogroup HDP3_MUX3_Config
+  * @{
+  */
+#define __HAL_HDP3_SELECT_PWR_SEL_VTH_VDD_CORE()                   MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX3, ((uint32_t) 0x00000000))
+#define __HAL_HDP3_SELECT_CM4_TXEV()                               MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX3, ((uint32_t) HDP_MUX_MUX3_0))
+#define __HAL_HDP3_SELECT_CA7_nPMUIRQ0()                           MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX3, ((uint32_t) HDP_MUX_MUX3_1))
+#define __HAL_HDP3_SELECT_CA7_nFIQOUT0()                           MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX3, ((uint32_t) HDP_MUX_MUX3_1 | HDP_MUX_MUX3_0))
+#define __HAL_HDP3_SELECT_BSEC_OUT_SEC_DFTLOCK()                   MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX3, ((uint32_t) HDP_MUX_MUX3_2))
+#define __HAL_HDP3_SELECT_EXTI_C1_WAKEUP()                         MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX3, ((uint32_t) HDP_MUX_MUX3_2 | HDP_MUX_MUX3_0))
+#define __HAL_HDP3_SELECT_RCC_PWRDS_SYS()                          MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX3, ((uint32_t) HDP_MUX_MUX3_2 | HDP_MUX_MUX3_1))
+#define __HAL_HDP3_SELECT_GPU_DBG4()                               MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX3, ((uint32_t) HDP_MUX_MUX3_2 | HDP_MUX_MUX3_1 | HDP_MUX_MUX3_0))
+#define __HAL_HDP3_SELECT_DDRCTRL_STAT_DDRC_REG_SELREF_TYPE_0()    MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX3, ((uint32_t) HDP_MUX_MUX3_3))
+#define __HAL_HDP3_SELECT_DDRCTRL_CACTIVE_1()                      MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX3, ((uint32_t) HDP_MUX_MUX3_3 | HDP_MUX_MUX3_0))
+#define __HAL_HDP3_SELECT_GPOVAL_3()                               MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX3, ((uint32_t) HDP_MUX_MUX3_3 | HDP_MUX_MUX3_2 | HDP_MUX_MUX3_1 | HDP_MUX_MUX3_0))
+
+/**
+  * @}
+  */
+
+/** @addtogroup HDP4_MUX4_Config
+  * @{
+  */
+#define __HAL_HDP4_SELECT_PWR_MPUCR()                              MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX4, ((uint32_t) 0x00000000))
+#define __HAL_HDP4_SELECT_CM4_SLEEPING()                           MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX4, ((uint32_t) HDP_MUX_MUX4_0))
+#define __HAL_HDP4_SELECT_CA7_nRESET1()                            MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX4, ((uint32_t) HDP_MUX_MUX4_1))
+#define __HAL_HDP4_SELECT_CA7_nIRQOUT1()                           MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX4, ((uint32_t) HDP_MUX_MUX4_1 | HDP_MUX_MUX4_0))
+#define __HAL_HDP4_SELECT_BSEC_OUT_SEC_DFTEN()                     MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX4, ((uint32_t) HDP_MUX_MUX4_2))
+#define __HAL_HDP4_SELECT_BSEC_OUT_SEC_DBGSWENABLE()               MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX4, ((uint32_t) HDP_MUX_MUX4_2 | HDP_MUX_MUX4_0))
+#define __HAL_HDP4_SELECT_ETH_OUT_PMT_INTR_0()                     MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX4, ((uint32_t) HDP_MUX_MUX4_2 | HDP_MUX_MUX4_1))
+#define __HAL_HDP4_SELECT_GPU_DBG3()                               MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX4, ((uint32_t) HDP_MUX_MUX4_2 | HDP_MUX_MUX4_1 | HDP_MUX_MUX4_0))
+#define __HAL_HDP4_SELECT_DDRCTRL_STAT_DDRC_REG_SELREF_TYPE_1()    MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX4, ((uint32_t) HDP_MUX_MUX4_3))
+#define __HAL_HDP4_SELECT_DDRCTRL_CACTIVE_0()                      MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX4, ((uint32_t) HDP_MUX_MUX4_3 | HDP_MUX_MUX4_0))
+#define __HAL_HDP4_SELECT_GPOVAL_4()                               MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX4, ((uint32_t) HDP_MUX_MUX4_3 | HDP_MUX_MUX4_2 | HDP_MUX_MUX4_1 | HDP_MUX_MUX4_0))
+
+/**
+  * @}
+  */
+
+/** @addtogroup HDP5_MUX5_Config
+  * @{
+  */
+#define __HAL_HDP5_SELECT_CA7_STANDBYWFIL2()                       MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX5, ((uint32_t) 0x00000000))
+#define __HAL_HDP5_SELECT_PWR_VTH_VDDCORE_ACK()                    MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX5, ((uint32_t) HDP_MUX_MUX5_0))
+#define __HAL_HDP5_SELECT_CA7_nRESET0()                            MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX5, ((uint32_t) HDP_MUX_MUX5_1))
+#define __HAL_HDP5_SELECT_CA7_nIRQOUT0()                           MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX5, ((uint32_t) HDP_MUX_MUX5_1 | HDP_MUX_MUX5_0))
+#define __HAL_HDP5_SELECT_BSEC_IN_PWROK()                          MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX5, ((uint32_t) HDP_MUX_MUX5_2))
+#define __HAL_HDP5_SELECT_BSEC_OUT_SEC_DEVICEEN()                  MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX5, ((uint32_t) HDP_MUX_MUX5_2 | HDP_MUX_MUX5_0))
+#define __HAL_HDP5_SELECT_ETH_OUT_LPI_INTR_0()                     MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX5, ((uint32_t) HDP_MUX_MUX5_2 | HDP_MUX_MUX5_1))
+#define __HAL_HDP5_SELECT_GPU_DBG2()                               MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX5, ((uint32_t) HDP_MUX_MUX5_2 | HDP_MUX_MUX5_1 | HDP_MUX_MUX5_0))
+#define __HAL_HDP5_SELECT_DDRCTRL_CACTIVE_DDRC()                   MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX5, ((uint32_t) HDP_MUX_MUX5_3))
+#define __HAL_HDP5_SELECT_DDRCTRL_WR_CREDIT_CNT_4_0()              MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX5, ((uint32_t) HDP_MUX_MUX5_3 | HDP_MUX_MUX5_0)))
+#define __HAL_HDP5_SELECT_GPOVAL_5()                               MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX5, ((uint32_t) HDP_MUX_MUX5_3 | HDP_MUX_MUX5_2 | HDP_MUX_MUX5_1 | HDP_MUX_MUX5_0))
+/**
+  * @}
+  */
+
+/** @addtogroup HDP6_MUX6_Config
+  * @{
+  */
+#define __HAL_HDP6_SELECT_CA7_STANDBYWFI1()                        MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX6, ((uint32_t) 0x00000000))
+#define __HAL_HDP6_SELECT_CA7_STANDBYWFE1()                        MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX6, ((uint32_t) HDP_MUX_MUX6_0))
+#define __HAL_HDP6_SELECT_CA7_EVENTO()                             MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX6, ((uint32_t) HDP_MUX_MUX6_1))
+#define __HAL_HDP6_SELECT_CA7_DBGACK1()                            MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX6, ((uint32_t) HDP_MUX_MUX6_1 | HDP_MUX_MUX6_0))
+#define __HAL_HDP6_SELECT_BSEC_OUT_SEC_SPNIDEN()                   MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX6, ((uint32_t) HDP_MUX_MUX6_2 | HDP_MUX_MUX6_0))
+#define __HAL_HDP6_SELECT_ETH_OUT_MAC_SPEED_O1()                   MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX6, ((uint32_t) HDP_MUX_MUX6_2 | HDP_MUX_MUX6_1))
+#define __HAL_HDP6_SELECT_GPU_DBG1()                               MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX6, ((uint32_t) HDP_MUX_MUX6_2 | HDP_MUX_MUX6_1 | HDP_MUX_MUX6_0))
+#define __HAL_HDP6_SELECT_DDRCTRL_CSYSACK_DDRC()                   MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX6, ((uint32_t) HDP_MUX_MUX6_3))
+#define __HAL_HDP6_SELECT_DDRCTRL_LPR_CREDIT_CNT_4_0()             MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX6, ((uint32_t) HDP_MUX_MUX6_3 | HDP_MUX_MUX6_0))
+#define __HAL_HDP6_SELECT_GPOVAL_6()                               MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX6, ((uint32_t) HDP_MUX_MUX6_3 | HDP_MUX_MUX6_2 | HDP_MUX_MUX6_1 | HDP_MUX_MUX6_0))
+
+/**
+  * @}
+  */
+
+/** @addtogroup HDP7_MUX7_Config
+  * @{
+  */
+#define __HAL_HDP7_SELECT_CA7_STANDBYWFI0()                        MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX7, ((uint32_t) 0x00000000))
+#define __HAL_HDP7_SELECT_CA7_STANDBYWFE0()                        MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX7, ((uint32_t) HDP_MUX_MUX7_0))
+#define __HAL_HDP7_SELECT_CA7_DBGACK0()                            MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX7, ((uint32_t) HDP_MUX_MUX7_1 | HDP_MUX_MUX7_0))
+#define __HAL_HDP7_SELECT_BSEC_OUT_FUSE_OK()                       MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX7, ((uint32_t) HDP_MUX_MUX7_2))
+#define __HAL_HDP7_SELECT_BSEC_OUT_SEC_SPIDEN()                    MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX7, ((uint32_t) HDP_MUX_MUX7_2 | HDP_MUX_MUX7_0))
+#define __HAL_HDP7_SELECT_ETH_OUT_MAC_SPEED_O0()                   MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX7, ((uint32_t) HDP_MUX_MUX7_2 | HDP_MUX_MUX7_1))
+#define __HAL_HDP7_SELECT_GPU_DBG0()                               MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX7, ((uint32_t) HDP_MUX_MUX7_2 | HDP_MUX_MUX7_1 | HDP_MUX_MUX7_0))
+#define __HAL_HDP7_SELECT_DDRCTRL_CSYSREQ_DDRC()                   MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX7, ((uint32_t) HDP_MUX_MUX7_3))
+#define __HAL_HDP7_SELECT_DDRCTRL_HPR_CREDIT_CNT_4_0()             MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX7, ((uint32_t) HDP_MUX_MUX7_3 | HDP_MUX_MUX7_0))
+#define __HAL_HDP7_SELECT_GPOVAL_7()                               MODIFY_REG(HDP->HDP_MUX, HDP_MUX_MUX7, ((uint32_t) HDP_MUX_MUX7_3 | HDP_MUX_MUX7_2 | HDP_MUX_MUX7_1 | HDP_MUX_MUX7_0))
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+
+/** @defgroup HAL_Private_Macros HAL Private Macros
+  * @{
+  */
+#define IS_TICKFREQ(FREQ) (((FREQ) == HAL_TICK_FREQ_10HZ)  || \
+                           ((FREQ) == HAL_TICK_FREQ_100HZ) || \
+                           ((FREQ) == HAL_TICK_FREQ_1KHZ))
+/**
+  * @}
+  */
+
+/* Exported variables --------------------------------------------------------*/
+
+/** @addtogroup HAL_Exported_Variables
+  * @{
+  */
+extern __IO uint32_t uwTick;
+extern uint32_t uwTickPrio;
+extern HAL_TickFreqTypeDef uwTickFreq;
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup HAL_Exported_Functions HAL Exported Functions
+  * @{
+  */
+  
+/* Initialization and de-initialization functions  ******************************/
+/** @defgroup HAL_Exported_Functions_Group1 Initialization and de-initialization functions
+  * @{
+  */
+HAL_StatusTypeDef HAL_Init(void);
+HAL_StatusTypeDef HAL_DeInit(void);
+void HAL_MspInit(void);
+void HAL_MspDeInit(void);
+HAL_StatusTypeDef HAL_InitTick (uint32_t TickPriority);
+
+void HAL_EnableDBGWakeUp(void);
+void HAL_DisableDBGWakeUp(void);
+/**
+  * @}
+  */
+  
+/* Peripheral Control functions  ************************************************/
+/** @defgroup HAL_Exported_Functions_Group2 Peripheral Control functions
+  * @{
+  */
+void HAL_IncTick(void);
+void HAL_Delay(uint32_t Delay);
+uint32_t HAL_GetTick(void);
+uint32_t HAL_GetTickPrio(void);
+HAL_StatusTypeDef HAL_SetTickFreq(HAL_TickFreqTypeDef Freq);
+HAL_TickFreqTypeDef HAL_GetTickFreq(void);
+void HAL_SuspendTick(void);
+void HAL_ResumeTick(void);
+uint32_t HAL_GetHalVersion(void);
+uint32_t HAL_GetREVID(void);
+uint32_t HAL_GetDEVID(void);
+uint32_t HAL_GetUIDw0(void);
+uint32_t HAL_GetUIDw1(void);
+uint32_t HAL_GetUIDw2(void);
+void HAL_SYSCFG_ETHInterfaceSelect(uint32_t SYSCFG_ETHInterface);
+void HAL_SYSCFG_AnalogSwitchConfig(uint32_t SYSCFG_AnalogSwitch , uint32_t SYSCFG_SwitchState );
+void HAL_SYSCFG_EnableBOOST(void);
+void HAL_SYSCFG_DisableBOOST(void);
+void HAL_EnableCompensationCell(void);
+void HAL_DisableCompensationCell(void);
+void HAL_SYSCFG_EnableIOSpeedOptimize(uint32_t SYSCFG_HighSpeedSignal);
+void HAL_SYSCFG_DisableIOSpeedOptimize(uint32_t SYSCFG_HighSpeedSignal);
+void HAL_SYSCFG_CompensationCodeSelect(uint32_t SYSCFG_CompCode);
+void HAL_SYSCFG_CompensationCodeConfig(uint32_t SYSCFG_PMOSCode, uint32_t SYSCFG_NMOSCode);
+HAL_StatusTypeDef HAL_SYSCFG_EnableIOCompensation(void);
+void HAL_SYSCFG_DisableIOCompensation(void);
+void HAL_EnableDBGSleepMode(void);
+void HAL_DisableDBGSleepMode(void);
+void HAL_EnableDBGStopMode(void);
+void HAL_DisableDBGStopMode(void);
+void HAL_EnableDBGStandbyMode(void);
+void HAL_DisableDBGStandbyMode(void);
+void HAL_EnableDBGWakeUp(void);
+void HAL_DisableDBGWakeUp(void);
+void HAL_SYSCFG_VREFBUF_VoltageScalingConfig(uint32_t VoltageScaling);
+void HAL_SYSCFG_VREFBUF_HighImpedanceConfig(uint32_t Mode);
+void HAL_SYSCFG_VREFBUF_TrimmingConfig(uint32_t TrimmingValue);
+HAL_StatusTypeDef HAL_SYSCFG_EnableVREFBUF(void);
+void HAL_SYSCFG_DisableVREFBUF(void);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+ 
+/**
+ * @}
+ */
+  
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32MP1xx_HAL_H */

meta-st/meta-st-stm32mp-addons/mx/stm32mp157d-vrpmdv-mon-mx/Drivers/STM32MP1xx_HAL_Driver/Inc/stm32mp1xx_hal_cortex.h

@@ -0,0 +1,437 @@
+/**
+  ******************************************************************************
+  * @file    stm32mp1xx_hal_cortex.h
+  * @author  MCD Application Team
+  * @brief   Header file of CORTEX HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32MP1xx_HAL_CORTEX_H
+#define __STM32MP1xx_HAL_CORTEX_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32mp1xx_hal_def.h"
+
+/** @addtogroup STM32MP1xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup CORTEX
+  * @{
+  */
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup CORTEX_Exported_Types Cortex Exported Types
+  * @{
+  */
+
+#if (__MPU_PRESENT == 1)
+/** @defgroup CORTEX_MPU_Region_Initialization_Structure_definition MPU Region Initialization Structure Definition
+  * @brief  MPU Region initialization structure
+  * @{
+  */
+typedef struct
+{
+  uint8_t                Enable;                /*!< Specifies the status of the region.
+                                                     This parameter can be a value of @ref CORTEX_MPU_Region_Enable                 */
+  uint8_t                Number;                /*!< Specifies the number of the region to protect.
+                                                     This parameter can be a value of @ref CORTEX_MPU_Region_Number                 */
+  uint32_t               BaseAddress;           /*!< Specifies the base address of the region to protect.                           */
+  uint8_t                Size;                  /*!< Specifies the size of the region to protect.
+                                                     This parameter can be a value of @ref CORTEX_MPU_Region_Size                   */
+  uint8_t                SubRegionDisable;      /*!< Specifies the number of the subregion protection to disable.
+                                                     This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF    */
+  uint8_t                TypeExtField;          /*!< Specifies the TEX field level.
+                                                     This parameter can be a value of @ref CORTEX_MPU_TEX_Levels                    */
+  uint8_t                AccessPermission;      /*!< Specifies the region access permission type.
+                                                     This parameter can be a value of @ref CORTEX_MPU_Region_Permission_Attributes  */
+  uint8_t                DisableExec;           /*!< Specifies the instruction access status.
+                                                     This parameter can be a value of @ref CORTEX_MPU_Instruction_Access            */
+  uint8_t                IsShareable;           /*!< Specifies the shareability status of the protected region.
+                                                     This parameter can be a value of @ref CORTEX_MPU_Access_Shareable              */
+  uint8_t                IsCacheable;           /*!< Specifies the cacheable status of the region protected.
+                                                     This parameter can be a value of @ref CORTEX_MPU_Access_Cacheable              */
+  uint8_t                IsBufferable;          /*!< Specifies the bufferable status of the protected region.
+                                                     This parameter can be a value of @ref CORTEX_MPU_Access_Bufferable             */
+} MPU_Region_InitTypeDef;
+/**
+  * @}
+  */
+#endif /* __MPU_PRESENT */
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup CORTEX_Exported_Constants CORTEX Exported Constants
+  * @{
+  */
+
+/** @defgroup CORTEX_Preemption_Priority_Group CORTEX Preemption Priority Group
+  * @{
+  */
+#define NVIC_PRIORITYGROUP_0         ((uint32_t)0x00000007) /*!< 0 bits for pre-emption priority
+                                                                 4 bits for subpriority */
+#define NVIC_PRIORITYGROUP_1         ((uint32_t)0x00000006) /*!< 1 bits for pre-emption priority
+                                                                 3 bits for subpriority */
+#define NVIC_PRIORITYGROUP_2         ((uint32_t)0x00000005) /*!< 2 bits for pre-emption priority
+                                                                 2 bits for subpriority */
+#define NVIC_PRIORITYGROUP_3         ((uint32_t)0x00000004) /*!< 3 bits for pre-emption priority
+                                                                 1 bits for subpriority */
+#define NVIC_PRIORITYGROUP_4         ((uint32_t)0x00000003) /*!< 4 bits for pre-emption priority
+                                                                 0 bits for subpriority */
+/**
+  * @}
+  */
+
+#if (__MPU_PRESENT == 1)
+/** @defgroup CORTEX_MPU_HFNMI_PRIVDEF_Control MPU HFNMI and PRIVILEGED Access control
+  * @{
+  */
+#define  MPU_HFNMI_PRIVDEF_NONE      ((uint32_t)0x00000000)
+#define  MPU_HARDFAULT_NMI           ((uint32_t)0x00000002)
+#define  MPU_PRIVILEGED_DEFAULT      ((uint32_t)0x00000004)
+#define  MPU_HFNMI_PRIVDEF           ((uint32_t)0x00000006)
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_MPU_Region_Enable CORTEX MPU Region Enable
+  * @{
+  */
+#define  MPU_REGION_ENABLE     ((uint8_t)0x01)
+#define  MPU_REGION_DISABLE    ((uint8_t)0x00)
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_MPU_Instruction_Access CORTEX MPU Instruction Access
+  * @{
+  */
+#define  MPU_INSTRUCTION_ACCESS_ENABLE      ((uint8_t)0x00)
+#define  MPU_INSTRUCTION_ACCESS_DISABLE     ((uint8_t)0x01)
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_MPU_Access_Shareable CORTEX MPU Instruction Access Shareable
+  * @{
+  */
+#define  MPU_ACCESS_SHAREABLE        ((uint8_t)0x01)
+#define  MPU_ACCESS_NOT_SHAREABLE    ((uint8_t)0x00)
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_MPU_Access_Cacheable CORTEX MPU Instruction Access Cacheable
+  * @{
+  */
+#define  MPU_ACCESS_CACHEABLE         ((uint8_t)0x01)
+#define  MPU_ACCESS_NOT_CACHEABLE     ((uint8_t)0x00)
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_MPU_Access_Bufferable CORTEX MPU Instruction Access Bufferable
+  * @{
+  */
+#define  MPU_ACCESS_BUFFERABLE         ((uint8_t)0x01)
+#define  MPU_ACCESS_NOT_BUFFERABLE     ((uint8_t)0x00)
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_MPU_TEX_Levels MPU TEX Levels
+  * @{
+  */
+#define  MPU_TEX_LEVEL0    ((uint8_t)0x00)
+#define  MPU_TEX_LEVEL1    ((uint8_t)0x01)
+#define  MPU_TEX_LEVEL2    ((uint8_t)0x02)
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_MPU_Region_Size CORTEX MPU Region Size
+  * @{
+  */
+#define   MPU_REGION_SIZE_32B      ((uint8_t)0x04)
+#define   MPU_REGION_SIZE_64B      ((uint8_t)0x05)
+#define   MPU_REGION_SIZE_128B     ((uint8_t)0x06)
+#define   MPU_REGION_SIZE_256B     ((uint8_t)0x07)
+#define   MPU_REGION_SIZE_512B     ((uint8_t)0x08)
+#define   MPU_REGION_SIZE_1KB      ((uint8_t)0x09)
+#define   MPU_REGION_SIZE_2KB      ((uint8_t)0x0A)
+#define   MPU_REGION_SIZE_4KB      ((uint8_t)0x0B)
+#define   MPU_REGION_SIZE_8KB      ((uint8_t)0x0C)
+#define   MPU_REGION_SIZE_16KB     ((uint8_t)0x0D)
+#define   MPU_REGION_SIZE_32KB     ((uint8_t)0x0E)
+#define   MPU_REGION_SIZE_64KB     ((uint8_t)0x0F)
+#define   MPU_REGION_SIZE_128KB    ((uint8_t)0x10)
+#define   MPU_REGION_SIZE_256KB    ((uint8_t)0x11)
+#define   MPU_REGION_SIZE_512KB    ((uint8_t)0x12)
+#define   MPU_REGION_SIZE_1MB      ((uint8_t)0x13)
+#define   MPU_REGION_SIZE_2MB      ((uint8_t)0x14)
+#define   MPU_REGION_SIZE_4MB      ((uint8_t)0x15)
+#define   MPU_REGION_SIZE_8MB      ((uint8_t)0x16)
+#define   MPU_REGION_SIZE_16MB     ((uint8_t)0x17)
+#define   MPU_REGION_SIZE_32MB     ((uint8_t)0x18)
+#define   MPU_REGION_SIZE_64MB     ((uint8_t)0x19)
+#define   MPU_REGION_SIZE_128MB    ((uint8_t)0x1A)
+#define   MPU_REGION_SIZE_256MB    ((uint8_t)0x1B)
+#define   MPU_REGION_SIZE_512MB    ((uint8_t)0x1C)
+#define   MPU_REGION_SIZE_1GB      ((uint8_t)0x1D)
+#define   MPU_REGION_SIZE_2GB      ((uint8_t)0x1E)
+#define   MPU_REGION_SIZE_4GB      ((uint8_t)0x1F)
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_MPU_Region_Permission_Attributes CORTEX MPU Region Permission Attributes
+  * @{
+  */
+#define  MPU_REGION_NO_ACCESS      ((uint8_t)0x00)
+#define  MPU_REGION_PRIV_RW        ((uint8_t)0x01)
+#define  MPU_REGION_PRIV_RW_URO    ((uint8_t)0x02)
+#define  MPU_REGION_FULL_ACCESS    ((uint8_t)0x03)
+#define  MPU_REGION_PRIV_RO        ((uint8_t)0x05)
+#define  MPU_REGION_PRIV_RO_URO    ((uint8_t)0x06)
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_MPU_Region_Number CORTEX MPU Region Number
+  * @{
+  */
+#define  MPU_REGION_NUMBER0    ((uint8_t)0x00)
+#define  MPU_REGION_NUMBER1    ((uint8_t)0x01)
+#define  MPU_REGION_NUMBER2    ((uint8_t)0x02)
+#define  MPU_REGION_NUMBER3    ((uint8_t)0x03)
+#define  MPU_REGION_NUMBER4    ((uint8_t)0x04)
+#define  MPU_REGION_NUMBER5    ((uint8_t)0x05)
+#define  MPU_REGION_NUMBER6    ((uint8_t)0x06)
+#define  MPU_REGION_NUMBER7    ((uint8_t)0x07)
+/**
+  * @}
+  */
+#endif /* __MPU_PRESENT */
+
+/**
+  * @}
+  */
+
+
+/* Exported Macros -----------------------------------------------------------*/
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup CORTEX_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup CORTEX_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization and de-initialization functions *****************************/
+void HAL_NVIC_SetPriorityGrouping(uint32_t PriorityGroup);
+void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority);
+void HAL_NVIC_EnableIRQ(IRQn_Type IRQn);
+void HAL_NVIC_DisableIRQ(IRQn_Type IRQn);
+void HAL_NVIC_SystemReset(void);
+uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb);
+/**
+  * @}
+  */
+
+/** @addtogroup CORTEX_Exported_Functions_Group2
+ * @{
+ */
+/* Peripheral Control functions ***********************************************/
+#if (__MPU_PRESENT == 1)
+void HAL_MPU_ConfigRegion(MPU_Region_InitTypeDef *MPU_Init);
+#endif /* __MPU_PRESENT */
+uint32_t HAL_NVIC_GetPriorityGrouping(void);
+void HAL_NVIC_GetPriority(IRQn_Type IRQn, uint32_t PriorityGroup, uint32_t *pPreemptPriority, uint32_t *pSubPriority);
+uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn);
+void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn);
+void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn);
+uint32_t HAL_NVIC_GetActive(IRQn_Type IRQn);
+void HAL_SYSTICK_IRQHandler(void);
+void HAL_SYSTICK_Callback(void);
+
+
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup CORTEX_Private_Macros CORTEX Private Macros
+  * @{
+  */
+#define IS_NVIC_PRIORITY_GROUP(GROUP) (((GROUP) == NVIC_PRIORITYGROUP_0) || \
+                                       ((GROUP) == NVIC_PRIORITYGROUP_1) || \
+                                       ((GROUP) == NVIC_PRIORITYGROUP_2) || \
+                                       ((GROUP) == NVIC_PRIORITYGROUP_3) || \
+                                       ((GROUP) == NVIC_PRIORITYGROUP_4))
+
+#define IS_NVIC_PREEMPTION_PRIORITY(PRIORITY)  ((PRIORITY) < 0x10)
+
+#define IS_NVIC_SUB_PRIORITY(PRIORITY)         ((PRIORITY) < 0x10)
+
+#define IS_NVIC_DEVICE_IRQ(IRQ)                ((IRQ) >= 0x00)
+
+#define IS_SYSTICK_CLK_SOURCE(SOURCE) (((SOURCE) == SYSTICK_CLKSOURCE_HCLK) || \
+                                       ((SOURCE) == SYSTICK_CLKSOURCE_HCLK_DIV8))
+
+#if (__MPU_PRESENT == 1)
+#define IS_MPU_REGION_ENABLE(STATE) (((STATE) == MPU_REGION_ENABLE) || \
+                                     ((STATE) == MPU_REGION_DISABLE))
+
+#define IS_MPU_INSTRUCTION_ACCESS(STATE) (((STATE) == MPU_INSTRUCTION_ACCESS_ENABLE) || \
+                                          ((STATE) == MPU_INSTRUCTION_ACCESS_DISABLE))
+
+#define IS_MPU_ACCESS_SHAREABLE(STATE)   (((STATE) == MPU_ACCESS_SHAREABLE) || \
+                                          ((STATE) == MPU_ACCESS_NOT_SHAREABLE))
+
+#define IS_MPU_ACCESS_CACHEABLE(STATE)   (((STATE) == MPU_ACCESS_CACHEABLE) || \
+                                          ((STATE) == MPU_ACCESS_NOT_CACHEABLE))
+
+#define IS_MPU_ACCESS_BUFFERABLE(STATE)   (((STATE) == MPU_ACCESS_BUFFERABLE) || \
+                                          ((STATE) == MPU_ACCESS_NOT_BUFFERABLE))
+
+#define IS_MPU_TEX_LEVEL(TYPE) (((TYPE) == MPU_TEX_LEVEL0)  || \
+                                ((TYPE) == MPU_TEX_LEVEL1)  || \
+                                ((TYPE) == MPU_TEX_LEVEL2))
+
+#define IS_MPU_REGION_PERMISSION_ATTRIBUTE(TYPE) (((TYPE) == MPU_REGION_NO_ACCESS)   || \
+                                                  ((TYPE) == MPU_REGION_PRIV_RW)     || \
+                                                  ((TYPE) == MPU_REGION_PRIV_RW_URO) || \
+                                                  ((TYPE) == MPU_REGION_FULL_ACCESS) || \
+                                                  ((TYPE) == MPU_REGION_PRIV_RO)     || \
+                                                  ((TYPE) == MPU_REGION_PRIV_RO_URO))
+
+#define IS_MPU_REGION_NUMBER(NUMBER)    (((NUMBER) == MPU_REGION_NUMBER0) || \
+                                         ((NUMBER) == MPU_REGION_NUMBER1) || \
+                                         ((NUMBER) == MPU_REGION_NUMBER2) || \
+                                         ((NUMBER) == MPU_REGION_NUMBER3) || \
+                                         ((NUMBER) == MPU_REGION_NUMBER4) || \
+                                         ((NUMBER) == MPU_REGION_NUMBER5) || \
+                                         ((NUMBER) == MPU_REGION_NUMBER6) || \
+                                         ((NUMBER) == MPU_REGION_NUMBER7))
+
+#define IS_MPU_REGION_SIZE(SIZE)    (((SIZE) == MPU_REGION_SIZE_32B)   || \
+                                     ((SIZE) == MPU_REGION_SIZE_64B)   || \
+                                     ((SIZE) == MPU_REGION_SIZE_128B)  || \
+                                     ((SIZE) == MPU_REGION_SIZE_256B)  || \
+                                     ((SIZE) == MPU_REGION_SIZE_512B)  || \
+                                     ((SIZE) == MPU_REGION_SIZE_1KB)   || \
+                                     ((SIZE) == MPU_REGION_SIZE_2KB)   || \
+                                     ((SIZE) == MPU_REGION_SIZE_4KB)   || \
+                                     ((SIZE) == MPU_REGION_SIZE_8KB)   || \
+                                     ((SIZE) == MPU_REGION_SIZE_16KB)  || \
+                                     ((SIZE) == MPU_REGION_SIZE_32KB)  || \
+                                     ((SIZE) == MPU_REGION_SIZE_64KB)  || \
+                                     ((SIZE) == MPU_REGION_SIZE_128KB) || \
+                                     ((SIZE) == MPU_REGION_SIZE_256KB) || \
+                                     ((SIZE) == MPU_REGION_SIZE_512KB) || \
+                                     ((SIZE) == MPU_REGION_SIZE_1MB)   || \
+                                     ((SIZE) == MPU_REGION_SIZE_2MB)   || \
+                                     ((SIZE) == MPU_REGION_SIZE_4MB)   || \
+                                     ((SIZE) == MPU_REGION_SIZE_8MB)   || \
+                                     ((SIZE) == MPU_REGION_SIZE_16MB)  || \
+                                     ((SIZE) == MPU_REGION_SIZE_32MB)  || \
+                                     ((SIZE) == MPU_REGION_SIZE_64MB)  || \
+                                     ((SIZE) == MPU_REGION_SIZE_128MB) || \
+                                     ((SIZE) == MPU_REGION_SIZE_256MB) || \
+                                     ((SIZE) == MPU_REGION_SIZE_512MB) || \
+                                     ((SIZE) == MPU_REGION_SIZE_1GB)   || \
+                                     ((SIZE) == MPU_REGION_SIZE_2GB)   || \
+                                     ((SIZE) == MPU_REGION_SIZE_4GB))
+
+#define IS_MPU_SUB_REGION_DISABLE(SUBREGION)  ((SUBREGION) < (uint16_t)0x00FF)
+#endif /* __MPU_PRESENT */
+
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup CORTEX_Private_Functions CORTEX Private Functions
+  * @brief    CORTEX private  functions
+  * @{
+  */
+
+#if (__MPU_PRESENT == 1)
+/**
+  * @brief  Disables the MPU
+  * @retval None
+  */
+__STATIC_INLINE void HAL_MPU_Disable(void)
+{
+  /* Disable fault exceptions */
+  SCB->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk;
+
+  /* Disable the MPU */
+  MPU->CTRL  &= ~MPU_CTRL_ENABLE_Msk;
+}
+
+/**
+  * @brief  Enables the MPU
+  * @param  MPU_Control: Specifies the control mode of the MPU during hard fault,
+  *          NMI, FAULTMASK and privileged access to the default memory
+  *          This parameter can be one of the following values:
+  *            @arg MPU_HFNMI_PRIVDEF_NONE
+  *            @arg MPU_HARDFAULT_NMI
+  *            @arg MPU_PRIVILEGED_DEFAULT
+  *            @arg MPU_HFNMI_PRIVDEF
+  * @retval None
+  */
+__STATIC_INLINE void HAL_MPU_Enable(uint32_t MPU_Control)
+{
+  /* Enable the MPU */
+  MPU->CTRL   = MPU_Control | MPU_CTRL_ENABLE_Msk;
+
+  /* Enable fault exceptions */
+  SCB->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk;
+}
+#endif /* __MPU_PRESENT */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32MP1xx_HAL_CORTEX_H */

meta-st/meta-st-stm32mp-addons/mx/stm32mp157d-vrpmdv-mon-mx/Drivers/STM32MP1xx_HAL_Driver/Inc/stm32mp1xx_hal_def.h

@@ -0,0 +1,207 @@
+/**
+  ******************************************************************************
+  * @file    stm32mp1xx_hal_def.h
+  * @author  MCD Application Team
+  * @brief   This file contains HAL common defines, enumeration, macros and 
+  *          structures definitions. 
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32MP1xx_HAL_DEF
+#define STM32MP1xx_HAL_DEF
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32mp1xx.h"
+#if defined(USE_HAL_LEGACY)
+  #include "Legacy/stm32_hal_legacy.h"
+#endif
+#include <stdio.h>
+
+/* Exported types ------------------------------------------------------------*/
+
+/** 
+  * @brief  HAL Status structures definition  
+  */  
+typedef enum 
+{
+  HAL_OK       = 0x00U,
+  HAL_ERROR    = 0x01U,
+  HAL_BUSY     = 0x02U,
+  HAL_TIMEOUT  = 0x03U
+} HAL_StatusTypeDef;
+
+/** 
+  * @brief  HAL Lock structures definition  
+  */
+typedef enum 
+{
+  HAL_UNLOCKED = 0x00U,
+  HAL_LOCKED   = 0x01U  
+} HAL_LockTypeDef;
+
+/* Exported macros -----------------------------------------------------------*/
+
+#define UNUSED(X) (void)X      /* To avoid gcc/g++ warnings */
+
+#define HAL_MAX_DELAY      0xFFFFFFFFU
+
+#define HAL_IS_BIT_SET(REG, BIT)         (((REG) & (BIT)) == (BIT))
+#define HAL_IS_BIT_CLR(REG, BIT)         (((REG) & (BIT)) == 0U)
+
+#define __HAL_LINKDMA(__HANDLE__, __PPP_DMA_FIELD__, __DMA_HANDLE__)               \
+                        do{                                                        \
+                              (__HANDLE__)->__PPP_DMA_FIELD__ = &(__DMA_HANDLE__); \
+                              (__DMA_HANDLE__).Parent = (__HANDLE__);             \
+                          } while(0U)
+                            
+/** @brief Reset the Handle's State field.
+  * @param __HANDLE__ specifies the Peripheral Handle.
+  * @note  This macro can be used for the following purpose:
+  *          - When the Handle is declared as local variable; before passing it as parameter
+  *            to HAL_PPP_Init() for the first time, it is mandatory to use this macro
+  *            to set to 0 the Handle's "State" field.
+  *            Otherwise, "State" field may have any random value and the first time the function
+  *            HAL_PPP_Init() is called, the low level hardware initialization will be missed
+  *            (i.e. HAL_PPP_MspInit() will not be executed).
+  *          - When there is a need to reconfigure the low level hardware: instead of calling
+  *            HAL_PPP_DeInit() then HAL_PPP_Init(), user can make a call to this macro then HAL_PPP_Init().
+  *            In this later function, when the Handle's "State" field is set to 0, it will execute the function
+  *            HAL_PPP_MspInit() which will reconfigure the low level hardware.
+  * @retval None
+  */
+#define __HAL_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = 0U)
+
+#if (USE_RTOS == 1U)
+/* Reserved for future use */
+  #error " USE_RTOS should be 0 in the current HAL release "
+#else
+  #define __HAL_LOCK(__HANDLE__)                                           \
+                                do{                                        \
+                                    if((__HANDLE__)->Lock == HAL_LOCKED)   \
+                                    {                                      \
+                                       return HAL_BUSY;                    \
+                                    }                                      \
+                                    else                                   \
+                                    {                                      \
+                                       (__HANDLE__)->Lock = HAL_LOCKED;    \
+                                    }                                      \
+                                  }while (0U)
+
+  #define __HAL_UNLOCK(__HANDLE__)                                          \
+                                  do{                                       \
+                                      (__HANDLE__)->Lock = HAL_UNLOCKED;    \
+                                    }while (0U)
+#endif /* USE_RTOS */
+
+#if  defined ( __GNUC__ )
+  #ifndef __weak
+    #define __weak   __attribute__((weak))
+  #endif /* __weak */
+  #ifndef __packed
+    #define __packed __attribute__((__packed__))
+  #endif /* __packed */
+#endif /* __GNUC__ */
+
+
+/* Macro to get variable aligned on 4-bytes, for __ICCARM__ the directive "#pragma data_alignment=4" must be used instead */
+#if defined   (__GNUC__)        /* GNU Compiler */
+  #ifndef __ALIGN_END
+#define __ALIGN_END    __attribute__ ((aligned (4U)))
+  #endif /* __ALIGN_END */
+  #ifndef __ALIGN_BEGIN  
+    #define __ALIGN_BEGIN
+  #endif /* __ALIGN_BEGIN */
+#else
+  #ifndef __ALIGN_END
+    #define __ALIGN_END
+  #endif /* __ALIGN_END */
+  #ifndef __ALIGN_BEGIN      
+    #if defined   (__CC_ARM)      /* ARM Compiler */
+#define __ALIGN_BEGIN    __align(4U)
+    #elif defined (__ICCARM__)    /* IAR Compiler */
+      #define __ALIGN_BEGIN 
+    #endif /* __CC_ARM */
+  #endif /* __ALIGN_BEGIN */
+#endif /* __GNUC__ */
+
+/* Macro to get variable aligned on 32-bytes,needed for cache maintenance purpose */
+#if defined   (__GNUC__)        /* GNU Compiler */
+#define ALIGN_32BYTES(buf)  buf __attribute__ ((aligned (32)))
+#elif defined (__ICCARM__)    /* IAR Compiler */
+#define ALIGN_32BYTES(buf) _Pragma("data_alignment=32") buf
+#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+#define ALIGN_32BYTES(buf) __ALIGNED(32) buf
+#elif defined   (__CC_ARM)      /* ARM Compiler */
+#define ALIGN_32BYTES(buf) __align(32) buf
+#endif /* __GNUC__ */
+
+/** 
+  * @brief  __RAM_FUNC definition
+  */
+#if defined ( __CC_ARM   )
+/* ARM Compiler
+   ------------
+   RAM functions are defined using the toolchain options.
+   Functions that are executed in RAM should reside in a separate source module.
+   Using the 'Options for File' dialog you can simply change the 'Code / Const'
+   area of a module to a memory space in physical RAM.
+   Available memory areas are declared in the 'Target' tab of the 'Options for Target'
+   dialog.
+*/
+#define __RAM_FUNC
+
+#elif defined ( __ICCARM__ )
+/* ICCARM Compiler
+   ---------------
+   RAM functions are defined using a specific toolchain keyword "__ramfunc".
+*/
+#define __RAM_FUNC __ramfunc
+
+#elif defined   (  __GNUC__  )
+/* GNU Compiler
+   ------------
+  RAM functions are defined using a specific toolchain attribute
+   "__attribute__((section(".RamFunc")))".
+*/
+#define __RAM_FUNC __attribute__((section(".RamFunc")))
+
+#endif
+
+/**
+  * @brief  __NOINLINE definition
+  */ 
+#if defined ( __CC_ARM   ) || defined   (  __GNUC__  )
+/* ARM & GNUCompiler 
+   ---------------- 
+*/
+#define __NOINLINE __attribute__ ( (noinline) )
+
+#elif defined ( __ICCARM__ )
+/* ICCARM Compiler
+   ---------------
+*/
+#define __NOINLINE _Pragma("optimize = no_inline")
+
+#endif
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32MP1xx_HAL_DEF */

meta-st/meta-st-stm32mp-addons/mx/stm32mp157d-vrpmdv-mon-mx/Drivers/STM32MP1xx_HAL_Driver/Inc/stm32mp1xx_hal_dma.h

@@ -0,0 +1,962 @@
+/**
+  ******************************************************************************
+  * @file    stm32mp1xx_hal_dma.h
+  * @author  MCD Application Team
+  * @brief   Header file of DMA HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32MP1xx_HAL_DMA_H
+#define __STM32MP1xx_HAL_DMA_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32mp1xx_hal_def.h"
+
+/** @addtogroup STM32MP1xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup DMA
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup DMA_Exported_Types DMA Exported Types
+  * @brief    DMA Exported Types
+  * @{
+  */
+
+/**
+  * @brief  DMA Configuration Structure definition
+  */
+typedef struct
+{
+  uint32_t Request;               /*!< Specifies the request selected for the specified stream.
+                                           This parameter can be a value of @ref DMA_Request_selection              */
+
+  uint32_t Direction;            /*!< Specifies if the data will be transferred from memory to peripheral,
+                                      from memory to memory or from peripheral to memory.
+                                      This parameter can be a value of @ref DMA_Data_transfer_direction              */
+
+  uint32_t PeriphInc;            /*!< Specifies whether the Peripheral address register should be incremented or not.
+                                      This parameter can be a value of @ref DMA_Peripheral_incremented_mode          */
+
+  uint32_t MemInc;               /*!< Specifies whether the memory address register should be incremented or not.
+                                      This parameter can be a value of @ref DMA_Memory_incremented_mode              */
+
+  uint32_t PeriphDataAlignment;  /*!< Specifies the Peripheral data width.
+                                      This parameter can be a value of @ref DMA_Peripheral_data_size                 */
+
+  uint32_t MemDataAlignment;     /*!< Specifies the Memory data width.
+                                      This parameter can be a value of @ref DMA_Memory_data_size                     */
+
+  uint32_t Mode;                 /*!< Specifies the operation mode of the DMAy Streamx.
+                                      This parameter can be a value of @ref DMA_mode
+                                      @note The circular buffer mode cannot be used if the memory-to-memory
+                                            data transfer is configured on the selected Stream                        */
+
+  uint32_t Priority;             /*!< Specifies the software priority for the DMAy Streamx.
+                                      This parameter can be a value of @ref DMA_Priority_level                        */
+
+  uint32_t FIFOMode;             /*!< Specifies if the FIFO mode or Direct mode will be used for the specified stream.
+                                      This parameter can be a value of @ref DMA_FIFO_direct_mode
+                                      @note The Direct mode (FIFO mode disabled) cannot be used if the
+                                            memory-to-memory data transfer is configured on the selected stream       */
+
+  uint32_t FIFOThreshold;        /*!< Specifies the FIFO threshold level.
+                                      This parameter can be a value of @ref DMA_FIFO_threshold_level                  */
+
+  uint32_t MemBurst;             /*!< Specifies the Burst transfer configuration for the memory transfers.
+                                      It specifies the amount of data to be transferred in a single non interruptible
+                                      transaction.
+                                      This parameter can be a value of @ref DMA_Memory_burst
+                                      @note The burst mode is possible only if the address Increment mode is enabled. */
+
+  uint32_t PeriphBurst;          /*!< Specifies the Burst transfer configuration for the peripheral transfers.
+                                      It specifies the amount of data to be transferred in a single non interruptible
+                                      transaction.
+                                      This parameter can be a value of @ref DMA_Peripheral_burst
+                                      @note The burst mode is possible only if the address Increment mode is enabled. */
+} DMA_InitTypeDef;
+
+/**
+  * @brief  HAL DMA State structures definition
+  */
+typedef enum
+{
+  HAL_DMA_STATE_RESET             = 0x00U,  /*!< DMA not yet initialized or disabled */
+  HAL_DMA_STATE_READY             = 0x01U,  /*!< DMA initialized and ready for use   */
+  HAL_DMA_STATE_BUSY              = 0x02U,  /*!< DMA process is ongoing              */
+  HAL_DMA_STATE_ERROR             = 0x03U,  /*!< DMA error state                     */
+  HAL_DMA_STATE_ABORT             = 0x04U,  /*!< DMA Abort state                     */
+} HAL_DMA_StateTypeDef;
+
+/**
+  * @brief  HAL DMA Transfer complete level structure definition
+  */
+typedef enum
+{
+  HAL_DMA_FULL_TRANSFER      = 0x00U,    /*!< Full transfer     */
+  HAL_DMA_HALF_TRANSFER      = 0x01U,    /*!< Half Transfer     */
+} HAL_DMA_LevelCompleteTypeDef;
+
+/**
+  * @brief  HAL DMA Callbacks IDs structure definition
+  */
+typedef enum
+{
+  HAL_DMA_XFER_CPLT_CB_ID          = 0x00U,    /*!< Full transfer     */
+  HAL_DMA_XFER_HALFCPLT_CB_ID      = 0x01U,    /*!< Half Transfer     */
+  HAL_DMA_XFER_M1CPLT_CB_ID        = 0x02U,    /*!< M1 Full Transfer  */
+  HAL_DMA_XFER_M1HALFCPLT_CB_ID    = 0x03U,    /*!< M1 Half Transfer  */
+  HAL_DMA_XFER_ERROR_CB_ID         = 0x04U,    /*!< Error             */
+  HAL_DMA_XFER_ABORT_CB_ID         = 0x05U,    /*!< Abort             */
+  HAL_DMA_XFER_ALL_CB_ID           = 0x06U     /*!< All               */
+} HAL_DMA_CallbackIDTypeDef;
+
+/**
+  * @brief  DMA handle Structure definition
+  */
+typedef struct __DMA_HandleTypeDef
+{
+  DMA_Stream_TypeDef             *Instance;                                                         /*!< Register base address                         */
+
+  DMA_InitTypeDef                 Init;                                                             /*!< DMA communication parameters                  */
+
+  HAL_LockTypeDef                 Lock;                                                             /*!< DMA locking object                            */
+
+  __IO HAL_DMA_StateTypeDef       State;                                                            /*!< DMA transfer state                            */
+
+  void                            *Parent;                                                          /*!< Parent object state                           */
+
+  void (* XferCpltCallback)(struct __DMA_HandleTypeDef *hdma);                                      /*!< DMA transfer complete callback                */
+
+  void (* XferHalfCpltCallback)(struct __DMA_HandleTypeDef *hdma);                                  /*!< DMA Half transfer complete callback           */
+
+  void (* XferM1CpltCallback)(struct __DMA_HandleTypeDef *hdma);                                    /*!< DMA transfer complete Memory1 callback        */
+
+  void (* XferM1HalfCpltCallback)(struct __DMA_HandleTypeDef *hdma);                                /*!< DMA transfer Half complete Memory1 callback   */
+
+  void (* XferErrorCallback)(struct __DMA_HandleTypeDef *hdma);                                     /*!< DMA transfer error callback                   */
+
+  void (* XferAbortCallback)(struct __DMA_HandleTypeDef *hdma);                                     /*!< DMA transfer Abort callback                   */
+
+  __IO uint32_t                    ErrorCode;                                                        /*!< DMA Error code                                */
+
+  uint32_t                         StreamBaseAddress;                                                /*!< DMA Stream Base Address                       */
+
+  uint32_t                         StreamIndex;                                                      /*!< DMA Stream Index                              */
+
+  DMAMUX_Channel_TypeDef           *DMAmuxChannel;                                                   /*!< DMAMUX Channel Base Address                   */
+
+  DMAMUX_ChannelStatus_TypeDef     *DMAmuxChannelStatus;                                             /*!< DMAMUX Channels Status Base Address           */
+
+  uint32_t                         DMAmuxChannelStatusMask;                                          /*!< DMAMUX Channel Status Mask                    */
+
+
+  DMAMUX_RequestGen_TypeDef        *DMAmuxRequestGen;                                                /*!< DMAMUX request generator Base Address         */
+
+  DMAMUX_RequestGenStatus_TypeDef  *DMAmuxRequestGenStatus;                                          /*!< DMAMUX request generator Status Address       */
+
+  uint32_t                         DMAmuxRequestGenStatusMask;                                       /*!< DMAMUX request generator Status mask          */
+
+} DMA_HandleTypeDef;
+
+/**
+  * @}
+  */
+
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup DMA_Exported_Constants DMA Exported Constants
+  * @brief    DMA Exported constants
+  * @{
+  */
+
+/** @defgroup DMA_Error_Code DMA Error Code
+  * @brief    DMA Error Code
+  * @{
+  */
+#define HAL_DMA_ERROR_NONE            (0x00000000U)    /*!< No error                                */
+#define HAL_DMA_ERROR_TE              (0x00000001U)    /*!< Transfer error                          */
+#define HAL_DMA_ERROR_FE              (0x00000002U)    /*!< FIFO error                              */
+#define HAL_DMA_ERROR_DME             (0x00000004U)    /*!< Direct Mode error                       */
+#define HAL_DMA_ERROR_TIMEOUT         (0x00000020U)    /*!< Timeout error                           */
+#define HAL_DMA_ERROR_PARAM           (0x00000040U)    /*!< Parameter error                         */
+#define HAL_DMA_ERROR_NO_XFER         (0x00000080U)    /*!< Abort requested with no Xfer ongoing    */
+#define HAL_DMA_ERROR_NOT_SUPPORTED   (0x00000100U)    /*!< Not supported mode                      */
+#define HAL_DMA_ERROR_SYNC            (0x00000200U)    /*!< DMAMUX sync overrun  error              */
+#define HAL_DMA_ERROR_REQGEN          (0x00000400U)    /*!< DMAMUX request generator overrun  error */
+#define HAL_DMA_ERROR_BUSY            (0x00000800U)    /*!< DMA Busy                          error */
+
+/**
+  * @}
+  */
+
+/** @defgroup DMA_Request_selection DMA Request selection
+  * @brief    DMA Request selection
+  * @{
+  */
+/* DMAMUX1 requests */
+#define DMA_REQUEST_MEM2MEM          0U  /*!< memory to memory transfer   */
+
+#define DMA_REQUEST_GENERATOR0       1U  /*!< DMAMUX1 request generator 0 */
+#define DMA_REQUEST_GENERATOR1       2U  /*!< DMAMUX1 request generator 1 */
+#define DMA_REQUEST_GENERATOR2       3U  /*!< DMAMUX1 request generator 2 */
+#define DMA_REQUEST_GENERATOR3       4U  /*!< DMAMUX1 request generator 3 */
+#define DMA_REQUEST_GENERATOR4       5U  /*!< DMAMUX1 request generator 4 */
+#define DMA_REQUEST_GENERATOR5       6U  /*!< DMAMUX1 request generator 5 */
+#define DMA_REQUEST_GENERATOR6       7U  /*!< DMAMUX1 request generator 6 */
+#define DMA_REQUEST_GENERATOR7       8U  /*!< DMAMUX1 request generator 7 */
+
+#define DMA_REQUEST_ADC1             9U  /*!< DMAMUX1 ADC1 request */
+#define DMA_REQUEST_ADC2             10U /*!< DMAMUX1 ADC2 request */
+
+#define DMA_REQUEST_TIM1_CH1         11U  /*!< DMAMUX1 TIM1 CH1 request  */
+#define DMA_REQUEST_TIM1_CH2         12U  /*!< DMAMUX1 TIM1 CH2 request  */
+#define DMA_REQUEST_TIM1_CH3         13U  /*!< DMAMUX1 TIM1 CH3 request  */
+#define DMA_REQUEST_TIM1_CH4         14U  /*!< DMAMUX1 TIM1 CH4 request  */
+#define DMA_REQUEST_TIM1_UP          15U  /*!< DMAMUX1 TIM1 UP request   */
+#define DMA_REQUEST_TIM1_TRIG        16U  /*!< DMAMUX1 TIM1 TRIG request */
+#define DMA_REQUEST_TIM1_COM         17U  /*!< DMAMUX1 TIM1 COM request  */
+
+#define DMA_REQUEST_TIM2_CH1         18U  /*!< DMAMUX1 TIM2 CH1 request  */
+#define DMA_REQUEST_TIM2_CH2         19U  /*!< DMAMUX1 TIM2 CH2 request  */
+#define DMA_REQUEST_TIM2_CH3         20U  /*!< DMAMUX1 TIM2 CH3 request  */
+#define DMA_REQUEST_TIM2_CH4         21U  /*!< DMAMUX1 TIM2 CH4 request  */
+#define DMA_REQUEST_TIM2_UP          22U  /*!< DMAMUX1 TIM2 UP request   */
+
+#define DMA_REQUEST_TIM3_CH1         23U  /*!< DMAMUX1 TIM3 CH1 request  */
+#define DMA_REQUEST_TIM3_CH2         24U  /*!< DMAMUX1 TIM3 CH2 request  */
+#define DMA_REQUEST_TIM3_CH3         25U  /*!< DMAMUX1 TIM3 CH3 request  */
+#define DMA_REQUEST_TIM3_CH4         26U  /*!< DMAMUX1 TIM3 CH4 request  */
+#define DMA_REQUEST_TIM3_UP          27U  /*!< DMAMUX1 TIM3 UP request   */
+#define DMA_REQUEST_TIM3_TRIG        28U  /*!< DMAMUX1 TIM3 TRIG request */
+
+#define DMA_REQUEST_TIM4_CH1         29U  /*!< DMAMUX1 TIM4 CH1 request  */
+#define DMA_REQUEST_TIM4_CH2         30U  /*!< DMAMUX1 TIM4 CH2 request  */
+#define DMA_REQUEST_TIM4_CH3         31U  /*!< DMAMUX1 TIM4 CH3 request  */
+#define DMA_REQUEST_TIM4_UP          32U  /*!< DMAMUX1 TIM4 UP request   */
+
+#define DMA_REQUEST_I2C1_RX          33U  /*!< DMAMUX1 I2C1 RX request   */
+#define DMA_REQUEST_I2C1_TX          34U  /*!< DMAMUX1 I2C1 TX request   */
+#define DMA_REQUEST_I2C2_RX          35U  /*!< DMAMUX1 I2C2 RX request   */
+#define DMA_REQUEST_I2C2_TX          36U  /*!< DMAMUX1 I2C2 TX request   */
+
+#define DMA_REQUEST_SPI1_RX          37U  /*!< DMAMUX1 SPI1 RX request   */
+#define DMA_REQUEST_SPI1_TX          38U  /*!< DMAMUX1 SPI1 TX request   */
+#define DMA_REQUEST_SPI2_RX          39U  /*!< DMAMUX1 SPI2 RX request   */
+#define DMA_REQUEST_SPI2_TX          40U  /*!< DMAMUX1 SPI2 TX request   */
+
+
+#define DMA_REQUEST_USART2_RX        43U  /*!< DMAMUX1 USART2 RX request */
+#define DMA_REQUEST_USART2_TX        44U  /*!< DMAMUX1 USART2 TX request */
+#define DMA_REQUEST_USART3_RX        45U  /*!< DMAMUX1 USART3 RX request */
+#define DMA_REQUEST_USART3_TX        46U  /*!< DMAMUX1 USART3 TX request */
+
+#define DMA_REQUEST_TIM8_CH1         47U  /*!< DMAMUX1 TIM8 CH1 request  */
+#define DMA_REQUEST_TIM8_CH2         48U  /*!< DMAMUX1 TIM8 CH2 request  */
+#define DMA_REQUEST_TIM8_CH3         49U  /*!< DMAMUX1 TIM8 CH3 request  */
+#define DMA_REQUEST_TIM8_CH4         50U  /*!< DMAMUX1 TIM8 CH4 request  */
+#define DMA_REQUEST_TIM8_UP          51U  /*!< DMAMUX1 TIM8 UP request   */
+#define DMA_REQUEST_TIM8_TRIG        52U  /*!< DMAMUX1 TIM8 TRIG request */
+#define DMA_REQUEST_TIM8_COM         53U  /*!< DMAMUX1 TIM8 COM request  */
+
+#define DMA_REQUEST_TIM5_CH1         55U  /*!< DMAMUX1 TIM5 CH1 request  */
+#define DMA_REQUEST_TIM5_CH2         56U  /*!< DMAMUX1 TIM5 CH2 request  */
+#define DMA_REQUEST_TIM5_CH3         57U  /*!< DMAMUX1 TIM5 CH3 request  */
+#define DMA_REQUEST_TIM5_CH4         58U  /*!< DMAMUX1 TIM5 CH4 request  */
+#define DMA_REQUEST_TIM5_UP          59U  /*!< DMAMUX1 TIM5 UP request   */
+#define DMA_REQUEST_TIM5_TRIG        60U  /*!< DMAMUX1 TIM5 TRIG request */
+
+#define DMA_REQUEST_SPI3_RX          61U  /*!< DMAMUX1 SPI3 RX request   */
+#define DMA_REQUEST_SPI3_TX          62U  /*!< DMAMUX1 SPI3 TX request   */
+
+#define DMA_REQUEST_UART4_RX         63U  /*!< DMAMUX1 UART4 RX request */
+#define DMA_REQUEST_UART4_TX         64U  /*!< DMAMUX1 UART4 TX request */
+#define DMA_REQUEST_UART5_RX         65U  /*!< DMAMUX1 UART5 RX request */
+#define DMA_REQUEST_UART5_TX         66U  /*!< DMAMUX1 UART5 TX request */
+
+#if defined (DAC1)
+#define DMA_REQUEST_DAC1             67U  /*!< DMAMUX1 DAC1 request      */
+#define DMA_REQUEST_DAC2             68U  /*!< DMAMUX1 DAC2 request      */
+#endif
+
+#define DMA_REQUEST_TIM6_UP          69U  /*!< DMAMUX1 TIM6 UP request   */
+#define DMA_REQUEST_TIM7_UP          70U  /*!< DMAMUX1 TIM7 UP request   */
+
+#define DMA_REQUEST_USART6_RX        71U  /*!< DMAMUX1 USART6 RX request */
+#define DMA_REQUEST_USART6_TX        72U  /*!< DMAMUX1 USART6 TX request */
+
+#define DMA_REQUEST_I2C3_RX          73U  /*!< DMAMUX1 I2C3 RX request   */
+#define DMA_REQUEST_I2C3_TX          74U  /*!< DMAMUX1 I2C3 TX request   */
+
+#if defined (DCMI)
+#define DMA_REQUEST_DCMI             75U  /*!< DMAMUX1 DCMI request      */
+#endif
+
+#if defined(CRYP2)
+#define DMA_REQUEST_CRYP2_IN         76U  /*!< DMAMUX1 CRYP2 IN request  */
+#define DMA_REQUEST_CRYP2_OUT        77U  /*!< DMAMUX1 CRYP2 OUT request */
+#endif
+
+
+#if defined (HASH2)
+#define DMA_REQUEST_HASH2_IN         78U  /*!< DMAMUX1 HASH2 IN request  */
+#endif
+
+#define DMA_REQUEST_UART7_RX         79U  /*!< DMAMUX1 UART7 RX request  */
+#define DMA_REQUEST_UART7_TX         80U  /*!< DMAMUX1 UART7 TX request  */
+#define DMA_REQUEST_UART8_RX         81U  /*!< DMAMUX1 UART8 RX request  */
+#define DMA_REQUEST_UART8_TX         82U  /*!< DMAMUX1 UART8 TX request  */
+
+#define DMA_REQUEST_SPI4_RX          83U  /*!< DMAMUX1 SPI4 RX request   */
+#define DMA_REQUEST_SPI4_TX          84U  /*!< DMAMUX1 SPI4 TX request   */
+#define DMA_REQUEST_SPI5_RX          85U  /*!< DMAMUX1 SPI5 RX request   */
+#define DMA_REQUEST_SPI5_TX          86U  /*!< DMAMUX1 SPI5 TX request   */
+
+#define DMA_REQUEST_SAI1_A           87U  /*!< DMAMUX1 SAI1 A request    */
+#define DMA_REQUEST_SAI1_B           88U  /*!< DMAMUX1 SAI1 B request    */
+#define DMA_REQUEST_SAI2_A           89U  /*!< DMAMUX1 SAI2 A request    */
+#define DMA_REQUEST_SAI2_B           90U  /*!< DMAMUX1 SAI2 B request    */
+
+#define DMA_REQUEST_DFSDM1_FLT4      91U  /*!< DMAMUX1 DFSDM1 Filter4 request   */
+#define DMA_REQUEST_DFSDM1_FLT5      92U  /*!< DMAMUX1 DFSDM1 Filter5 request   */
+
+#define DMA_REQUEST_SPDIF_RX_DT      93U  /*!< DMAMUX1 SPDIF RXDT request*/
+#define DMA_REQUEST_SPDIF_RX_CS      94U  /*!< DMAMUX1 SPDIF RXCS request*/
+
+#if defined (SAI4)
+#define DMA_REQUEST_SAI4_A           99U  /*!< DMAMUX1 SAI4 A request    */
+#define DMA_REQUEST_SAI4_B          100U   /*!< DMAMUX1 SAI4 B request    */
+#endif
+
+#define DMA_REQUEST_DFSDM1_FLT0     101U  /*!< DMAMUX1 DFSDM Filter0 request */
+#define DMA_REQUEST_DFSDM1_FLT1     102U  /*!< DMAMUX1 DFSDM Filter1 request */
+#define DMA_REQUEST_DFSDM1_FLT2     103U  /*!< DMAMUX1 DFSDM Filter2 request */
+#define DMA_REQUEST_DFSDM1_FLT3     104U  /*!< DMAMUX1 DFSDM Filter3 request */
+
+#define DMA_REQUEST_TIM15_CH1       105U  /*!< DMAMUX1 TIM15 CH1 request  */
+#define DMA_REQUEST_TIM15_UP        106U  /*!< DMAMUX1 TIM15 UP request   */
+#define DMA_REQUEST_TIM15_TRIG      107U  /*!< DMAMUX1 TIM15 TRIG request */
+#define DMA_REQUEST_TIM15_COM       108U  /*!< DMAMUX1 TIM15 COM request  */
+
+#define DMA_REQUEST_TIM16_CH1       109U  /*!< DMAMUX1 TIM16 CH1 request  */
+#define DMA_REQUEST_TIM16_UP        110U  /*!< DMAMUX1 TIM16 UP request   */
+
+#define DMA_REQUEST_TIM17_CH1       111U  /*!< DMAMUX1 TIM17 CH1 request  */
+#define DMA_REQUEST_TIM17_UP        112U  /*!< DMAMUX1 TIM17 UP request   */
+
+#if defined (SAI3)
+#define DMA_REQUEST_SAI3_A          113U  /*!< DMAMUX1 SAI3 A request  */
+#define DMA_REQUEST_SAI3_B          114U  /*!< DMAMUX1 SAI3 B request  */
+#endif
+
+#define DMA_REQUEST_I2C5_RX         115U  /*!< DMAMUX1 I2C5 RX request     */
+#define DMA_REQUEST_I2C5_TX         116U  /*!< DMAMUX1 I2C5 TX request     */
+
+
+
+/**
+  * @}
+  */
+
+/** @defgroup DMA_Data_transfer_direction DMA Data transfer direction
+  * @brief    DMA data transfer direction
+  * @{
+  */
+#define DMA_PERIPH_TO_MEMORY         ((uint32_t)0x00000000U)      /*!< Peripheral to memory direction */
+#define DMA_MEMORY_TO_PERIPH         ((uint32_t)DMA_SxCR_DIR_0)  /*!< Memory to peripheral direction */
+#define DMA_MEMORY_TO_MEMORY         ((uint32_t)DMA_SxCR_DIR_1)  /*!< Memory to memory direction     */
+/**
+  * @}
+  */
+
+/** @defgroup DMA_Peripheral_incremented_mode DMA Peripheral incremented mode
+  * @brief    DMA peripheral incremented mode
+  * @{
+  */
+#define DMA_PINC_ENABLE        ((uint32_t)DMA_SxCR_PINC)  /*!< Peripheral increment mode enable  */
+#define DMA_PINC_DISABLE       ((uint32_t)0x00000000U)     /*!< Peripheral increment mode disable */
+/**
+  * @}
+  */
+
+/** @defgroup DMA_Memory_incremented_mode DMA Memory incremented mode
+  * @brief    DMA memory incremented mode
+  * @{
+  */
+#define DMA_MINC_ENABLE         ((uint32_t)DMA_SxCR_MINC)  /*!< Memory increment mode enable  */
+#define DMA_MINC_DISABLE        ((uint32_t)0x00000000U)     /*!< Memory increment mode disable */
+/**
+  * @}
+  */
+
+/** @defgroup DMA_Peripheral_data_size DMA Peripheral data size
+  * @brief    DMA peripheral data size
+  * @{
+  */
+#define DMA_PDATAALIGN_BYTE          ((uint32_t)0x00000000U)        /*!< Peripheral data alignment: Byte     */
+#define DMA_PDATAALIGN_HALFWORD      ((uint32_t)DMA_SxCR_PSIZE_0)  /*!< Peripheral data alignment: HalfWord */
+#define DMA_PDATAALIGN_WORD          ((uint32_t)DMA_SxCR_PSIZE_1)  /*!< Peripheral data alignment: Word     */
+/**
+  * @}
+  */
+
+/** @defgroup DMA_Memory_data_size DMA Memory data size
+  * @brief    DMA memory data size
+  * @{
+  */
+#define DMA_MDATAALIGN_BYTE          ((uint32_t)0x00000000U)        /*!< Memory data alignment: Byte     */
+#define DMA_MDATAALIGN_HALFWORD      ((uint32_t)DMA_SxCR_MSIZE_0)  /*!< Memory data alignment: HalfWord */
+#define DMA_MDATAALIGN_WORD          ((uint32_t)DMA_SxCR_MSIZE_1)  /*!< Memory data alignment: Word     */
+/**
+  * @}
+  */
+
+/** @defgroup DMA_mode DMA mode
+  * @brief    DMA mode
+  * @{
+  */
+#define DMA_NORMAL         ((uint32_t)0x00000000U)       /*!< Normal mode                  */
+#define DMA_CIRCULAR       ((uint32_t)DMA_SxCR_CIRC)    /*!< Circular mode                */
+#define DMA_PFCTRL         ((uint32_t)DMA_SxCR_PFCTRL)  /*!< Peripheral flow control mode */
+/**
+  * @}
+  */
+
+/** @defgroup DMA_Priority_level DMA Priority level
+  * @brief    DMA priority levels
+  * @{
+  */
+#define DMA_PRIORITY_LOW             ((uint32_t)0x00000000U)     /*!< Priority level: Low       */
+#define DMA_PRIORITY_MEDIUM          ((uint32_t)DMA_SxCR_PL_0)  /*!< Priority level: Medium    */
+#define DMA_PRIORITY_HIGH            ((uint32_t)DMA_SxCR_PL_1)  /*!< Priority level: High      */
+#define DMA_PRIORITY_VERY_HIGH       ((uint32_t)DMA_SxCR_PL)    /*!< Priority level: Very High */
+/**
+  * @}
+  */
+
+/** @defgroup DMA_FIFO_direct_mode DMA FIFO direct mode
+  * @brief    DMA FIFO direct mode
+  * @{
+  */
+#define DMA_FIFOMODE_DISABLE        ((uint32_t)0x00000000U)       /*!< FIFO mode disable */
+#define DMA_FIFOMODE_ENABLE         ((uint32_t)DMA_SxFCR_DMDIS)  /*!< FIFO mode enable  */
+/**
+  * @}
+  */
+
+/** @defgroup DMA_FIFO_threshold_level DMA FIFO threshold level
+  * @brief    DMA FIFO level
+  * @{
+  */
+#define DMA_FIFO_THRESHOLD_1QUARTERFULL       ((uint32_t)0x00000000U)       /*!< FIFO threshold 1 quart full configuration  */
+#define DMA_FIFO_THRESHOLD_HALFFULL           ((uint32_t)DMA_SxFCR_FTH_0)  /*!< FIFO threshold half full configuration     */
+#define DMA_FIFO_THRESHOLD_3QUARTERSFULL      ((uint32_t)DMA_SxFCR_FTH_1)  /*!< FIFO threshold 3 quarts full configuration */
+#define DMA_FIFO_THRESHOLD_FULL               ((uint32_t)DMA_SxFCR_FTH)    /*!< FIFO threshold full configuration          */
+/**
+  * @}
+  */
+
+/** @defgroup DMA_Memory_burst DMA Memory burst
+  * @brief    DMA memory burst
+  * @{
+  */
+#define DMA_MBURST_SINGLE       ((uint32_t)0x00000000U)
+#define DMA_MBURST_INC4         ((uint32_t)DMA_SxCR_MBURST_0)
+#define DMA_MBURST_INC8         ((uint32_t)DMA_SxCR_MBURST_1)
+#define DMA_MBURST_INC16        ((uint32_t)DMA_SxCR_MBURST)
+/**
+  * @}
+  */
+
+/** @defgroup DMA_Peripheral_burst DMA Peripheral burst
+  * @brief    DMA peripheral burst
+  * @{
+  */
+#define DMA_PBURST_SINGLE       ((uint32_t)0x00000000U)
+#define DMA_PBURST_INC4         ((uint32_t)DMA_SxCR_PBURST_0)
+#define DMA_PBURST_INC8         ((uint32_t)DMA_SxCR_PBURST_1)
+#define DMA_PBURST_INC16        ((uint32_t)DMA_SxCR_PBURST)
+/**
+  * @}
+  */
+
+/** @defgroup DMA_interrupt_enable_definitions DMA interrupt enable definitions
+  * @brief    DMA interrupts definition
+  * @{
+  */
+#define DMA_IT_TC                         ((uint32_t)DMA_SxCR_TCIE)
+#define DMA_IT_HT                         ((uint32_t)DMA_SxCR_HTIE)
+#define DMA_IT_TE                         ((uint32_t)DMA_SxCR_TEIE)
+#define DMA_IT_DME                        ((uint32_t)DMA_SxCR_DMEIE)
+#define DMA_IT_FE                         ((uint32_t)0x00000080U)
+/**
+  * @}
+  */
+
+/** @defgroup DMA_flag_definitions DMA flag definitions
+  * @brief    DMA flag definitions
+  * @{
+  */
+#define DMA_FLAG_FEIF0_4                    ((uint32_t)0x00000001U)
+#define DMA_FLAG_DMEIF0_4                   ((uint32_t)0x00000004U)
+#define DMA_FLAG_TEIF0_4                    ((uint32_t)0x00000008U)
+#define DMA_FLAG_HTIF0_4                    ((uint32_t)0x00000010U)
+#define DMA_FLAG_TCIF0_4                    ((uint32_t)0x00000020U)
+#define DMA_FLAG_FEIF1_5                    ((uint32_t)0x00000040U)
+#define DMA_FLAG_DMEIF1_5                   ((uint32_t)0x00000100U)
+#define DMA_FLAG_TEIF1_5                    ((uint32_t)0x00000200U)
+#define DMA_FLAG_HTIF1_5                    ((uint32_t)0x00000400U)
+#define DMA_FLAG_TCIF1_5                    ((uint32_t)0x00000800U)
+#define DMA_FLAG_FEIF2_6                    ((uint32_t)0x00010000U)
+#define DMA_FLAG_DMEIF2_6                   ((uint32_t)0x00040000U)
+#define DMA_FLAG_TEIF2_6                    ((uint32_t)0x00080000U)
+#define DMA_FLAG_HTIF2_6                    ((uint32_t)0x00100000U)
+#define DMA_FLAG_TCIF2_6                    ((uint32_t)0x00200000U)
+#define DMA_FLAG_FEIF3_7                    ((uint32_t)0x00400000U)
+#define DMA_FLAG_DMEIF3_7                   ((uint32_t)0x01000000U)
+#define DMA_FLAG_TEIF3_7                    ((uint32_t)0x02000000U)
+#define DMA_FLAG_HTIF3_7                    ((uint32_t)0x04000000U)
+#define DMA_FLAG_TCIF3_7                    ((uint32_t)0x08000000U)
+/**
+  * @}
+  */
+
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup DMA_Exported_Macros DMA Exported Macros
+  * @{
+  */
+
+/** @brief Reset DMA handle state
+  * @param  __HANDLE__: specifies the DMA handle.
+  * @retval None
+  */
+#define __HAL_DMA_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DMA_STATE_RESET)
+
+/**
+  * @brief  Return the current DMA Stream FIFO filled level.
+  * @param  __HANDLE__: DMA handle
+  * @retval The FIFO filling state.
+  *           - DMA_FIFOStatus_Less1QuarterFull: when FIFO is less than 1 quarter-full
+  *                                              and not empty.
+  *           - DMA_FIFOStatus_1QuarterFull: if more than 1 quarter-full.
+  *           - DMA_FIFOStatus_HalfFull: if more than 1 half-full.
+  *           - DMA_FIFOStatus_3QuartersFull: if more than 3 quarters-full.
+  *           - DMA_FIFOStatus_Empty: when FIFO is empty
+  *           - DMA_FIFOStatus_Full: when FIFO is full
+  */
+#define __HAL_DMA_GET_FS(__HANDLE__) ((IS_DMA_INSTANCE(__HANDLE__))? (((DMA_Stream_TypeDef *)(__HANDLE__)->Instance)->FCR & (DMA_SxFCR_FS)) : 0)
+
+/**
+  * @brief  Enable the specified DMA Stream.
+  * @param  __HANDLE__: DMA handle
+  * @retval None
+  */
+#define __HAL_DMA_ENABLE(__HANDLE__) (((DMA_Stream_TypeDef *)(__HANDLE__)->Instance)->CR |=  DMA_SxCR_EN)
+
+/**
+  * @brief  Disable the specified DMA Stream.
+  * @param  __HANDLE__: DMA handle
+  * @retval None
+  */
+#define __HAL_DMA_DISABLE(__HANDLE__) (((DMA_Stream_TypeDef *)(__HANDLE__)->Instance)->CR &=  ~DMA_SxCR_EN)
+
+/* Interrupt & Flag management */
+
+/**
+  * @brief  Return the current DMA Stream transfer complete flag.
+  * @param  __HANDLE__: DMA handle
+  * @retval The specified transfer complete flag index.
+  */
+#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_TCIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_TCIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_TCIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_TCIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_TCIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_TCIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_TCIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_TCIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_TCIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_TCIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_TCIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_TCIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream3))? DMA_FLAG_TCIF3_7 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream3))? DMA_FLAG_TCIF3_7 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream7))? DMA_FLAG_TCIF3_7 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream7))? DMA_FLAG_TCIF3_7 :\
+ (uint32_t)0x00000000)
+/**
+  * @brief  Return the current DMA Stream half transfer complete flag.
+  * @param  __HANDLE__: DMA handle
+  * @retval The specified half transfer complete flag index.
+  */
+#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_HTIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_HTIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_HTIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_HTIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_HTIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_HTIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_HTIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_HTIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_HTIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_HTIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_HTIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_HTIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream3))? DMA_FLAG_HTIF3_7 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream3))? DMA_FLAG_HTIF3_7 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream7))? DMA_FLAG_HTIF3_7 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream7))? DMA_FLAG_HTIF3_7 :\
+ (uint32_t)0x00000000)
+/**
+  * @brief  Return the current DMA Stream transfer error flag.
+  * @param  __HANDLE__: DMA handle
+  * @retval The specified transfer error flag index.
+  */
+#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_TEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_TEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_TEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_TEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_TEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_TEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_TEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_TEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_TEIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_TEIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_TEIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_TEIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream3))? DMA_FLAG_TEIF3_7 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream3))? DMA_FLAG_TEIF3_7 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream7))? DMA_FLAG_TEIF3_7 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream7))? DMA_FLAG_TEIF3_7 :\
+ (uint32_t)0x00000000)
+/**
+  * @brief  Return the current DMA Stream FIFO error flag.
+  * @param  __HANDLE__: DMA handle
+  * @retval The specified FIFO error flag index.
+  */
+#define __HAL_DMA_GET_FE_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_FEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_FEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_FEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_FEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_FEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_FEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_FEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_FEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_FEIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_FEIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_FEIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_FEIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream3))? DMA_FLAG_FEIF3_7 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream3))? DMA_FLAG_FEIF3_7 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream7))? DMA_FLAG_FEIF3_7 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream7))? DMA_FLAG_FEIF3_7 :\
+  (uint32_t)0x00000000)
+
+/**
+  * @brief  Return the current DMA Stream direct mode error flag.
+  * @param  __HANDLE__: DMA handle
+  * @retval The specified direct mode error flag index.
+  */
+#define __HAL_DMA_GET_DME_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_DMEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_DMEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_DMEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_DMEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_DMEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_DMEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_DMEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_DMEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_DMEIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_DMEIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_DMEIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_DMEIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream3))? DMA_FLAG_DMEIF3_7 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream3))? DMA_FLAG_DMEIF3_7 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream7))? DMA_FLAG_DMEIF3_7 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream7))? DMA_FLAG_DMEIF3_7 :\
+  (uint32_t)0x00000000)
+
+/**
+  * @brief  Get the DMA Stream pending flags.
+  * @param  __HANDLE__: DMA handle
+  * @param  __FLAG__: Get the specified flag.
+  *          This parameter can be any combination of the following values:
+  *            @arg DMA_FLAG_TCIFx: Transfer complete flag.
+  *            @arg DMA_FLAG_HTIFx: Half transfer complete flag.
+  *            @arg DMA_FLAG_TEIFx: Transfer error flag.
+  *            @arg DMA_FLAG_DMEIFx: Direct mode error flag.
+  *            @arg DMA_FLAG_FEIFx: FIFO error flag.
+  *         Where x can be 0_4, 1_5, 2_6 or 3_7 to select the DMA Stream flag.
+  * @retval The state of FLAG (SET or RESET).
+  */
+#define __HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__)\
+(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA2_Stream3)? (DMA2->HISR & (__FLAG__)) :\
+ ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream7)? (DMA2->LISR & (__FLAG__)) :\
+ ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream3)? (DMA1->HISR & (__FLAG__)) : (DMA1->LISR & (__FLAG__)))
+
+/**
+  * @brief  Clear the DMA Stream pending flags.
+  * @param  __HANDLE__: DMA handle
+  * @param  __FLAG__: specifies the flag to clear.
+  *          This parameter can be any combination of the following values:
+  *            @arg DMA_FLAG_TCIFx: Transfer complete flag.
+  *            @arg DMA_FLAG_HTIFx: Half transfer complete flag.
+  *            @arg DMA_FLAG_TEIFx: Transfer error flag.
+  *            @arg DMA_FLAG_DMEIFx: Direct mode error flag.
+  *            @arg DMA_FLAG_FEIFx: FIFO error flag.
+  *         Where x can be 0_4, 1_5, 2_6 or 3_7 to select the DMA Stream flag.
+  * @retval None
+  */
+#define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) \
+(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA2_Stream3)? (DMA2->HIFCR = (__FLAG__)) :\
+ ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream7)? (DMA2->LIFCR = (__FLAG__)) :\
+ ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream3)? (DMA1->HIFCR = (__FLAG__)) : (DMA1->LIFCR = (__FLAG__)))
+
+/**
+  * @brief  Enable the specified DMA Stream interrupts.
+  * @param  __HANDLE__: DMA handle
+  * @param  __INTERRUPT__: specifies the DMA interrupt sources to be enabled or disabled.
+  *        This parameter can be one of the following values:
+  *           @arg DMA_IT_TC: Transfer complete interrupt mask.
+  *           @arg DMA_IT_HT: Half transfer complete interrupt mask.
+  *           @arg DMA_IT_TE: Transfer error interrupt mask.
+  *           @arg DMA_IT_FE: FIFO error interrupt mask.
+  *           @arg DMA_IT_DME: Direct mode error interrupt.
+  * @retval None
+  */
+
+#define __HAL_DMA_ENABLE_IT(__HANDLE__, __INTERRUPT__)   (((__INTERRUPT__) != DMA_IT_FE)? \
+(((DMA_Stream_TypeDef *)(__HANDLE__)->Instance)->CR |= (__INTERRUPT__)) : (((DMA_Stream_TypeDef *)(__HANDLE__)->Instance)->FCR |= (__INTERRUPT__)))
+
+/**
+  * @brief  Disable the specified DMA Stream interrupts.
+  * @param  __HANDLE__: DMA handle
+  * @param  __INTERRUPT__: specifies the DMA interrupt sources to be enabled or disabled.
+  *         This parameter can be one of the following values:
+  *            @arg DMA_IT_TC: Transfer complete interrupt mask.
+  *            @arg DMA_IT_HT: Half transfer complete interrupt mask.
+  *            @arg DMA_IT_TE: Transfer error interrupt mask.
+  *            @arg DMA_IT_FE: FIFO error interrupt mask.
+  *            @arg DMA_IT_DME: Direct mode error interrupt.
+  * @retval None
+  */
+#define __HAL_DMA_DISABLE_IT(__HANDLE__, __INTERRUPT__)  (((__INTERRUPT__) != DMA_IT_FE)? \
+(((DMA_Stream_TypeDef *)(__HANDLE__)->Instance)->CR &= ~(__INTERRUPT__)) : (((DMA_Stream_TypeDef *)(__HANDLE__)->Instance)->FCR &= ~(__INTERRUPT__)))
+
+/**
+  * @brief  Check whether the specified DMA Stream interrupt is enabled or not.
+  * @param  __HANDLE__: DMA handle
+  * @param  __INTERRUPT__: specifies the DMA interrupt source to check.
+  *         This parameter can be one of the following values:
+  *            @arg DMA_IT_TC: Transfer complete interrupt mask.
+  *            @arg DMA_IT_HT: Half transfer complete interrupt mask.
+  *            @arg DMA_IT_TE: Transfer error interrupt mask.
+  *            @arg DMA_IT_FE: FIFO error interrupt mask.
+  *            @arg DMA_IT_DME: Direct mode error interrupt.
+  * @retval The state of DMA_IT.
+  */
+#define __HAL_DMA_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__)  (((__INTERRUPT__) != DMA_IT_FE)? \
+                                                        (((DMA_Stream_TypeDef *)(__HANDLE__)->Instance)->CR & (__INTERRUPT__)) : \
+                                                        (((DMA_Stream_TypeDef *)(__HANDLE__)->Instance)->FCR & (__INTERRUPT__)))
+
+/**
+  * @brief  Writes the number of data units to be transferred on the DMA Stream.
+  * @param  __HANDLE__: DMA handle
+  * @param  __COUNTER__: Number of data units to be transferred (from 0 to 65535)
+  *          Number of data items depends only on the Peripheral data format.
+  *
+  * @note   If Peripheral data format is Bytes: number of data units is equal
+  *         to total number of bytes to be transferred.
+  *
+  * @note   If Peripheral data format is Half-Word: number of data units is
+  *         equal to total number of bytes to be transferred / 2.
+  *
+  * @note   If Peripheral data format is Word: number of data units is equal
+  *         to total  number of bytes to be transferred / 4.
+  *
+  * @retval The number of remaining data units in the current DMAy Streamx transfer.
+  */
+#define __HAL_DMA_SET_COUNTER(__HANDLE__, __COUNTER__) (((DMA_Stream_TypeDef *)(__HANDLE__)->Instance)->NDTR = (uint16_t)(__COUNTER__))
+
+/**
+  * @brief  Returns the number of remaining data units in the current DMAy Streamx transfer.
+  * @param  __HANDLE__: DMA handle
+  *
+  * @retval The number of remaining data units in the current DMA Stream transfer.
+  */
+#define __HAL_DMA_GET_COUNTER(__HANDLE__) (((DMA_Stream_TypeDef *)(__HANDLE__)->Instance)->NDTR)
+/**
+  * @}
+  */
+
+/* Include DMA HAL Extension module */
+#include "stm32mp1xx_hal_dma_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup DMA_Exported_Functions DMA Exported Functions
+  * @brief    DMA Exported functions
+  * @{
+  */
+
+/** @defgroup DMA_Exported_Functions_Group1 Initialization and de-initialization functions
+  * @brief   Initialization and de-initialization functions
+  * @{
+  */
+HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma);
+HAL_StatusTypeDef HAL_DMA_DeInit(DMA_HandleTypeDef *hdma);
+/**
+  * @}
+  */
+
+/** @defgroup DMA_Exported_Functions_Group2 I/O operation functions
+  * @brief   I/O operation functions
+  * @{
+  */
+HAL_StatusTypeDef HAL_DMA_Start(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
+HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
+HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma);
+HAL_StatusTypeDef HAL_DMA_Abort_IT(DMA_HandleTypeDef *hdma);
+HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, HAL_DMA_LevelCompleteTypeDef CompleteLevel, uint32_t Timeout);
+void              HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma);
+HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID, void (* pCallback)(DMA_HandleTypeDef *_hdma));
+HAL_StatusTypeDef HAL_DMA_UnRegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID);
+
+/**
+  * @}
+  */
+
+/** @defgroup DMA_Exported_Functions_Group3 Peripheral State functions
+  * @brief    Peripheral State functions
+  * @{
+  */
+HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma);
+uint32_t             HAL_DMA_GetError(DMA_HandleTypeDef *hdma);
+/**
+  * @}
+  */
+/**
+  * @}
+  */
+/* Private Constants -------------------------------------------------------------*/
+/** @defgroup DMA_Private_Constants DMA Private Constants
+  * @brief    DMA private defines and constants
+  * @{
+  */
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup DMA_Private_Macros DMA Private Macros
+  * @brief    DMA private macros
+  * @{
+  */
+#define IS_DMA_REQUEST(REQUEST) ((REQUEST) <= DMA_REQUEST_I2C5_TX)
+
+
+#define IS_DMA_INSTANCE(__HANDLE__) ( \
+                                      (((uint32_t)((__HANDLE__)->Instance) >= ((uint32_t)DMA1_Stream0)) &&  \
+                                       ((uint32_t)((__HANDLE__)->Instance) <= ((uint32_t)DMA2_Stream7)))    \
+                                    )
+
+#define IS_DMA_DIRECTION(DIRECTION) (((DIRECTION) == DMA_PERIPH_TO_MEMORY ) || \
+                                     ((DIRECTION) == DMA_MEMORY_TO_PERIPH)  || \
+                                     ((DIRECTION) == DMA_MEMORY_TO_MEMORY))
+
+#define IS_DMA_BUFFER_SIZE(SIZE) (((SIZE) >= 0x01U) && ((SIZE) < 0x10000U))
+
+#define IS_DMA_PERIPHERAL_INC_STATE(STATE) (((STATE) == DMA_PINC_ENABLE) || \
+                                            ((STATE) == DMA_PINC_DISABLE))
+
+#define IS_DMA_MEMORY_INC_STATE(STATE) (((STATE) == DMA_MINC_ENABLE)  || \
+                                        ((STATE) == DMA_MINC_DISABLE))
+
+#define IS_DMA_PERIPHERAL_DATA_SIZE(SIZE) (((SIZE) == DMA_PDATAALIGN_BYTE)     || \
+                                           ((SIZE) == DMA_PDATAALIGN_HALFWORD) || \
+                                           ((SIZE) == DMA_PDATAALIGN_WORD))
+
+#define IS_DMA_MEMORY_DATA_SIZE(SIZE) (((SIZE) == DMA_MDATAALIGN_BYTE)     || \
+                                       ((SIZE) == DMA_MDATAALIGN_HALFWORD) || \
+                                       ((SIZE) == DMA_MDATAALIGN_WORD ))
+
+#define IS_DMA_MODE(MODE) (((MODE) == DMA_NORMAL )  || \
+                           ((MODE) == DMA_CIRCULAR) || \
+                           ((MODE) == DMA_PFCTRL))
+
+#define IS_DMA_PRIORITY(PRIORITY) (((PRIORITY) == DMA_PRIORITY_LOW )   || \
+                                   ((PRIORITY) == DMA_PRIORITY_MEDIUM) || \
+                                   ((PRIORITY) == DMA_PRIORITY_HIGH)   || \
+                                   ((PRIORITY) == DMA_PRIORITY_VERY_HIGH))
+
+#define IS_DMA_FIFO_MODE_STATE(STATE) (((STATE) == DMA_FIFOMODE_DISABLE ) || \
+                                       ((STATE) == DMA_FIFOMODE_ENABLE))
+
+#define IS_DMA_FIFO_THRESHOLD(THRESHOLD) (((THRESHOLD) == DMA_FIFO_THRESHOLD_1QUARTERFULL ) || \
+                                          ((THRESHOLD) == DMA_FIFO_THRESHOLD_HALFFULL)      || \
+                                          ((THRESHOLD) == DMA_FIFO_THRESHOLD_3QUARTERSFULL) || \
+                                          ((THRESHOLD) == DMA_FIFO_THRESHOLD_FULL))
+
+#define IS_DMA_MEMORY_BURST(BURST) (((BURST) == DMA_MBURST_SINGLE) || \
+                                    ((BURST) == DMA_MBURST_INC4)   || \
+                                    ((BURST) == DMA_MBURST_INC8)   || \
+                                    ((BURST) == DMA_MBURST_INC16))
+
+#define IS_DMA_PERIPHERAL_BURST(BURST) (((BURST) == DMA_PBURST_SINGLE) || \
+                                        ((BURST) == DMA_PBURST_INC4)   || \
+                                        ((BURST) == DMA_PBURST_INC8)   || \
+                                        ((BURST) == DMA_PBURST_INC16))
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup DMA_Private_Functions DMA Private Functions
+  * @brief    DMA private  functions
+  * @{
+  */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32MP1xx_HAL_DMA_H */

meta-st/meta-st-stm32mp-addons/mx/stm32mp157d-vrpmdv-mon-mx/Drivers/STM32MP1xx_HAL_Driver/Inc/stm32mp1xx_hal_dma_ex.h

@@ -0,0 +1,252 @@
+/**
+  ******************************************************************************
+  * @file    stm32mp1xx_hal_dma_ex.h
+  * @author  MCD Application Team
+  * @brief   Header file of DMA HAL extension module.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32MP1xx_HAL_DMA_EX_H
+#define STM32MP1xx_HAL_DMA_EX_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32mp1xx_hal_def.h"
+
+/** @addtogroup STM32MP1xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup DMAEx
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup DMAEx_Exported_Types DMAEx Exported Types
+  * @brief DMAEx Exported types
+  * @{
+  */
+
+/**
+  * @brief  HAL DMA Memory definition
+  */
+typedef enum
+{
+  MEMORY0      = 0x00U,    /*!< Memory 0     */
+  MEMORY1      = 0x01U,    /*!< Memory 1     */
+
+} HAL_DMA_MemoryTypeDef;
+
+/**
+  * @brief  HAL DMAMUX Synchronization configuration structure definition
+  */
+typedef struct
+{
+  uint32_t SyncSignalID;  /*!< Specifies the synchronization signal gating the DMA request in periodic mode.
+                              This parameter can be a value of @ref DMAEx_MUX_SyncSignalID_selection */
+
+  uint32_t SyncPolarity;  /*!< Specifies the polarity of the signal on which the DMA request is synchronized.
+                              This parameter can be a value of @ref DMAEx_MUX_SyncPolarity_selection */
+
+  FunctionalState SyncEnable;  /*!< Specifies if the synchronization shall be enabled or disabled
+                                    This parameter can take the value ENABLE or DISABLE*/
+
+
+  FunctionalState EventEnable;    /*!< Specifies if an event shall be generated once the RequestNumber is reached.
+                                       This parameter can take the value ENABLE or DISABLE */
+
+  uint32_t RequestNumber; /*!< Specifies the number of DMA request that will be authorized after a sync event.
+                               This parameters can be in the range 1 to 32 */
+
+} HAL_DMA_MuxSyncConfigTypeDef;
+
+
+/**
+  * @brief  HAL DMAMUX request generator parameters structure definition
+  */
+typedef struct
+{
+  uint32_t SignalID;      /*!< Specifies the ID of the signal used for DMAMUX request generator
+                              This parameter can be a value of @ref DMAEx_MUX_SignalGeneratorID_selection */
+
+  uint32_t Polarity;       /*!< Specifies the polarity of the signal on which the request is generated.
+                             This parameter can be a value of @ref DMAEx_MUX_RequestGeneneratorPolarity_selection */
+
+  uint32_t RequestNumber;  /*!< Specifies the number of DMA request that will be generated after a signal event.
+                                This parameters can be in the range 1 to 32 */
+
+} HAL_DMA_MuxRequestGeneratorConfigTypeDef;
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup DMAEx_Exported_Constants DMA Exported Constants
+  * @brief    DMAEx Exported constants
+  * @{
+  */
+
+/** @defgroup DMAEx_MUX_SyncSignalID_selection DMAEx MUX SyncSignalID selection
+  * @brief    DMAEx MUX SyncSignalID selection
+  * @{
+  */
+#define HAL_DMAMUX1_SYNC_DMAMUX1_CH0_EVT   0U   /*!< DMAMUX1 synchronization Signal is DMAMUX1 Channel0 Event */
+#define HAL_DMAMUX1_SYNC_DMAMUX1_CH1_EVT   1U   /*!< DMAMUX1 synchronization Signal is DMAMUX1 Channel1 Event */
+#define HAL_DMAMUX1_SYNC_DMAMUX1_CH2_EVT   2U   /*!< DMAMUX1 synchronization Signal is DMAMUX1 Channel2 Event */
+#define HAL_DMAMUX1_SYNC_LPTIM1_OUT        3U   /*!< DMAMUX1 synchronization Signal is LPTIM1 OUT             */
+#define HAL_DMAMUX1_SYNC_LPTIM2_OUT        4U   /*!< DMAMUX1 synchronization Signal is LPTIM2 OUT             */
+#define HAL_DMAMUX1_SYNC_LPTIM3_OUT        5U   /*!< DMAMUX1 synchronization Signal is LPTIM3 OUT             */
+#define HAL_DMAMUX1_SYNC_EXTI0             6U   /*!< DMAMUX1 synchronization Signal is EXTI0 IT               */
+#define HAL_DMAMUX1_SYNC_TIM12_TRGO        7U   /*!< DMAMUX1 synchronization Signal is TIM12 TRGO             */
+
+/**
+  * @}
+  */
+
+/** @defgroup DMAEx_MUX_SyncPolarity_selection DMAEx MUX SyncPolarity selection
+  * @brief    DMAEx MUX SyncPolarity selection
+  * @{
+  */
+#define HAL_DMAMUX_SYNC_NO_EVENT        0x00000000U             /*!< block synchronization events                    */
+#define HAL_DMAMUX_SYNC_RISING          DMAMUX_CxCR_SPOL_0      /*!< synchronize with rising edge events             */
+#define HAL_DMAMUX_SYNC_FALLING         DMAMUX_CxCR_SPOL_1      /*!< synchronize with falling edge events            */
+#define HAL_DMAMUX_SYNC_RISING_FALLING  DMAMUX_CxCR_SPOL        /*!< synchronize with rising and falling edge events */
+
+/**
+  * @}
+  */
+
+
+/** @defgroup DMAEx_MUX_SignalGeneratorID_selection DMAEx MUX SignalGeneratorID selection
+  * @brief    DMAEx MUX SignalGeneratorID selection
+  * @{
+  */
+#define HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH0_EVT   0U   /*!< DMAMUX1 Request generator Signal is DMAMUX1 Channel0 Event */
+#define HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH1_EVT   1U   /*!< DMAMUX1 Request generator Signal is DMAMUX1 Channel1 Event */
+#define HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH2_EVT   2U   /*!< DMAMUX1 Request generator Signal is DMAMUX1 Channel2 Event */
+#define HAL_DMAMUX1_REQ_GEN_LPTIM1_OUT        3U   /*!< DMAMUX1 Request generator Signal is LPTIM1 OUT             */
+#define HAL_DMAMUX1_REQ_GEN_LPTIM2_OUT        4U   /*!< DMAMUX1 Request generator Signal is LPTIM2 OUT             */
+#define HAL_DMAMUX1_REQ_GEN_LPTIM3_OUT        5U   /*!< DMAMUX1 Request generator Signal is LPTIM3 OUT             */
+#define HAL_DMAMUX1_REQ_GEN_EXTI0             6U   /*!< DMAMUX1 Request generator Signal is EXTI0 IT               */
+#define HAL_DMAMUX1_REQ_GEN_TIM12_TRGO        7U   /*!< DMAMUX1 Request generator Signal is TIM12 TRGO             */
+
+
+/**
+  * @}
+  */
+
+/** @defgroup DMAEx_MUX_RequestGeneneratorPolarity_selection DMAEx MUX RequestGeneneratorPolarity selection
+  * @brief    DMAEx MUX RequestGeneneratorPolarity selection
+  * @{
+  */
+#define HAL_DMAMUX_REQ_GEN_NO_EVENT        0x00000000U           /*!< block request generator events                     */
+#define HAL_DMAMUX_REQ_GEN_RISING          DMAMUX_RGxCR_GPOL_0  /*!< generate request on rising edge events             */
+#define HAL_DMAMUX_REQ_GEN_FALLING         DMAMUX_RGxCR_GPOL_1  /*!< generate request on falling edge events            */
+#define HAL_DMAMUX_REQ_GEN_RISING_FALLING  DMAMUX_RGxCR_GPOL    /*!< generate request on rising and falling edge events */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup DMAEx_Exported_Functions DMAEx Exported Functions
+  * @brief   DMAEx Exported functions
+  * @{
+  */
+
+/** @defgroup DMAEx_Exported_Functions_Group1 Extended features functions
+  * @brief   Extended features functions
+  * @{
+  */
+
+/* IO operation functions *******************************************************/
+HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength);
+HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength);
+HAL_StatusTypeDef HAL_DMAEx_ChangeMemory(DMA_HandleTypeDef *hdma, uint32_t Address, HAL_DMA_MemoryTypeDef memory);
+HAL_StatusTypeDef HAL_DMAEx_ConfigMuxSync(DMA_HandleTypeDef *hdma, HAL_DMA_MuxSyncConfigTypeDef *pSyncConfig);
+HAL_StatusTypeDef HAL_DMAEx_ConfigMuxRequestGenerator(DMA_HandleTypeDef *hdma, HAL_DMA_MuxRequestGeneratorConfigTypeDef *pRequestGeneratorConfig);
+HAL_StatusTypeDef HAL_DMAEx_EnableMuxRequestGenerator(DMA_HandleTypeDef *hdma);
+HAL_StatusTypeDef HAL_DMAEx_DisableMuxRequestGenerator(DMA_HandleTypeDef *hdma);
+
+void HAL_DMAEx_MUX_IRQHandler(DMA_HandleTypeDef *hdma);
+/**
+  * @}
+  */
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup DMAEx_Private_Macros DMA Private Macros
+  * @brief    DMAEx private macros
+  * @{
+  */
+
+#define IS_DMAMUX_SYNC_SIGNAL_ID(SIGNAL_ID) ((SIGNAL_ID) <= HAL_DMAMUX1_SYNC_TIM12_TRGO)
+#define IS_DMAMUX_SYNC_REQUEST_NUMBER(REQUEST_NUMBER) (((REQUEST_NUMBER) > 0U) && ((REQUEST_NUMBER) <= 32U))
+
+#define IS_DMAMUX_SYNC_POLARITY(POLARITY) (((POLARITY) == HAL_DMAMUX_SYNC_NO_EVENT)    || \
+                                           ((POLARITY) == HAL_DMAMUX_SYNC_RISING)   || \
+                                           ((POLARITY) == HAL_DMAMUX_SYNC_FALLING)  || \
+                                           ((POLARITY) == HAL_DMAMUX_SYNC_RISING_FALLING))
+
+#define IS_DMAMUX_SYNC_STATE(SYNC) (((SYNC) == DISABLE)   || ((SYNC) == ENABLE))
+
+#define IS_DMAMUX_SYNC_EVENT(EVENT) (((EVENT) == DISABLE)   || \
+                                     ((EVENT) == ENABLE))
+
+#define IS_DMAMUX_REQUEST_GEN_SIGNAL_ID(SIGNAL_ID) ((SIGNAL_ID) <= HAL_DMAMUX1_REQ_GEN_TIM12_TRGO)
+
+#define IS_DMAMUX_REQUEST_GEN_REQUEST_NUMBER(REQUEST_NUMBER) (((REQUEST_NUMBER) > 0U) && ((REQUEST_NUMBER) <= 32U))
+
+#define IS_DMAMUX_REQUEST_GEN_POLARITY(POLARITY) (((POLARITY) == HAL_DMAMUX_REQ_GEN_NO_EVENT) || \
+                                                  ((POLARITY) == HAL_DMAMUX_REQ_GEN_RISING)   || \
+                                                  ((POLARITY) == HAL_DMAMUX_REQ_GEN_FALLING)   || \
+                                                  ((POLARITY) == HAL_DMAMUX_REQ_GEN_RISING_FALLING))
+
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup DMAEx_Private_Functions DMAEx Private Functions
+  * @brief DMAEx Private functions
+  * @{
+  */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32MP1xx_HAL_DMA_EX_H */

meta-st/meta-st-stm32mp-addons/mx/stm32mp157d-vrpmdv-mon-mx/Drivers/STM32MP1xx_HAL_Driver/Inc/stm32mp1xx_hal_exti.h

@@ -0,0 +1,368 @@
+/**
+  ******************************************************************************
+  * @file    stm32mp1xx_hal_exti.h
+  * @author  MCD Application Team
+  * @brief   Header file of EXTI HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32MP1xx_HAL_EXTI_H
+#define STM32MP1xx_HAL_EXTI_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32mp1xx_hal_def.h"
+
+/** @addtogroup STM32MP1xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup EXTI EXTI
+  * @brief EXTI HAL module driver
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup EXTI_Exported_Types EXTI Exported Types
+  * @{
+  */
+typedef enum
+{
+  HAL_EXTI_COMMON_CB_ID          = 0x00U,
+  HAL_EXTI_RISING_CB_ID          = 0x01U,
+  HAL_EXTI_FALLING_CB_ID         = 0x02U,
+} EXTI_CallbackIDTypeDef;
+
+
+/**
+  * @brief  EXTI Handle structure definition
+  */
+typedef struct
+{
+  uint32_t Line;                    /*!<  Exti line number */
+  void (* RisingCallback)(void);    /*!<  Exti rising callback */
+  void (* FallingCallback)(void);   /*!<  Exti falling callback */
+} EXTI_HandleTypeDef;
+
+/**
+  * @brief  EXTI Configuration structure definition
+  */
+typedef struct
+{
+  uint32_t Line;      /*!< The Exti line to be configured. This parameter
+                           can be a value of @ref EXTI_Line */
+  uint32_t Mode;      /*!< The Exit Mode to be configured for a core.
+                           This parameter can be a combination of @ref EXTI_Mode */
+  uint32_t Trigger;   /*!< The Exti Trigger to be configured. This parameter
+                           can be a value of @ref EXTI_Trigger */
+  uint32_t GPIOSel;   /*!< The Exti GPIO multiplexer selection to be configured.
+                           This parameter is only possible for line 0 to 15. It
+                           can be a value of @ref EXTI_GPIOSel */
+} EXTI_ConfigTypeDef;
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup EXTI_Exported_Constants EXTI Exported Constants
+  * @{
+  */
+
+/** @defgroup EXTI_Line  EXTI Line
+  * @{
+  */
+#define EXTI_LINE_0                         (EXTI_GPIO     | EXTI_EVENT | EXTI_REG1 | 0x00u)  /* EXTI_GPIO */
+#define EXTI_LINE_1                         (EXTI_GPIO     | EXTI_EVENT | EXTI_REG1 | 0x01u)  /* EXTI_GPIO */
+#define EXTI_LINE_2                         (EXTI_GPIO     | EXTI_EVENT | EXTI_REG1 | 0x02u)  /* EXTI_GPIO */
+#define EXTI_LINE_3                         (EXTI_GPIO     | EXTI_EVENT | EXTI_REG1 | 0x03u)  /* EXTI_GPIO */
+#define EXTI_LINE_4                         (EXTI_GPIO     | EXTI_EVENT | EXTI_REG1 | 0x04u)  /* EXTI_GPIO */
+#define EXTI_LINE_5                         (EXTI_GPIO     | EXTI_EVENT | EXTI_REG1 | 0x05u)  /* EXTI_GPIO */
+#define EXTI_LINE_6                         (EXTI_GPIO     | EXTI_EVENT | EXTI_REG1 | 0x06u)  /* EXTI_GPIO */
+#define EXTI_LINE_7                         (EXTI_GPIO     | EXTI_EVENT | EXTI_REG1 | 0x07u)  /* EXTI_GPIO */
+#define EXTI_LINE_8                         (EXTI_GPIO     | EXTI_EVENT | EXTI_REG1 | 0x08u)  /* EXTI_GPIO */
+#define EXTI_LINE_9                         (EXTI_GPIO     | EXTI_EVENT | EXTI_REG1 | 0x09u)  /* EXTI_GPIO */
+#define EXTI_LINE_10                        (EXTI_GPIO     | EXTI_EVENT | EXTI_REG1 | 0x0Au)  /* EXTI_GPIO */
+#define EXTI_LINE_11                        (EXTI_GPIO     | EXTI_EVENT | EXTI_REG1 | 0x0Bu)  /* EXTI_GPIO */
+#define EXTI_LINE_12                        (EXTI_GPIO     | EXTI_EVENT | EXTI_REG1 | 0x0Cu)  /* EXTI_GPIO */
+#define EXTI_LINE_13                        (EXTI_GPIO     | EXTI_EVENT | EXTI_REG1 | 0x0Du)  /* EXTI_GPIO */
+#define EXTI_LINE_14                        (EXTI_GPIO     | EXTI_EVENT | EXTI_REG1 | 0x0Eu)  /* EXTI_GPIO */
+#define EXTI_LINE_15                        (EXTI_GPIO     | EXTI_EVENT | EXTI_REG1 | 0x0Fu)  /* EXTI_GPIO */
+#define EXTI_LINE_16                        (EXTI_CONFIG   |              EXTI_REG1 | 0x10u)  /* PVD and AVD */
+#define EXTI_LINE_17                        (EXTI_CONFIG   | EXTI_EVENT | EXTI_REG1 | 0x11u)  /* RTC timestamp and SecureError wakeup */
+#define EXTI_LINE_18                        (EXTI_CONFIG   | EXTI_EVENT | EXTI_REG1 | 0x12u)  /* TAMP tamper and SecureError wakeup */
+#define EXTI_LINE_19                        (EXTI_CONFIG   | EXTI_EVENT | EXTI_REG1 | 0x13u)  /* RTC Wakeup timer and Alarms (A and B) and SecureError wakeup */
+#define EXTI_LINE_20                        (EXTI_RESERVED |              EXTI_REG1 | 0x14u)  /* RESERVED */
+#define EXTI_LINE_21                        (EXTI_DIRECT   |              EXTI_REG1 | 0x15u)  /* I2C1 wakeup */
+#define EXTI_LINE_22                        (EXTI_DIRECT   |              EXTI_REG1 | 0x16u)  /* I2C2 wakeup */
+#define EXTI_LINE_23                        (EXTI_DIRECT   |              EXTI_REG1 | 0x17u)  /* I2C3 wakeup */
+#define EXTI_LINE_24                        (EXTI_DIRECT   |              EXTI_REG1 | 0x18u)  /* I2C4 wakeup */
+#define EXTI_LINE_25                        (EXTI_DIRECT   |              EXTI_REG1 | 0x19u)  /* I2C5 wakeup */
+#define EXTI_LINE_26                        (EXTI_DIRECT   |              EXTI_REG1 | 0x1Au)  /* USART1 wakeup */
+#define EXTI_LINE_27                        (EXTI_DIRECT   |              EXTI_REG1 | 0x1Bu)  /* USART2 wakeup */
+#define EXTI_LINE_28                        (EXTI_DIRECT   |              EXTI_REG1 | 0x1Cu)  /* USART3 wakeup */
+#define EXTI_LINE_29                        (EXTI_DIRECT   |              EXTI_REG1 | 0x1Du)  /* USART6 wakeup */
+#define EXTI_LINE_30                        (EXTI_DIRECT   |              EXTI_REG1 | 0x1Eu)  /* UART4 wakeup */
+#define EXTI_LINE_31                        (EXTI_DIRECT   |              EXTI_REG1 | 0x1Fu)  /* UART5 wakeup */
+#define EXTI_LINE_32                        (EXTI_DIRECT   |              EXTI_REG2 | 0x00u)  /* UART7 wakeup */
+#define EXTI_LINE_33                        (EXTI_DIRECT   |              EXTI_REG2 | 0x01u)  /* UART8 wakeup */
+#define EXTI_LINE_34                        (EXTI_RESERVED |              EXTI_REG2 | 0x02u)  /* RESERVED */
+#define EXTI_LINE_35                        (EXTI_RESERVED |              EXTI_REG2 | 0x03u)  /* RESERVED */
+#define EXTI_LINE_36                        (EXTI_DIRECT   |              EXTI_REG2 | 0x04u)  /* SPI1 wakeup */
+#define EXTI_LINE_37                        (EXTI_DIRECT   |              EXTI_REG2 | 0x05u)  /* SPI2 wakeup */
+#define EXTI_LINE_38                        (EXTI_DIRECT   |              EXTI_REG2 | 0x06u)  /* SPI3 wakeup */
+#define EXTI_LINE_39                        (EXTI_DIRECT   |              EXTI_REG2 | 0x07u)  /* SPI4 wakeup */
+#define EXTI_LINE_40                        (EXTI_DIRECT   |              EXTI_REG2 | 0x08u)  /* SPI5 wakeup */
+#define EXTI_LINE_41                        (EXTI_DIRECT   |              EXTI_REG2 | 0x09u)  /* SPI6 wakeup */
+#define EXTI_LINE_42                        (EXTI_DIRECT   |              EXTI_REG2 | 0x0Au)  /* MDIOS wakeup */
+#define EXTI_LINE_43                        (EXTI_DIRECT   |              EXTI_REG2 | 0x0Bu)  /* USBH wakeup */
+#define EXTI_LINE_44                        (EXTI_DIRECT   |              EXTI_REG2 | 0x0Cu)  /* OTG wakeup */
+#define EXTI_LINE_45                        (EXTI_DIRECT   |              EXTI_REG2 | 0x0Du)  /* IWDG1 early wake */
+#define EXTI_LINE_46                        (EXTI_DIRECT   |              EXTI_REG2 | 0x0Eu)  /* IWDG1 early wake */
+#define EXTI_LINE_47                        (EXTI_DIRECT   |              EXTI_REG2 | 0x0Fu)  /* LPTIM1 wakeup */
+#define EXTI_LINE_48                        (EXTI_DIRECT   |              EXTI_REG2 | 0x10u)  /* LPTIM2 wakeup */
+#define EXTI_LINE_49                        (EXTI_RESERVED |              EXTI_REG2 | 0x11u)  /* RESERVED */
+#define EXTI_LINE_50                        (EXTI_DIRECT   |              EXTI_REG2 | 0x12u)  /* LPTIM3 wakeup */
+#define EXTI_LINE_51                        (EXTI_RESERVED |              EXTI_REG2 | 0x13u)  /* RESERVED */
+#define EXTI_LINE_52                        (EXTI_DIRECT   |              EXTI_REG2 | 0x14u)  /* LPTIM4 wakeup */
+#define EXTI_LINE_53                        (EXTI_DIRECT   |              EXTI_REG2 | 0x15u)  /* LPTIM5 wakeup */
+#define EXTI_LINE_54                        (EXTI_DIRECT   |              EXTI_REG2 | 0x16u)  /* I2C6 wakeup */
+#define EXTI_LINE_55                        (EXTI_DIRECT   |              EXTI_REG2 | 0x17u)  /* WKUP1 wakeup */
+#define EXTI_LINE_56                        (EXTI_DIRECT   |              EXTI_REG2 | 0x18u)  /* WKUP2 wakeup */
+#define EXTI_LINE_57                        (EXTI_DIRECT   |              EXTI_REG2 | 0x19u)  /* WKUP3 wakeup */
+#define EXTI_LINE_58                        (EXTI_DIRECT   |              EXTI_REG2 | 0x1Au)  /* WKUP4 wakeup */
+#define EXTI_LINE_59                        (EXTI_DIRECT   |              EXTI_REG2 | 0x1Bu)  /* WKUP5 wakeup */
+#define EXTI_LINE_60                        (EXTI_DIRECT   |              EXTI_REG2 | 0x1Cu)  /* WKUP6 wakeup */
+#define EXTI_LINE_61                        (EXTI_DIRECT   |              EXTI_REG2 | 0x1Du)  /* IPCC interrupt CPU1 */
+#define EXTI_LINE_62                        (EXTI_DIRECT   |              EXTI_REG2 | 0x1Eu)  /* IPCC interrupt CPU2 */
+#define EXTI_LINE_63                        (EXTI_DIRECT   |              EXTI_REG2 | 0x1Fu)  /* HSEM_IT1 interrupt */
+#define EXTI_LINE_64                        (EXTI_DIRECT   |              EXTI_REG3 | 0x00u)  /* HSEM_IT2 interrupt */
+#define EXTI_LINE_65                        (EXTI_CONFIG   |              EXTI_REG3 | 0x01u)  /* CPU2 SEV interrupt */
+#define EXTI_LINE_66                        (EXTI_CONFIG   | EXTI_EVENT | EXTI_REG3 | 0x02u)  /* CPU1 SEV interrupt */
+#define EXTI_LINE_67                        (EXTI_RESERVED |              EXTI_REG3 | 0x03u)  /* RESERVED */
+#define EXTI_LINE_68                        (EXTI_CONFIG   |              EXTI_REG3 | 0x04u)  /* WWDG1 reset */
+#define EXTI_LINE_69                        (EXTI_DIRECT   |              EXTI_REG3 | 0x05u)  /* HDMI CEC wakeup */
+#define EXTI_LINE_70                        (EXTI_DIRECT   |              EXTI_REG3 | 0x06u)  /* ETH1 pmt_intr_o wakeup */
+#define EXTI_LINE_71                        (EXTI_DIRECT   |              EXTI_REG3 | 0x07u)  /* ETH1 lpi_intr_o wakeup */
+#define EXTI_LINE_72                        (EXTI_DIRECT   |              EXTI_REG3 | 0x08u)  /* DTS wakeup */
+#define EXTI_LINE_73                        (EXTI_CONFIG   |              EXTI_REG3 | 0x09u)  /* CPU2 SYSRESETREQ local CPU2 reset */
+#define EXTI_LINE_74                        (EXTI_RESERVED |              EXTI_REG3 | 0x0Au)  /* RESERVED */
+#define EXTI_LINE_75                        (EXTI_DIRECT   |              EXTI_REG3 | 0x0Bu)  /* CDBGPWRUPREQ event */
+
+
+/**
+  * @}
+  */
+
+/** @defgroup EXTI_Mode  EXTI Mode
+  * @{
+  */
+
+#define EXTI_MODE_C1_NONE                   0x00000010u
+#define EXTI_MODE_C1_INTERRUPT              0x00000011u
+#define EXTI_MODE_C2_NONE                   0x00000020u
+#define EXTI_MODE_C2_INTERRUPT              0x00000021u
+#define EXTI_MODE_C2_EVENT                  0x00000022u
+/**
+  * @}
+  */
+
+/** @defgroup EXTI_Trigger  EXTI Trigger
+  * @{
+  */
+#define EXTI_TRIGGER_NONE                   0x00000000u
+#define EXTI_TRIGGER_RISING                 0x00000001u
+#define EXTI_TRIGGER_FALLING                0x00000002u
+#define EXTI_TRIGGER_RISING_FALLING         (EXTI_TRIGGER_RISING | EXTI_TRIGGER_FALLING)
+/**
+  * @}
+  */
+
+/** @defgroup EXTI_GPIOSel  EXTI GPIOSel
+  * @brief
+  * @{
+  */
+#define EXTI_GPIOA                          0x00000000u
+#define EXTI_GPIOB                          0x00000001u
+#define EXTI_GPIOC                          0x00000002u
+#define EXTI_GPIOD                          0x00000003u
+#define EXTI_GPIOE                          0x00000004u
+#define EXTI_GPIOF                          0x00000005u
+#define EXTI_GPIOG                          0x00000006u
+#define EXTI_GPIOH                          0x00000007u
+#define EXTI_GPIOI                          0x00000008u
+#define EXTI_GPIOJ                          0x00000009u
+#define EXTI_GPIOK                          0x0000000Au
+#define EXTI_GPIOZ                          0x0000000Bu
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup EXTI_Exported_Macros EXTI Exported Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private constants --------------------------------------------------------*/
+/** @defgroup EXTI_Private_Constants EXTI Private Constants
+  * @{
+  */
+/**
+  * @brief  EXTI Line property definition
+  */
+#define EXTI_PROPERTY_SHIFT                 24u
+#define EXTI_DIRECT                         (0x01uL << EXTI_PROPERTY_SHIFT)
+#define EXTI_CONFIG                         (0x02uL << EXTI_PROPERTY_SHIFT)
+#define EXTI_GPIO                           ((0x04uL << EXTI_PROPERTY_SHIFT) | EXTI_CONFIG)
+#define EXTI_RESERVED                       (0x08uL << EXTI_PROPERTY_SHIFT)
+#define EXTI_PROPERTY_MASK                  (EXTI_DIRECT | EXTI_CONFIG | EXTI_GPIO)
+
+/**
+  * @brief  EXTI Event presence definition
+  */
+#define EXTI_EVENT_PRESENCE_SHIFT           28u
+#define EXTI_EVENT                          (0x01uL << EXTI_EVENT_PRESENCE_SHIFT)
+#define EXTI_EVENT_PRESENCE_MASK            (EXTI_EVENT)
+
+/**
+  * @brief  EXTI Register and bit usage
+  */
+#define EXTI_REG_SHIFT                      16u
+#define EXTI_REG1                           (0x00uL << EXTI_REG_SHIFT)
+#define EXTI_REG2                           (0x01uL << EXTI_REG_SHIFT)
+#define EXTI_REG3                           (0x02uL << EXTI_REG_SHIFT)
+#define EXTI_REG_MASK                       (EXTI_REG1 | EXTI_REG2 | EXTI_REG3)
+#define EXTI_PIN_MASK                       0x0000001Fu
+
+/**
+  * @brief  EXTI Mask for interrupt & event mode
+  */
+#define EXTI_MODE_MASK                      (EXTI_MODE_C1 | EXTI_MODE_C2 | EXTI_MODE_EVENT | EXTI_MODE_INTERRUPT)
+
+/**
+  * @brief  EXTI Mask for trigger possibilities
+  */
+#define EXTI_TRIGGER_MASK                   (EXTI_TRIGGER_RISING | EXTI_TRIGGER_FALLING)
+
+/**
+  * @brief  EXTI Line number
+  */
+#define EXTI_LINE_NB                        76uL
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup EXTI_Private_Macros EXTI Private Macros
+  * @{
+  */
+#define IS_EXTI_LINE(__LINE__)          ((((__LINE__) & ~(EXTI_PROPERTY_MASK | EXTI_EVENT_PRESENCE_MASK | EXTI_REG_MASK | EXTI_PIN_MASK)) == 0x00u) && \
+                                        ((((__LINE__) & EXTI_PROPERTY_MASK) == EXTI_DIRECT)   || \
+                                         (((__LINE__) & EXTI_PROPERTY_MASK) == EXTI_CONFIG)   || \
+                                         (((__LINE__) & EXTI_PROPERTY_MASK) == EXTI_GPIO))    && \
+                                         (((__LINE__) & (EXTI_REG_MASK | EXTI_PIN_MASK))      < \
+                                         (((EXTI_LINE_NB / 32u) << EXTI_REG_SHIFT) | (EXTI_LINE_NB % 32u))))
+
+#define IS_EXTI_MODE(__LINE__)          ((((__LINE__) & EXTI_MODE_MASK) != 0x00u) && \
+                                         (((__LINE__) & ~EXTI_MODE_MASK) == 0x00u))
+
+#define IS_EXTI_TRIGGER(__LINE__)       (((__LINE__) & ~EXTI_TRIGGER_MASK) == 0x00u)
+
+#define IS_EXTI_PENDING_EDGE(__LINE__)  (((__LINE__) == EXTI_TRIGGER_RISING) || \
+                                         ((__LINE__) == EXTI_TRIGGER_FALLING))
+
+#define IS_EXTI_CONFIG_LINE(__LINE__)   (((__LINE__) & EXTI_CONFIG) != 0x00u)
+
+#define IS_EXTI_GPIO_PORT(__PORT__)     (((__PORT__) == EXTI_GPIOA) || \
+                                         ((__PORT__) == EXTI_GPIOB) || \
+                                         ((__PORT__) == EXTI_GPIOC) || \
+                                         ((__PORT__) == EXTI_GPIOD) || \
+                                         ((__PORT__) == EXTI_GPIOE) || \
+                                         ((__PORT__) == EXTI_GPIOF) || \
+                                         ((__PORT__) == EXTI_GPIOG) || \
+                                         ((__PORT__) == EXTI_GPIOH) || \
+                                         ((__PORT__) == EXTI_GPIOI) || \
+                                         ((__PORT__) == EXTI_GPIOK) || \
+                                         ((__PORT__) == EXTI_GPIOZ))
+#define IS_EXTI_GPIO_PIN(__PIN__)       ((__PIN__) < 16u)
+
+/**
+  * @}
+  */
+
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup EXTI_Exported_Functions EXTI Exported Functions
+  * @brief    EXTI Exported Functions
+  * @{
+  */
+
+/** @defgroup EXTI_Exported_Functions_Group1 Configuration functions
+  * @brief    Configuration functions
+  * @{
+  */
+/* Configuration functions ****************************************************/
+HAL_StatusTypeDef HAL_EXTI_SetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig);
+HAL_StatusTypeDef HAL_EXTI_GetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig);
+HAL_StatusTypeDef HAL_EXTI_ClearConfigLine(EXTI_HandleTypeDef *hexti);
+HAL_StatusTypeDef HAL_EXTI_RegisterCallback(EXTI_HandleTypeDef *hexti, EXTI_CallbackIDTypeDef CallbackID, void (*pPendingCbfn)(void));
+HAL_StatusTypeDef HAL_EXTI_GetHandle(EXTI_HandleTypeDef *hexti, uint32_t ExtiLine);
+/**
+  * @}
+  */
+
+/** @defgroup EXTI_Exported_Functions_Group2 IO operation functions
+  * @brief    IO operation functions
+  * @{
+  */
+/* IO operation functions *****************************************************/
+void              HAL_EXTI_IRQHandler(EXTI_HandleTypeDef *hexti);
+uint32_t          HAL_EXTI_GetPending(EXTI_HandleTypeDef *hexti, uint32_t Edge);
+void              HAL_EXTI_ClearPending(EXTI_HandleTypeDef *hexti, uint32_t Edge);
+void              HAL_EXTI_GenerateSWI(EXTI_HandleTypeDef *hexti);
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32MP1xx_HAL_EXTI_H */

meta-st/meta-st-stm32mp-addons/mx/stm32mp157d-vrpmdv-mon-mx/Drivers/STM32MP1xx_HAL_Driver/Inc/stm32mp1xx_hal_gpio.h

@@ -0,0 +1,359 @@
+/**
+  ******************************************************************************
+  * @file    stm32mp1xx_hal_gpio.h
+  * @author  MCD Application Team
+  * @brief   Header file of GPIO HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32MP1xx_HAL_GPIO_H
+#define __STM32MP1xx_HAL_GPIO_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32mp1xx_hal_def.h"
+
+/** @addtogroup STM32MP1xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup GPIO
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup GPIO_Exported_Types GPIO Exported Types
+  * @{
+  */
+
+/**
+  * @brief   GPIO Init structure definition
+  */
+typedef struct
+{
+  uint32_t Pin;       /*!< Specifies the GPIO pins to be configured.
+                           This parameter can be any value of @ref GPIO_pins_define */
+
+  uint32_t Mode;      /*!< Specifies the operating mode for the selected pins.
+                           This parameter can be a value of @ref GPIO_mode_define */
+
+  uint32_t Pull;      /*!< Specifies the Pull-up or Pull-Down activation for the selected pins.
+                           This parameter can be a value of @ref GPIO_pull_define */
+
+  uint32_t Speed;     /*!< Specifies the speed for the selected pins.
+                           This parameter can be a value of @ref GPIO_speed_define */
+
+  uint32_t Alternate;  /*!< Peripheral to be connected to the selected pins.
+                            This parameter can be a value of @ref GPIO_Alternate_function_selection */
+}GPIO_InitTypeDef;
+
+/**
+  * @brief  GPIO Bit SET and Bit RESET enumeration
+  */
+typedef enum
+{
+  GPIO_PIN_RESET = 0,
+  GPIO_PIN_SET
+}GPIO_PinState;
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup GPIO_Exported_Constants  GPIO Exported Constants
+  * @{
+  */
+
+/** @defgroup GPIO_pins_define  GPIO pins define
+  * @{
+  */
+#define GPIO_PIN_0                 ((uint16_t)0x0001U)  /* Pin 0 selected    */
+#define GPIO_PIN_1                 ((uint16_t)0x0002U)  /* Pin 1 selected    */
+#define GPIO_PIN_2                 ((uint16_t)0x0004U)  /* Pin 2 selected    */
+#define GPIO_PIN_3                 ((uint16_t)0x0008U)  /* Pin 3 selected    */
+#define GPIO_PIN_4                 ((uint16_t)0x0010U)  /* Pin 4 selected    */
+#define GPIO_PIN_5                 ((uint16_t)0x0020U)  /* Pin 5 selected    */
+#define GPIO_PIN_6                 ((uint16_t)0x0040U)  /* Pin 6 selected    */
+#define GPIO_PIN_7                 ((uint16_t)0x0080U)  /* Pin 7 selected    */
+#define GPIO_PIN_8                 ((uint16_t)0x0100U)  /* Pin 8 selected    */
+#define GPIO_PIN_9                 ((uint16_t)0x0200U)  /* Pin 9 selected    */
+#define GPIO_PIN_10                ((uint16_t)0x0400U)  /* Pin 10 selected   */
+#define GPIO_PIN_11                ((uint16_t)0x0800U)  /* Pin 11 selected   */
+#define GPIO_PIN_12                ((uint16_t)0x1000U)  /* Pin 12 selected   */
+#define GPIO_PIN_13                ((uint16_t)0x2000U)  /* Pin 13 selected   */
+#define GPIO_PIN_14                ((uint16_t)0x4000U)  /* Pin 14 selected   */
+#define GPIO_PIN_15                ((uint16_t)0x8000U)  /* Pin 15 selected   */
+#define GPIO_PIN_All               ((uint16_t)0xFFFFU)  /* All pins selected */
+
+#define GPIO_PIN_MASK              ((uint32_t)0x0000FFFFU) /* PIN mask for assert test */
+/**
+  * @}
+  */
+
+/** @defgroup GPIO_mode_define  GPIO mode define
+  * @brief GPIO Configuration Mode
+  *        Elements values convention: 0xX0yz00YZ
+  *           - X  : GPIO mode or EXTI Mode
+  *           - y  : External IT or Event trigger detection
+  *           - z  : IO configuration on External IT or Event
+  *           - Y  : Output type (Push Pull or Open Drain)
+  *           - Z  : IO Direction mode (Input, Output, Alternate or Analog)
+  * @{
+  */
+#define  GPIO_MODE_INPUT                        ((uint32_t)0x00000000U)   /*!< Input Floating Mode                   */
+#define  GPIO_MODE_OUTPUT_PP                    ((uint32_t)0x00000001U)   /*!< Output Push Pull Mode                 */
+#define  GPIO_MODE_OUTPUT_OD                    ((uint32_t)0x00000011U)   /*!< Output Open Drain Mode                */
+#define  GPIO_MODE_AF_PP                        ((uint32_t)0x00000002U)   /*!< Alternate Function Push Pull Mode     */
+#define  GPIO_MODE_AF_OD                        ((uint32_t)0x00000012U)   /*!< Alternate Function Open Drain Mode    */
+
+#define GPIO_MODE_AF                            GPIO_MODE_AF_PP           /*!< Alternate Function for Input PIN      */
+
+#define  GPIO_MODE_ANALOG                       ((uint32_t)0x00000003U)   /*!< Analog Mode  */
+
+#define  GPIO_MODE_IT_RISING                ((uint32_t)0x10110000U)   /*!< External Interrupt Mode with Rising edge trigger detection          */
+#define  GPIO_MODE_IT_FALLING               ((uint32_t)0x10210000U)   /*!< External Interrupt Mode with Falling edge trigger detection         */
+#define  GPIO_MODE_IT_RISING_FALLING        ((uint32_t)0x10310000U)   /*!< External Interrupt Mode with Rising/Falling edge trigger detection  */
+
+#define  GPIO_MODE_EVT_RISING               ((uint32_t)0x10120000U)   /*!< External Event Mode with Rising edge trigger detection               */
+#define  GPIO_MODE_EVT_FALLING              ((uint32_t)0x10220000U)   /*!< External Event Mode with Falling edge trigger detection              */
+#define  GPIO_MODE_EVT_RISING_FALLING       ((uint32_t)0x10320000U)   /*!< External Event Mode with Rising/Falling edge trigger detection       */
+/**
+  * @}
+  */
+
+/** @defgroup GPIO_speed_define  GPIO speed define
+  * @brief GPIO Output Maximum frequency
+  * @{
+  */
+#define  GPIO_SPEED_FREQ_LOW         ((uint32_t)0x00000000U)  /*!< Low speed     */
+#define  GPIO_SPEED_FREQ_MEDIUM      ((uint32_t)0x00000001U)  /*!< Medium speed  */
+#define  GPIO_SPEED_FREQ_HIGH        ((uint32_t)0x00000002U)  /*!< Fast speed    */
+#define  GPIO_SPEED_FREQ_VERY_HIGH   ((uint32_t)0x00000003U)  /*!< High speed    */
+/**
+  * @}
+  */
+
+ /** @defgroup GPIO_pull_define  GPIO pull define
+   * @brief GPIO Pull-Up or Pull-Down Activation
+   * @{
+   */
+#define  GPIO_NOPULL        ((uint32_t)0x00000000U)   /*!< No Pull-up or Pull-down activation  */
+#define  GPIO_PULLUP        ((uint32_t)0x00000001U)   /*!< Pull-up activation                  */
+#define  GPIO_PULLDOWN      ((uint32_t)0x00000002U)   /*!< Pull-down activation                */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup GPIO_Exported_Macros GPIO Exported Macros
+  * @{
+  */
+
+/**
+  * @brief  Checks whether the specified EXTI line is asserted or not.
+
+  * @param  __EXTI_LINE__: specifies the EXTI line to check.
+  *          This parameter can be GPIO_PIN_x where x can be(0..15)
+  * @retval The new state of __EXTI_LINE__ (SET or RESET).
+  */
+#define __HAL_GPIO_EXTI_GET_IT(__EXTI_LINE__) ((EXTI->RPR1 & (__EXTI_LINE__)) | (EXTI->FPR1 & (__EXTI_LINE__)))
+
+/**
+  * @brief  Clears the EXTI's line pending bits.
+  * @param  __EXTI_LINE__: specifies the EXTI lines to clear.
+  *          This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
+
+  * @retval None
+  */
+#define __HAL_GPIO_EXTI_CLEAR_IT(__EXTI_LINE__) do { \
+                                                     EXTI->RPR1 = (__EXTI_LINE__); \
+                                                     EXTI->FPR1 = (__EXTI_LINE__); \
+                                                   } while (0);
+
+/**
+  * @brief  Checks whether the specified EXTI line is asserted or not for Rising edge.
+
+  * @param  __EXTI_LINE__: specifies the EXTI line to check.
+  *          This parameter can be GPIO_PIN_x where x can be(0..15)
+  * @retval The new state of __EXTI_LINE__ (SET or RESET).
+  */
+#define __HAL_GPIO_EXTI_GET_RISING_IT(__EXTI_LINE__) (EXTI->RPR1 & (__EXTI_LINE__))
+
+/**
+  * @brief  Checks whether the specified EXTI line is asserted or not for Falling edge.
+
+  * @param  __EXTI_LINE__: specifies the EXTI line to check.
+  *          This parameter can be GPIO_PIN_x where x can be(0..15)
+  * @retval The new state of __EXTI_LINE__ (SET or RESET).
+  */
+#define __HAL_GPIO_EXTI_GET_FALLING_IT(__EXTI_LINE__) (EXTI->FPR1 & (__EXTI_LINE__))
+
+/**
+  * @brief  Clears the EXTI's line pending bits for Risng edge.
+  * @param  __EXTI_LINE__: specifies the EXTI lines to clear.
+  *          This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
+  * @retval None
+  */
+#define __HAL_GPIO_EXTI_CLEAR_RISING_IT(__EXTI_LINE__) do { \
+                                                       EXTI->RPR1 = (__EXTI_LINE__); \
+                                                     } while (0);
+
+/**
+  * @brief  Clears the EXTI's line pending bits for Falling edge.
+  * @param  __EXTI_LINE__: specifies the EXTI lines to clear.
+  *          This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
+  * @retval None
+  */
+#define __HAL_GPIO_EXTI_CLEAR_FALLING_IT(__EXTI_LINE__) do { \
+                                                       EXTI->FPR1 = (__EXTI_LINE__); \
+                                                     } while (0);
+
+/**
+  * @brief  Generates a Software interrupt on selected EXTI line.
+  * @param  __EXTI_LINE__: specifies the EXTI line to check.
+  *          This parameter can be GPIO_PIN_x where x can be(0..15)
+  * @retval None
+
+  */
+#define __HAL_GPIO_EXTI_GENERATE_SWIT(__EXTI_LINE__) (EXTI->SWIER1 |= (__EXTI_LINE__))
+
+/**
+  * @brief  Check whether the specified EXTI line flag is set or not.
+  * @param  __EXTI_LINE__ specifies the EXTI line flag to check.
+  *         This parameter can be GPIO_PIN_x where x can be(0..15)
+  * @retval The new state of __EXTI_LINE__ (SET or RESET).
+  */
+#define __HAL_GPIO_EXTI_GET_FLAG(__EXTI_LINE__)       __HAL_GPIO_EXTI_GET_IT(__EXTI_LINE__)
+
+/**
+  * @brief  Clear the EXTI line pending flags.
+  * @param  __EXTI_LINE__ specifies the EXTI lines flags to clear.
+  *         This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
+  * @retval None
+  */
+#define __HAL_GPIO_EXTI_CLEAR_FLAG(__EXTI_LINE__)     __HAL_GPIO_EXTI_CLEAR_IT(__EXTI_LINE__)
+
+/**
+  * @}
+  */
+
+/* Include GPIO HAL Extension module */
+#include "stm32mp1xx_hal_gpio_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup GPIO_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup GPIO_Exported_Functions_Group1
+  * @{
+  */
+/* Initialization and de-initialization functions *****************************/
+void  HAL_GPIO_Init(GPIO_TypeDef  *GPIOx, GPIO_InitTypeDef *GPIO_Init);
+void  HAL_GPIO_DeInit(GPIO_TypeDef  *GPIOx, uint32_t GPIO_Pin);
+/**
+  * @}
+  */
+
+/** @addtogroup GPIO_Exported_Functions_Group2
+  * @{
+  */
+/* IO operation functions *****************************************************/
+GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState);
+void HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin);
+void HAL_GPIO_EXTI_Rising_Callback(uint16_t GPIO_Pin);
+void HAL_GPIO_EXTI_Falling_Callback(uint16_t GPIO_Pin);
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup GPIO_Private_Constants GPIO Private Constants
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup GPIO_Private_Macros GPIO Private Macros
+  * @{
+  */
+#define IS_GPIO_PIN_ACTION(ACTION) (((ACTION) == GPIO_PIN_RESET) || ((ACTION) == GPIO_PIN_SET))
+
+#define IS_GPIO_PIN(__PIN__)       ((((uint32_t)(__PIN__) & GPIO_PIN_MASK ) != 0x00u) &&\
+                                    (((uint32_t)(__PIN__) & ~GPIO_PIN_MASK) == 0x00u))
+
+#define IS_GPIO_MODE(MODE) (((MODE) == GPIO_MODE_INPUT)              ||\
+                            ((MODE) == GPIO_MODE_OUTPUT_PP)          ||\
+                            ((MODE) == GPIO_MODE_OUTPUT_OD)          ||\
+                            ((MODE) == GPIO_MODE_AF_PP)              ||\
+                            ((MODE) == GPIO_MODE_AF_OD)              ||\
+                            ((MODE) == GPIO_MODE_IT_RISING)          ||\
+                            ((MODE) == GPIO_MODE_IT_FALLING)         ||\
+                            ((MODE) == GPIO_MODE_IT_RISING_FALLING)  ||\
+                            ((MODE) == GPIO_MODE_EVT_RISING)         ||\
+                            ((MODE) == GPIO_MODE_EVT_FALLING)        ||\
+                            ((MODE) == GPIO_MODE_EVT_RISING_FALLING) ||\
+                            ((MODE) == GPIO_MODE_ANALOG))
+
+#define IS_GPIO_SPEED(SPEED) (((SPEED) == GPIO_SPEED_FREQ_LOW)  || ((SPEED) == GPIO_SPEED_FREQ_MEDIUM) || \
+                              ((SPEED) == GPIO_SPEED_FREQ_HIGH) || ((SPEED) == GPIO_SPEED_FREQ_VERY_HIGH))
+
+#define IS_GPIO_PULL(PULL) (((PULL) == GPIO_NOPULL) || ((PULL) == GPIO_PULLUP) || \
+                            ((PULL) == GPIO_PULLDOWN))
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup GPIO_Private_Functions GPIO Private Functions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32MP1xx_HAL_GPIO_H */

meta-st/meta-st-stm32mp-addons/mx/stm32mp157d-vrpmdv-mon-mx/Drivers/STM32MP1xx_HAL_Driver/Inc/stm32mp1xx_hal_gpio_ex.h

@@ -0,0 +1,314 @@
+/**
+  ******************************************************************************
+  * @file    stm32mp1xx_hal_gpio_ex.h
+  * @author  MCD Application Team
+  * @brief   Header file of GPIO HAL Extension module.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32MP1xx_HAL_GPIO_EX_H
+#define __STM32MP1xx_HAL_GPIO_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32mp1xx_hal_def.h"
+
+/** @addtogroup STM32MP1xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup GPIOEx GPIOEx
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup GPIOEx_Exported_Constants GPIO Exported Constants
+  * @{
+  */
+
+/** @defgroup GPIO_Alternate_function_selection GPIO Alternate Function Selection
+  * @{
+  */
+/**
+  * @brief   AF 0 selection
+  */
+#define GPIO_AF0_RTC_50Hz      ((uint8_t)0x00)  /* RTC_50Hz Alternate Function mapping                       */
+#define GPIO_AF0_MCO1          ((uint8_t)0x00)  /* MCO1 Alternate Function mapping                           */
+#define GPIO_AF0_SWJ           ((uint8_t)0x00)  /* SWJ (SWD and JTAG) Alternate Function mapping             */
+#define GPIO_AF0_LCDBIAS       ((uint8_t)0x00)  /* LCDBIAS Alternate Function mapping                        */
+#define GPIO_AF0_TRACE         ((uint8_t)0x00)  /* TRACE Alternate Function mapping                          */
+#define GPIO_AF0_HDP           ((uint8_t)0x00)  /* HDP Alternate Function mapping                            */
+
+/**
+ * @brief   AF 1 selection
+ */
+#define GPIO_AF1_TIM1          ((uint8_t)0x01)  /* TIM1 Alternate Function mapping */
+#define GPIO_AF1_TIM2          ((uint8_t)0x01)  /* TIM2 Alternate Function mapping */
+#define GPIO_AF1_TIM16         ((uint8_t)0x01)  /* TIM16 Alternate Function mapping */
+#define GPIO_AF1_TIM17         ((uint8_t)0x01)  /* TIM17 Alternate Function mapping */
+#define GPIO_AF1_LPTIM1        ((uint8_t)0x01)  /* LPTIM1 Alternate Function mapping */
+#define GPIO_AF1_MCO2          ((uint8_t)0x01)  /* MCO2 Alternate Function mapping */
+#define GPIO_AF1_RTC           ((uint8_t)0x01)  /* RTC Alternate Function mapping */
+
+/**
+  * @brief   AF 2 selection
+  */
+#define GPIO_AF2_TIM3          ((uint8_t)0x02)  /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM4          ((uint8_t)0x02)  /* TIM4 Alternate Function mapping */
+#define GPIO_AF2_TIM5          ((uint8_t)0x02)  /* TIM5 Alternate Function mapping */
+#define GPIO_AF2_TIM12         ((uint8_t)0x02)  /* TIM12 Alternate Function mapping */
+#define GPIO_AF2_SAI1          ((uint8_t)0x02)  /* SAI1 Alternate Function mapping */
+#define GPIO_AF2_SAI4          ((uint8_t)0x02)  /* SAI4 Alternate Function mapping */
+#define GPIO_AF2_I2C6          ((uint8_t)0x02)  /* I2C6 Alternate Function mapping */
+#define GPIO_AF2_MCO1          ((uint8_t)0x02)  /* MCO1 Alternate Function mapping */
+#define GPIO_AF2_MCO2          ((uint8_t)0x02)  /* MCO2 Alternate Function mapping */
+#define GPIO_AF2_HDP           ((uint8_t)0x02)  /* HDP Alternate Function mapping  */
+/**
+ * @brief   AF 3 selection
+ */
+#define GPIO_AF3_TIM8          ((uint8_t)0x03)  /* TIM8 Alternate Function mapping  */
+#define GPIO_AF3_LPTIM2        ((uint8_t)0x03)  /* LPTIM2 Alternate Function mapping  */
+#define GPIO_AF3_DFSDM1        ((uint8_t)0x03)  /* DFSDM1 Alternate Function mapping  */
+#define GPIO_AF3_I2C2          ((uint8_t)0x03)  /* I2C6 Alternate Function mapping */
+#define GPIO_AF3_LPTIM3        ((uint8_t)0x03)  /* LPTIM3 Alternate Function mapping  */
+#define GPIO_AF3_LPTIM4        ((uint8_t)0x03)  /* LPTIM4 Alternate Function mapping  */
+#define GPIO_AF3_LPTIM5        ((uint8_t)0x03)  /* LPTIM5 Alternate Function mapping  */
+#define GPIO_AF3_SAI4          ((uint8_t)0x03)  /* SAI4 Alternate Function mapping */
+#define GPIO_AF3_SDIO1         ((uint8_t)0x03)  /* SDIO1 Alternate Function mapping */
+
+/**
+ * @brief   AF 4 selection
+ */
+#define GPIO_AF4_I2C1          ((uint8_t)0x04)  /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2          ((uint8_t)0x04)  /* I2C2 Alternate Function mapping */
+#define GPIO_AF4_I2C3          ((uint8_t)0x04)  /* I2C3 Alternate Function mapping */
+#define GPIO_AF4_I2C4          ((uint8_t)0x04)  /* I2C4 Alternate Function mapping */
+#define GPIO_AF4_I2C5          ((uint8_t)0x04)  /* I2C5 Alternate Function mapping */
+#define GPIO_AF4_TIM15         ((uint8_t)0x04)  /* TIM15 Alternate Function mapping */
+#define GPIO_AF4_CEC           ((uint8_t)0x04)  /* CEC Alternate Function mapping */
+#define GPIO_AF4_DFSDM1        ((uint8_t)0x04)  /* DFSDM1  Alternate Function mapping   */
+#define GPIO_AF4_LPTIM2        ((uint8_t)0x04)  /* LPTIM2 Alternate Function mapping  */
+#define GPIO_AF4_SAI4          ((uint8_t)0x04)  /* SAI4 Alternate Function mapping */
+#define GPIO_AF4_USART1        ((uint8_t)0x04)  /* USART1 Alternate Function mapping */
+
+/**
+ * @brief   AF 5 selection
+ */
+#define GPIO_AF5_SPI1          ((uint8_t)0x05)  /* SPI1 Alternate Function mapping   */
+#define GPIO_AF5_SPI2          ((uint8_t)0x05)  /* SPI2 Alternate Function mapping   */
+#define GPIO_AF5_SPI3          ((uint8_t)0x05)  /* SPI3 Alternate Function mapping   */
+#define GPIO_AF5_SPI4          ((uint8_t)0x05)  /* SPI4 Alternate Function mapping   */
+#define GPIO_AF5_SPI5          ((uint8_t)0x05)  /* SPI5 Alternate Function mapping   */
+#define GPIO_AF5_SPI6          ((uint8_t)0x05)  /* SPI6 Alternate Function mapping   */
+#define GPIO_AF5_CEC           ((uint8_t)0x05)  /* CEC  Alternate Function mapping   */
+#define GPIO_AF5_I2C1          ((uint8_t)0x05)  /* I2C1 Alternate Function mapping */
+#define GPIO_AF5_SDIO1         ((uint8_t)0x05)  /* SDIO1 Alternate Function mapping */
+#define GPIO_AF5_SDIO3         ((uint8_t)0x05)  /* SDIO3 Alternate Function mapping */
+
+/**
+ * @brief   AF 6 selection
+ */
+#define GPIO_AF6_SPI3          ((uint8_t)0x06)  /* SPI3 Alternate Function mapping  */
+#define GPIO_AF6_SAI1          ((uint8_t)0x06)  /* SAI1 Alternate Function mapping  */
+#define GPIO_AF6_SAI3          ((uint8_t)0x06)  /* SAI3 Alternate Function mapping  */
+#define GPIO_AF6_SAI4          ((uint8_t)0x06)  /* SAI4 Alternate Function mapping */
+#define GPIO_AF6_I2C4          ((uint8_t)0x06)  /* I2C4 Alternate Function mapping  */
+#define GPIO_AF6_DFSDM1        ((uint8_t)0x06)  /* DFSDM1 Alternate Function mapping */
+#define GPIO_AF6_UART4         ((uint8_t)0x06)  /* UART4 Alternate Function mapping */
+
+/**
+ * @brief   AF 7 selection
+ */
+#define GPIO_AF7_SPI2          ((uint8_t)0x07)  /* SPI2 Alternate Function mapping  */
+#define GPIO_AF7_SPI3          ((uint8_t)0x07)  /* SPI3 Alternate Function mapping  */
+#define GPIO_AF7_SPI6          ((uint8_t)0x07)  /* SPI6 Alternate Function mapping  */
+#define GPIO_AF7_USART1        ((uint8_t)0x07)  /* USART1 Alternate Function mapping     */
+#define GPIO_AF7_USART2        ((uint8_t)0x07)  /* USART2 Alternate Function mapping     */
+#define GPIO_AF7_USART3        ((uint8_t)0x07)  /* USART3 Alternate Function mapping     */
+#define GPIO_AF7_USART6        ((uint8_t)0x07)  /* USART6 Alternate Function mapping     */
+#define GPIO_AF7_UART7         ((uint8_t)0x07)  /* UART7 Alternate Function mapping     */
+
+/**
+ * @brief   AF 8 selection
+ */
+#define GPIO_AF8_SPI6         ((uint8_t)0x08)  /* SPI6 Alternate Function mapping  */
+#define GPIO_AF8_SAI2         ((uint8_t)0x08)  /* SAI2 Alternate Function mapping  */
+#define GPIO_AF8_USART3       ((uint8_t)0x08)  /* USART3 Alternate Function mapping */
+#define GPIO_AF8_UART4        ((uint8_t)0x08)  /* UART4 Alternate Function mapping */
+#define GPIO_AF8_UART5        ((uint8_t)0x08)  /* UART5 Alternate Function mapping */
+#define GPIO_AF8_UART8        ((uint8_t)0x08)  /* UART8 Alternate Function mapping */
+#define GPIO_AF8_SPDIF        ((uint8_t)0x08)  /* SPDIF Alternate Function mapping */
+#define GPIO_AF8_SDIO1        ((uint8_t)0x08)  /* SDIO1 Alternate Function mapping */
+
+/**
+ * @brief   AF 9 selection
+ */
+#define GPIO_AF9_QUADSPI       ((uint8_t)0x09)  /* QUADSPI Alternate Function mapping */
+#if defined (FDCAN1)
+#define GPIO_AF9_FDCAN1        ((uint8_t)0x09)  /* FDCAN1 Alternate Function mapping    */
+#endif
+#if defined (FDCAN2)
+#define GPIO_AF9_FDCAN2        ((uint8_t)0x09)  /* FDCAN2 Alternate Function mapping    */
+#endif
+#define GPIO_AF9_TIM13         ((uint8_t)0x09)  /* TIM13 Alternate Function mapping   */
+#define GPIO_AF9_TIM14         ((uint8_t)0x09)  /* TIM14 Alternate Function mapping   */
+#define GPIO_AF9_SDIO2         ((uint8_t)0x09)  /* SDIO2 Alternate Function mapping   */
+#define GPIO_AF9_LCD           ((uint8_t)0x09)  /* LCD Alternate Function mapping   */
+#define GPIO_AF9_SPDIF         ((uint8_t)0x09)  /* SPDIF Alternate Function mapping   */
+#define GPIO_AF9_SDIO3         ((uint8_t)0x09)  /* SDIO3 Alternate Function mapping   */
+#define GPIO_AF9_SDIO2         ((uint8_t)0x09)  /* SDIO3 Alternate Function mapping   */
+
+/**
+ * @brief   AF 10 selection
+ */
+#define GPIO_AF10_QUADSPI       ((uint8_t)0xA)  /* QUADSPI Alternate Function mapping */
+#define GPIO_AF10_SAI2          ((uint8_t)0xA)  /* SAI2 Alternate Function mapping */
+#define GPIO_AF10_SAI4          ((uint8_t)0xA)  /* SAI4 Alternate Function mapping */
+#define GPIO_AF10_SDIO2         ((uint8_t)0xA)  /* SDIO2 Alternate Function mapping */
+#define GPIO_AF10_SDIO3         ((uint8_t)0xA)  /* SDIO3 Alternate Function mapping */
+#define GPIO_AF10_OTG2_HS       ((uint8_t)0xA)  /* OTG2_HS Alternate Function mapping */
+#define GPIO_AF10_OTG1_FS       ((uint8_t)0xA)  /* OTG1_FS Alternate Function mapping */
+
+/**
+ * @brief   AF 11 selection
+ */
+#define GPIO_AF11_DFSDM1        ((uint8_t)0x0B)  /* DFSDM1 Alternate Function mapping */
+#define GPIO_AF11_QUADSPI       ((uint8_t)0x0B)  /* QUADSPI Alternate Function mapping */
+#define GPIO_AF11_ETH           ((uint8_t)0x0B)  /* ETH Alternate Function mapping */
+#if defined (DSI)
+#define GPIO_AF11_DSI           ((uint8_t)0x0B)  /* DSI Alternate Function mapping */
+#endif
+#define GPIO_AF11_SDIO1         ((uint8_t)0x0B)  /* SDIO1 Alternate Function mapping */
+
+/**
+ * @brief   AF 12 selection
+ */
+#define GPIO_AF12_UART5         ((uint8_t)0xC)  /* UART5 Alternate Function mapping */
+#define GPIO_AF12_FMC           ((uint8_t)0xC)  /* FMC Alternate Function mapping     */
+#define GPIO_AF12_SDIO1         ((uint8_t)0xC)  /* SDIO1 Alternate Function mapping  */
+#define GPIO_AF12_MDIOS         ((uint8_t)0xC)  /* MDIOS Alternate Function mapping   */
+#define GPIO_AF12_SAI4          ((uint8_t)0xC)  /* SAI4 Alternate Function mapping */
+#define GPIO_AF12_SDIO1         ((uint8_t)0xC)  /* SAI4 Alternate Function mapping */
+
+/**
+ * @brief   AF 13 selection
+ */
+#define GPIO_AF13_UART7         ((uint8_t)0x0D)   /* UART7 Alternate Function mapping */
+#define GPIO_AF13_DCMI          ((uint8_t)0x0D)   /* DCMI Alternate Function mapping */
+#define GPIO_AF13_LCD           ((uint8_t)0x0D)   /* LCD Alternate Function mapping */
+#if defined (DSI)
+#define GPIO_AF13_DSI           ((uint8_t)0x0D)   /* DSI Alternate Function mapping */
+#endif
+#define GPIO_AF13_RNG           ((uint8_t)0x0D)   /* RNG Alternate Function mapping */
+
+
+/**
+ * @brief   AF 14 selection
+ */
+#define GPIO_AF14_UART5        ((uint8_t)0x0E)   /* UART5 Alternate Function mapping */
+#define GPIO_AF14_LCD          ((uint8_t)0x0E)   /* LCD Alternate Function mapping */
+
+/**
+  * @brief   AF 15 selection
+  */
+#define GPIO_AF15_EVENTOUT      ((uint8_t)0x0F)  /* EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF)   ((AF) <= (uint8_t)0x0F)
+
+
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup GPIOEx_Private_Macros GPIO Private Macros
+  * @{
+  */
+/** @defgroup GPIOEx_Get_Port_Index GPIO Get Port Index
+  * @{
+  */
+#define GPIO_GET_INDEX(__GPIOx__)   (uint8_t)(((__GPIOx__) == (GPIOA))? 0U :\
+                                              ((__GPIOx__) == (GPIOB))? 1U :\
+                                              ((__GPIOx__) == (GPIOC))? 2U :\
+                                              ((__GPIOx__) == (GPIOD))? 3U :\
+                                              ((__GPIOx__) == (GPIOE))? 4U :\
+                                              ((__GPIOx__) == (GPIOF))? 5U :\
+                                              ((__GPIOx__) == (GPIOG))? 6U :\
+                                              ((__GPIOx__) == (GPIOH))? 7U :\
+                                              ((__GPIOx__) == (GPIOI))? 8U :\
+                                              ((__GPIOx__) == (GPIOJ))? 9U :\
+                                              ((__GPIOx__) == (GPIOK))? 10U :\
+                                              ((__GPIOx__) == (GPIOZ))? 11U : 25U)
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+
+/* Exported functions --------------------------------------------------------*/ 
+/** @addtogroup GPIOEx_Exported_Functions GPIO Extended Exported Functions
+  * @{
+  */
+
+/** @addtogroup GPIOEx_Exported_Functions_Group1 Extended Peripheral Control functions 
+ * @{
+ */
+
+void                HAL_GPIOEx_SecurePin(GPIO_TypeDef  *GPIOx, uint16_t GPIO_Pin);
+void                HAL_GPIOEx_NonSecurePin(GPIO_TypeDef  *GPIOx, uint16_t GPIO_Pin);
+
+
+GPIO_PinState       HAL_GPIOEx_IsPinSecured(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32MP1xx_HAL_GPIO_EX_H */

meta-st/meta-st-stm32mp-addons/mx/stm32mp157d-vrpmdv-mon-mx/Drivers/STM32MP1xx_HAL_Driver/Inc/stm32mp1xx_hal_hsem.h

@@ -0,0 +1,207 @@
+/**
+  ******************************************************************************
+  * @file    stm32mp1xx_hal_hsem.h
+  * @author  MCD Application Team
+  * @brief   Header file of HSEM HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32MP1xx_HAL_HSEM_H
+#define STM32MP1xx_HAL_HSEM_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32mp1xx_hal_def.h"
+
+/** @addtogroup STM32MP1xx_HAL_Driver
+   * @{
+   */
+
+/** @addtogroup HSEM
+   * @{
+   */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup HSEM_Exported_Macros HSEM Exported Macros
+  * @{
+  */
+
+/**
+  * @brief  SemID to mask helper Macro.
+  * @param  __SEMID__: semaphore ID from 0 to 31
+  * @retval Semaphore Mask.
+  */
+#define __HAL_HSEM_SEMID_TO_MASK(__SEMID__) (1 << (__SEMID__))
+
+/**
+  * @brief  Enables the specified HSEM interrupts.
+  * @param  __SEM_MASK__: semaphores Mask
+  * @retval None.
+  */
+#if defined(DUAL_CORE)
+#define __HAL_HSEM_ENABLE_IT(__SEM_MASK__) ((((SCB->CPUID & 0x000000F0) >> 4 )== 0x7) ? \
+                                            (HSEM->C1IER |= (__SEM_MASK__)) : \
+                                            (HSEM->C2IER |= (__SEM_MASK__)))
+#else
+#define __HAL_HSEM_ENABLE_IT(__SEM_MASK__) (HSEM->IER |= (__SEM_MASK__))
+#endif /* DUAL_CORE */
+/**
+  * @brief  Disables the specified HSEM interrupts.
+  * @param  __SEM_MASK__: semaphores Mask
+  * @retval None.
+  */
+#if defined(DUAL_CORE)
+#define __HAL_HSEM_DISABLE_IT(__SEM_MASK__) ((((SCB->CPUID & 0x000000F0) >> 4 )== 0x7) ? \
+                                             (HSEM->C1IER &= ~(__SEM_MASK__)) :       \
+                                             (HSEM->C2IER &= ~(__SEM_MASK__)))
+#else
+#define __HAL_HSEM_DISABLE_IT(__SEM_MASK__) (HSEM->IER &= ~(__SEM_MASK__))
+#endif /* DUAL_CORE */
+
+/**
+  * @brief  Checks whether interrupt has occurred or not for semaphores specified by a mask.
+  * @param  __SEM_MASK__: semaphores Mask
+  * @retval semaphores Mask : Semaphores where an interrupt occurred.
+  */
+#if defined(DUAL_CORE)
+#define __HAL_HSEM_GET_IT(__SEM_MASK__) ((((SCB->CPUID & 0x000000F0) >> 4 )== 0x7) ? \
+                                         ((__SEM_MASK__) & HSEM->C1MISR) :        \
+                                         ((__SEM_MASK__) & HSEM->C2MISR1))
+#else
+#define __HAL_HSEM_GET_IT(__SEM_MASK__) ((__SEM_MASK__) & HSEM->MISR)
+#endif /* DUAL_CORE */
+
+/**
+  * @brief  Get the semaphores release status flags.
+  * @param  __SEM_MASK__: semaphores Mask
+  * @retval semaphores Mask : Semaphores where Release flags rise.
+  */
+#if defined(DUAL_CORE)
+#define __HAL_HSEM_GET_FLAG(__SEM_MASK__) ((((SCB->CPUID & 0x000000F0) >> 4 )== 0x7) ? \
+                                           (__SEM_MASK__) & HSEM->C1ISR :           \
+                                           (__SEM_MASK__) & HSEM->C2ISR)
+#else
+#define __HAL_HSEM_GET_FLAG(__SEM_MASK__) ((__SEM_MASK__) & HSEM->ISR)
+#endif /* DUAL_CORE */
+
+/**
+  * @brief  Clears the HSEM Interrupt flags.
+  * @param  __SEM_MASK__: semaphores Mask
+  * @retval None.
+  */
+#if defined(DUAL_CORE)
+#define __HAL_HSEM_CLEAR_FLAG(__SEM_MASK__) ((((SCB->CPUID & 0x000000F0) >> 4 )== 0x7) ? \
+                                             (HSEM->C1ICR |= (__SEM_MASK__)) :        \
+                                             (HSEM->C2ICR |= (__SEM_MASK__)))
+#else
+#define __HAL_HSEM_CLEAR_FLAG(__SEM_MASK__) (HSEM->ICR |= (__SEM_MASK__))
+#endif /* DUAL_CORE */
+
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup HSEM_Exported_Functions HSEM Exported Functions
+  * @{
+  */
+
+/** @addtogroup HSEM_Exported_Functions_Group1 Take and Release functions
+  * @brief    HSEM Take and Release functions
+  * @{
+  */
+
+/* HSEM semaphore take (lock) using 2-Step  method ****************************/
+HAL_StatusTypeDef  HAL_HSEM_Take(uint32_t SemID, uint32_t ProcessID);
+/* HSEM semaphore fast take (lock) using 1-Step  method ***********************/
+HAL_StatusTypeDef  HAL_HSEM_FastTake(uint32_t SemID);
+/* HSEM Check semaphore state Taken or not   **********************************/
+uint32_t HAL_HSEM_IsSemTaken(uint32_t SemID);
+/* HSEM Release  **************************************************************/
+void  HAL_HSEM_Release(uint32_t SemID, uint32_t ProcessID);
+/* HSEM Release All************************************************************/
+void HAL_HSEM_ReleaseAll(uint32_t Key, uint32_t CoreID);
+
+/**
+  * @}
+  */
+
+/** @addtogroup HSEM_Exported_Functions_Group2 HSEM Set and Get Key functions
+  * @brief    HSEM Set and Get Key functions.
+  * @{
+  */
+/* HSEM Set Clear Key *********************************************************/
+void  HAL_HSEM_SetClearKey(uint32_t Key);
+/* HSEM Get Clear Key *********************************************************/
+uint32_t HAL_HSEM_GetClearKey(void);
+/**
+  * @}
+  */
+
+/** @addtogroup HSEM_Exported_Functions_Group3
+  * @brief   HSEM Notification functions
+  * @{
+  */
+/* HSEM Activate HSEM Notification (When a semaphore is released) ) *****************/
+void HAL_HSEM_ActivateNotification(uint32_t SemMask);
+/* HSEM Deactivate HSEM Notification (When a semaphore is released)  ****************/
+void HAL_HSEM_DeactivateNotification(uint32_t SemMask);
+/* HSEM Free Callback (When a semaphore is released)  *******************************/
+void HAL_HSEM_FreeCallback(uint32_t SemMask);
+/* HSEM IRQ Handler  **********************************************************/
+void HAL_HSEM_IRQHandler(void);
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup HSEM_Private_Macros HSEM Private Macros
+  * @{
+  */
+
+#define IS_HSEM_SEMID(__SEMID__) ((__SEMID__) <= HSEM_SEMID_MAX )
+
+#define IS_HSEM_PROCESSID(__PROCESSID__) ((__PROCESSID__) <= HSEM_PROCESSID_MAX )
+
+#define IS_HSEM_KEY(__KEY__) ((__KEY__) <= HSEM_CLEAR_KEY_MAX )
+
+#define IS_HSEM_COREID(__COREID__) (((__COREID__) == HSEM_CPU1_COREID) || \
+                                    ((__COREID__) == HSEM_CPU2_COREID))
+
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32MP1xx_HAL_HSEM_H */

meta-st/meta-st-stm32mp-addons/mx/stm32mp157d-vrpmdv-mon-mx/Drivers/STM32MP1xx_HAL_Driver/Inc/stm32mp1xx_hal_ipcc.h

@@ -0,0 +1,289 @@
+/**
+  ******************************************************************************
+  * @file    stm32mp1xx_hal_ipcc.h
+  * @author  MCD Application Team
+  * @brief   Header file of Mailbox HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32MP1xx_HAL_IPCC_H
+#define STM32MP1xx_HAL_IPCC_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32mp1xx_hal_def.h"
+
+
+/** @addtogroup STM32MP1xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup IPCC IPCC
+  * @brief IPCC HAL module driver
+  * @{
+  */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup IPCC_Exported_Constants IPCC Exported Constants
+  * @{
+  */
+
+/** @defgroup IPCC_Channel IPCC Channel
+  * @{
+  */
+#define IPCC_CHANNEL_1 0x00000000U
+#define IPCC_CHANNEL_2 0x00000001U
+#define IPCC_CHANNEL_3 0x00000002U
+#define IPCC_CHANNEL_4 0x00000003U
+#define IPCC_CHANNEL_5 0x00000004U
+#define IPCC_CHANNEL_6 0x00000005U
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup IPCC_Exported_Types IPCC Exported Types
+  * @{
+  */
+
+/**
+  * @brief HAL IPCC State structures definition
+  */
+typedef enum
+{
+  HAL_IPCC_STATE_RESET             = 0x00U,  /*!< IPCC not yet initialized or disabled  */
+  HAL_IPCC_STATE_READY             = 0x01U,  /*!< IPCC initialized and ready for use    */
+  HAL_IPCC_STATE_BUSY              = 0x02U   /*!< IPCC internal processing is ongoing   */
+} HAL_IPCC_StateTypeDef;
+
+/**
+  * @brief  IPCC channel direction structure definition
+  */
+typedef enum
+{
+  IPCC_CHANNEL_DIR_TX  = 0x00U,  /*!< Channel direction Tx is used by an MCU to transmit */
+  IPCC_CHANNEL_DIR_RX  = 0x01U   /*!< Channel direction Rx is used by an MCU to receive */
+} IPCC_CHANNELDirTypeDef;
+
+/**
+  * @brief  IPCC channel status structure definition
+  */
+typedef enum
+{
+  IPCC_CHANNEL_STATUS_FREE       = 0x00U,  /*!< Means that a new msg can be posted on that channel */
+  IPCC_CHANNEL_STATUS_OCCUPIED   = 0x01U   /*!< An MCU has posted a msg the other MCU hasn't retrieved */
+} IPCC_CHANNELStatusTypeDef;
+
+/**
+  * @brief  IPCC handle structure definition
+  */
+typedef struct __IPCC_HandleTypeDef
+{
+  IPCC_TypeDef                   *Instance;     /*!< IPCC registers base address */
+  void (* ChannelCallbackRx[IPCC_CHANNEL_NUMBER])(struct __IPCC_HandleTypeDef *hipcc, uint32_t ChannelIndex, IPCC_CHANNELDirTypeDef ChannelDir);                            /*!< Rx Callback registration table */
+  void (* ChannelCallbackTx[IPCC_CHANNEL_NUMBER])(struct __IPCC_HandleTypeDef *hipcc, uint32_t ChannelIndex, IPCC_CHANNELDirTypeDef ChannelDir);                            /*!< Tx Callback registration table */
+  uint32_t                       callbackRequest; /*!< Store information about callback notification by channel */
+  __IO HAL_IPCC_StateTypeDef      State;         /*!< IPCC State: initialized or not */
+} IPCC_HandleTypeDef;
+
+/**
+  * @brief  IPCC callback typedef
+  */
+typedef void ChannelCb(IPCC_HandleTypeDef *hipcc, uint32_t ChannelIndex, IPCC_CHANNELDirTypeDef ChannelDir);
+
+/**
+  * @}
+  */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup IPCC_Exported_Macros IPCC Exported Macros
+  * @{
+  */
+
+/**
+  * @brief  Enable the specified interrupt.
+  * @param  __HANDLE__ specifies the IPCC Handle
+  * @param  __CHDIRECTION__ specifies the channels Direction
+  *          This parameter can be one of the following values:
+  *            @arg @ref IPCC_CHANNEL_DIR_TX Transmit channel free interrupt enable
+  *            @arg @ref IPCC_CHANNEL_DIR_RX Receive channel occupied interrupt enable
+  */
+#if defined(CORE_CM4)
+#define __HAL_IPCC_ENABLE_IT(__HANDLE__, __CHDIRECTION__) \
+            (((__CHDIRECTION__) == IPCC_CHANNEL_DIR_RX) ? \
+                ((__HANDLE__)->Instance->C2CR |= IPCC_C2CR_RXOIE) : \
+                ((__HANDLE__)->Instance->C2CR |= IPCC_C2CR_TXFIE))
+#else
+#define __HAL_IPCC_ENABLE_IT(__HANDLE__, __CHDIRECTION__) \
+            (((__CHDIRECTION__) == IPCC_CHANNEL_DIR_RX) ? \
+                ((__HANDLE__)->Instance->C1CR |= IPCC_C1CR_RXOIE) : \
+                ((__HANDLE__)->Instance->C1CR |= IPCC_C1CR_TXFIE))
+#endif
+
+/**
+  * @brief  Disable the specified interrupt.
+  * @param  __HANDLE__ specifies the IPCC Handle
+  * @param  __CHDIRECTION__ specifies the channels Direction
+  *          This parameter can be one of the following values:
+  *            @arg @ref IPCC_CHANNEL_DIR_TX Transmit channel free interrupt enable
+  *            @arg @ref IPCC_CHANNEL_DIR_RX Receive channel occupied interrupt enable
+  */
+#if defined(CORE_CM4)
+#define __HAL_IPCC_DISABLE_IT(__HANDLE__, __CHDIRECTION__) \
+            (((__CHDIRECTION__) == IPCC_CHANNEL_DIR_RX) ? \
+                ((__HANDLE__)->Instance->C2CR &= ~IPCC_C2CR_RXOIE) : \
+                ((__HANDLE__)->Instance->C2CR &= ~IPCC_C2CR_TXFIE))
+#else
+#define __HAL_IPCC_DISABLE_IT(__HANDLE__, __CHDIRECTION__) \
+            (((__CHDIRECTION__) == IPCC_CHANNEL_DIR_RX) ? \
+                ((__HANDLE__)->Instance->C1CR &= ~IPCC_C1CR_RXOIE) : \
+                ((__HANDLE__)->Instance->C1CR &= ~IPCC_C1CR_TXFIE))
+#endif
+
+/**
+  * @brief  Mask the specified interrupt.
+  * @param  __HANDLE__ specifies the IPCC Handle
+  * @param  __CHDIRECTION__ specifies the channels Direction
+  *          This parameter can be one of the following values:
+  *            @arg @ref IPCC_CHANNEL_DIR_TX Transmit channel free interrupt enable
+  *            @arg @ref IPCC_CHANNEL_DIR_RX Receive channel occupied interrupt enable
+  * @param  __CHINDEX__ specifies the channels number:
+  *         This parameter can be one of the following values:
+  *            @arg IPCC_CHANNEL_1: IPCC Channel 1
+  *            @arg IPCC_CHANNEL_2: IPCC Channel 2
+  *            @arg IPCC_CHANNEL_3: IPCC Channel 3
+  *            @arg IPCC_CHANNEL_4: IPCC Channel 4
+  *            @arg IPCC_CHANNEL_5: IPCC Channel 5
+  *            @arg IPCC_CHANNEL_6: IPCC Channel 6
+  */
+#if defined(CORE_CM4)
+#define __HAL_IPCC_MASK_CHANNEL_IT(__HANDLE__, __CHDIRECTION__, __CHINDEX__) \
+            (((__CHDIRECTION__) == IPCC_CHANNEL_DIR_RX) ? \
+                ((__HANDLE__)->Instance->C2MR |= (IPCC_C1MR_CH1OM_Msk << (__CHINDEX__))) : \
+                ((__HANDLE__)->Instance->C2MR |= (IPCC_C1MR_CH1FM_Msk << (__CHINDEX__))))
+#else
+#define __HAL_IPCC_MASK_CHANNEL_IT(__HANDLE__, __CHDIRECTION__, __CHINDEX__) \
+            (((__CHDIRECTION__) == IPCC_CHANNEL_DIR_RX) ? \
+                ((__HANDLE__)->Instance->C1MR |= (IPCC_C1MR_CH1OM_Msk << (__CHINDEX__))) : \
+                ((__HANDLE__)->Instance->C1MR |= (IPCC_C1MR_CH1FM_Msk << (__CHINDEX__))))
+#endif
+
+/**
+  * @brief  Unmask the specified interrupt.
+  * @param  __HANDLE__ specifies the IPCC Handle
+  * @param  __CHDIRECTION__ specifies the channels Direction
+  *          This parameter can be one of the following values:
+  *            @arg @ref IPCC_CHANNEL_DIR_TX Transmit channel free interrupt enable
+  *            @arg @ref IPCC_CHANNEL_DIR_RX Receive channel occupied interrupt enable
+  * @param  __CHINDEX__ specifies the channels number:
+  *         This parameter can be one of the following values:
+  *            @arg IPCC_CHANNEL_1: IPCC Channel 1
+  *            @arg IPCC_CHANNEL_2: IPCC Channel 2
+  *            @arg IPCC_CHANNEL_3: IPCC Channel 3
+  *            @arg IPCC_CHANNEL_4: IPCC Channel 4
+  *            @arg IPCC_CHANNEL_5: IPCC Channel 5
+  *            @arg IPCC_CHANNEL_6: IPCC Channel 6
+  */
+#if defined(CORE_CM4)
+#define __HAL_IPCC_UNMASK_CHANNEL_IT(__HANDLE__, __CHDIRECTION__, __CHINDEX__) \
+            (((__CHDIRECTION__) == IPCC_CHANNEL_DIR_RX) ? \
+                ((__HANDLE__)->Instance->C2MR &= ~(IPCC_C1MR_CH1OM_Msk << (__CHINDEX__))) : \
+                ((__HANDLE__)->Instance->C2MR &= ~(IPCC_C1MR_CH1FM_Msk << (__CHINDEX__))))
+#else
+#define __HAL_IPCC_UNMASK_CHANNEL_IT(__HANDLE__, __CHDIRECTION__, __CHINDEX__) \
+            (((__CHDIRECTION__) == IPCC_CHANNEL_DIR_RX) ? \
+                ((__HANDLE__)->Instance->C1MR &= ~(IPCC_C1MR_CH1OM_Msk << (__CHINDEX__))) : \
+                ((__HANDLE__)->Instance->C1MR &= ~(IPCC_C1MR_CH1FM_Msk << (__CHINDEX__))))
+#endif
+
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup IPCC_Exported_Functions IPCC Exported Functions
+  * @{
+  */
+
+/* Initialization and de-initialization functions *******************************/
+/** @defgroup IPCC_Exported_Functions_Group1 Initialization and deinitialization functions
+ *  @{
+ */
+HAL_StatusTypeDef HAL_IPCC_Init(IPCC_HandleTypeDef *hipcc);
+HAL_StatusTypeDef HAL_IPCC_DeInit(IPCC_HandleTypeDef *hipcc);
+void HAL_IPCC_MspInit(IPCC_HandleTypeDef *hipcc);
+void HAL_IPCC_MspDeInit(IPCC_HandleTypeDef *hipcc);
+/**
+  * @}
+  */
+
+/** @defgroup IPCC_Exported_Functions_Group2 Communication functions
+ *  @{
+ */
+/* IO operation functions  *****************************************************/
+HAL_StatusTypeDef HAL_IPCC_ActivateNotification(IPCC_HandleTypeDef *hipcc, uint32_t ChannelIndex, IPCC_CHANNELDirTypeDef ChannelDir, ChannelCb cb);
+HAL_StatusTypeDef HAL_IPCC_DeActivateNotification(IPCC_HandleTypeDef *hipcc, uint32_t ChannelIndex, IPCC_CHANNELDirTypeDef ChannelDir);
+IPCC_CHANNELStatusTypeDef HAL_IPCC_GetChannelStatus(IPCC_HandleTypeDef const *const hipcc, uint32_t ChannelIndex, IPCC_CHANNELDirTypeDef ChannelDir);
+HAL_StatusTypeDef HAL_IPCC_NotifyCPU(IPCC_HandleTypeDef const *const hipcc, uint32_t ChannelIndex, IPCC_CHANNELDirTypeDef ChannelDir);
+/**
+  * @}
+  */
+
+/** @defgroup IPCC_Exported_Functions_Group3 Peripheral State and Error functions
+ *  @{
+ */
+/* Peripheral State and Error functions ****************************************/
+HAL_IPCC_StateTypeDef HAL_IPCC_GetState(IPCC_HandleTypeDef const *const hipcc);
+/**
+  * @}
+  */
+
+/** @defgroup IPCC_IRQ_Handler_and_Callbacks Peripheral IRQ Handler and Callbacks
+ *  @{
+ */
+/* IRQHandler and Callbacks used in non blocking modes  ************************/
+void HAL_IPCC_TX_IRQHandler(IPCC_HandleTypeDef   *const hipcc);
+void HAL_IPCC_RX_IRQHandler(IPCC_HandleTypeDef *const hipcc);
+void HAL_IPCC_TxCallback(IPCC_HandleTypeDef *hipcc, uint32_t ChannelIndex, IPCC_CHANNELDirTypeDef ChannelDir);
+void HAL_IPCC_RxCallback(IPCC_HandleTypeDef *hipcc, uint32_t ChannelIndex, IPCC_CHANNELDirTypeDef ChannelDir);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32MP1xx_HAL_IPCC_H */
+

meta-st/meta-st-stm32mp-addons/mx/stm32mp157d-vrpmdv-mon-mx/Drivers/STM32MP1xx_HAL_Driver/Inc/stm32mp1xx_hal_mdma.h

@@ -0,0 +1,860 @@
+/**
+  ******************************************************************************
+  * @file    stm32mp1xx_hal_mdma.h
+  * @author  MCD Application Team
+  * @brief   Header file of DMA HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32MP1xx_HAL_MDMA_H
+#define STM32MP1xx_HAL_MDMA_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32mp1xx_hal_def.h"
+
+/** @addtogroup STM32MP1xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup MDMA
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup MDMA_Exported_Types MDMA Exported Types
+  * @brief    MDMA Exported Types
+  * @{
+  */
+
+/**
+  * @brief  MDMA Configuration Structure definition
+  */
+typedef struct
+{
+
+  uint32_t Request;                 /*!< Specifies the MDMA request.
+                                        This parameter can be a value of @ref MDMA_Request_selection*/
+
+  uint32_t TransferTriggerMode;     /*!< Specifies the Trigger Transfer mode : each request triggers a :
+                                         a buffer transfer, a block transfer, a repeated block transfer or a linked list transfer
+                                         This parameter can be a value of @ref MDMA_Transfer_TriggerMode  */
+
+  uint32_t Priority;                 /*!< Specifies the software priority for the MDMAy channelx.
+                                         This parameter can be a value of @ref MDMA_Priority_level */
+
+  uint32_t SecureMode;               /*!< Specifies if the MDMA master transactions are done in secure mode.
+                                         This parameter can be a value of @ref MDMA_Secure_Mode */
+
+  uint32_t Endianness;                /*!< Specifies if the MDMA transactions preserve the Little endianness.
+                                         This parameter can be a value of @ref MDMA_Endianness */
+
+  uint32_t SourceInc;                /*!< Specifies if the Source increment mode .
+                                         This parameter can be a value of @ref MDMA_Source_increment_mode */
+
+  uint32_t DestinationInc;           /*!< Specifies if the Destination increment mode .
+                                         This parameter can be a value of @ref MDMA_Destination_increment_mode */
+
+  uint32_t SourceDataSize;           /*!< Specifies the source data size.
+                                         This parameter can be a value of @ref MDMA_Source_data_size */
+
+  uint32_t DestDataSize;             /*!< Specifies the destination data size.
+                                          This parameter can be a value of @ref MDMA_Destination_data_size */
+
+
+  uint32_t DataAlignment;            /*!< Specifies the source to destination Memory data packing/padding mode.
+                                            This parameter can be a value of @ref MDMA_data_Alignment */
+
+  uint32_t BufferTransferLength;      /*!< Specifies the buffer Transfer Length (number of bytes),
+                                          this is the number of bytes to be transferred in a single transfer (1 byte to 128 bytes)*/
+
+  uint32_t SourceBurst;              /*!< Specifies the Burst transfer configuration for the source memory transfers.
+                                         It specifies the amount of data to be transferred in a single non interruptable
+                                         transaction.
+                                         This parameter can be a value of @ref MDMA_Source_burst
+                                         @note : the burst may be FIXED/INCR based on SourceInc value ,
+                                         the BURST must be programmed as to ensure that the burst size will be lower than than
+                                         BufferTransferLength */
+
+  uint32_t DestBurst;                 /*!< Specifies the Burst transfer configuration for the destination memory transfers.
+                                           It specifies the amount of data to be transferred in a single non interruptable
+                                           transaction.
+                                           This parameter can be a value of @ref MDMA_Destination_burst
+                                           @note : the burst may be FIXED/INCR based on DestinationInc value ,
+                                           the BURST must be programmed as to ensure that the burst size will be lower than than
+                                           BufferTransferLength */
+
+  int32_t SourceBlockAddressOffset;   /*!< this field specifies the Next block source address offset
+                                           signed value : if > 0 then  increment the next block source Address by offset from where the last block ends
+                                                          if < 0 then  decrement the next block source Address by offset from where the last block ends
+                                                          if == 0, the next block source address starts from where the last block ends
+                                       */
+
+
+  int32_t DestBlockAddressOffset;      /*!< this field specifies the Next block destination address offset
+                                           signed value : if > 0 then  increment the next block destination Address by offset from where the last block ends
+                                                          if < 0 then  decrement the next block destination Address by offset from where the last block ends
+                                                          if == 0, the next block destination address starts from where the last block ends
+                                       */
+
+}MDMA_InitTypeDef;
+
+/**
+  * @brief  HAL MDMA linked list node structure definition
+  * @note   The Linked list node allows to define a new MDMA configuration
+  *         (CTCR ,CBNDTR ,CSAR ,CDAR ,CBRUR, CLAR, CTBR, CMAR and CMDR registers).
+  *         When CLAR register is configured to a non NULL value , each time a transfer ends,
+  *         a new configuration (linked list node) is automatically loaded from the address given in CLAR register.
+  */
+typedef struct
+{
+  __IO uint32_t CTCR;     /*!< New CTCR register configuration for the given MDMA linked list node   */
+  __IO uint32_t CBNDTR;   /*!< New CBNDTR register configuration for the given MDMA linked list node */
+  __IO uint32_t CSAR;     /*!< New CSAR register configuration for the given MDMA linked list node   */
+  __IO uint32_t CDAR;     /*!< New CDAR register configuration for the given MDMA linked list node   */
+  __IO uint32_t CBRUR;    /*!< New CBRUR register configuration for the given MDMA linked list node  */
+  __IO uint32_t CLAR;     /*!< New CLAR register configuration for the given MDMA linked list node   */
+  __IO uint32_t CTBR;     /*!< New CTBR register configuration for the given MDMA linked list node   */
+  __IO uint32_t Reserved; /*!< Reserved register                                                     */
+  __IO uint32_t CMAR;     /*!< New CMAR register configuration for the given MDMA linked list node   */
+  __IO uint32_t CMDR;     /*!< New CMDR register configuration for the given MDMA linked list node   */
+
+}MDMA_LinkNodeTypeDef;
+
+/**
+  * @brief  HAL MDMA linked list node configuration structure definition
+  * @note   used with HAL_MDMA_LinkedList_CreateNode function
+  */
+typedef struct
+{
+  MDMA_InitTypeDef Init;            /*!< configuration of the specified MDMA Linked List Node    */
+  uint32_t         SrcAddress;      /*!< The source memory address for the Linked list Node      */
+  uint32_t         DstAddress;      /*!< The destination memory address for the Linked list Node */
+  uint32_t         BlockDataLength; /*!< The data length of a block in bytes                     */
+  uint32_t         BlockCount;      /*!< The number of blocks to be transferred                  */
+
+  uint32_t PostRequestMaskAddress;  /*!< specifies the address to be updated (written) with PostRequestMaskData after a request is served.
+                                         PostRequestMaskAddress and PostRequestMaskData could be used to automatically clear a peripheral flag when the request is served  */
+
+  uint32_t PostRequestMaskData;     /*!< specifies the value to be written to PostRequestMaskAddress after a request is served.
+                                         PostRequestMaskAddress and PostRequestMaskData could be used to automatically clear a peripheral flag when the request is served  */
+
+
+}MDMA_LinkNodeConfTypeDef;
+
+
+/**
+  * @brief  HAL MDMA State structure definition
+  */
+typedef enum
+{
+  HAL_MDMA_STATE_RESET               = 0x00U,  /*!< MDMA not yet initialized or disabled */
+  HAL_MDMA_STATE_READY               = 0x01U,  /*!< MDMA initialized and ready for use   */
+  HAL_MDMA_STATE_BUSY                = 0x02U,  /*!< MDMA process is ongoing              */
+  HAL_MDMA_STATE_ERROR               = 0x03U,  /*!< MDMA error state                     */
+  HAL_MDMA_STATE_ABORT               = 0x04U,  /*!< MDMA Abort state                     */
+  HAL_MDMA_STATE_TIMEOUT             = 0x05U,  /*!< MDMA timeout state                   */
+
+}HAL_MDMA_StateTypeDef;
+
+/**
+  * @brief  HAL MDMA Level Complete structure definition
+  */
+typedef enum
+{
+  HAL_MDMA_FULL_TRANSFER         = 0x00U,   /*!< Full transfer         */
+  HAL_MDMA_BUFFER_TRANSFER       = 0x01U,   /*!< Buffer Transfer       */
+  HAL_MDMA_BLOCK_TRANSFER        = 0x02U,   /*!< Block Transfer        */
+  HAL_MDMA_REPEAT_BLOCK_TRANSFER = 0x03U    /*!< repeat block Transfer */
+
+}HAL_MDMA_LevelCompleteTypeDef;
+
+/**
+  * @brief  HAL MDMA Callbacks IDs structure definition
+  */
+typedef enum
+{
+  HAL_MDMA_XFER_CPLT_CB_ID          = 0x00U,    /*!< Full transfer           */
+  HAL_MDMA_XFER_BUFFERCPLT_CB_ID    = 0x01U,    /*!< Buffer Transfer         */
+  HAL_MDMA_XFER_BLOCKCPLT_CB_ID     = 0x02U,    /*!< Block Transfer          */
+  HAL_MDMA_XFER_REPBLOCKCPLT_CB_ID  = 0x03U,    /*!< Repeated Block Transfer */
+  HAL_MDMA_XFER_ERROR_CB_ID         = 0x04U,    /*!< Error                   */
+  HAL_MDMA_XFER_ABORT_CB_ID         = 0x05U,    /*!< Abort                   */
+  HAL_MDMA_XFER_ALL_CB_ID           = 0x06U     /*!< All                     */
+
+}HAL_MDMA_CallbackIDTypeDef;
+
+
+/**
+  * @brief  MDMA handle Structure definition
+  */
+typedef struct __MDMA_HandleTypeDef
+{
+  MDMA_Channel_TypeDef *Instance;                                                              /*!< Register base address                  */
+
+  MDMA_InitTypeDef      Init;                                                                  /*!< MDMA communication parameters          */
+
+  HAL_LockTypeDef       Lock;                                                                  /*!< MDMA locking object                    */
+
+  __IO HAL_MDMA_StateTypeDef  State;                                                           /*!< MDMA transfer state                    */
+
+  void                  *Parent;                                                               /*!< Parent object state                    */
+
+  void                  (* XferCpltCallback)( struct __MDMA_HandleTypeDef * hmdma);            /*!< MDMA transfer complete callback        */
+
+  void                  (* XferBufferCpltCallback)( struct __MDMA_HandleTypeDef * hmdma);      /*!< MDMA buffer transfer complete callback */
+
+  void                  (* XferBlockCpltCallback)( struct __MDMA_HandleTypeDef * hmdma);       /*!< MDMA block transfer complete callback  */
+
+  void                  (* XferRepeatBlockCpltCallback)( struct __MDMA_HandleTypeDef * hmdma); /*!< MDMA block transfer repeat callback    */
+
+  void                  (* XferErrorCallback)( struct __MDMA_HandleTypeDef * hmdma);           /*!< MDMA transfer error callback           */
+
+  void                  (* XferAbortCallback)( struct __MDMA_HandleTypeDef * hmdma);           /*!< MDMA transfer Abort callback           */
+
+
+  MDMA_LinkNodeTypeDef *FirstLinkedListNodeAddress;                                             /*!< specifies the first node address of the transfer list
+                                                                                                     (after the initial node defined by the Init struct)
+                                                                                                     this parameter is used internally by the MDMA driver
+                                                                                                     to construct the linked list node
+                                                                                                */
+
+  MDMA_LinkNodeTypeDef *LastLinkedListNodeAddress;                                             /*!< specifies the last node address of the transfer list
+                                                                                                    this parameter is used internally by the MDMA driver
+                                                                                                    to construct the linked list node
+                                                                                                */
+  uint32_t LinkedListNodeCounter;                                                               /*!< Number of nodes in the MDMA linked list */
+
+  __IO uint32_t          ErrorCode;                                                            /*!< MDMA Error code                        */
+
+} MDMA_HandleTypeDef;
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup MDMA_Exported_Constants MDMA Exported Constants
+  * @brief    MDMA Exported constants
+  * @{
+  */
+
+/** @defgroup MDMA_Error_Codes MDMA Error Codes
+  * @brief    MDMA Error Codes
+  * @{
+  */
+#define HAL_MDMA_ERROR_NONE        ((uint32_t)0x00000000U)   /*!< No error                               */
+#define HAL_MDMA_ERROR_READ_XFER   ((uint32_t)0x00000001U)   /*!< Read Transfer error                    */
+#define HAL_MDMA_ERROR_WRITE_XFER  ((uint32_t)0x00000002U)   /*!< Write Transfer error                   */
+#define HAL_MDMA_ERROR_MASK_DATA   ((uint32_t)0x00000004U)   /*!< Error Mask Data error                  */
+#define HAL_MDMA_ERROR_LINKED_LIST ((uint32_t)0x00000008U)   /*!< Linked list Data error                 */
+#define HAL_MDMA_ERROR_ALIGNMENT   ((uint32_t)0x00000010U)   /*!< Address/Size alignment  error          */
+#define HAL_MDMA_ERROR_BLOCK_SIZE  ((uint32_t)0x00000020U)   /*!< Block Size error                       */
+#define HAL_MDMA_ERROR_TIMEOUT     ((uint32_t)0x00000040U)   /*!< Timeout error                          */
+#define HAL_MDMA_ERROR_NO_XFER     ((uint32_t)0x00000080U)   /*!< Abort or SW trigger requested with no Xfer ongoing   */
+#define HAL_MDMA_ERROR_BUSY        ((uint32_t)0x00000100U)   /*!< DeInit or SW trigger requested with Xfer ongoing   */
+
+/**
+  * @}
+  */
+
+/** @defgroup MDMA_Request_selection MDMA Request selection
+  * @brief    MDMA_Request_selection
+  * @{
+  */
+
+#define MDMA_REQUEST_DMA1_Stream0_TC      ((uint32_t)0x00000000U)  /*!< MDMA HW request is DMA1 Stream 0 Transfer Complete Flag   */
+#define MDMA_REQUEST_DMA1_Stream1_TC      ((uint32_t)0x00000001U)  /*!< MDMA HW request is DMA1 Stream 1 Transfer Complete Flag   */
+#define MDMA_REQUEST_DMA1_Stream2_TC      ((uint32_t)0x00000002U)  /*!< MDMA HW request is DMA1 Stream 2 Transfer Complete Flag   */
+#define MDMA_REQUEST_DMA1_Stream3_TC      ((uint32_t)0x00000003U)  /*!< MDMA HW request is DMA1 Stream 3 Transfer Complete Flag   */
+#define MDMA_REQUEST_DMA1_Stream4_TC      ((uint32_t)0x00000004U)  /*!< MDMA HW request is DMA1 Stream 4 Transfer Complete Flag   */
+#define MDMA_REQUEST_DMA1_Stream5_TC      ((uint32_t)0x00000005U)  /*!< MDMA HW request is DMA1 Stream 5 Transfer Complete Flag   */
+#define MDMA_REQUEST_DMA1_Stream6_TC      ((uint32_t)0x00000006U)  /*!< MDMA HW request is DMA1 Stream 6 Transfer Complete Flag   */
+#define MDMA_REQUEST_DMA1_Stream7_TC      ((uint32_t)0x00000007U)  /*!< MDMA HW request is DMA1 Stream 7 Transfer Complete Flag   */
+#define MDMA_REQUEST_DMA2_Stream0_TC      ((uint32_t)0x00000008U)  /*!< MDMA HW request is DMA2 Stream 0 Transfer Complete Flag   */
+#define MDMA_REQUEST_DMA2_Stream1_TC      ((uint32_t)0x00000009U)  /*!< MDMA HW request is DMA2 Stream 1 Transfer Complete Flag   */
+#define MDMA_REQUEST_DMA2_Stream2_TC      ((uint32_t)0x0000000AU)  /*!< MDMA HW request is DMA2 Stream 2 Transfer Complete Flag   */
+#define MDMA_REQUEST_DMA2_Stream3_TC      ((uint32_t)0x0000000BU)  /*!< MDMA HW request is DMA2 Stream 3 Transfer Complete Flag   */
+#define MDMA_REQUEST_DMA2_Stream4_TC      ((uint32_t)0x0000000CU)  /*!< MDMA HW request is DMA2 Stream 4 Transfer Complete Flag   */
+#define MDMA_REQUEST_DMA2_Stream5_TC      ((uint32_t)0x0000000DU)  /*!< MDMA HW request is DMA2 Stream 5 Transfer Complete Flag   */
+#define MDMA_REQUEST_DMA2_Stream6_TC      ((uint32_t)0x0000000EU)  /*!< MDMA HW request is DMA2 Stream 6 Transfer Complete Flag   */
+#define MDMA_REQUEST_DMA2_Stream7_TC      ((uint32_t)0x0000000FU)  /*!< MDMA HW request is DMA2 Stream 7 Transfer Complete Flag   */
+#define MDMA_REQUEST_FMC_DATA             ((uint32_t)0x00000014U)  /*!< MDMA HW request is NAND data transfer (Tx or Rx) channel  */
+#define MDMA_REQUEST_FMC_ERROR            ((uint32_t)0x00000015U)  /*!< MDMA HW request is NAND ECC/BCH Error channel             */
+#define MDMA_REQUEST_QUADSPI_FIFO_TH      ((uint32_t)0x00000016U)  /*!< MDMA HW request is QSPI FIFO threshold Flag               */
+#define MDMA_REQUEST_QUADSPI_TC           ((uint32_t)0x00000017U)  /*!< MDMA HW request is QSPI Transfer complete Flag            */
+#if defined(CRYP1)
+#define MDMA_REQUEST_CRYP1_IN             ((uint32_t)0x0000001DU)  /*!< MDMA HW request is CRYP1 4 word request from input        */
+#define MDMA_REQUEST_CRYP1_OUT            ((uint32_t)0x0000001EU)  /*!< MDMA HW request is CRYP1 4 word request from output       */
+#endif
+#define MDMA_REQUEST_HASH1_IN             ((uint32_t)0x0000001FU)  /*!< MDMA HW request is HASH1 16 word request from input       */
+#define MDMA_REQUEST_USART1_RX            ((uint32_t)0x00000020U)  /*!< MDMA HW request is USART1 Rx Transfer Complete Flag       */
+#define MDMA_REQUEST_USART1_TX            ((uint32_t)0x00000021U)  /*!< MDMA HW request is USART1 Tx Transfer Complete Flag       */
+#define MDMA_REQUEST_SPI6_RX              ((uint32_t)0x00000022U)  /*!< MDMA HW request is SPI6 Rx Transfer Complete Flag         */
+#define MDMA_REQUEST_SPI6_TX              ((uint32_t)0x00000023U)  /*!< MDMA HW request is SPI6 Tx Transfer Complete Flag         */
+#define MDMA_REQUEST_I2C4_RX              ((uint32_t)0x00000024U)  /*!< MDMA HW request is I2C4 Rx Transfer Complete Flag         */
+#define MDMA_REQUEST_I2C4_TX              ((uint32_t)0x00000025U)  /*!< MDMA HW request is I2C4 Tx Transfer Complete Flag         */
+#define MDMA_REQUEST_I2C6_RX              ((uint32_t)0x00000026U)  /*!< MDMA HW request is I2C6 Rx Transfer Complete Flag         */
+#define MDMA_REQUEST_I2C6_TX              ((uint32_t)0x00000027U)  /*!< MDMA HW request is I2C6 Tx Transfer Complete Flag         */
+#define MDMA_REQUEST_SW                   ((uint32_t)0x40000000U) /*!< MDMA SW request   */
+/**
+  * @}
+  */
+
+/** @defgroup MDMA_Transfer_TriggerMode MDMA Transfer Trigger  Mode
+  * @brief    MDMA Transfer Trigger Mode
+  * @{
+  */
+#define MDMA_BUFFER_TRANSFER          ((uint32_t)0x00000000U)        /*!< Each MDMA request (SW or HW) triggers a buffer transfer                                */
+#define MDMA_BLOCK_TRANSFER           ((uint32_t)MDMA_CTCR_TRGM_0)   /*!< Each MDMA request (SW or HW) triggers a block transfer                                 */
+#define MDMA_REPEAT_BLOCK_TRANSFER    ((uint32_t)MDMA_CTCR_TRGM_1)   /*!< Each MDMA request (SW or HW) triggers a repeated block transfer                        */
+#define MDMA_FULL_TRANSFER            ((uint32_t)MDMA_CTCR_TRGM)     /*!< Each MDMA request (SW or HW) triggers a Full transfer or a linked list transfer if any */
+
+/**
+  * @}
+  */
+
+/** @defgroup MDMA_Priority_level MDMA Priority level
+  * @brief    MDMA Priority level
+  * @{
+  */
+#define MDMA_PRIORITY_LOW             ((uint32_t)0x00000000U)     /*!< Priority level: Low      */
+#define MDMA_PRIORITY_MEDIUM          ((uint32_t)MDMA_CCR_PL_0)  /*!< Priority level: Medium    */
+#define MDMA_PRIORITY_HIGH            ((uint32_t)MDMA_CCR_PL_1)  /*!< Priority level: High      */
+#define MDMA_PRIORITY_VERY_HIGH       ((uint32_t)MDMA_CCR_PL)    /*!< Priority level: Very High */
+
+/**
+  * @}
+  */
+
+/** @defgroup MDMA_Secure_Mode MDMA Secure Mode
+  * @brief    MDMA Secure Mode
+  * @{
+  */
+#define MDMA_SECURE_MODE_DISABLE      ((uint32_t)0x00000000U)    /*!< Secure Mode disabled  */
+#define MDMA_SECURE_MODE_ENABLE       ((uint32_t)MDMA_CCR_SM)    /*!< Secure Mode enabled   */
+
+/**
+  * @}
+  */
+
+/** @defgroup MDMA_Endianness MDMA Endianness
+  * @brief    MDMA Endianness
+  * @{
+  */
+#define MDMA_LITTLE_ENDIANNESS_PRESERVE          ((uint32_t)0x00000000U)   /*!< little endianness preserve                                               */
+#define MDMA_LITTLE_BYTE_ENDIANNESS_EXCHANGE     ((uint32_t)MDMA_CCR_BEX)  /*!< BYTEs endianness exchange when destination data size is > Byte           */
+#define MDMA_LITTLE_HALFWORD_ENDIANNESS_EXCHANGE ((uint32_t)MDMA_CCR_HEX)  /*!< HALF WORDs endianness exchange when destination data size is > HALF WORD */
+#define MDMA_LITTLE_WORD_ENDIANNESS_EXCHANGE     ((uint32_t)MDMA_CCR_WEX)  /*!< WORDs endianness exchange  when destination data size is > DOUBLE WORD   */
+
+/**
+  * @}
+  */
+
+/** @defgroup MDMA_Source_increment_mode MDMA Source increment mode
+  * @brief    MDMA Source increment mode
+  * @{
+  */
+#define MDMA_SRC_INC_DISABLE      ((uint32_t)0x00000000U)                                     /*!< Source address pointer is fixed                                   */
+#define MDMA_SRC_INC_BYTE         ((uint32_t)MDMA_CTCR_SINC_1)                                /*!< Source address pointer is incremented by a BYTE (8 bits)          */
+#define MDMA_SRC_INC_HALFWORD     ((uint32_t)MDMA_CTCR_SINC_1 | (uint32_t)MDMA_CTCR_SINCOS_0) /*!< Source address pointer is incremented by a half Word (16 bits)    */
+#define MDMA_SRC_INC_WORD         ((uint32_t)MDMA_CTCR_SINC_1 | (uint32_t)MDMA_CTCR_SINCOS_1) /*!< Source address pointer is incremented by a Word (32 bits)         */
+#define MDMA_SRC_INC_DOUBLEWORD   ((uint32_t)MDMA_CTCR_SINC_1 | (uint32_t)MDMA_CTCR_SINCOS)   /*!< Source address pointer is incremented by a double Word (64 bits)) */
+#define MDMA_SRC_DEC_BYTE         ((uint32_t)MDMA_CTCR_SINC)                                  /*!< Source address pointer is decremented by a BYTE (8 bits)          */
+#define MDMA_SRC_DEC_HALFWORD     ((uint32_t)MDMA_CTCR_SINC | (uint32_t)MDMA_CTCR_SINCOS_0)   /*!< Source address pointer is decremented by a half Word (16 bits)    */
+#define MDMA_SRC_DEC_WORD         ((uint32_t)MDMA_CTCR_SINC | (uint32_t)MDMA_CTCR_SINCOS_1)   /*!< Source address pointer is decremented by a Word (32 bits)         */
+#define MDMA_SRC_DEC_DOUBLEWORD   ((uint32_t)MDMA_CTCR_SINC | (uint32_t)MDMA_CTCR_SINCOS)     /*!< Source address pointer is decremented by a double Word (64 bits)) */
+
+/**
+  * @}
+  */
+
+/** @defgroup MDMA_Destination_increment_mode MDMA Destination increment mode
+  * @brief    MDMA Destination increment mode
+  * @{
+  */
+#define MDMA_DEST_INC_DISABLE      ((uint32_t)0x00000000U)                                     /*!< Source address pointer is fixed                                   */
+#define MDMA_DEST_INC_BYTE         ((uint32_t)MDMA_CTCR_DINC_1)                                /*!< Source address pointer is incremented by a BYTE (8 bits)          */
+#define MDMA_DEST_INC_HALFWORD     ((uint32_t)MDMA_CTCR_DINC_1 | (uint32_t)MDMA_CTCR_DINCOS_0) /*!< Source address pointer is incremented by a half Word (16 bits)    */
+#define MDMA_DEST_INC_WORD         ((uint32_t)MDMA_CTCR_DINC_1 | (uint32_t)MDMA_CTCR_DINCOS_1) /*!< Source address pointer is incremented by a Word (32 bits)         */
+#define MDMA_DEST_INC_DOUBLEWORD   ((uint32_t)MDMA_CTCR_DINC_1 | (uint32_t)MDMA_CTCR_DINCOS)   /*!< Source address pointer is incremented by a double Word (64 bits)) */
+#define MDMA_DEST_DEC_BYTE         ((uint32_t)MDMA_CTCR_DINC)                                  /*!< Source address pointer is decremented by a BYTE (8 bits)          */
+#define MDMA_DEST_DEC_HALFWORD     ((uint32_t)MDMA_CTCR_DINC | (uint32_t)MDMA_CTCR_DINCOS_0)   /*!< Source address pointer is decremented by a half Word (16 bits)    */
+#define MDMA_DEST_DEC_WORD         ((uint32_t)MDMA_CTCR_DINC | (uint32_t)MDMA_CTCR_DINCOS_1)   /*!< Source address pointer is decremented by a Word (32 bits)         */
+#define MDMA_DEST_DEC_DOUBLEWORD   ((uint32_t)MDMA_CTCR_DINC | (uint32_t)MDMA_CTCR_DINCOS)     /*!< Source address pointer is decremented by a double Word (64 bits)) */
+
+/**
+  * @}
+  */
+
+/** @defgroup MDMA_Source_data_size MDMA Source data size
+  * @brief    MDMA Source data size
+  * @{
+  */
+#define MDMA_SRC_DATASIZE_BYTE        ((uint32_t)0x00000000U)         /*!< Source data size is Byte        */
+#define MDMA_SRC_DATASIZE_HALFWORD    ((uint32_t)MDMA_CTCR_SSIZE_0)   /*!< Source data size is half word   */
+#define MDMA_SRC_DATASIZE_WORD        ((uint32_t)MDMA_CTCR_SSIZE_1)   /*!< Source data size is word        */
+#define MDMA_SRC_DATASIZE_DOUBLEWORD  ((uint32_t)MDMA_CTCR_SSIZE)     /*!< Source data size is double word */
+
+/**
+  * @}
+  */
+
+/** @defgroup MDMA_Destination_data_size MDMA Destination data size
+  * @brief    MDMA Destination data size
+  * @{
+  */
+#define MDMA_DEST_DATASIZE_BYTE        ((uint32_t)0x00000000U)         /*!< Destination data size is Byte        */
+#define MDMA_DEST_DATASIZE_HALFWORD    ((uint32_t)MDMA_CTCR_DSIZE_0)   /*!< Destination data size is half word   */
+#define MDMA_DEST_DATASIZE_WORD        ((uint32_t)MDMA_CTCR_DSIZE_1)   /*!< Destination data size is word        */
+#define MDMA_DEST_DATASIZE_DOUBLEWORD  ((uint32_t)MDMA_CTCR_DSIZE)     /*!< Destination data size is double word */
+
+/**
+  * @}
+  */
+
+/** @defgroup MDMA_data_Alignment MDMA data alignment
+  * @brief    MDMA data alignment
+  * @{
+  */
+#define MDMA_DATAALIGN_PACKENABLE        ((uint32_t)MDMA_CTCR_PKE)     /*!< The source data is packed/un-packed into the destination data size
+                                                                            All data are right aligned, in Little Endien mode.                                              */
+#define MDMA_DATAALIGN_RIGHT            ((uint32_t)0x00000000U)        /*!< Right Aligned, padded w/ 0s (default)                                                           */
+#define MDMA_DATAALIGN_RIGHT_SIGNED     ((uint32_t)MDMA_CTCR_PAM_0)    /*!< Right Aligned, Sign extended ,
+                                                                            Note : this mode is allowed only if the Source data size is smaller than Destination data size  */
+#define MDMA_DATAALIGN_LEFT             ((uint32_t)MDMA_CTCR_PAM_1)    /*!< Left Aligned (padded with 0s)                                                                   */
+
+/**
+  * @}
+  */
+
+/** @defgroup MDMA_Source_burst MDMA Source burst
+  * @brief    MDMA Source burst
+  * @{
+  */
+#define MDMA_SOURCE_BURST_SINGLE        ((uint32_t)0x00000000U)                                       /*!< single transfer */
+#define MDMA_SOURCE_BURST_2BEATS        ((uint32_t)MDMA_CTCR_SBURST_0)                                /*!< Burst 2 beats   */
+#define MDMA_SOURCE_BURST_4BEATS        ((uint32_t)MDMA_CTCR_SBURST_1)                                /*!< Burst 4 beats   */
+#define MDMA_SOURCE_BURST_8BEATS        ((uint32_t)MDMA_CTCR_SBURST_0 | (uint32_t)MDMA_CTCR_SBURST_1) /*!< Burst 8 beats   */
+#define MDMA_SOURCE_BURST_16BEATS       ((uint32_t)MDMA_CTCR_SBURST_2)                                /*!< Burst 16 beats  */
+#define MDMA_SOURCE_BURST_32BEATS       ((uint32_t)MDMA_CTCR_SBURST_0 | (uint32_t)MDMA_CTCR_SBURST_2) /*!< Burst 32 beats  */
+#define MDMA_SOURCE_BURST_64BEATS       ((uint32_t)MDMA_CTCR_SBURST_1 | (uint32_t)MDMA_CTCR_SBURST_2) /*!< Burst 64 beats  */
+#define MDMA_SOURCE_BURST_128BEATS      ((uint32_t)MDMA_CTCR_SBURST)                                  /*!< Burst 128 beats */
+
+/**
+  * @}
+  */
+
+/** @defgroup MDMA_Destination_burst MDMA Destination burst
+  * @brief    MDMA Destination burst
+  * @{
+  */
+#define MDMA_DEST_BURST_SINGLE        ((uint32_t)0x00000000U)                                        /*!< single transfer */
+#define MDMA_DEST_BURST_2BEATS        ((uint32_t)MDMA_CTCR_DBURST_0)                                 /*!< Burst 2 beats   */
+#define MDMA_DEST_BURST_4BEATS        ((uint32_t)MDMA_CTCR_DBURST_1)                                 /*!< Burst 4 beats   */
+#define MDMA_DEST_BURST_8BEATS        ((uint32_t)MDMA_CTCR_DBURST_0 | (uint32_t)MDMA_CTCR_DBURST_1)  /*!< Burst 8 beats   */
+#define MDMA_DEST_BURST_16BEATS       ((uint32_t)MDMA_CTCR_DBURST_2)                                 /*!< Burst 16 beats  */
+#define MDMA_DEST_BURST_32BEATS       ((uint32_t)MDMA_CTCR_DBURST_0 | (uint32_t)MDMA_CTCR_DBURST_2)  /*!< Burst 32 beats  */
+#define MDMA_DEST_BURST_64BEATS       ((uint32_t)MDMA_CTCR_DBURST_1 | (uint32_t)MDMA_CTCR_DBURST_2)  /*!< Burst 64 beats  */
+#define MDMA_DEST_BURST_128BEATS      ((uint32_t)MDMA_CTCR_DBURST)                                   /*!< Burst 128 beats */
+
+/**
+  * @}
+  */
+
+/** @defgroup MDMA_interrupt_enable_definitions MDMA interrupt enable definitions
+  * @brief    MDMA interrupt enable definitions
+  * @{
+  */
+#define MDMA_IT_TE   ((uint32_t)MDMA_CCR_TEIE)   /*!< Transfer Error interrupt            */
+#define MDMA_IT_CTC  ((uint32_t)MDMA_CCR_CTCIE)  /*!< Channel Transfer Complete interrupt */
+#define MDMA_IT_BRT  ((uint32_t)MDMA_CCR_BRTIE)  /*!< Block Repeat Transfer interrupt     */
+#define MDMA_IT_BT   ((uint32_t)MDMA_CCR_BTIE)   /*!< Block Transfer interrupt            */
+#define MDMA_IT_BFTC ((uint32_t)MDMA_CCR_TCIE)   /*!< Buffer Transfer Complete interrupt  */
+
+/**
+  * @}
+  */
+
+/** @defgroup MDMA_flag_definitions MDMA flag definitions
+  * @brief    MDMA flag definitions
+  * @{
+  */
+#define MDMA_FLAG_TE    ((uint32_t)MDMA_CISR_TEIF)  /*!< Transfer Error flag                 */
+#define MDMA_FLAG_CTC   ((uint32_t)MDMA_CISR_CTCIF) /*!< Channel Transfer Complete flag      */
+#define MDMA_FLAG_BRT   ((uint32_t)MDMA_CISR_BRTIF) /*!< Block Repeat Transfer complete flag */
+#define MDMA_FLAG_BT    ((uint32_t)MDMA_CISR_BTIF)  /*!< Block Transfer complete flag        */
+#define MDMA_FLAG_BFTC  ((uint32_t)MDMA_CISR_TCIF)  /*!< BuFfer Transfer complete flag       */
+#define MDMA_FLAG_CRQA  ((uint32_t)MDMA_CISR_CRQA)  /*!< Channel ReQest Active flag          */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @defgroup MDMA_Exported_Macros MDMA Exported Macros
+  * @{
+  */
+
+/**
+  * @brief  Enable the specified MDMA Channel.
+  * @param  __HANDLE__: MDMA handle
+  * @retval None
+  */
+#define __HAL_MDMA_ENABLE(__HANDLE__)  ((__HANDLE__)->Instance->CCR |=  MDMA_CCR_EN)
+
+/**
+  * @brief  Disable the specified MDMA Channel.
+  * @param  __HANDLE__: MDMA handle
+  * @retval None
+  */
+#define __HAL_MDMA_DISABLE(__HANDLE__)  ((__HANDLE__)->Instance->CCR &=  ~MDMA_CCR_EN)
+
+/**
+  * @brief  Get the MDMA Channel pending flags.
+  * @param  __HANDLE__: MDMA handle
+  * @param  __FLAG__: Get the specified flag.
+  *          This parameter can be any combination of the following values:
+  *            @arg MDMA_FLAG_TE   : Transfer Error flag.
+  *            @arg MDMA_FLAG_CTC  : Channel Transfer Complete flag.
+  *            @arg MDMA_FLAG_BRT  : Block Repeat Transfer flag.
+  *            @arg MDMA_FLAG_BT   : Block Transfer complete flag.
+  *            @arg MDMA_FLAG_BFTC : BuFfer Transfer Complete flag.
+  *            @arg MDMA_FLAG_CRQA : Channel ReQest Active flag.
+  * @retval The state of FLAG (SET or RESET).
+  */
+#define __HAL_MDMA_GET_FLAG(__HANDLE__, __FLAG__)  ((__HANDLE__)->Instance->CISR & (__FLAG__))
+
+/**
+  * @brief  Clear the MDMA Stream pending flags.
+  * @param  __HANDLE__: MDMA handle
+  * @param  __FLAG__: specifies the flag to clear.
+  *          This parameter can be any combination of the following values:
+  *            @arg MDMA_FLAG_TE   : Transfer Error flag.
+  *            @arg MDMA_FLAG_CTC  : Channel Transfer Complete flag.
+  *            @arg MDMA_FLAG_BRT  : Block Repeat Transfer flag.
+  *            @arg MDMA_FLAG_BT   : Block Transfer complete flag.
+  *            @arg MDMA_FLAG_BFTC : BuFfer Transfer Complete flag.
+  * @retval None
+  */
+#define __HAL_MDMA_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->CIFCR = (__FLAG__))
+
+/**
+  * @brief  Enables the specified MDMA Channel interrupts.
+  * @param  __HANDLE__: MDMA handle
+  * @param __INTERRUPT__: specifies the DMA interrupt sources to be enabled or disabled.
+  *          This parameter can be any combination of the following values:
+  *            @arg MDMA_IT_TE   :  Transfer Error interrupt mask
+  *            @arg MDMA_IT_CTC  :  Channel Transfer Complete interrupt mask
+  *            @arg MDMA_IT_BRT  :  Block Repeat Transfer interrupt mask
+  *            @arg MDMA_IT_BT   :  Block Transfer interrupt mask
+  *            @arg MDMA_IT_BFTC :  BuFfer Transfer Complete interrupt mask
+  * @retval None
+  */
+#define __HAL_MDMA_ENABLE_IT(__HANDLE__, __INTERRUPT__)   ((__HANDLE__)->Instance->CCR |= (__INTERRUPT__))
+
+/**
+  * @brief  Disables the specified MDMA Channel interrupts.
+  * @param  __HANDLE__: MDMA handle
+  * @param __INTERRUPT__: specifies the MDMA interrupt sources to be enabled or disabled.
+  *          This parameter can be any combination of the following values:
+  *            @arg MDMA_IT_TE   :  Transfer Error interrupt mask
+  *            @arg MDMA_IT_CTC  :  Channel Transfer Complete interrupt mask
+  *            @arg MDMA_IT_BRT  :  Block Repeat Transfer interrupt mask
+  *            @arg MDMA_IT_BT   :  Block Transfer interrupt mask
+  *            @arg MDMA_IT_BFTC :  BuFfer Transfer Complete interrupt mask
+  * @retval None
+  */
+#define __HAL_MDMA_DISABLE_IT(__HANDLE__, __INTERRUPT__)  ((__HANDLE__)->Instance->CCR &= ~(__INTERRUPT__))
+
+/**
+  * @brief  Checks whether the specified MDMA Channel interrupt is enabled or not.
+  * @param  __HANDLE__: MDMA handle
+  * @param  __INTERRUPT__: specifies the MDMA interrupt source to check.
+  *            @arg MDMA_IT_TE   :  Transfer Error interrupt mask
+  *            @arg MDMA_IT_CTC  :  Channel Transfer Complete interrupt mask
+  *            @arg MDMA_IT_BRT  :  Block Repeat Transfer interrupt mask
+  *            @arg MDMA_IT_BT   :  Block Transfer interrupt mask
+  *            @arg MDMA_IT_BFTC :  BuFfer Transfer Complete interrupt mask
+  * @retval The state of MDMA_IT (SET or RESET).
+  */
+#define __HAL_MDMA_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__)  (((__HANDLE__)->Instance->CCR & (__INTERRUPT__)))
+
+/**
+  * @brief  Writes the number of data in bytes to be transferred on the MDMA Channelx.
+  * @param  __HANDLE__ : MDMA handle
+  * @param  __COUNTER__: Number of data in bytes to be transferred.
+  * @retval None
+  */
+#define __HAL_MDMA_SET_COUNTER(__HANDLE__, __COUNTER__)  ((__HANDLE__)->Instance->CBNDTR |= ((__COUNTER__) & MDMA_CBNDTR_BNDT))
+
+/**
+  * @brief  Returns the number of remaining data in bytes in the current MDMA Channelx transfer.
+  * @param  __HANDLE__ : MDMA handle
+  * @retval The number of remaining data in bytes in the current MDMA Channelx transfer.
+  */
+#define __HAL_MDMA_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->CBNDTR & MDMA_CBNDTR_BNDT)
+
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup MDMA_Exported_Functions  MDMA Exported Functions
+  * @{
+  */
+
+/* Initialization and de-initialization functions *****************************/
+/** @defgroup MDMA_Exported_Functions_Group1 Initialization and de-initialization functions
+  * @brief   Initialization and de-initialization functions
+  * @{
+  */
+HAL_StatusTypeDef HAL_MDMA_Init(MDMA_HandleTypeDef *hmdma);
+HAL_StatusTypeDef HAL_MDMA_DeInit (MDMA_HandleTypeDef *hmdma);
+HAL_StatusTypeDef HAL_MDMA_ConfigPostRequestMask(MDMA_HandleTypeDef *hmdma, uint32_t MaskAddress, uint32_t MaskData);
+
+HAL_StatusTypeDef HAL_MDMA_RegisterCallback(MDMA_HandleTypeDef *hmdma, HAL_MDMA_CallbackIDTypeDef CallbackID, void (* pCallback)(MDMA_HandleTypeDef *_hmdma));
+HAL_StatusTypeDef HAL_MDMA_UnRegisterCallback(MDMA_HandleTypeDef *hmdma, HAL_MDMA_CallbackIDTypeDef CallbackID);
+
+/**
+  * @}
+  */
+
+/* Linked list operation functions ********************************************/
+/** @defgroup MDMA_Exported_Functions_Group2 Linked List operation functions
+  * @brief   Linked list operation functions
+  * @{
+  */
+
+HAL_StatusTypeDef HAL_MDMA_LinkedList_CreateNode(MDMA_LinkNodeTypeDef *pNode, MDMA_LinkNodeConfTypeDef *pNodeConfig);
+HAL_StatusTypeDef HAL_MDMA_LinkedList_AddNode(MDMA_HandleTypeDef *hmdma, MDMA_LinkNodeTypeDef *pNewNode, MDMA_LinkNodeTypeDef *pPrevNode);
+HAL_StatusTypeDef HAL_MDMA_LinkedList_RemoveNode(MDMA_HandleTypeDef *hmdma, MDMA_LinkNodeTypeDef *pNode);
+HAL_StatusTypeDef HAL_MDMA_LinkedList_EnableCircularMode(MDMA_HandleTypeDef *hmdma);
+HAL_StatusTypeDef HAL_MDMA_LinkedList_DisableCircularMode(MDMA_HandleTypeDef *hmdma);
+
+
+/**
+  * @}
+  */
+
+/* IO operation functions *****************************************************/
+/** @defgroup MDMA_Exported_Functions_Group3 I/O operation functions
+  * @brief   I/O operation functions
+  * @{
+  */
+HAL_StatusTypeDef HAL_MDMA_Start (MDMA_HandleTypeDef *hmdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t BlockDataLength, uint32_t BlockCount);
+HAL_StatusTypeDef HAL_MDMA_Start_IT(MDMA_HandleTypeDef *hmdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t BlockDataLength, uint32_t BlockCount);
+HAL_StatusTypeDef HAL_MDMA_Abort(MDMA_HandleTypeDef *hmdma);
+HAL_StatusTypeDef HAL_MDMA_Abort_IT(MDMA_HandleTypeDef *hmdma);
+HAL_StatusTypeDef HAL_MDMA_PollForTransfer(MDMA_HandleTypeDef *hmdma, HAL_MDMA_LevelCompleteTypeDef CompleteLevel, uint32_t Timeout);
+HAL_StatusTypeDef HAL_MDMA_GenerateSWRequest(MDMA_HandleTypeDef *hmdma);
+void HAL_MDMA_IRQHandler(MDMA_HandleTypeDef *hmdma);
+
+/**
+  * @}
+  */
+
+/* Peripheral State and Error functions ***************************************/
+/** @defgroup MDMA_Exported_Functions_Group4 Peripheral State functions
+  * @brief    Peripheral State functions
+  * @{
+  */
+HAL_MDMA_StateTypeDef HAL_MDMA_GetState(MDMA_HandleTypeDef *hmdma);
+uint32_t              HAL_MDMA_GetError(MDMA_HandleTypeDef *hmdma);
+
+void HAL_MDMA_MspInit(MDMA_HandleTypeDef *hmdma);
+void HAL_MDMA_MspDeInit(MDMA_HandleTypeDef *hmdma);
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private types -------------------------------------------------------------*/
+/** @defgroup MDMA_Private_Types MDMA Private Types
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private defines -----------------------------------------------------------*/
+/** @defgroup MDMA_Private_Defines MDMA Private Defines
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup MDMA_Private_Variables MDMA Private Variables
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup MDMA_Private_Constants MDMA Private Constants
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup MDMA_Private_Macros MDMA Private Macros
+  * @{
+  */
+
+#define IS_MDMA_LEVEL_COMPLETE(__LEVEL__) (((__LEVEL__) == HAL_MDMA_FULL_TRANSFER )  || \
+                                           ((__LEVEL__) == HAL_MDMA_BUFFER_TRANSFER )|| \
+                                           ((__LEVEL__) == HAL_MDMA_BLOCK_TRANSFER ) || \
+                                           ((__LEVEL__) == HAL_MDMA_REPEAT_BLOCK_TRANSFER ))
+
+
+#define IS_MDMA_PRIORITY(__PRIORITY__) (((__PRIORITY__) == MDMA_PRIORITY_LOW )   || \
+                                        ((__PRIORITY__) == MDMA_PRIORITY_MEDIUM) || \
+                                        ((__PRIORITY__) == MDMA_PRIORITY_HIGH)   || \
+                                        ((__PRIORITY__) == MDMA_PRIORITY_VERY_HIGH))
+
+#define IS_MDMA_SECURE_MODE(__SECURE_MODE__) (((__SECURE_MODE__) == MDMA_SECURE_MODE_DISABLE ) || \
+                                              ((__SECURE_MODE__) == MDMA_SECURE_MODE_ENABLE))
+#define IS_MDMA_ENDIANNESS_MODE(__ENDIANNESS__) (((__ENDIANNESS__) == MDMA_LITTLE_ENDIANNESS_PRESERVE )         || \
+                                                 ((__ENDIANNESS__) == MDMA_LITTLE_BYTE_ENDIANNESS_EXCHANGE)     || \
+                                                 ((__ENDIANNESS__) == MDMA_LITTLE_HALFWORD_ENDIANNESS_EXCHANGE) || \
+                                                 ((__ENDIANNESS__) == MDMA_LITTLE_WORD_ENDIANNESS_EXCHANGE))
+
+#define IS_MDMA_REQUEST(__REQUEST__) (((__REQUEST__) == MDMA_REQUEST_SW ) || ((__REQUEST__) <= MDMA_REQUEST_I2C6_TX))
+
+#define IS_MDMA_SOURCE_INC(__INC__) (((__INC__) == MDMA_SRC_INC_DISABLE )   || \
+                                     ((__INC__) == MDMA_SRC_INC_BYTE )      || \
+                                     ((__INC__) == MDMA_SRC_INC_HALFWORD )  || \
+                                     ((__INC__) == MDMA_SRC_INC_WORD )      || \
+                                     ((__INC__) == MDMA_SRC_INC_DOUBLEWORD) || \
+                                     ((__INC__) == MDMA_SRC_DEC_BYTE)       || \
+                                     ((__INC__) == MDMA_SRC_DEC_HALFWORD)   || \
+                                     ((__INC__) == MDMA_SRC_DEC_WORD)       || \
+                                     ((__INC__) == MDMA_SRC_DEC_DOUBLEWORD))
+
+#define IS_MDMA_DESTINATION_INC(__INC__) (((__INC__) == MDMA_DEST_INC_DISABLE )   || \
+                                          ((__INC__) == MDMA_DEST_INC_BYTE )      || \
+                                          ((__INC__) == MDMA_DEST_INC_HALFWORD )  || \
+                                          ((__INC__) == MDMA_DEST_INC_WORD )      || \
+                                          ((__INC__) == MDMA_DEST_INC_DOUBLEWORD) || \
+                                          ((__INC__) == MDMA_DEST_DEC_BYTE)       || \
+                                          ((__INC__) == MDMA_DEST_DEC_HALFWORD)   || \
+                                          ((__INC__) == MDMA_DEST_DEC_WORD)       || \
+                                          ((__INC__) == MDMA_DEST_DEC_DOUBLEWORD))
+
+#define IS_MDMA_SOURCE_DATASIZE(__SIZE__) (((__SIZE__) == MDMA_SRC_DATASIZE_BYTE )     || \
+                                           ((__SIZE__) == MDMA_SRC_DATASIZE_HALFWORD ) || \
+                                           ((__SIZE__) == MDMA_SRC_DATASIZE_WORD )     || \
+                                           ((__SIZE__) == MDMA_SRC_DATASIZE_DOUBLEWORD))
+
+#define IS_MDMA_DESTINATION_DATASIZE(__SIZE__) (((__SIZE__) == MDMA_DEST_DATASIZE_BYTE )     || \
+                                                ((__SIZE__) == MDMA_DEST_DATASIZE_HALFWORD ) || \
+                                                ((__SIZE__) == MDMA_DEST_DATASIZE_WORD )     || \
+                                                ((__SIZE__) == MDMA_DEST_DATASIZE_DOUBLEWORD))
+
+#define IS_MDMA_DATA_ALIGNMENT(__ALIGNMENT__) (((__ALIGNMENT__) == MDMA_DATAALIGN_PACKENABLE )    || \
+                                               ((__ALIGNMENT__) == MDMA_DATAALIGN_RIGHT )         || \
+                                               ((__ALIGNMENT__) == MDMA_DATAALIGN_RIGHT_SIGNED )  || \
+                                               ((__ALIGNMENT__) == MDMA_DATAALIGN_LEFT))
+
+
+#define IS_MDMA_SOURCE_BURST(__BURST__) (((__BURST__) == MDMA_SOURCE_BURST_SINGLE ) || \
+                                         ((__BURST__) == MDMA_SOURCE_BURST_2BEATS ) || \
+                                         ((__BURST__) == MDMA_SOURCE_BURST_4BEATS ) || \
+                                         ((__BURST__) == MDMA_SOURCE_BURST_8BEATS)  || \
+                                         ((__BURST__) == MDMA_SOURCE_BURST_16BEATS) || \
+                                         ((__BURST__) == MDMA_SOURCE_BURST_32BEATS) || \
+                                         ((__BURST__) == MDMA_SOURCE_BURST_64BEATS) || \
+                                         ((__BURST__) == MDMA_SOURCE_BURST_128BEATS))
+
+
+#define IS_MDMA_DESTINATION_BURST(__BURST__) (((__BURST__) == MDMA_DEST_BURST_SINGLE ) || \
+                                              ((__BURST__) == MDMA_DEST_BURST_2BEATS ) || \
+                                              ((__BURST__) == MDMA_DEST_BURST_4BEATS ) || \
+                                              ((__BURST__) == MDMA_DEST_BURST_8BEATS)  || \
+                                              ((__BURST__) == MDMA_DEST_BURST_16BEATS) || \
+                                              ((__BURST__) == MDMA_DEST_BURST_32BEATS) || \
+                                              ((__BURST__) == MDMA_DEST_BURST_64BEATS) || \
+                                              ((__BURST__) == MDMA_DEST_BURST_128BEATS))
+
+ #define IS_MDMA_TRANSFER_TRIGGER_MODE(__MODE__) (((__MODE__) == MDMA_BUFFER_TRANSFER )      || \
+                                                  ((__MODE__) == MDMA_BLOCK_TRANSFER )        || \
+                                                  ((__MODE__) == MDMA_REPEAT_BLOCK_TRANSFER ) || \
+                                                  ((__MODE__) == MDMA_FULL_TRANSFER))
+
+#define IS_MDMA_BUFFER_TRANSFER_LENGTH(__LENGTH__) (((__LENGTH__) >= 0x00000001U) && ((__LENGTH__) < 0x000000FFU))
+
+#define IS_MDMA_BLOCK_COUNT(__COUNT__) (((__COUNT__) > 0U ) && ((__COUNT__) <= 4096U))
+
+#define IS_MDMA_TRANSFER_LENGTH(SIZE) (((SIZE) > 0U) && ((SIZE) <= 65536U))
+
+#define IS_MDMA_BLOCK_ADDR_OFFSET(__BLOCK_ADD_OFFSET__) (((__BLOCK_ADD_OFFSET__) > (-65536)) && ((__BLOCK_ADD_OFFSET__) < 65536))
+
+/**
+  * @}
+  */
+
+/* Private functions prototypes ----------------------------------------------*/
+/** @defgroup MDMA_Private_Functions_Prototypes MDMA Private Functions Prototypes
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup MDMA_Private_Functions MDMA Private Functions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32MP1xx_HAL_MDMA_H */

meta-st/meta-st-stm32mp-addons/mx/stm32mp157d-vrpmdv-mon-mx/Drivers/STM32MP1xx_HAL_Driver/Inc/stm32mp1xx_hal_pwr.h

@@ -0,0 +1,491 @@
+/**
+  ******************************************************************************
+  * @file    stm32mp1xx_hal_pwr.h
+  * @author  MCD Application Team
+  * @brief   Header file of PWR HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32MP1xx_HAL_PWR_H
+#define __STM32MP1xx_HAL_PWR_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32mp1xx_hal_def.h"
+
+/** @addtogroup STM32MP1xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup PWR
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup PWR_Exported_Types PWR Exported Types
+  * @{
+  */
+/**
+  * @brief  PWR PVD configuration structure definition
+  */
+typedef struct
+{
+  uint32_t PVDLevel;   /*!< PVDLevel: Specifies the PVD detection level.
+                            This parameter can be a value of @ref PWR_PVD_detection_level */
+
+  uint32_t Mode;      /*!< Mode: Specifies the operating mode for the selected pins.
+                           This parameter can be a value of @ref PWR_PVD_Mode */
+} PWR_PVDTypeDef;
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup PWR_Exported_Constants PWR Exported Constants
+  * @{
+  */
+
+/** @defgroup PWR_PVD_detection_level PWR PVD detection level
+  * @{
+  */
+#define PWR_PVDLEVEL_0                  PWR_CR1_PLS_LEV0 /* 1.95V */
+#define PWR_PVDLEVEL_1                  PWR_CR1_PLS_LEV1 /* 2.1V  */
+#define PWR_PVDLEVEL_2                  PWR_CR1_PLS_LEV2 /* 2.25V */
+#define PWR_PVDLEVEL_3                  PWR_CR1_PLS_LEV3 /* 2.4V  */
+#define PWR_PVDLEVEL_4                  PWR_CR1_PLS_LEV4 /* 2.55V */
+#define PWR_PVDLEVEL_5                  PWR_CR1_PLS_LEV5 /* 2.7V  */
+#define PWR_PVDLEVEL_6                  PWR_CR1_PLS_LEV6 /* 2.85V */
+#define PWR_PVDLEVEL_7                  PWR_CR1_PLS_LEV7 /* External voltage level on PVD_IN
+                                                            (compared to internal VREFINT) */
+
+#define IS_PWR_PVD_LEVEL(__LEVEL__)     (((__LEVEL__) == PWR_PVDLEVEL_0) || ((__LEVEL__) == PWR_PVDLEVEL_1)|| \
+                                         ((__LEVEL__) == PWR_PVDLEVEL_2) || ((__LEVEL__) == PWR_PVDLEVEL_3)|| \
+                                         ((__LEVEL__) == PWR_PVDLEVEL_4) || ((__LEVEL__) == PWR_PVDLEVEL_5)|| \
+                                         ((__LEVEL__) == PWR_PVDLEVEL_6) || ((__LEVEL__) == PWR_PVDLEVEL_7))
+/**
+  * @}
+  */
+
+/** @defgroup PWR_PVD_Mode PWR PVD Mode
+  * @{
+  */
+#define PWR_PVD_MODE_NORMAL                 ((uint32_t)0x00000000U)   /*!< Basic mode is used */
+#define PWR_PVD_MODE_IT_RISING              ((uint32_t)0x00010001U)   /*!< External Interrupt Mode with Rising edge trigger detection */
+#define PWR_PVD_MODE_IT_FALLING             ((uint32_t)0x00010002U)   /*!< External Interrupt Mode with Falling edge trigger detection */
+#define PWR_PVD_MODE_IT_RISING_FALLING      ((uint32_t)0x00010003U)   /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
+
+#define IS_PWR_PVD_MODE(__MODE__)          (((__MODE__) == PWR_PVD_MODE_NORMAL) || ((__MODE__) == PWR_PVD_MODE_IT_RISING)  || \
+                                            ((__MODE__) == PWR_PVD_MODE_IT_FALLING) || ((__MODE__) == PWR_PVD_MODE_IT_RISING_FALLING))
+
+/**
+  * @}
+  */
+
+/** @defgroup PWR_Regulator_state_in_STOP_mode PWR Regulator state in STOP_mode
+  * @{
+  */
+#define PWR_MAINREGULATOR_ON                        ((uint32_t)0x00000000)
+#define PWR_LOWPOWERREGULATOR_ON                    PWR_CR1_LPDS
+
+#define IS_PWR_REGULATOR(__REGULATOR__)     (((__REGULATOR__) == PWR_MAINREGULATOR_ON) || \
+                                             ((__REGULATOR__) == PWR_LOWPOWERREGULATOR_ON))
+/**
+  * @}
+  */
+
+/** @defgroup PWR_SLEEP_mode_entry PWR SLEEP mode entry
+  * @{
+  */
+#define PWR_SLEEPENTRY_WFI              ((uint8_t)0x01)
+#define PWR_SLEEPENTRY_WFE              ((uint8_t)0x02)
+#define IS_PWR_SLEEP_ENTRY(__ENTRY__)   (((__ENTRY__) == PWR_SLEEPENTRY_WFI) || ((__ENTRY__) == PWR_SLEEPENTRY_WFE))
+/**
+  * @}
+  */
+
+/** @defgroup PWR_STOP_mode_entry PWR STOP mode entry
+  * @{
+  */
+#define PWR_STOPENTRY_WFI               ((uint8_t)0x01)
+#define PWR_STOPENTRY_WFE               ((uint8_t)0x02)
+
+#define IS_PWR_STOP_ENTRY(__ENTRY__)    (((__ENTRY__) == PWR_STOPENTRY_WFI) || ((__ENTRY__) == PWR_STOPENTRY_WFE))
+/**
+  * @}
+  */
+
+
+
+/** @defgroup PWR_Flag PWR Flag
+  * @{
+  */
+#define PWR_FLAG_SB                     ((uint8_t)0x01U)   /* System STANDBY Flag  */
+#define PWR_FLAG_STOP                   ((uint8_t)0x02U)   /* STOP Flag */
+#define PWR_FLAG_CSB                    ((uint8_t)0x03U)   /* MPU CSTANBY flag */
+#define PWR_FLAG_AVDO                   ((uint8_t)0x06U)
+#define PWR_FLAG_PVDO                   ((uint8_t)0x07U)
+#define PWR_FLAG_BRR                    ((uint8_t)0x08U)
+#define PWR_FLAG_RRR                    ((uint8_t)0x09U)
+#define PWR_FLAG_VBATL                  ((uint8_t)0x0AU)
+#define PWR_FLAG_VBATH                  ((uint8_t)0x0BU)
+#define PWR_FLAG_TEMPL                  ((uint8_t)0x0CU)
+#define PWR_FLAG_TEMPH                  ((uint8_t)0x0DU)
+#define PWR_FLAG_11R                    ((uint8_t)0x0EU)
+#define PWR_FLAG_18R                    ((uint8_t)0x0FU)
+#define PWR_FLAG_USB                    ((uint8_t)0x10U)
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @defgroup PWR_Exported_Macro PWR Exported Macro
+  * @{
+  */
+
+/** @brief  Check PWR flag is set or not.
+  * @param  __FLAG__: specifies the flag to check.
+  *           This parameter can be one of the following values:
+  *            @arg PWR_FLAG_PVDO: PVD Output. This flag is valid only if PVD is enabled
+  *                  by the HAL_PWR_EnablePVD() function. The PVD is stopped by Standby mode
+  *            @arg PWR_FLAG_AVDO: AVD Output. This flag is valid only if AVD is enabled
+  *                  by the HAL_PWREx_EnableAVD() function. The AVD is stopped by Standby mode
+  *            @arg PWR_FLAG_SB: StandBy flag. This flag indicates that the system was
+  *                  resumed from StandBy mode.
+  *            @arg PWR_FLAG_BRR: Backup regulator ready flag. This bit is not reset
+  *                  when the device wakes up from Standby mode or by a system reset
+  *                  or power reset.
+  *            @arg PWR_FLAG_RRR: Retention Regulator ready flag. This bit is not reset
+  *                  when the device wakes up from Standby mode or by a system reset
+  *                  or power reset.
+  *            @arg PWR_FLAG_VBATL:
+  *            @arg PWR_FLAG_VBATH:
+  *            @arg PWR_FLAG_TEMPL:
+  *            @arg PWR_FLAG_TEMPH:
+  *            @arg PWR_FLAG_11R: 1V1 regulator supply ready
+  *            @arg PWR_FLAG_18R: 1V8 regulator supply ready
+  *            @arg PWR_FLAG_USB: USB 3.3V supply ready
+  *            @arg PWR_FLAG_SB: StandBy flag
+  *            @arg PWR_FLAG_STOP: STOP flag
+  *            @arg PWR_FLAG_CSB_MPU: MPU CSTANBY flag
+  *
+  * @retval The new state of __FLAG__ (TRUE or FALSE).
+  */
+#ifdef CORE_CM4
+#define __HAL_PWR_GET_FLAG(__FLAG__) ( \
+((__FLAG__) == PWR_FLAG_PVDO)?((PWR->CSR1 & PWR_CSR1_PVDO) == PWR_CSR1_PVDO) : \
+((__FLAG__) == PWR_FLAG_AVDO)?((PWR->CSR1 & PWR_CSR1_AVDO) == PWR_CSR1_AVDO) : \
+((__FLAG__) == PWR_FLAG_BRR)?((PWR->CR2 & PWR_CR2_BRRDY) == PWR_CR2_BRRDY) : \
+((__FLAG__) == PWR_FLAG_RRR)?((PWR->CR2 & PWR_CR2_RRRDY) == PWR_CR2_RRRDY) : \
+((__FLAG__) == PWR_FLAG_VBATL)?((PWR->CR2 & PWR_CR2_VBATL) == PWR_CR2_VBATL) : \
+((__FLAG__) == PWR_FLAG_VBATH)?((PWR->CR2 & PWR_CR2_VBATH) == PWR_CR2_VBATH) : \
+((__FLAG__) == PWR_FLAG_TEMPL)?((PWR->CR2 & PWR_CR2_TEMPL) == PWR_CR2_TEMPL) : \
+((__FLAG__) == PWR_FLAG_TEMPH)?((PWR->CR2 & PWR_CR2_TEMPH) == PWR_CR2_TEMPH) : \
+((__FLAG__) == PWR_FLAG_11R)?((PWR->CR3 & PWR_CR3_REG11RDY) == PWR_CR3_REG11RDY) : \
+((__FLAG__) == PWR_FLAG_18R)?((PWR->CR3 & PWR_CR3_REG18RDY) == PWR_CR3_REG18RDY) : \
+((__FLAG__) == PWR_FLAG_USB)?((PWR->CR3 & PWR_CR3_USB33RDY) == PWR_CR3_USB33RDY) : \
+((__FLAG__) == PWR_FLAG_SB)?((PWR->MCUCR & PWR_MCUCR_SBF) ==  PWR_MCUCR_SBF) : \
+((__FLAG__) == PWR_FLAG_STOP)?((PWR->MCUCR & PWR_MCUCR_STOPF) == PWR_MCUCR_STOPF) : \
+((PWR->MPUCR & PWR_MPUCR_SBF_MPU) == PWR_MPUCR_SBF_MPU))
+#elif defined (CORE_CA7)
+#define __HAL_PWR_GET_FLAG(__FLAG__) ( \
+((__FLAG__) == PWR_FLAG_PVDO)?((PWR->CSR1 & PWR_CSR1_PVDO) == PWR_CSR1_PVDO) : \
+((__FLAG__) == PWR_FLAG_AVDO)?((PWR->CSR1 & PWR_CSR1_AVDO) == PWR_CSR1_AVDO) : \
+((__FLAG__) == PWR_FLAG_BRR)?((PWR->CR2 & PWR_CR2_BRRDY) == PWR_CR2_BRRDY) : \
+((__FLAG__) == PWR_FLAG_RRR)?((PWR->CR2 & PWR_CR2_RRRDY) == PWR_CR2_RRRDY) : \
+((__FLAG__) == PWR_FLAG_VBATL)?((PWR->CR2 & PWR_CR2_VBATL) == PWR_CR2_VBATL) : \
+((__FLAG__) == PWR_FLAG_VBATH)?((PWR->CR2 & PWR_CR2_VBATH) == PWR_CR2_VBATH) : \
+((__FLAG__) == PWR_FLAG_TEMPL)?((PWR->CR2 & PWR_CR2_TEMPL) == PWR_CR2_TEMPL) : \
+((__FLAG__) == PWR_FLAG_TEMPH)?((PWR->CR2 & PWR_CR2_TEMPH) == PWR_CR2_TEMPH) : \
+((__FLAG__) == PWR_FLAG_11R)?((PWR->CR3 & PWR_CR3_REG11RDY) == PWR_CR3_REG11RDY) : \
+((__FLAG__) == PWR_FLAG_18R)?((PWR->CR3 & PWR_CR3_REG18RDY) == PWR_CR3_REG18RDY) : \
+((__FLAG__) == PWR_FLAG_USB)?((PWR->CR3 & PWR_CR3_USB33RDY) == PWR_CR3_USB33RDY) : \
+((__FLAG__) == PWR_FLAG_SB)?((PWR->MPUCR & PWR_MPUCR_SBF) ==  PWR_MPUCR_SBF) : \
+((__FLAG__) == PWR_FLAG_STOP)?((PWR->MPUCR & PWR_MPUCR_STOPF) == PWR_MPUCR_STOPF) : \
+((PWR->MPUCR & PWR_MPUCR_SBF_MPU) == PWR_MPUCR_SBF_MPU))
+#endif /*CORE_CA7*/
+
+#ifdef CORE_CM4
+/** @brief  Clear the PWR's flags.
+  * @param  __FLAG__: specifies the flag to clear.
+  *           This parameter can be one of the following values:
+  *            @arg @ref PWR_FLAG_STOP
+  *            @arg @ref PWR_FLAG_SB
+  * @retval None.
+  */
+#define __HAL_PWR_CLEAR_FLAG(__FLAG__)  SET_BIT(PWR->MCUCR, PWR_MCUCR_CSSF);
+#elif defined (CORE_CA7)
+/** @brief  Clear the PWR's flags.
+  * @param  __FLAG__: specifies the flag to clear.
+  *           This parameter can be one of the following values:
+  *            @arg @ref PWR_FLAG_STOP
+  *            @arg @ref PWR_FLAG_SB
+  *            @arg @ref PWR_FLAG_CSB flags
+    * @retval None.
+  */
+#define __HAL_PWR_CLEAR_FLAG(__FLAG__)  SET_BIT(PWR->MPUCR, PWR_MPUCR_CSSF);
+
+
+#endif /*CORE_CA7*/
+
+
+/**
+  * @brief Enable the PVD AVD Exti Line.
+  * @retval None.
+  */
+#ifdef CORE_CM4
+#define __HAL_PWR_PVD_AVD_EXTI_ENABLE_IT()  SET_BIT(EXTI_C2->IMR1, PWR_EXTI_LINE_PVD_AVD)
+#elif defined (CORE_CA7)
+#define __HAL_PWR_PVD_AVD_EXTI_ENABLE_IT()  SET_BIT(EXTI_C1->IMR1, PWR_EXTI_LINE_PVD_AVD)
+#endif /*CORE_CA7*/
+
+
+/**
+  * @brief Disable the PVD AVD EXTI Line.
+  * @retval None.
+  */
+#ifdef CORE_CM4
+#define __HAL_PWR_PVD_AVD_EXTI_DISABLE_IT() CLEAR_BIT(EXTI_C2->IMR1, PWR_EXTI_LINE_PVD_AVD)
+#elif defined (CORE_CA7)
+#define __HAL_PWR_PVD_AVD_EXTI_DISABLE_IT() CLEAR_BIT(EXTI_C1->IMR1, PWR_EXTI_LINE_PVD_AVD)
+#endif /*CORE_CA7*/
+
+
+/**
+  * @brief Enable the PVD AVD Extended Interrupt Rising Trigger.
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_AVD_EXTI_ENABLE_RISING_EDGE()  SET_BIT(EXTI->RTSR1, PWR_EXTI_LINE_PVD_AVD)
+
+/**
+  * @brief Disable the PVD AVD Extended Interrupt Rising Trigger.
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_AVD_EXTI_DISABLE_RISING_EDGE()  CLEAR_BIT(EXTI->RTSR1, PWR_EXTI_LINE_PVD_AVD)
+
+
+/**
+  * @brief Enable the PVD AVD Extended Interrupt Falling Trigger.
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_AVD_EXTI_ENABLE_FALLING_EDGE()  SET_BIT(EXTI->FTSR1, PWR_EXTI_LINE_PVD_AVD)
+
+
+/**
+  * @brief Disable the PVD AVD Extended Interrupt Falling Trigger.
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_AVD_EXTI_DISABLE_FALLING_EDGE()  CLEAR_BIT(EXTI->FTSR1, PWR_EXTI_LINE_PVD_AVD)
+
+
+/**
+  * @brief  PVD AVD EXTI line configuration: set rising & falling edge trigger.
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_AVD_EXTI_ENABLE_RISING_FALLING_EDGE() \
+do { \
+      __HAL_PWR_PVD_AVD_EXTI_ENABLE_RISING_EDGE(); \
+      __HAL_PWR_PVD_AVD_EXTI_ENABLE_FALLING_EDGE(); \
+} while(0);
+
+/**
+  * @brief Disable the PVD AVD Extended Interrupt Rising & Falling Trigger.
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_AVD_EXTI_DISABLE_RISING_FALLING_EDGE() \
+do { \
+      __HAL_PWR_PVD_AVD_EXTI_DISABLE_RISING_EDGE(); \
+      __HAL_PWR_PVD_AVD_EXTI_DISABLE_FALLING_EDGE(); \
+} while(0);
+
+
+/**
+  * @brief Check whether the specified PVD AVD EXTI interrupt flag is set or not.
+  * @retval EXTI PVD AVD Line Status.
+  */
+#define __HAL_PWR_PVD_AVD_EXTI_GET_FLAG() \
+        (((EXTI->RPR1 & PWR_EXTI_LINE_PVD_AVD) == PWR_EXTI_LINE_PVD_AVD) || \
+        ((EXTI->FPR1 & PWR_EXTI_LINE_PVD_AVD) == PWR_EXTI_LINE_PVD_AVD))
+
+
+/**
+  * @brief Clear the PVD AVD Exti flag.
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_AVD_EXTI_CLEAR_FLAG() \
+do { \
+      SET_BIT(EXTI->RPR1, PWR_EXTI_LINE_PVD_AVD); \
+      SET_BIT(EXTI->FPR1, PWR_EXTI_LINE_PVD_AVD); \
+} while(0);
+
+
+/**
+  * @brief  Generates a Software interrupt on selected EXTI line.
+  * @retval None
+  */
+/* PVD AVD Event in Bank1 */
+#define __HAL_PWR_PVD_AVD_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER1, PWR_EXTI_LINE_PVD_AVD )
+
+
+/* Include PWR HAL Extension module */
+#include "stm32mp1xx_hal_pwr_ex.h"
+
+/**
+  * @brief  Enable WKUPx pin wakeup interrupt on AIEC for core 2.
+  * @param  __WKUP_LINE__: specifies the WKUP pin line.
+  *         This parameter can be one of the following values:
+  *            @arg AIEC_WKUP1_WAKEUP: Wakeup pin 1 line
+  *            @arg AIEC_WKUP1_WAKEUP: Wakeup pin 2 line
+  *            @arg AIEC_WKUP1_WAKEUP: Wakeup pin 3 line
+  *            @arg AIEC_WKUP1_WAKEUP: Wakeup pin 4 line
+  *            @arg AIEC_WKUP1_WAKEUP: Wakeup pin 5 line
+  *            @arg AIEC_WKUP1_WAKEUP: Wakeup pin 6 line
+  * @retval None
+  */
+#ifdef CORE_CM4
+#define __HAL_WKUP_EXTI_ENABLE_IT(__WKUP_LINE__)          (EXTI_C2->IMR2 |= (__WKUP_LINE__))
+#elif defined(CORE_CA7)
+#define __HAL_WKUP_EXTI_ENABLE_IT(__WKUP_LINE__)          (EXTI_C1->IMR2 |= (__WKUP_LINE__))
+#endif /*CORE_CA7*/
+
+/**
+  * @brief  Disable WKUPx pin wakeup interrupt on AIEC for core 2.
+  *   * @param  __WKUP_LINE__: specifies the WKUP pin line.
+  *         This parameter can be one of the following values:
+  *            @arg AIEC_WKUP1_WAKEUP: Wakeup pin 1 line
+  *            @arg AIEC_WKUP2_WAKEUP: Wakeup pin 2 line
+  *            @arg AIEC_WKUP3_WAKEUP: Wakeup pin 3 line
+  *            @arg AIEC_WKUP4_WAKEUP: Wakeup pin 4 line
+  *            @arg AIEC_WKUP5_WAKEUP: Wakeup pin 5 line
+  *            @arg AIEC_WKUP6_WAKEUP: Wakeup pin 6 line
+  * @retval None
+  */
+#ifdef CORE_CM4
+#define __HAL_WKUP_EXTI_DISABLE_IT(__WKUP_LINE__)         CLEAR_BIT(EXTI_C2->IMR2, __WKUP_LINE__)
+#elif defined(CORE_CA7)
+#define __HAL_WKUP_EXTI_DISABLE_IT(__WKUP_LINE__)         CLEAR_BIT(EXTI_C1->IMR2, __WKUP_LINE__)
+#endif /*CORE_CA7*/
+
+/**
+* @}
+*/
+
+
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup PWR_Exported_Functions PWR Exported Functions
+  * @{
+  */
+
+/** @defgroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+/* Initialization and de-initialization functions *****************************/
+void HAL_PWR_DeInit(void);
+void HAL_PWR_EnableBkUpAccess(void);
+void HAL_PWR_DisableBkUpAccess(void);
+/**
+* @}
+*/
+
+/* Peripheral Control functions  **********************************************/
+/** @defgroup PWR_Exported_Functions_Group2 Peripheral Control functions
+ * @{
+ */
+/* PVD configuration */
+void HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD);
+void HAL_PWR_EnablePVD(void);
+void HAL_PWR_DisablePVD(void);
+
+/* WakeUp pins configuration */
+void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinPolarity);
+void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx);
+
+/* WakeUp pin IT functions */
+void HAL_PWR_EnableWakeUpPinIT(uint32_t WakeUpPinx);
+void HAL_PWR_DisableWakeUpPinIT(uint32_t WakeUpPinx);
+
+
+/* Low Power modes entry */
+void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry);
+void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry);
+void HAL_PWR_EnterSTANDBYMode(void);
+
+
+/* Power PVD IRQ Callback */
+void HAL_PWR_PVDCallback(void);
+
+/**
+* @}
+*/
+
+/* Cortex System Control functions  *******************************************/
+/** @defgroup PWR_Exported_Functions_Group3 Cortex System Control functions
+ * @{
+ */
+void HAL_PWR_EnableSleepOnExit(void);
+void HAL_PWR_DisableSleepOnExit(void);
+void HAL_PWR_EnableSEVOnPend(void);
+void HAL_PWR_DisableSEVOnPend(void);
+/**
+* @}
+*/
+
+/**
+  * @}
+  */
+
+
+/* Private constants ---------------------------------------------------------*/
+
+/** @defgroup PWR_Private_Constants PWR Private Constants
+  * @{
+  */
+
+/** @defgroup PWR_EXTI_LINE_PVD_AVD PWR EXTI Line PVD AVD
+  * @{
+  */
+#define PWR_EXTI_LINE_PVD_AVD   EXTI_IMR1_IM16 /*!< External interrupt line 16
+                                                    Connected to the PVD AVD EXTI
+                                                    Line */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+* @}
+*/
+
+/**
+* @}
+*/
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32MP1xx_HAL_PWR_H */

meta-st/meta-st-stm32mp-addons/mx/stm32mp157d-vrpmdv-mon-mx/Drivers/STM32MP1xx_HAL_Driver/Inc/stm32mp1xx_hal_pwr_ex.h

@@ -0,0 +1,437 @@
+/**
+  ******************************************************************************
+  * @file    stm32mp1xx_hal_pwr_ex.h
+  * @author  MCD Application Team
+  * @brief   Header file of PWR HAL Extension module.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32MP1xx_HAL_PWR_EX_H
+#define __STM32MP1xx_HAL_PWR_EX_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32mp1xx_hal_def.h"
+
+
+
+/** @addtogroup STM32MP1xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup PWREx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup PWREx_Exported_Types PWREx Exported Types
+  * @{
+  */
+/**
+  * @brief  PWREx AVD configuration structure definition
+  */
+typedef struct
+{
+  uint32_t AVDLevel;       /*!<   AVDLevel: Specifies the AVD detection level.
+                                  This parameter can be a value of @ref PWREx AVD detection level */
+  uint32_t Mode;            /*!< Mode: Specifies the operating mode for the selected pins.
+                                  This parameter can be a value of @ref PWREx AVD Mode */
+} PWREx_AVDTypeDef;
+/**
+  * @}
+  */
+
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup PWREx_Exported_Constants PWREx Exported Constants
+  * @{
+  */
+
+/** @defgroup PWREx_Exported_Constants_Group1 PWREx_WakeUp_Pins
+ * @{
+ */
+
+#ifdef CORE_CA7
+/* Defines for legacy purpose */
+#define PWR_WAKEUP_PIN_MASK            PWR_MPUWKUPENR_WKUPEN
+#define PWR_WAKEUP_PIN6                PWR_MPUWKUPENR_WKUPEN_6
+#define PWR_WAKEUP_PIN5                PWR_MPUWKUPENR_WKUPEN_5
+#define PWR_WAKEUP_PIN4                PWR_MPUWKUPENR_WKUPEN_4
+#define PWR_WAKEUP_PIN3                PWR_MPUWKUPENR_WKUPEN_3
+#define PWR_WAKEUP_PIN2                PWR_MPUWKUPENR_WKUPEN_2
+#define PWR_WAKEUP_PIN1                PWR_MPUWKUPENR_WKUPEN_1
+/* Defines for legacy purpose */
+
+/* High level + No pull */
+#define PWR_WAKEUP_PIN6_HIGH            PWR_MPUWKUPENR_WKUPEN_6
+#define PWR_WAKEUP_PIN5_HIGH            PWR_MPUWKUPENR_WKUPEN_5
+#define PWR_WAKEUP_PIN4_HIGH            PWR_MPUWKUPENR_WKUPEN_4
+#define PWR_WAKEUP_PIN3_HIGH            PWR_MPUWKUPENR_WKUPEN_3
+#define PWR_WAKEUP_PIN2_HIGH            PWR_MPUWKUPENR_WKUPEN_2
+#define PWR_WAKEUP_PIN1_HIGH            PWR_MPUWKUPENR_WKUPEN_1
+/* Low level + No pull */
+#define PWR_WAKEUP_PIN6_LOW             (uint32_t)(PWR_WKUPCR_WKUPP_6 | PWR_MPUWKUPENR_WKUPEN_6)
+#define PWR_WAKEUP_PIN5_LOW             (uint32_t)(PWR_WKUPCR_WKUPP_5 | PWR_MPUWKUPENR_WKUPEN_5)
+#define PWR_WAKEUP_PIN4_LOW             (uint32_t)(PWR_WKUPCR_WKUPP_4 | PWR_MPUWKUPENR_WKUPEN_4)
+#define PWR_WAKEUP_PIN3_LOW             (uint32_t)(PWR_WKUPCR_WKUPP_3 | PWR_MPUWKUPENR_WKUPEN_3)
+#define PWR_WAKEUP_PIN2_LOW             (uint32_t)(PWR_WKUPCR_WKUPP_2 | PWR_MPUWKUPENR_WKUPEN_2)
+#define PWR_WAKEUP_PIN1_LOW             (uint32_t)(PWR_WKUPCR_WKUPP_1 | PWR_MPUWKUPENR_WKUPEN_1)
+#endif /*CORE_CA7*/
+
+#ifdef CORE_CM4
+/* Defines for legacy purpose */
+#define PWR_WAKEUP_PIN_MASK            PWR_MCUWKUPENR_WKUPEN
+#define PWR_WAKEUP_PIN6                PWR_MCUWKUPENR_WKUPEN6
+#define PWR_WAKEUP_PIN5                PWR_MCUWKUPENR_WKUPEN5
+#define PWR_WAKEUP_PIN4                PWR_MCUWKUPENR_WKUPEN4
+#define PWR_WAKEUP_PIN3                PWR_MCUWKUPENR_WKUPEN3
+#define PWR_WAKEUP_PIN2                PWR_MCUWKUPENR_WKUPEN2
+#define PWR_WAKEUP_PIN1                PWR_MCUWKUPENR_WKUPEN1
+/* Defines for legacy purpose */
+
+/* High level + No pull */
+#define PWR_WAKEUP_PIN6_HIGH            PWR_MCUWKUPENR_WKUPEN6
+#define PWR_WAKEUP_PIN5_HIGH            PWR_MCUWKUPENR_WKUPEN5
+#define PWR_WAKEUP_PIN4_HIGH            PWR_MCUWKUPENR_WKUPEN4
+#define PWR_WAKEUP_PIN3_HIGH            PWR_MCUWKUPENR_WKUPEN3
+#define PWR_WAKEUP_PIN2_HIGH            PWR_MCUWKUPENR_WKUPEN2
+#define PWR_WAKEUP_PIN1_HIGH            PWR_MCUWKUPENR_WKUPEN1
+/* Low level + No pull */
+#define PWR_WAKEUP_PIN6_LOW             (uint32_t)(PWR_WKUPCR_WKUPP_6 | PWR_MCUWKUPENR_WKUPEN6)
+#define PWR_WAKEUP_PIN5_LOW             (uint32_t)(PWR_WKUPCR_WKUPP_5 | PWR_MCUWKUPENR_WKUPEN5)
+#define PWR_WAKEUP_PIN4_LOW             (uint32_t)(PWR_WKUPCR_WKUPP_4 | PWR_MCUWKUPENR_WKUPEN4)
+#define PWR_WAKEUP_PIN3_LOW             (uint32_t)(PWR_WKUPCR_WKUPP_3 | PWR_MCUWKUPENR_WKUPEN3)
+#define PWR_WAKEUP_PIN2_LOW             (uint32_t)(PWR_WKUPCR_WKUPP_2 | PWR_MCUWKUPENR_WKUPEN2)
+#define PWR_WAKEUP_PIN1_LOW             (uint32_t)(PWR_WKUPCR_WKUPP_1 | PWR_MCUWKUPENR_WKUPEN1)
+#endif /*CORE_CM4*/
+
+/* High level + Pull-up */
+#define PWR_WAKEUP_PIN6_HIGH_PULLUP     (uint32_t)(PWR_MPUWKUPENR_WKUPEN_6 | PWR_WKUPCR_WKUPPUPD6_0 )
+#define PWR_WAKEUP_PIN5_HIGH_PULLUP     (uint32_t)(PWR_MPUWKUPENR_WKUPEN_5 | PWR_WKUPCR_WKUPPUPD5_0 )
+#define PWR_WAKEUP_PIN4_HIGH_PULLUP     (uint32_t)(PWR_MPUWKUPENR_WKUPEN_4 | PWR_WKUPCR_WKUPPUPD4_0 )
+#define PWR_WAKEUP_PIN3_HIGH_PULLUP     (uint32_t)(PWR_MPUWKUPENR_WKUPEN_3 | PWR_WKUPCR_WKUPPUPD3_0 )
+#define PWR_WAKEUP_PIN2_HIGH_PULLUP     (uint32_t)(PWR_MPUWKUPENR_WKUPEN_2 | PWR_WKUPCR_WKUPPUPD2_0 )
+#define PWR_WAKEUP_PIN1_HIGH_PULLUP     (uint32_t)(PWR_MPUWKUPENR_WKUPEN_1 | PWR_WKUPCR_WKUPPUPD1_0 )
+/* Low level + Pull-up */
+#define PWR_WAKEUP_PIN6_LOW_PULLUP      (uint32_t)(PWR_WKUPCR_WKUPP_6 | PWR_MPUWKUPENR_WKUPEN_6 | PWR_WKUPCR_WKUPPUPD6_0)
+#define PWR_WAKEUP_PIN5_LOW_PULLUP      (uint32_t)(PWR_WKUPCR_WKUPP_5 | PWR_MPUWKUPENR_WKUPEN_5 | PWR_WKUPCR_WKUPPUPD5_0)
+#define PWR_WAKEUP_PIN4_LOW_PULLUP      (uint32_t)(PWR_WKUPCR_WKUPP_4 | PWR_MPUWKUPENR_WKUPEN_4 | PWR_WKUPCR_WKUPPUPD4_0)
+#define PWR_WAKEUP_PIN3_LOW_PULLUP      (uint32_t)(PWR_WKUPCR_WKUPP_3 | PWR_MPUWKUPENR_WKUPEN_3 | PWR_WKUPCR_WKUPPUPD3_0)
+#define PWR_WAKEUP_PIN2_LOW_PULLUP      (uint32_t)(PWR_WKUPCR_WKUPP_2 | PWR_MPUWKUPENR_WKUPEN_2 | PWR_WKUPCR_WKUPPUPD2_0)
+#define PWR_WAKEUP_PIN1_LOW_PULLUP      (uint32_t)(PWR_WKUPCR_WKUPP_1 | PWR_MPUWKUPENR_WKUPEN_1 | PWR_WKUPCR_WKUPPUPD1_0)
+/* High level + Pull-down */
+#define PWR_WAKEUP_PIN6_HIGH_PULLDOWN   (uint32_t)(PWR_MPUWKUPENR_WKUPEN_6 | PWR_WKUPCR_WKUPPUPD6_1 )
+#define PWR_WAKEUP_PIN5_HIGH_PULLDOWN   (uint32_t)(PWR_MPUWKUPENR_WKUPEN_5 | PWR_WKUPCR_WKUPPUPD5_1 )
+#define PWR_WAKEUP_PIN4_HIGH_PULLDOWN   (uint32_t)(PWR_MPUWKUPENR_WKUPEN_4 | PWR_WKUPCR_WKUPPUPD4_1 )
+#define PWR_WAKEUP_PIN3_HIGH_PULLDOWN   (uint32_t)(PWR_MPUWKUPENR_WKUPEN_3 | PWR_WKUPCR_WKUPPUPD3_1 )
+#define PWR_WAKEUP_PIN2_HIGH_PULLDOWN   (uint32_t)(PWR_MPUWKUPENR_WKUPEN_2 | PWR_WKUPCR_WKUPPUPD2_1 )
+#define PWR_WAKEUP_PIN1_HIGH_PULLDOWN   (uint32_t)(PWR_MPUWKUPENR_WKUPEN_1 | PWR_WKUPCR_WKUPPUPD1_1 )
+/* Low level + Pull-down */
+#define PWR_WAKEUP_PIN6_LOW_PULLDOWN    (uint32_t)(PWR_WKUPCR_WKUPP_6 | PWR_MPUWKUPENR_WKUPEN_6 | PWR_WKUPCR_WKUPPUPD6_1)
+#define PWR_WAKEUP_PIN5_LOW_PULLDOWN    (uint32_t)(PWR_WKUPCR_WKUPP_5 | PWR_MPUWKUPENR_WKUPEN_5 | PWR_WKUPCR_WKUPPUPD5_1)
+#define PWR_WAKEUP_PIN4_LOW_PULLDOWN    (uint32_t)(PWR_WKUPCR_WKUPP_4 | PWR_MPUWKUPENR_WKUPEN_4 | PWR_WKUPCR_WKUPPUPD4_1)
+#define PWR_WAKEUP_PIN3_LOW_PULLDOWN    (uint32_t)(PWR_WKUPCR_WKUPP_3 | PWR_MPUWKUPENR_WKUPEN_3 | PWR_WKUPCR_WKUPPUPD3_1)
+#define PWR_WAKEUP_PIN2_LOW_PULLDOWN    (uint32_t)(PWR_WKUPCR_WKUPP_2 | PWR_MPUWKUPENR_WKUPEN_2 | PWR_WKUPCR_WKUPPUPD2_1)
+#define PWR_WAKEUP_PIN1_LOW_PULLDOWN    (uint32_t)(PWR_WKUPCR_WKUPP_1 | PWR_MPUWKUPENR_WKUPEN_1 | PWR_WKUPCR_WKUPPUPD1_1)
+/**
+  * @}
+  */
+
+/** @defgroup PWREx_Exported_Constants_Group2 PWREx Wakeup Pins Flags
+ * @{
+ */
+#define PWR_WAKEUP_PIN_FLAG1            PWR_WKUPFR_WKUPF1 /*!< Wakeup event on pin 1 */
+#define PWR_WAKEUP_PIN_FLAG2            PWR_WKUPFR_WKUPF2 /*!< Wakeup event on pin 2 */
+#define PWR_WAKEUP_PIN_FLAG3            PWR_WKUPFR_WKUPF3 /*!< Wakeup event on pin 3 */
+#define PWR_WAKEUP_PIN_FLAG4            PWR_WKUPFR_WKUPF4 /*!< Wakeup event on pin 4 */
+#define PWR_WAKEUP_PIN_FLAG5            PWR_WKUPFR_WKUPF5 /*!< Wakeup event on pin 5 */
+#define PWR_WAKEUP_PIN_FLAG6            PWR_WKUPFR_WKUPF6 /*!< Wakeup event on pin 6 */
+/**
+ * @}
+ */
+
+
+/** @defgroup PWREx_Exported_Constants_Group3 PWREx Core definition
+ * @{
+ */
+#define PWR_CORE_CPU1               ((uint32_t)0x00)
+#define PWR_CORE_CPU2               ((uint32_t)0x01)
+/**
+ * @}
+ */
+
+
+/** @defgroup PWREx_Exported_Constants_Group4 PWREx AVD detection level
+  * @{
+  */
+#define PWR_AVDLEVEL_0  PWR_CR1_ALS_LEV0 /* 1.7 V */
+#define PWR_AVDLEVEL_1  PWR_CR1_ALS_LEV1 /* 2.1 V */
+#define PWR_AVDLEVEL_2  PWR_CR1_ALS_LEV2 /* 2.5 V */
+#define PWR_AVDLEVEL_3  PWR_CR1_ALS_LEV3 /* 2.8 V */
+/**
+  * @}
+  */
+
+/** @defgroup PWREx_Exported_Constants_Group5 PWREx AVD Mode
+  * @{
+  */
+#define PWR_AVD_MODE_NORMAL                ((uint32_t)0x00000000U)   /*!< Basic mode is used */
+#define PWR_AVD_MODE_IT_RISING             ((uint32_t)0x00010001U)   /*!< External Interrupt Mode with Rising edge trigger detection */
+#define PWR_AVD_MODE_IT_FALLING            ((uint32_t)0x00010002U)   /*!< External Interrupt Mode with Falling edge trigger detection */
+#define PWR_AVD_MODE_IT_RISING_FALLING     ((uint32_t)0x00010003U)   /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
+/**
+  * @}
+  */
+
+/** @defgroup PWREx_Exported_Constants_Group6 PWR battery charging resistor selection
+  * @{
+  */
+#define PWR_BATTERY_CHARGING_RESISTOR_5    ((uint32_t)0x00000000U) /*!< VBAT charging through a 5 kOhm resistor   */
+#define PWR_BATTERY_CHARGING_RESISTOR_1_5  PWR_CR3_VBRS            /*!< VBAT charging through a 1.5 kOhm resistor */
+/**
+  * @}
+  */
+
+/** @defgroup PWREx_Exported_Constants_Group7 PWREx VBAT Thresholds
+  * @{
+  */
+#define PWR_VBAT_BETWEEN_HIGH_LOW_THRESHOLD  ((uint32_t)0x00000000U)
+#define PWR_VBAT_BELOW_LOW_THRESHOLD         PWR_CR2_VBATL  /*!< Vsw low threshold is ~1.35V */
+#define PWR_VBAT_ABOVE_HIGH_THRESHOLD        PWR_CR2_VBATH  /*!< Vsw high threshold is ~3.6V */
+/**
+  * @}
+  */
+
+/** @defgroup PWREx_Exported_Constants_Group8 PWREx Temperature Thresholds
+  * @{
+  */
+#define PWR_TEMP_BETWEEN_HIGH_LOW_THRESHOLD  ((uint32_t)0x00000000U)
+#define PWR_TEMP_BELOW_LOW_THRESHOLD         PWR_CR2_TEMPL
+#define PWR_TEMP_ABOVE_HIGH_THRESHOLD        PWR_CR2_TEMPH
+/**
+  * @}
+  */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup PWREx_Exported_Macro PWREx Exported Macro
+  *  @{
+  */
+
+/** @brief  Check Wake Up flag is set or not.
+ * @param  __WUFLAG__: specifies the Wake Up flag to check.
+ *          This parameter can be one of the following values:
+ *            @arg PWR_WAKEUP_PIN_FLAG1: Wakeup Pin Flag 1
+ *            @arg PWR_WAKEUP_PIN_FLAG2: Wakeup Pin Flag 2
+ *            @arg PWR_WAKEUP_PIN_FLAG3: Wakeup Pin Flag 3
+ *            @arg PWR_WAKEUP_PIN_FLAG4: Wakeup Pin Flag 4
+ *            @arg PWR_WAKEUP_PIN_FLAG5: Wakeup Pin Flag 5
+ *            @arg PWR_WAKEUP_PIN_FLAG6: Wakeup Pin Flag 6
+ */
+#define __HAL_PWR_GET_WAKEUP_FLAG(__WUFLAG__) (PWR->WKUPFR & (__WUFLAG__))
+
+/** @brief  Clear the WakeUp pins flags.
+ * @param  __WUFLAG__: specifies the Wake Up pin flag to clear.
+ *          This parameter can be one of the following values:
+ *            @arg PWR_WAKEUP_PIN_FLAG1: Wakeup Pin Flag 1
+ *            @arg PWR_WAKEUP_PIN_FLAG2: Wakeup Pin Flag 2
+ *            @arg PWR_WAKEUP_PIN_FLAG3: Wakeup Pin Flag 3
+ *            @arg PWR_WAKEUP_PIN_FLAG4: Wakeup Pin Flag 4
+ *            @arg PWR_WAKEUP_PIN_FLAG5: Wakeup Pin Flag 5
+ *            @arg PWR_WAKEUP_PIN_FLAG6: Wakeup Pin Flag 6
+ */
+#define __HAL_PWR_CLEAR_WAKEUP_FLAG(__WUFLAG__)   SET_BIT(PWR->WKUPCR, (__WUFLAG__))
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup PWREx_Exported_Functions PWREx Exported Functions
+  * @{
+  */
+
+/** @defgroup PWREx_Exported_Functions_Group1 Low power control functions
+  * @{
+  */
+/* Power core holding functions */
+HAL_StatusTypeDef HAL_PWREx_HoldCore(uint32_t CPU);
+void              HAL_PWREx_ReleaseCore(uint32_t CPU);
+
+
+/* Power Wakeup PIN IRQ Handler */
+void HAL_PWREx_WAKEUP_PIN_IRQHandler(void);
+void HAL_PWREx_WKUP1_Callback(void);
+void HAL_PWREx_WKUP2_Callback(void);
+void HAL_PWREx_WKUP3_Callback(void);
+void HAL_PWREx_WKUP4_Callback(void);
+void HAL_PWREx_WKUP5_Callback(void);
+void HAL_PWREx_WKUP6_Callback(void);
+
+
+/**
+ * @}
+ */
+
+/** @defgroup PWREx_Exported_Functions_Group2 Peripherals control functions
+  * @{
+  */
+/* Backup regulator control functions */
+HAL_StatusTypeDef HAL_PWREx_EnableBkUpReg(void);
+HAL_StatusTypeDef HAL_PWREx_DisableBkUpReg(void);
+
+/* Retention regulator control functions */
+HAL_StatusTypeDef HAL_PWREx_EnableRetReg(void);
+HAL_StatusTypeDef HAL_PWREx_DisableRetReg(void);
+
+/* 1V1 regulator control functions */
+HAL_StatusTypeDef HAL_PWREx_Enable1V1Reg(void);
+HAL_StatusTypeDef HAL_PWREx_Disable1V1Reg(void);
+
+/* 1V8 regulator control functions */
+HAL_StatusTypeDef HAL_PWREx_Enable1V8Reg(void);
+HAL_StatusTypeDef HAL_PWREx_Disable1V8Reg(void);
+
+/* Battery control functions */
+void HAL_PWREx_EnableBatteryCharging(uint32_t ResistorValue);
+void HAL_PWREx_DisableBatteryCharging(void);
+/**
+ * @}
+ */
+
+/** @defgroup PWREx_Exported_Functions_Group3 Power Monitoring functions
+  * @{
+  */
+/* Power VBAT/Temperature monitoring functions */
+void HAL_PWREx_EnableMonitoring(void);
+void HAL_PWREx_DisableMonitoring(void);
+uint32_t HAL_PWREx_GetTemperatureLevel(void);
+uint32_t HAL_PWREx_GetVBATLevel(void);
+
+/* USB Voltage level detector functions */
+HAL_StatusTypeDef HAL_PWREx_EnableUSBVoltageDetector(void);
+HAL_StatusTypeDef HAL_PWREx_DisableUSBVoltageDetector(void);
+
+/* Power AVD configuration functions */
+void HAL_PWREx_ConfigAVD(PWREx_AVDTypeDef *sConfigAVD);
+void HAL_PWREx_EnableAVD(void);
+void HAL_PWREx_DisableAVD(void);
+
+/* Power PVD/AVD IRQ Handler */
+void HAL_PWREx_PVD_AVD_IRQHandler(void);
+void HAL_PWREx_AVDCallback(void);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup PWREx_Private_Macros PWREx Private Macros
+  * @{
+  */
+
+/** @defgroup PWREx_IS_PWR_Definitions PWREx Private macros to check input parameters
+  * @{
+  */
+
+#define IS_PWR_WAKEUP_PIN(__PIN__)         (((__PIN__) == PWR_WAKEUP_PIN1)       || \
+                                           ((__PIN__) == PWR_WAKEUP_PIN2)       || \
+                                           ((__PIN__) == PWR_WAKEUP_PIN3)       || \
+                                           ((__PIN__) == PWR_WAKEUP_PIN4)       || \
+                                           ((__PIN__) == PWR_WAKEUP_PIN5)       || \
+                                           ((__PIN__) == PWR_WAKEUP_PIN6)       || \
+                                           ((__PIN__) == PWR_WAKEUP_PIN1_HIGH)  || \
+                                           ((__PIN__) == PWR_WAKEUP_PIN2_HIGH)  || \
+                                           ((__PIN__) == PWR_WAKEUP_PIN3_HIGH)  || \
+                                           ((__PIN__) == PWR_WAKEUP_PIN4_HIGH)  || \
+                                           ((__PIN__) == PWR_WAKEUP_PIN5_HIGH)  || \
+                                           ((__PIN__) == PWR_WAKEUP_PIN6_HIGH)  || \
+                                           ((__PIN__) == PWR_WAKEUP_PIN1_LOW)   || \
+                                           ((__PIN__) == PWR_WAKEUP_PIN2_LOW)   || \
+                                           ((__PIN__) == PWR_WAKEUP_PIN3_LOW)   || \
+                                           ((__PIN__) == PWR_WAKEUP_PIN4_LOW)   || \
+                                           ((__PIN__) == PWR_WAKEUP_PIN5_LOW)   || \
+                                           ((__PIN__) == PWR_WAKEUP_PIN6_LOW)    || \
+                                           ((__PIN__) == PWR_WAKEUP_PIN6_HIGH_PULLUP)  || \
+                                           ((__PIN__) == PWR_WAKEUP_PIN5_HIGH_PULLUP)  || \
+                                           ((__PIN__) == PWR_WAKEUP_PIN4_HIGH_PULLUP)  || \
+                                           ((__PIN__) == PWR_WAKEUP_PIN3_HIGH_PULLUP)  || \
+                                           ((__PIN__) == PWR_WAKEUP_PIN2_HIGH_PULLUP)  || \
+                                           ((__PIN__) == PWR_WAKEUP_PIN1_HIGH_PULLUP)  || \
+                                           ((__PIN__) == PWR_WAKEUP_PIN6_LOW_PULLUP)   || \
+                                           ((__PIN__) == PWR_WAKEUP_PIN5_LOW_PULLUP)   || \
+                                           ((__PIN__) == PWR_WAKEUP_PIN4_LOW_PULLUP)   || \
+                                           ((__PIN__) == PWR_WAKEUP_PIN3_LOW_PULLUP)   || \
+                                           ((__PIN__) == PWR_WAKEUP_PIN2_LOW_PULLUP)  || \
+                                           ((__PIN__) == PWR_WAKEUP_PIN1_LOW_PULLUP)   || \
+                                           ((__PIN__) == PWR_WAKEUP_PIN6_HIGH_PULLDOWN)   || \
+                                           ((__PIN__) == PWR_WAKEUP_PIN5_HIGH_PULLDOWN)   || \
+                                           ((__PIN__) == PWR_WAKEUP_PIN4_HIGH_PULLDOWN)   || \
+                                           ((__PIN__) == PWR_WAKEUP_PIN3_HIGH_PULLDOWN)   || \
+                                           ((__PIN__) == PWR_WAKEUP_PIN2_HIGH_PULLDOWN)   || \
+                                           ((__PIN__) == PWR_WAKEUP_PIN1_HIGH_PULLDOWN)   || \
+                                           ((__PIN__) == PWR_WAKEUP_PIN6_LOW_PULLDOWN)   || \
+                                           ((__PIN__) == PWR_WAKEUP_PIN5_LOW_PULLDOWN)   || \
+                                           ((__PIN__) == PWR_WAKEUP_PIN4_LOW_PULLDOWN)   || \
+                                           ((__PIN__) == PWR_WAKEUP_PIN3_LOW_PULLDOWN)   || \
+                                           ((__PIN__) == PWR_WAKEUP_PIN2_LOW_PULLDOWN)  || \
+                                           ((__PIN__) == PWR_WAKEUP_PIN1_LOW_PULLDOWN))
+
+#define IS_PWR_AVD_LEVEL(LEVEL)  (((LEVEL) == PWR_AVDLEVEL_0) || ((LEVEL) == PWR_AVDLEVEL_1) || \
+                                  ((LEVEL) == PWR_AVDLEVEL_2) || ((LEVEL) == PWR_AVDLEVEL_3))
+
+#define IS_PWR_AVD_MODE(MODE)  (((MODE) == PWR_AVD_MODE_IT_RISING)|| ((MODE) == PWR_AVD_MODE_IT_FALLING) || \
+                                ((MODE) == PWR_AVD_MODE_IT_RISING_FALLING) || ((MODE) == PWR_AVD_MODE_NORMAL))
+
+#define IS_PWR_BATTERY_RESISTOR_SELECT(RESISTOR)  (((RESISTOR) == PWR_BATTERY_CHARGING_RESISTOR_5) ||\
+                                                   ((RESISTOR) == PWR_BATTERY_CHARGING_RESISTOR_1_5))
+
+#define IS_PWR_CORE(CPU)  (((CPU) == PWR_CORE_CPU1) || ((CPU) == PWR_CORE_CPU2))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32MP1xx_HAL_PWR_EX_H */

meta-st/meta-st-stm32mp-addons/mx/stm32mp157d-vrpmdv-mon-mx/Drivers/STM32MP1xx_HAL_Driver/Inc/stm32mp1xx_hal_tim_ex.h

@@ -0,0 +1,442 @@
+/**
+  ******************************************************************************
+  * @file    stm32mp1xx_hal_tim_ex.h
+  * @author  MCD Application Team
+  * @brief   Header file of TIM HAL Extended module.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32MP1xx_HAL_TIM_EX_H
+#define STM32MP1xx_HAL_TIM_EX_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32mp1xx_hal_def.h"
+
+/** @addtogroup STM32MP1xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup TIMEx
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup TIMEx_Exported_Types TIM Extended Exported Types
+  * @{
+  */
+
+/**
+  * @brief  TIM Hall sensor Configuration Structure definition
+  */
+
+typedef struct
+{
+  uint32_t IC1Polarity;         /*!< Specifies the active edge of the input signal.
+                                     This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+  uint32_t IC1Prescaler;        /*!< Specifies the Input Capture Prescaler.
+                                     This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
+
+  uint32_t IC1Filter;           /*!< Specifies the input capture filter.
+                                     This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+
+  uint32_t Commutation_Delay;   /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
+                                     This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
+} TIM_HallSensor_InitTypeDef;
+
+/**
+  * @brief  TIM Break/Break2 input configuration
+  */
+typedef struct
+{
+  uint32_t Source;         /*!< Specifies the source of the timer break input.
+                                This parameter can be a value of @ref TIMEx_Break_Input_Source */
+  uint32_t Enable;         /*!< Specifies whether or not the break input source is enabled.
+                                This parameter can be a value of @ref TIMEx_Break_Input_Source_Enable */
+  uint32_t Polarity;       /*!< Specifies the break input source polarity.
+                                This parameter can be a value of @ref TIMEx_Break_Input_Source_Polarity
+                                Not relevant when analog watchdog output of the DFSDM1 used as break input source */
+}
+TIMEx_BreakInputConfigTypeDef;
+
+/**
+  * @}
+  */
+/* End of exported types -----------------------------------------------------*/
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup TIMEx_Exported_Constants TIM Extended Exported Constants
+  * @{
+  */
+
+/** @defgroup TIMEx_Remap TIM Extended Remapping
+  * @{
+  */
+#define TIM_TIM1_ETR_GPIO        0x00000000U                                                 /* !< TIM1_ETR is connected to GPIO */
+#define TIM_TIM1_ETR_ADC1_AWD1   (TIM1_AF1_ETRSEL_1 | TIM1_AF1_ETRSEL_0)                     /* !< TIM1_ETR is connected to ADC1 AWD1 */
+#define TIM_TIM1_ETR_ADC1_AWD2   (TIM1_AF1_ETRSEL_2)                                         /* !< TIM1_ETR is connected to ADC1 AWD2 */
+#define TIM_TIM1_ETR_ADC1_AWD3   (TIM1_AF1_ETRSEL_2 | TIM1_AF1_ETRSEL_0)                     /* !< TIM1_ETR is connected to ADC1 AWD3 */
+#define TIM_TIM1_ETR_ADC2_AWD1   (TIM1_AF1_ETRSEL_2 | TIM1_AF1_ETRSEL_1)                     /* !< TIM1_ETR is connected to ADC3 AWD1 */
+#define TIM_TIM1_ETR_ADC2_AWD2   (TIM1_AF1_ETRSEL_2 | TIM1_AF1_ETRSEL_1 | TIM1_AF1_ETRSEL_0) /* !< TIM1_ETR is connected to ADC3 AWD2 */
+#define TIM_TIM1_ETR_ADC2_AWD3   TIM1_AF1_ETRSEL_3                                           /* !< TIM1_ETR is connected to ADC3 AWD3 */
+#if defined(TIM8)
+#define TIM_TIM8_ETR_GPIO        0x00000000U                                                 /* !< TIM8_ETR is connected to GPIO */
+#define TIM_TIM8_ETR_ADC1_AWD1   (TIM8_AF1_ETRSEL_1 | TIM8_AF1_ETRSEL_0)                     /* !< TIM8_ETR is connected to ADC1 AWD1 */
+#define TIM_TIM8_ETR_ADC1_AWD2   (TIM8_AF1_ETRSEL_2)                                         /* !< TIM8_ETR is connected to ADC1 AWD2 */
+#define TIM_TIM8_ETR_ADC1_AWD3   (TIM8_AF1_ETRSEL_2 | TIM8_AF1_ETRSEL_0)                     /* !< TIM8_ETR is connected to ADC1 AWD3 */
+#define TIM_TIM8_ETR_ADC2_AWD1   (TIM8_AF1_ETRSEL_2 | TIM8_AF1_ETRSEL_1)                     /* !< TIM8_ETR is connected to ADC3 AWD1 */
+#define TIM_TIM8_ETR_ADC2_AWD2   (TIM8_AF1_ETRSEL_2 | TIM8_AF1_ETRSEL_1 | TIM8_AF1_ETRSEL_0) /* !< TIM8_ETR is connected to ADC3 AWD2 */
+#define TIM_TIM8_ETR_ADC2_AWD3   TIM8_AF1_ETRSEL_3                                           /* !< TIM8_ETR is connected to ADC3 AWD3 */
+#endif
+#if defined(TIM2)
+#define TIM_TIM2_ETR_GPIO        0x00000000U                                                 /* !< TIM2_ETR is connected to GPIO */
+#define TIM_TIM2_ETR_RCC_LSE     (TIM2_AF1_ETRSEL_1 | TIM2_AF1_ETRSEL_0)                     /* !< TIM2_ETR is connected to RCC LSE */
+#define TIM_TIM2_ETR_SAI1_FSA    (TIM2_AF1_ETRSEL_2)                                         /* !< TIM2_ETR is connected to SAI1 FS_A */
+#define TIM_TIM2_ETR_SAI1_FSB    (TIM2_AF1_ETRSEL_2 | TIM2_AF1_ETRSEL_0)                     /* !< TIM2_ETR is connected to SAI1 FS_B */
+#define TIM_TIM2_ETR_ETH_PPS     (TIM2_AF1_ETRSEL_2 | TIM2_AF1_ETRSEL_1)                     /* !< TIM2_ETR is connected to ETH PPS */
+#endif
+#if defined(TIM3)
+#define TIM_TIM3_ETR_GPIO        0x00000000U                                                 /* !< TIM3_ETR is connected to GPIO */
+#define TIM_TIM3_ETR_ETH_PPS     (TIM3_AF1_ETRSEL_2 | TIM3_AF1_ETRSEL_1)                     /* !< TIM3_ETR is connected to ETH PPS */
+#endif
+#if defined(TIM4)
+#define TIM_TIM4_ETR_GPIO        0x00000000U                                                 /* !< TIM4_ETR is connected to GPIO */
+#endif
+#if defined(TIM5)
+#define TIM_TIM5_ETR_GPIO        0x00000000U                                                 /* !< TIM5_ETR is connected to GPIO */
+#define TIM_TIM5_ETR_SAI2_FSA    TIM5_AF1_ETRSEL_0                                           /* !< TIM5_ETR is connected to SAI2 FS_A */
+#define TIM_TIM5_ETR_SAI2_FSB    TIM5_AF1_ETRSEL_1                                           /* !< TIM5_ETR is connected to SAI2 FS_B */
+#define TIM_TIM5_ETR_OTG_SOF     (TIM5_AF1_ETRSEL_1 | TIM5_AF1_ETRSEL_0)                     /* !< TIM5_ETR is connected to OTG SOF */
+#endif
+/**
+  * @}
+  */
+
+/** @defgroup TIMEx_Break_Input TIM Extended Break input
+  * @{
+  */
+#define TIM_BREAKINPUT_BRK     0x00000001U                                      /* !< Timer break input  */
+#define TIM_BREAKINPUT_BRK2    0x00000002U                                      /* !< Timer break2 input */
+/**
+  * @}
+  */
+
+/** @defgroup TIMEx_Break_Input_Source TIM Extended Break input source
+  * @{
+  */
+#define TIM_BREAKINPUTSOURCE_BKIN     0x00000001U                               /* !< An external source (GPIO) is connected to the BKIN pin  */
+#define TIM_BREAKINPUTSOURCE_DFSDM1   0x00000008U                               /* !< The analog watchdog output of the DFSDM1 peripheral is connected to the break input */
+/**
+  * @}
+  */
+
+/** @defgroup TIMEx_Break_Input_Source_Enable TIM Extended Break input source enabling
+  * @{
+  */
+#define TIM_BREAKINPUTSOURCE_DISABLE     0x00000000U                            /* !< Break input source is disabled */
+#define TIM_BREAKINPUTSOURCE_ENABLE      0x00000001U                            /* !< Break input source is enabled */
+/**
+  * @}
+  */
+
+/** @defgroup TIMEx_Break_Input_Source_Polarity TIM Extended Break input polarity
+  * @{
+  */
+#define TIM_BREAKINPUTSOURCE_POLARITY_LOW     0x00000001U                       /* !< Break input source is active low */
+#define TIM_BREAKINPUTSOURCE_POLARITY_HIGH    0x00000000U                       /* !< Break input source is active_high */
+/**
+  * @}
+  */
+
+/** @defgroup TIMEx_Timer_Input_Selection TIM Extended Timer input selection
+  * @{
+  */
+
+#define TIM_TIM1_TI1_GPIO                          0x00000000UL                              /* !< TIM1_TI1 is connected to GPIO */
+#define TIM_TIM1_TI2_GPIO                          0x00000000UL                              /* !< TIM1_TI2 is connected to GPIO */
+#define TIM_TIM1_TI3_GPIO                          0x00000000UL                              /* !< TIM1_TI3 is connected to GPIO */
+#define TIM_TIM1_TI4_GPIO                          0x00000000UL                              /* !< TIM1_TI4 is connected to GPIO */
+
+#define TIM_TIM8_TI1_GPIO                          0x00000000UL                              /* !< TIM8_TI1 is connected to GPIO */
+#define TIM_TIM8_TI2_GPIO                          0x00000000UL                              /* !< TIM8_TI2 is connected to GPIO */
+#define TIM_TIM8_TI3_GPIO                          0x00000000UL                              /* !< TIM8_TI3 is connected to GPIO */
+#define TIM_TIM8_TI4_GPIO                          0x00000000UL                              /* !< TIM8_TI4 is connected to GPIO */
+
+#define TIM_TIM2_TI1_GPIO                          0x00000000UL                              /* !< TIM2_TI1 is connected to GPIO */
+#define TIM_TIM2_TI2_GPIO                          0x00000000UL                              /* !< TIM2_TI2 is connected to GPIO */
+#define TIM_TIM2_TI3_GPIO                          0x00000000UL                              /* !< TIM2_TI3 is connected to GPIO */
+#define TIM_TIM2_TI4_GPIO                          0x00000000UL                              /* !< TIM2_TI4 is connected to GPIO */
+
+#define TIM_TIM3_TI1_GPIO                          0x00000000UL                              /* !< TIM3_TI1 is connected to GPIO */
+#define TIM_TIM3_TI2_GPIO                          0x00000000UL                              /* !< TIM3_TI2 is connected to GPIO */
+#define TIM_TIM3_TI3_GPIO                          0x00000000UL                              /* !< TIM3_TI3 is connected to GPIO */
+#define TIM_TIM3_TI4_GPIO                          0x00000000UL                              /* !< TIM3_TI4 is connected to GPIO */
+
+#define TIM_TIM4_TI1_GPIO                          0x00000000UL                              /* !< TIM4_TI1 is connected to GPIO */
+#define TIM_TIM4_TI2_GPIO                          0x00000000UL                              /* !< TIM4_TI2 is connected to GPIO */
+#define TIM_TIM4_TI3_GPIO                          0x00000000UL                              /* !< TIM4_TI3 is connected to GPIO */
+#define TIM_TIM4_TI4_GPIO                          0x00000000UL                              /* !< TIM4_TI4 is connected to GPIO */
+
+#define TIM_TIM5_TI1_GPIO                          0x00000000U                               /* !< TIM5_TI1 is connected to GPIO */
+#define TIM_TIM5_TI1_FDCAN1_TMP                    TIM_TISEL_TI1SEL_0                        /* !< TIM5_TI1 is connected to FDCAN1 TMP */
+#define TIM_TIM5_TI1_FDCAN1_RTP                    TIM_TISEL_TI1SEL_1                        /* !< TIM5_TI1 is connected to FDCAN1 RTP */
+#define TIM_TIM5_TI2_GPIO                          0x00000000UL                              /* !< TIM5_TI2 is connected to GPIO */
+#define TIM_TIM5_TI3_GPIO                          0x00000000UL                              /* !< TIM5_TI3 is connected to GPIO */
+#define TIM_TIM5_TI4_GPIO                          0x00000000UL                              /* !< TIM5_TI4 is connected to GPIO */
+
+#define TIM_TIM12_TI1_GPIO                         0x00000000UL                              /* !< TIM12_TI1 is connected to GPIO */
+#define TIM_TIM12_TI1_HSI_CAL_CK                   TIM_TISEL_TI1SEL_0                        /* !< TIM12_TI1 is connected to HSI CAL CK */
+#define TIM_TIM12_TI1_CSI_CAL_CK                   TIM_TISEL_TI1SEL_1                        /* !< TIM12_TI1 is connected to CSI CAL CK */
+#define TIM_TIM12_TI2_GPIO                         0x00000000UL                              /* !< TIM12_TI2 is connected to GPIO */
+
+#define TIM_TIM13_TI1_GPIO                         0x00000000UL                              /* !< TIM13_TI1 is connected to GPIO */
+
+#define TIM_TIM14_TI1_GPIO                         0x00000000UL                              /* !< TIM14_TI1 is connected to GPIO */
+
+#define TIM_TIM15_TI1_GPIO                         0x00000000U                               /* !< TIM15_TI1 is connected to GPIO */
+#define TIM_TIM15_TI1_TIM2_CH1                     TIM_TISEL_TI1SEL_0                        /* !< TIM15_TI1 is connected to TIM2 CH1 */
+#define TIM_TIM15_TI1_TIM3_CH1                     TIM_TISEL_TI1SEL_1                        /* !< TIM15_TI1 is connected to TIM3 CH1 */
+#define TIM_TIM15_TI1_TIM4_CH1                     (TIM_TISEL_TI1SEL_0 | TIM_TISEL_TI1SEL_1) /* !< TIM15_TI1 is connected to TIM4 CH1 */
+#define TIM_TIM15_TI1_RCC_LSE                      (TIM_TISEL_TI1SEL_2)                      /* !< TIM15_TI1 is connected to RCC LSE  */
+#define TIM_TIM15_TI1_RCC_CSI                      (TIM_TISEL_TI1SEL_2 | TIM_TISEL_TI1SEL_0) /* !< TIM15_TI1 is connected to RCC CSI  */
+#define TIM_TIM15_TI1_RCC_MCO2                     (TIM_TISEL_TI1SEL_2 | TIM_TISEL_TI1SEL_1) /* !< TIM15_TI1 is connected to RCC MCO2 */
+#define TIM_TIM15_TI1_HSI_CAL_CK                   (TIM_TISEL_TI1SEL_2 | TIM_TISEL_TI1SEL_1 | TIM_TISEL_TI1SEL_0)  /* !< TIM15_TI1 is connected to HSI CAL CK */
+#define TIM_TIM15_TI1_CSI_CAL_CK                   TIM_TISEL_TI1SEL_3                        /* !< TIM15_TI1 is connected to CSI CAL CK */
+
+#define TIM_TIM15_TI2_GPIO                         0x00000000U                               /* !< TIM15_TI2 is connected to GPIO */
+#define TIM_TIM15_TI2_TIM2_CH2                     (TIM_TISEL_TI2SEL_0)                      /* !< TIM15_TI2 is connected to TIM2 CH2 */
+#define TIM_TIM15_TI2_TIM3_CH2                     (TIM_TISEL_TI2SEL_1)                      /* !< TIM15_TI2 is connected to TIM3 CH2 */
+#define TIM_TIM15_TI2_TIM4_CH2                     (TIM_TISEL_TI2SEL_0 | TIM_TISEL_TI2SEL_1) /* !< TIM15_TI2 is connected to TIM4 CH2 */
+
+#define TIM_TIM16_TI1_GPIO                         0x00000000U                               /* !< TIM16 TI1 is connected to GPIO */
+#define TIM_TIM16_TI1_RCC_LSI                      TIM_TISEL_TI1SEL_0                        /* !< TIM16 TI1 is connected to RCC LSI */
+#define TIM_TIM16_TI1_RCC_LSE                      TIM_TISEL_TI1SEL_1                        /* !< TIM16 TI1 is connected to RCC LSE */
+#define TIM_TIM16_TI1_WKUP_IT                      (TIM_TISEL_TI1SEL_0 | TIM_TISEL_TI1SEL_1) /* !< TIM16 TI1 is connected to WKUP_IT */
+
+#define TIM_TIM17_TI1_GPIO                         0x00000000U                               /* !< TIM17 TI1 is connected to GPIO */
+#define TIM_TIM17_TI1_SPDIFRX_FS                   TIM_TISEL_TI1SEL_0                        /* !< TIM17 TI1 is connected to SPDIF FS */
+#define TIM_TIM17_TI1_RCC_HSE_RTC                  TIM_TISEL_TI1SEL_1                        /* !< TIM17 TI1 is connected to RCC HSE RTC */
+#define TIM_TIM17_TI1_RCC_MCO1                     (TIM_TISEL_TI1SEL_0 | TIM_TISEL_TI1SEL_1) /* !< TIM17 TI1 is connected to RCC MCO1 */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/* End of exported constants -------------------------------------------------*/
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup TIMEx_Exported_Macros TIM Extended Exported Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+/* End of exported macro -----------------------------------------------------*/
+
+/* Private macro -------------------------------------------------------------*/
+/** @defgroup TIMEx_Private_Macros TIM Extended Private Macros
+  * @{
+  */
+#define IS_TIM_REMAP(__REMAP__) ((((__REMAP__) & 0xFFFC3FFFU) == 0x00000000U))
+
+#define IS_TIM_BREAKINPUT(__BREAKINPUT__)  (((__BREAKINPUT__) == TIM_BREAKINPUT_BRK)  || \
+                                            ((__BREAKINPUT__) == TIM_BREAKINPUT_BRK2))
+
+#define IS_TIM_BREAKINPUTSOURCE(__SOURCE__)  ((__SOURCE__) == TIM_BREAKINPUTSOURCE_BKIN)
+
+#define IS_TIM_BREAKINPUTSOURCE_STATE(__STATE__)  (((__STATE__) == TIM_BREAKINPUTSOURCE_DISABLE)  || \
+                                                   ((__STATE__) == TIM_BREAKINPUTSOURCE_ENABLE))
+
+#define IS_TIM_BREAKINPUTSOURCE_POLARITY(__POLARITY__)  (((__POLARITY__) == TIM_BREAKINPUTSOURCE_POLARITY_LOW)  || \
+                                                         ((__POLARITY__) == TIM_BREAKINPUTSOURCE_POLARITY_HIGH))
+
+#define IS_TIM_TISEL(__TISEL__) ((((__TISEL__) & 0xF0F0F0F0U) == 0x00000000U))
+
+
+/**
+  * @}
+  */
+/* End of private macro ------------------------------------------------------*/
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup TIMEx_Exported_Functions TIM Extended Exported Functions
+  * @{
+  */
+
+/** @addtogroup TIMEx_Exported_Functions_Group1 Extended Timer Hall Sensor functions
+  *  @brief    Timer Hall Sensor functions
+  * @{
+  */
+/*  Timer Hall Sensor functions  **********************************************/
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, TIM_HallSensor_InitTypeDef *sConfig);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef *htim);
+
+void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef *htim);
+
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef *htim);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef *htim);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef *htim);
+/**
+  * @}
+  */
+
+/** @addtogroup TIMEx_Exported_Functions_Group2 Extended Timer Complementary Output Compare functions
+  *  @brief   Timer Complementary Output Compare functions
+  * @{
+  */
+/*  Timer Complementary Output Compare functions  *****************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+/**
+  * @}
+  */
+
+/** @addtogroup TIMEx_Exported_Functions_Group3 Extended Timer Complementary PWM functions
+  *  @brief    Timer Complementary PWM functions
+  * @{
+  */
+/*  Timer Complementary PWM functions  ****************************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+/**
+  * @}
+  */
+
+/** @addtogroup TIMEx_Exported_Functions_Group4 Extended Timer Complementary One Pulse functions
+  *  @brief    Timer Complementary One Pulse functions
+  * @{
+  */
+/*  Timer Complementary One Pulse functions  **********************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+/**
+  * @}
+  */
+
+/** @addtogroup TIMEx_Exported_Functions_Group5 Extended Peripheral Control functions
+  *  @brief    Peripheral Control functions
+  * @{
+  */
+/* Extended Control functions  ************************************************/
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent(TIM_HandleTypeDef *htim, uint32_t  InputTrigger,
+                                              uint32_t  CommutationSource);
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_IT(TIM_HandleTypeDef *htim, uint32_t  InputTrigger,
+                                                 uint32_t  CommutationSource);
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_DMA(TIM_HandleTypeDef *htim, uint32_t  InputTrigger,
+                                                  uint32_t  CommutationSource);
+HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim,
+                                                        TIM_MasterConfigTypeDef *sMasterConfig);
+HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim,
+                                                TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig);
+HAL_StatusTypeDef HAL_TIMEx_ConfigBreakInput(TIM_HandleTypeDef *htim, uint32_t BreakInput,
+                                             TIMEx_BreakInputConfigTypeDef *sBreakInputConfig);
+HAL_StatusTypeDef HAL_TIMEx_GroupChannel5(TIM_HandleTypeDef *htim, uint32_t Channels);
+HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap);
+HAL_StatusTypeDef  HAL_TIMEx_TISelection(TIM_HandleTypeDef *htim, uint32_t TISelection, uint32_t Channel);
+
+HAL_StatusTypeDef HAL_TIMEx_DisarmBreakInput(TIM_HandleTypeDef *htim, uint32_t BreakInput);
+HAL_StatusTypeDef HAL_TIMEx_ReArmBreakInput(TIM_HandleTypeDef *htim, uint32_t BreakInput);
+/**
+  * @}
+  */
+
+/** @addtogroup TIMEx_Exported_Functions_Group6 Extended Callbacks functions
+  * @brief    Extended Callbacks functions
+  * @{
+  */
+/* Extended Callback **********************************************************/
+void HAL_TIMEx_CommutCallback(TIM_HandleTypeDef *htim);
+void HAL_TIMEx_CommutHalfCpltCallback(TIM_HandleTypeDef *htim);
+void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim);
+void HAL_TIMEx_Break2Callback(TIM_HandleTypeDef *htim);
+/**
+  * @}
+  */
+
+/** @addtogroup TIMEx_Exported_Functions_Group7 Extended Peripheral State functions
+  * @brief    Extended Peripheral State functions
+  * @{
+  */
+/* Extended Peripheral State functions  ***************************************/
+HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef *htim);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/* End of exported functions -------------------------------------------------*/
+
+/* Private functions----------------------------------------------------------*/
+/** @addtogroup TIMEx_Private_Functions TIMEx Private Functions
+  * @{
+  */
+void TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma);
+void TIMEx_DMACommutationHalfCplt(DMA_HandleTypeDef *hdma);
+/**
+  * @}
+  */
+/* End of private functions --------------------------------------------------*/
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* STM32MP1xx_HAL_TIM_EX_H */

meta-st/meta-st-stm32mp-addons/mx/stm32mp157d-vrpmdv-mon-mx/Drivers/STM32MP1xx_HAL_Driver/Inc/stm32mp1xx_ll_gpio.h

@@ -0,0 +1,982 @@
+/**
+  ******************************************************************************
+  * @file    stm32mp1xx_ll_gpio.h
+  * @author  MCD Application Team
+  * @brief   Header file of GPIO LL module.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32MP1xx_LL_GPIO_H
+#define __STM32MP1xx_LL_GPIO_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32mp1xx.h"
+
+/** @addtogroup STM32MP1xx_LL_Driver
+  * @{
+  */
+
+#if defined (GPIOA) || defined (GPIOB) || defined (GPIOC) || defined (GPIOD) || defined (GPIOE) || defined (GPIOF) || defined (GPIOG) || defined (GPIOH) || defined (GPIOI) || defined (GPIOJ) || defined (GPIOK)
+
+/** @defgroup GPIO_LL GPIO
+  * @{
+  */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup GPIO_LL_Private_Macros GPIO Private Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+#endif /*USE_FULL_LL_DRIVER*/
+
+/* Exported types ------------------------------------------------------------*/
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup GPIO_LL_ES_INIT GPIO Exported Init structures
+  * @{
+  */
+
+/**
+  * @brief LL GPIO Init Structure definition
+  */
+typedef struct
+{
+  uint32_t Pin;          /*!< Specifies the GPIO pins to be configured.
+                              This parameter can be any value of @ref GPIO_LL_EC_PIN */
+
+  uint32_t Mode;         /*!< Specifies the operating mode for the selected pins.
+                              This parameter can be a value of @ref GPIO_LL_EC_MODE.
+
+                              GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinMode().*/
+
+  uint32_t Speed;        /*!< Specifies the speed for the selected pins.
+                              This parameter can be a value of @ref GPIO_LL_EC_SPEED.
+
+                              GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinSpeed().*/
+
+  uint32_t OutputType;   /*!< Specifies the operating output type for the selected pins.
+                              This parameter can be a value of @ref GPIO_LL_EC_OUTPUT.
+
+                              GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinOutputType().*/
+
+  uint32_t Pull;         /*!< Specifies the operating Pull-up/Pull down for the selected pins.
+                              This parameter can be a value of @ref GPIO_LL_EC_PULL.
+
+                              GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinPull().*/
+
+  uint32_t Alternate;    /*!< Specifies the Peripheral to be connected to the selected pins.
+                              This parameter can be a value of @ref GPIO_LL_EC_AF.
+
+                              GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetAFPin_0_7() and LL_GPIO_SetAFPin_8_15().*/
+} LL_GPIO_InitTypeDef;
+
+/**
+  * @}
+  */
+#endif /* USE_FULL_LL_DRIVER */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup GPIO_LL_Exported_Constants GPIO Exported Constants
+  * @{
+  */
+
+/** @defgroup GPIO_LL_EC_PIN PIN
+  * @{
+  */
+#define LL_GPIO_PIN_0                      GPIO_BSRR_BS0 /*!< Select pin 0 */
+#define LL_GPIO_PIN_1                      GPIO_BSRR_BS1 /*!< Select pin 1 */
+#define LL_GPIO_PIN_2                      GPIO_BSRR_BS2 /*!< Select pin 2 */
+#define LL_GPIO_PIN_3                      GPIO_BSRR_BS3 /*!< Select pin 3 */
+#define LL_GPIO_PIN_4                      GPIO_BSRR_BS4 /*!< Select pin 4 */
+#define LL_GPIO_PIN_5                      GPIO_BSRR_BS5 /*!< Select pin 5 */
+#define LL_GPIO_PIN_6                      GPIO_BSRR_BS6 /*!< Select pin 6 */
+#define LL_GPIO_PIN_7                      GPIO_BSRR_BS7 /*!< Select pin 7 */
+#define LL_GPIO_PIN_8                      GPIO_BSRR_BS8 /*!< Select pin 8 */
+#define LL_GPIO_PIN_9                      GPIO_BSRR_BS9 /*!< Select pin 9 */
+#define LL_GPIO_PIN_10                     GPIO_BSRR_BS10 /*!< Select pin 10 */
+#define LL_GPIO_PIN_11                     GPIO_BSRR_BS11 /*!< Select pin 11 */
+#define LL_GPIO_PIN_12                     GPIO_BSRR_BS12 /*!< Select pin 12 */
+#define LL_GPIO_PIN_13                     GPIO_BSRR_BS13 /*!< Select pin 13 */
+#define LL_GPIO_PIN_14                     GPIO_BSRR_BS14 /*!< Select pin 14 */
+#define LL_GPIO_PIN_15                     GPIO_BSRR_BS15 /*!< Select pin 15 */
+#define LL_GPIO_PIN_ALL                    (GPIO_BSRR_BS0 | GPIO_BSRR_BS1  | GPIO_BSRR_BS2  | \
+                                           GPIO_BSRR_BS3  | GPIO_BSRR_BS4  | GPIO_BSRR_BS5  | \
+                                           GPIO_BSRR_BS6  | GPIO_BSRR_BS7  | GPIO_BSRR_BS8  | \
+                                           GPIO_BSRR_BS9  | GPIO_BSRR_BS10 | GPIO_BSRR_BS11 | \
+                                           GPIO_BSRR_BS12 | GPIO_BSRR_BS13 | GPIO_BSRR_BS14 | \
+                                           GPIO_BSRR_BS15) /*!< Select all pins */
+/**
+  * @}
+  */
+
+/** @defgroup GPIO_LL_EC_MODE Mode
+  * @{
+  */
+#define LL_GPIO_MODE_INPUT                 (0x00000000U) /*!< Select input mode */
+#define LL_GPIO_MODE_OUTPUT                GPIO_MODER_MODER0_0  /*!< Select output mode */
+#define LL_GPIO_MODE_ALTERNATE             GPIO_MODER_MODER0_1  /*!< Select alternate function mode */
+#define LL_GPIO_MODE_ANALOG                GPIO_MODER_MODER0    /*!< Select analog mode */
+/**
+  * @}
+  */
+
+/** @defgroup GPIO_LL_EC_OUTPUT Output Type
+  * @{
+  */
+#define LL_GPIO_OUTPUT_PUSHPULL            (0x00000000U) /*!< Select push-pull as output type */
+#define LL_GPIO_OUTPUT_OPENDRAIN           GPIO_OTYPER_OT0 /*!< Select open-drain as output type */
+/**
+  * @}
+  */
+
+/** @defgroup GPIO_LL_EC_SPEED Output Speed
+  * @{
+  */
+#define LL_GPIO_SPEED_FREQ_LOW             (0x00000000U) /*!< Select I/O low output speed    */
+#define LL_GPIO_SPEED_FREQ_MEDIUM          GPIO_OSPEEDR_OSPEEDR0_0 /*!< Select I/O medium output speed */
+#define LL_GPIO_SPEED_FREQ_HIGH            GPIO_OSPEEDR_OSPEEDR0_1 /*!< Select I/O fast output speed   */
+#define LL_GPIO_SPEED_FREQ_VERY_HIGH       GPIO_OSPEEDR_OSPEEDR0   /*!< Select I/O high output speed   */
+/**
+  * @}
+  */
+#define LL_GPIO_SPEED_LOW                  LL_GPIO_SPEED_FREQ_LOW
+#define LL_GPIO_SPEED_MEDIUM               LL_GPIO_SPEED_FREQ_MEDIUM
+#define LL_GPIO_SPEED_FAST                 LL_GPIO_SPEED_FREQ_HIGH
+#define LL_GPIO_SPEED_HIGH                 LL_GPIO_SPEED_FREQ_VERY_HIGH
+
+
+/** @defgroup GPIO_LL_EC_PULL Pull Up Pull Down
+  * @{
+  */
+#define LL_GPIO_PULL_NO                    (0x00000000U) /*!< Select I/O no pull */
+#define LL_GPIO_PULL_UP                    GPIO_PUPDR_PUPDR0_0 /*!< Select I/O pull up */
+#define LL_GPIO_PULL_DOWN                  GPIO_PUPDR_PUPDR0_1 /*!< Select I/O pull down */
+/**
+  * @}
+  */
+
+/** @defgroup GPIO_LL_EC_AF Alternate Function
+  * @{
+  */
+#define LL_GPIO_AF_0                       (0x0000000U) /*!< Select alternate function 0 */
+#define LL_GPIO_AF_1                       (0x0000001U) /*!< Select alternate function 1 */
+#define LL_GPIO_AF_2                       (0x0000002U) /*!< Select alternate function 2 */
+#define LL_GPIO_AF_3                       (0x0000003U) /*!< Select alternate function 3 */
+#define LL_GPIO_AF_4                       (0x0000004U) /*!< Select alternate function 4 */
+#define LL_GPIO_AF_5                       (0x0000005U) /*!< Select alternate function 5 */
+#define LL_GPIO_AF_6                       (0x0000006U) /*!< Select alternate function 6 */
+#define LL_GPIO_AF_7                       (0x0000007U) /*!< Select alternate function 7 */
+#define LL_GPIO_AF_8                       (0x0000008U) /*!< Select alternate function 8 */
+#define LL_GPIO_AF_9                       (0x0000009U) /*!< Select alternate function 9 */
+#define LL_GPIO_AF_10                      (0x000000AU) /*!< Select alternate function 10 */
+#define LL_GPIO_AF_11                      (0x000000BU) /*!< Select alternate function 11 */
+#define LL_GPIO_AF_12                      (0x000000CU) /*!< Select alternate function 12 */
+#define LL_GPIO_AF_13                      (0x000000DU) /*!< Select alternate function 13 */
+#define LL_GPIO_AF_14                      (0x000000EU) /*!< Select alternate function 14 */
+#define LL_GPIO_AF_15                      (0x000000FU) /*!< Select alternate function 15 */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup GPIO_LL_Exported_Macros GPIO Exported Macros
+  * @{
+  */
+
+/** @defgroup GPIO_LL_EM_WRITE_READ Common Write and read registers Macros
+  * @{
+  */
+
+/**
+  * @brief  Write a value in GPIO register
+  * @param  __INSTANCE__ GPIO Instance
+  * @param  __REG__ Register to be written
+  * @param  __VALUE__ Value to be written in the register
+  * @retval None
+  */
+#define LL_GPIO_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__))
+
+/**
+  * @brief  Read a value in GPIO register
+  * @param  __INSTANCE__ GPIO Instance
+  * @param  __REG__ Register to be read
+  * @retval Register value
+  */
+#define LL_GPIO_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__)
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup GPIO_LL_Exported_Functions GPIO Exported Functions
+  * @{
+  */
+
+/** @defgroup GPIO_LL_EF_Port_Configuration Port Configuration
+  * @{
+  */
+
+/**
+  * @brief  Configure gpio mode for a dedicated pin on dedicated port.
+  * @note   I/O mode can be Input mode, General purpose output, Alternate function mode or Analog.
+  * @note   Warning: only one pin can be passed as parameter.
+  * @rmtoll MODER        MODEy         LL_GPIO_SetPinMode
+  * @param  GPIOx GPIO Port
+  * @param  Pin This parameter can be one of the following values:
+  *         @arg @ref LL_GPIO_PIN_0
+  *         @arg @ref LL_GPIO_PIN_1
+  *         @arg @ref LL_GPIO_PIN_2
+  *         @arg @ref LL_GPIO_PIN_3
+  *         @arg @ref LL_GPIO_PIN_4
+  *         @arg @ref LL_GPIO_PIN_5
+  *         @arg @ref LL_GPIO_PIN_6
+  *         @arg @ref LL_GPIO_PIN_7
+  *         @arg @ref LL_GPIO_PIN_8
+  *         @arg @ref LL_GPIO_PIN_9
+  *         @arg @ref LL_GPIO_PIN_10
+  *         @arg @ref LL_GPIO_PIN_11
+  *         @arg @ref LL_GPIO_PIN_12
+  *         @arg @ref LL_GPIO_PIN_13
+  *         @arg @ref LL_GPIO_PIN_14
+  *         @arg @ref LL_GPIO_PIN_15
+  * @param  Mode This parameter can be one of the following values:
+  *         @arg @ref LL_GPIO_MODE_INPUT
+  *         @arg @ref LL_GPIO_MODE_OUTPUT
+  *         @arg @ref LL_GPIO_MODE_ALTERNATE
+  *         @arg @ref LL_GPIO_MODE_ANALOG
+  * @retval None
+  */
+__STATIC_INLINE void LL_GPIO_SetPinMode(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Mode)
+{
+  MODIFY_REG(GPIOx->MODER, ((Pin * Pin) * GPIO_MODER_MODER0), ((Pin * Pin) * Mode));
+}
+
+/**
+  * @brief  Return gpio mode for a dedicated pin on dedicated port.
+  * @note   I/O mode can be Input mode, General purpose output, Alternate function mode or Analog.
+  * @note   Warning: only one pin can be passed as parameter.
+  * @rmtoll MODER        MODEy         LL_GPIO_GetPinMode
+  * @param  GPIOx GPIO Port
+  * @param  Pin This parameter can be one of the following values:
+  *         @arg @ref LL_GPIO_PIN_0
+  *         @arg @ref LL_GPIO_PIN_1
+  *         @arg @ref LL_GPIO_PIN_2
+  *         @arg @ref LL_GPIO_PIN_3
+  *         @arg @ref LL_GPIO_PIN_4
+  *         @arg @ref LL_GPIO_PIN_5
+  *         @arg @ref LL_GPIO_PIN_6
+  *         @arg @ref LL_GPIO_PIN_7
+  *         @arg @ref LL_GPIO_PIN_8
+  *         @arg @ref LL_GPIO_PIN_9
+  *         @arg @ref LL_GPIO_PIN_10
+  *         @arg @ref LL_GPIO_PIN_11
+  *         @arg @ref LL_GPIO_PIN_12
+  *         @arg @ref LL_GPIO_PIN_13
+  *         @arg @ref LL_GPIO_PIN_14
+  *         @arg @ref LL_GPIO_PIN_15
+  * @retval Returned value can be one of the following values:
+  *         @arg @ref LL_GPIO_MODE_INPUT
+  *         @arg @ref LL_GPIO_MODE_OUTPUT
+  *         @arg @ref LL_GPIO_MODE_ALTERNATE
+  *         @arg @ref LL_GPIO_MODE_ANALOG
+  */
+__STATIC_INLINE uint32_t LL_GPIO_GetPinMode(GPIO_TypeDef *GPIOx, uint32_t Pin)
+{
+  return (uint32_t)(READ_BIT(GPIOx->MODER, ((Pin * Pin) * GPIO_MODER_MODER0)) / (Pin * Pin));
+}
+
+/**
+  * @brief  Configure gpio output type for several pins on dedicated port.
+  * @note   Output type as to be set when gpio pin is in output or
+  *         alternate modes. Possible type are Push-pull or Open-drain.
+  * @rmtoll OTYPER       OTy           LL_GPIO_SetPinOutputType
+  * @param  GPIOx GPIO Port
+  * @param  PinMask This parameter can be a combination of the following values:
+  *         @arg @ref LL_GPIO_PIN_0
+  *         @arg @ref LL_GPIO_PIN_1
+  *         @arg @ref LL_GPIO_PIN_2
+  *         @arg @ref LL_GPIO_PIN_3
+  *         @arg @ref LL_GPIO_PIN_4
+  *         @arg @ref LL_GPIO_PIN_5
+  *         @arg @ref LL_GPIO_PIN_6
+  *         @arg @ref LL_GPIO_PIN_7
+  *         @arg @ref LL_GPIO_PIN_8
+  *         @arg @ref LL_GPIO_PIN_9
+  *         @arg @ref LL_GPIO_PIN_10
+  *         @arg @ref LL_GPIO_PIN_11
+  *         @arg @ref LL_GPIO_PIN_12
+  *         @arg @ref LL_GPIO_PIN_13
+  *         @arg @ref LL_GPIO_PIN_14
+  *         @arg @ref LL_GPIO_PIN_15
+  *         @arg @ref LL_GPIO_PIN_ALL
+  * @param  OutputType This parameter can be one of the following values:
+  *         @arg @ref LL_GPIO_OUTPUT_PUSHPULL
+  *         @arg @ref LL_GPIO_OUTPUT_OPENDRAIN
+  * @retval None
+  */
+__STATIC_INLINE void LL_GPIO_SetPinOutputType(GPIO_TypeDef *GPIOx, uint32_t PinMask, uint32_t OutputType)
+{
+  MODIFY_REG(GPIOx->OTYPER, PinMask, (PinMask * OutputType));
+}
+
+/**
+  * @brief  Return gpio output type for several pins on dedicated port.
+  * @note   Output type as to be set when gpio pin is in output or
+  *         alternate modes. Possible type are Push-pull or Open-drain.
+  * @note   Warning: only one pin can be passed as parameter.
+  * @rmtoll OTYPER       OTy           LL_GPIO_GetPinOutputType
+  * @param  GPIOx GPIO Port
+  * @param  Pin This parameter can be one of the following values:
+  *         @arg @ref LL_GPIO_PIN_0
+  *         @arg @ref LL_GPIO_PIN_1
+  *         @arg @ref LL_GPIO_PIN_2
+  *         @arg @ref LL_GPIO_PIN_3
+  *         @arg @ref LL_GPIO_PIN_4
+  *         @arg @ref LL_GPIO_PIN_5
+  *         @arg @ref LL_GPIO_PIN_6
+  *         @arg @ref LL_GPIO_PIN_7
+  *         @arg @ref LL_GPIO_PIN_8
+  *         @arg @ref LL_GPIO_PIN_9
+  *         @arg @ref LL_GPIO_PIN_10
+  *         @arg @ref LL_GPIO_PIN_11
+  *         @arg @ref LL_GPIO_PIN_12
+  *         @arg @ref LL_GPIO_PIN_13
+  *         @arg @ref LL_GPIO_PIN_14
+  *         @arg @ref LL_GPIO_PIN_15
+  *         @arg @ref LL_GPIO_PIN_ALL
+  * @retval Returned value can be one of the following values:
+  *         @arg @ref LL_GPIO_OUTPUT_PUSHPULL
+  *         @arg @ref LL_GPIO_OUTPUT_OPENDRAIN
+  */
+__STATIC_INLINE uint32_t LL_GPIO_GetPinOutputType(GPIO_TypeDef *GPIOx, uint32_t Pin)
+{
+  return (uint32_t)(READ_BIT(GPIOx->OTYPER, Pin) / Pin);
+}
+
+/**
+  * @brief  Configure gpio speed for a dedicated pin on dedicated port.
+  * @note   I/O speed can be Low, Medium, Fast or High speed.
+  * @note   Warning: only one pin can be passed as parameter.
+  * @note   Refer to datasheet for frequency specifications and the power
+  *         supply and load conditions for each speed.
+  * @rmtoll OSPEEDR      OSPEEDy       LL_GPIO_SetPinSpeed
+  * @param  GPIOx GPIO Port
+  * @param  Pin This parameter can be one of the following values:
+  *         @arg @ref LL_GPIO_PIN_0
+  *         @arg @ref LL_GPIO_PIN_1
+  *         @arg @ref LL_GPIO_PIN_2
+  *         @arg @ref LL_GPIO_PIN_3
+  *         @arg @ref LL_GPIO_PIN_4
+  *         @arg @ref LL_GPIO_PIN_5
+  *         @arg @ref LL_GPIO_PIN_6
+  *         @arg @ref LL_GPIO_PIN_7
+  *         @arg @ref LL_GPIO_PIN_8
+  *         @arg @ref LL_GPIO_PIN_9
+  *         @arg @ref LL_GPIO_PIN_10
+  *         @arg @ref LL_GPIO_PIN_11
+  *         @arg @ref LL_GPIO_PIN_12
+  *         @arg @ref LL_GPIO_PIN_13
+  *         @arg @ref LL_GPIO_PIN_14
+  *         @arg @ref LL_GPIO_PIN_15
+  * @param  Speed This parameter can be one of the following values:
+  *         @arg @ref LL_GPIO_SPEED_FREQ_LOW
+  *         @arg @ref LL_GPIO_SPEED_FREQ_MEDIUM
+  *         @arg @ref LL_GPIO_SPEED_FREQ_HIGH
+  *         @arg @ref LL_GPIO_SPEED_FREQ_VERY_HIGH
+  * @retval None
+  */
+__STATIC_INLINE void LL_GPIO_SetPinSpeed(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t  Speed)
+{
+  MODIFY_REG(GPIOx->OSPEEDR, ((Pin * Pin) * GPIO_OSPEEDR_OSPEEDR0), ((Pin * Pin) * Speed));
+}
+
+/**
+  * @brief  Return gpio speed for a dedicated pin on dedicated port.
+  * @note   I/O speed can be Low, Medium, Fast or High speed.
+  * @note   Warning: only one pin can be passed as parameter.
+  * @note   Refer to datasheet for frequency specifications and the power
+  *         supply and load conditions for each speed.
+  * @rmtoll OSPEEDR      OSPEEDy       LL_GPIO_GetPinSpeed
+  * @param  GPIOx GPIO Port
+  * @param  Pin This parameter can be one of the following values:
+  *         @arg @ref LL_GPIO_PIN_0
+  *         @arg @ref LL_GPIO_PIN_1
+  *         @arg @ref LL_GPIO_PIN_2
+  *         @arg @ref LL_GPIO_PIN_3
+  *         @arg @ref LL_GPIO_PIN_4
+  *         @arg @ref LL_GPIO_PIN_5
+  *         @arg @ref LL_GPIO_PIN_6
+  *         @arg @ref LL_GPIO_PIN_7
+  *         @arg @ref LL_GPIO_PIN_8
+  *         @arg @ref LL_GPIO_PIN_9
+  *         @arg @ref LL_GPIO_PIN_10
+  *         @arg @ref LL_GPIO_PIN_11
+  *         @arg @ref LL_GPIO_PIN_12
+  *         @arg @ref LL_GPIO_PIN_13
+  *         @arg @ref LL_GPIO_PIN_14
+  *         @arg @ref LL_GPIO_PIN_15
+  * @retval Returned value can be one of the following values:
+  *         @arg @ref LL_GPIO_SPEED_FREQ_LOW
+  *         @arg @ref LL_GPIO_SPEED_FREQ_MEDIUM
+  *         @arg @ref LL_GPIO_SPEED_FREQ_HIGH
+  *         @arg @ref LL_GPIO_SPEED_FREQ_VERY_HIGH
+  */
+__STATIC_INLINE uint32_t LL_GPIO_GetPinSpeed(GPIO_TypeDef *GPIOx, uint32_t Pin)
+{
+  return (uint32_t)(READ_BIT(GPIOx->OSPEEDR, ((Pin * Pin) * GPIO_OSPEEDR_OSPEEDR0)) / (Pin * Pin));
+}
+
+/**
+  * @brief  Configure gpio pull-up or pull-down for a dedicated pin on a dedicated port.
+  * @note   Warning: only one pin can be passed as parameter.
+  * @rmtoll PUPDR        PUPDy         LL_GPIO_SetPinPull
+  * @param  GPIOx GPIO Port
+  * @param  Pin This parameter can be one of the following values:
+  *         @arg @ref LL_GPIO_PIN_0
+  *         @arg @ref LL_GPIO_PIN_1
+  *         @arg @ref LL_GPIO_PIN_2
+  *         @arg @ref LL_GPIO_PIN_3
+  *         @arg @ref LL_GPIO_PIN_4
+  *         @arg @ref LL_GPIO_PIN_5
+  *         @arg @ref LL_GPIO_PIN_6
+  *         @arg @ref LL_GPIO_PIN_7
+  *         @arg @ref LL_GPIO_PIN_8
+  *         @arg @ref LL_GPIO_PIN_9
+  *         @arg @ref LL_GPIO_PIN_10
+  *         @arg @ref LL_GPIO_PIN_11
+  *         @arg @ref LL_GPIO_PIN_12
+  *         @arg @ref LL_GPIO_PIN_13
+  *         @arg @ref LL_GPIO_PIN_14
+  *         @arg @ref LL_GPIO_PIN_15
+  * @param  Pull This parameter can be one of the following values:
+  *         @arg @ref LL_GPIO_PULL_NO
+  *         @arg @ref LL_GPIO_PULL_UP
+  *         @arg @ref LL_GPIO_PULL_DOWN
+  * @retval None
+  */
+__STATIC_INLINE void LL_GPIO_SetPinPull(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Pull)
+{
+  MODIFY_REG(GPIOx->PUPDR, ((Pin * Pin) * GPIO_PUPDR_PUPDR0), ((Pin * Pin) * Pull));
+}
+
+/**
+  * @brief  Return gpio pull-up or pull-down for a dedicated pin on a dedicated port
+  * @note   Warning: only one pin can be passed as parameter.
+  * @rmtoll PUPDR        PUPDy         LL_GPIO_GetPinPull
+  * @param  GPIOx GPIO Port
+  * @param  Pin This parameter can be one of the following values:
+  *         @arg @ref LL_GPIO_PIN_0
+  *         @arg @ref LL_GPIO_PIN_1
+  *         @arg @ref LL_GPIO_PIN_2
+  *         @arg @ref LL_GPIO_PIN_3
+  *         @arg @ref LL_GPIO_PIN_4
+  *         @arg @ref LL_GPIO_PIN_5
+  *         @arg @ref LL_GPIO_PIN_6
+  *         @arg @ref LL_GPIO_PIN_7
+  *         @arg @ref LL_GPIO_PIN_8
+  *         @arg @ref LL_GPIO_PIN_9
+  *         @arg @ref LL_GPIO_PIN_10
+  *         @arg @ref LL_GPIO_PIN_11
+  *         @arg @ref LL_GPIO_PIN_12
+  *         @arg @ref LL_GPIO_PIN_13
+  *         @arg @ref LL_GPIO_PIN_14
+  *         @arg @ref LL_GPIO_PIN_15
+  * @retval Returned value can be one of the following values:
+  *         @arg @ref LL_GPIO_PULL_NO
+  *         @arg @ref LL_GPIO_PULL_UP
+  *         @arg @ref LL_GPIO_PULL_DOWN
+  */
+__STATIC_INLINE uint32_t LL_GPIO_GetPinPull(GPIO_TypeDef *GPIOx, uint32_t Pin)
+{
+  return (uint32_t)(READ_BIT(GPIOx->PUPDR, ((Pin * Pin) * GPIO_PUPDR_PUPDR0)) / (Pin * Pin));
+}
+
+/**
+  * @brief  Configure gpio alternate function of a dedicated pin from 0 to 7 for a dedicated port.
+  * @note   Possible values are from AF0 to AF15 depending on target.
+  * @note   Warning: only one pin can be passed as parameter.
+  * @rmtoll AFRL         AFRy        LL_GPIO_SetAFPin_0_7
+  * @param  GPIOx GPIO Port
+  * @param  Pin This parameter can be one of the following values:
+  *         @arg @ref LL_GPIO_PIN_0
+  *         @arg @ref LL_GPIO_PIN_1
+  *         @arg @ref LL_GPIO_PIN_2
+  *         @arg @ref LL_GPIO_PIN_3
+  *         @arg @ref LL_GPIO_PIN_4
+  *         @arg @ref LL_GPIO_PIN_5
+  *         @arg @ref LL_GPIO_PIN_6
+  *         @arg @ref LL_GPIO_PIN_7
+  * @param  Alternate This parameter can be one of the following values:
+  *         @arg @ref LL_GPIO_AF_0
+  *         @arg @ref LL_GPIO_AF_1
+  *         @arg @ref LL_GPIO_AF_2
+  *         @arg @ref LL_GPIO_AF_3
+  *         @arg @ref LL_GPIO_AF_4
+  *         @arg @ref LL_GPIO_AF_5
+  *         @arg @ref LL_GPIO_AF_6
+  *         @arg @ref LL_GPIO_AF_7
+  *         @arg @ref LL_GPIO_AF_8
+  *         @arg @ref LL_GPIO_AF_9
+  *         @arg @ref LL_GPIO_AF_10
+  *         @arg @ref LL_GPIO_AF_11
+  *         @arg @ref LL_GPIO_AF_12
+  *         @arg @ref LL_GPIO_AF_13
+  *         @arg @ref LL_GPIO_AF_14
+  *         @arg @ref LL_GPIO_AF_15
+  * @retval None
+  */
+__STATIC_INLINE void LL_GPIO_SetAFPin_0_7(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Alternate)
+{
+  MODIFY_REG(GPIOx->AFR[0], ((((Pin * Pin) * Pin) * Pin) * GPIO_AFRL_AFR0),
+             ((((Pin * Pin) * Pin) * Pin) * Alternate));
+}
+
+/**
+  * @brief  Return gpio alternate function of a dedicated pin from 0 to 7 for a dedicated port.
+  * @rmtoll AFRL         AFRy        LL_GPIO_GetAFPin_0_7
+  * @param  GPIOx GPIO Port
+  * @param  Pin This parameter can be one of the following values:
+  *         @arg @ref LL_GPIO_PIN_0
+  *         @arg @ref LL_GPIO_PIN_1
+  *         @arg @ref LL_GPIO_PIN_2
+  *         @arg @ref LL_GPIO_PIN_3
+  *         @arg @ref LL_GPIO_PIN_4
+  *         @arg @ref LL_GPIO_PIN_5
+  *         @arg @ref LL_GPIO_PIN_6
+  *         @arg @ref LL_GPIO_PIN_7
+  * @retval Returned value can be one of the following values:
+  *         @arg @ref LL_GPIO_AF_0
+  *         @arg @ref LL_GPIO_AF_1
+  *         @arg @ref LL_GPIO_AF_2
+  *         @arg @ref LL_GPIO_AF_3
+  *         @arg @ref LL_GPIO_AF_4
+  *         @arg @ref LL_GPIO_AF_5
+  *         @arg @ref LL_GPIO_AF_6
+  *         @arg @ref LL_GPIO_AF_7
+  *         @arg @ref LL_GPIO_AF_8
+  *         @arg @ref LL_GPIO_AF_9
+  *         @arg @ref LL_GPIO_AF_10
+  *         @arg @ref LL_GPIO_AF_11
+  *         @arg @ref LL_GPIO_AF_12
+  *         @arg @ref LL_GPIO_AF_13
+  *         @arg @ref LL_GPIO_AF_14
+  *         @arg @ref LL_GPIO_AF_15
+  */
+__STATIC_INLINE uint32_t LL_GPIO_GetAFPin_0_7(GPIO_TypeDef *GPIOx, uint32_t Pin)
+{
+  return (uint32_t)(READ_BIT(GPIOx->AFR[0],
+                             ((((Pin * Pin) * Pin) * Pin) * GPIO_AFRL_AFR0)) / (((Pin * Pin) * Pin) * Pin));
+}
+
+/**
+  * @brief  Configure gpio alternate function of a dedicated pin from 8 to 15 for a dedicated port.
+  * @note   Possible values are from AF0 to AF15 depending on target.
+  * @note   Warning: only one pin can be passed as parameter.
+  * @rmtoll AFRH         AFRy        LL_GPIO_SetAFPin_8_15
+  * @param  GPIOx GPIO Port
+  * @param  Pin This parameter can be one of the following values:
+  *         @arg @ref LL_GPIO_PIN_8
+  *         @arg @ref LL_GPIO_PIN_9
+  *         @arg @ref LL_GPIO_PIN_10
+  *         @arg @ref LL_GPIO_PIN_11
+  *         @arg @ref LL_GPIO_PIN_12
+  *         @arg @ref LL_GPIO_PIN_13
+  *         @arg @ref LL_GPIO_PIN_14
+  *         @arg @ref LL_GPIO_PIN_15
+  * @param  Alternate This parameter can be one of the following values:
+  *         @arg @ref LL_GPIO_AF_0
+  *         @arg @ref LL_GPIO_AF_1
+  *         @arg @ref LL_GPIO_AF_2
+  *         @arg @ref LL_GPIO_AF_3
+  *         @arg @ref LL_GPIO_AF_4
+  *         @arg @ref LL_GPIO_AF_5
+  *         @arg @ref LL_GPIO_AF_6
+  *         @arg @ref LL_GPIO_AF_7
+  *         @arg @ref LL_GPIO_AF_8
+  *         @arg @ref LL_GPIO_AF_9
+  *         @arg @ref LL_GPIO_AF_10
+  *         @arg @ref LL_GPIO_AF_11
+  *         @arg @ref LL_GPIO_AF_12
+  *         @arg @ref LL_GPIO_AF_13
+  *         @arg @ref LL_GPIO_AF_14
+  *         @arg @ref LL_GPIO_AF_15
+  * @retval None
+  */
+__STATIC_INLINE void LL_GPIO_SetAFPin_8_15(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Alternate)
+{
+  MODIFY_REG(GPIOx->AFR[1], (((((Pin >> 8U) * (Pin >> 8U)) * (Pin >> 8U)) * (Pin >> 8U)) * GPIO_AFRH_AFR8),
+             (((((Pin >> 8U) * (Pin >> 8U)) * (Pin >> 8U)) * (Pin >> 8U)) * Alternate));
+}
+
+/**
+  * @brief  Return gpio alternate function of a dedicated pin from 8 to 15 for a dedicated port.
+  * @note   Possible values are from AF0 to AF15 depending on target.
+  * @rmtoll AFRH         AFRy        LL_GPIO_GetAFPin_8_15
+  * @param  GPIOx GPIO Port
+  * @param  Pin This parameter can be one of the following values:
+  *         @arg @ref LL_GPIO_PIN_8
+  *         @arg @ref LL_GPIO_PIN_9
+  *         @arg @ref LL_GPIO_PIN_10
+  *         @arg @ref LL_GPIO_PIN_11
+  *         @arg @ref LL_GPIO_PIN_12
+  *         @arg @ref LL_GPIO_PIN_13
+  *         @arg @ref LL_GPIO_PIN_14
+  *         @arg @ref LL_GPIO_PIN_15
+  * @retval Returned value can be one of the following values:
+  *         @arg @ref LL_GPIO_AF_0
+  *         @arg @ref LL_GPIO_AF_1
+  *         @arg @ref LL_GPIO_AF_2
+  *         @arg @ref LL_GPIO_AF_3
+  *         @arg @ref LL_GPIO_AF_4
+  *         @arg @ref LL_GPIO_AF_5
+  *         @arg @ref LL_GPIO_AF_6
+  *         @arg @ref LL_GPIO_AF_7
+  *         @arg @ref LL_GPIO_AF_8
+  *         @arg @ref LL_GPIO_AF_9
+  *         @arg @ref LL_GPIO_AF_10
+  *         @arg @ref LL_GPIO_AF_11
+  *         @arg @ref LL_GPIO_AF_12
+  *         @arg @ref LL_GPIO_AF_13
+  *         @arg @ref LL_GPIO_AF_14
+  *         @arg @ref LL_GPIO_AF_15
+  */
+__STATIC_INLINE uint32_t LL_GPIO_GetAFPin_8_15(GPIO_TypeDef *GPIOx, uint32_t Pin)
+{
+  return (uint32_t)(READ_BIT(GPIOx->AFR[1],
+                             (((((Pin >> 8U) * (Pin >> 8U)) * (Pin >> 8U)) * (Pin >> 8U)) * GPIO_AFRH_AFR8)) / ((((Pin >> 8U) *
+                                 (Pin >> 8U)) * (Pin >> 8U)) * (Pin >> 8U)));
+}
+
+
+/**
+  * @brief  Lock configuration of several pins for a dedicated port.
+  * @note   When the lock sequence has been applied on a port bit, the
+  *         value of this port bit can no longer be modified until the
+  *         next reset.
+  * @note   Each lock bit freezes a specific configuration register
+  *         (control and alternate function registers).
+  * @rmtoll LCKR         LCKK          LL_GPIO_LockPin
+  * @param  GPIOx GPIO Port
+  * @param  PinMask This parameter can be a combination of the following values:
+  *         @arg @ref LL_GPIO_PIN_0
+  *         @arg @ref LL_GPIO_PIN_1
+  *         @arg @ref LL_GPIO_PIN_2
+  *         @arg @ref LL_GPIO_PIN_3
+  *         @arg @ref LL_GPIO_PIN_4
+  *         @arg @ref LL_GPIO_PIN_5
+  *         @arg @ref LL_GPIO_PIN_6
+  *         @arg @ref LL_GPIO_PIN_7
+  *         @arg @ref LL_GPIO_PIN_8
+  *         @arg @ref LL_GPIO_PIN_9
+  *         @arg @ref LL_GPIO_PIN_10
+  *         @arg @ref LL_GPIO_PIN_11
+  *         @arg @ref LL_GPIO_PIN_12
+  *         @arg @ref LL_GPIO_PIN_13
+  *         @arg @ref LL_GPIO_PIN_14
+  *         @arg @ref LL_GPIO_PIN_15
+  *         @arg @ref LL_GPIO_PIN_ALL
+  * @retval None
+  */
+__STATIC_INLINE void LL_GPIO_LockPin(GPIO_TypeDef *GPIOx, uint32_t PinMask)
+{
+  __IO uint32_t temp;
+  WRITE_REG(GPIOx->LCKR, GPIO_LCKR_LCKK | PinMask);
+  WRITE_REG(GPIOx->LCKR, PinMask);
+  WRITE_REG(GPIOx->LCKR, GPIO_LCKR_LCKK | PinMask);
+  /* Read LCKK register. This read is mandatory to complete key lock sequence */
+  temp = READ_REG(GPIOx->LCKR);
+  (void) temp;
+}
+
+/**
+  * @brief  Return 1 if all pins passed as parameter, of a dedicated port, are locked. else Return 0.
+  * @rmtoll LCKR         LCKy          LL_GPIO_IsPinLocked
+  * @param  GPIOx GPIO Port
+  * @param  PinMask This parameter can be a combination of the following values:
+  *         @arg @ref LL_GPIO_PIN_0
+  *         @arg @ref LL_GPIO_PIN_1
+  *         @arg @ref LL_GPIO_PIN_2
+  *         @arg @ref LL_GPIO_PIN_3
+  *         @arg @ref LL_GPIO_PIN_4
+  *         @arg @ref LL_GPIO_PIN_5
+  *         @arg @ref LL_GPIO_PIN_6
+  *         @arg @ref LL_GPIO_PIN_7
+  *         @arg @ref LL_GPIO_PIN_8
+  *         @arg @ref LL_GPIO_PIN_9
+  *         @arg @ref LL_GPIO_PIN_10
+  *         @arg @ref LL_GPIO_PIN_11
+  *         @arg @ref LL_GPIO_PIN_12
+  *         @arg @ref LL_GPIO_PIN_13
+  *         @arg @ref LL_GPIO_PIN_14
+  *         @arg @ref LL_GPIO_PIN_15
+  *         @arg @ref LL_GPIO_PIN_ALL
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_GPIO_IsPinLocked(GPIO_TypeDef *GPIOx, uint32_t PinMask)
+{
+  return (READ_BIT(GPIOx->LCKR, PinMask) == (PinMask));
+}
+
+/**
+  * @brief  Return 1 if one of the pin of a dedicated port is locked. else return 0.
+  * @rmtoll LCKR         LCKK          LL_GPIO_IsAnyPinLocked
+  * @param  GPIOx GPIO Port
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_GPIO_IsAnyPinLocked(GPIO_TypeDef *GPIOx)
+{
+  return (READ_BIT(GPIOx->LCKR, GPIO_LCKR_LCKK) == (GPIO_LCKR_LCKK));
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup GPIO_LL_EF_Data_Access Data Access
+  * @{
+  */
+
+/**
+  * @brief  Return full input data register value for a dedicated port.
+  * @rmtoll IDR          IDy           LL_GPIO_ReadInputPort
+  * @param  GPIOx GPIO Port
+  * @retval Input data register value of port
+  */
+__STATIC_INLINE uint32_t LL_GPIO_ReadInputPort(GPIO_TypeDef *GPIOx)
+{
+  return (uint32_t)(READ_REG(GPIOx->IDR));
+}
+
+/**
+  * @brief  Return if input data level for several pins of dedicated port is high or low.
+  * @rmtoll IDR          IDy           LL_GPIO_IsInputPinSet
+  * @param  GPIOx GPIO Port
+  * @param  PinMask This parameter can be a combination of the following values:
+  *         @arg @ref LL_GPIO_PIN_0
+  *         @arg @ref LL_GPIO_PIN_1
+  *         @arg @ref LL_GPIO_PIN_2
+  *         @arg @ref LL_GPIO_PIN_3
+  *         @arg @ref LL_GPIO_PIN_4
+  *         @arg @ref LL_GPIO_PIN_5
+  *         @arg @ref LL_GPIO_PIN_6
+  *         @arg @ref LL_GPIO_PIN_7
+  *         @arg @ref LL_GPIO_PIN_8
+  *         @arg @ref LL_GPIO_PIN_9
+  *         @arg @ref LL_GPIO_PIN_10
+  *         @arg @ref LL_GPIO_PIN_11
+  *         @arg @ref LL_GPIO_PIN_12
+  *         @arg @ref LL_GPIO_PIN_13
+  *         @arg @ref LL_GPIO_PIN_14
+  *         @arg @ref LL_GPIO_PIN_15
+  *         @arg @ref LL_GPIO_PIN_ALL
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_GPIO_IsInputPinSet(GPIO_TypeDef *GPIOx, uint32_t PinMask)
+{
+  return (READ_BIT(GPIOx->IDR, PinMask) == (PinMask));
+}
+
+/**
+  * @brief  Write output data register for the port.
+  * @rmtoll ODR          ODy           LL_GPIO_WriteOutputPort
+  * @param  GPIOx GPIO Port
+  * @param  PortValue Level value for each pin of the port
+  * @retval None
+  */
+__STATIC_INLINE void LL_GPIO_WriteOutputPort(GPIO_TypeDef *GPIOx, uint32_t PortValue)
+{
+  WRITE_REG(GPIOx->ODR, PortValue);
+}
+
+/**
+  * @brief  Return full output data register value for a dedicated port.
+  * @rmtoll ODR          ODy           LL_GPIO_ReadOutputPort
+  * @param  GPIOx GPIO Port
+  * @retval Output data register value of port
+  */
+__STATIC_INLINE uint32_t LL_GPIO_ReadOutputPort(GPIO_TypeDef *GPIOx)
+{
+  return (uint32_t)(READ_REG(GPIOx->ODR));
+}
+
+/**
+  * @brief  Return if input data level for several pins of dedicated port is high or low.
+  * @rmtoll ODR          ODy           LL_GPIO_IsOutputPinSet
+  * @param  GPIOx GPIO Port
+  * @param  PinMask This parameter can be a combination of the following values:
+  *         @arg @ref LL_GPIO_PIN_0
+  *         @arg @ref LL_GPIO_PIN_1
+  *         @arg @ref LL_GPIO_PIN_2
+  *         @arg @ref LL_GPIO_PIN_3
+  *         @arg @ref LL_GPIO_PIN_4
+  *         @arg @ref LL_GPIO_PIN_5
+  *         @arg @ref LL_GPIO_PIN_6
+  *         @arg @ref LL_GPIO_PIN_7
+  *         @arg @ref LL_GPIO_PIN_8
+  *         @arg @ref LL_GPIO_PIN_9
+  *         @arg @ref LL_GPIO_PIN_10
+  *         @arg @ref LL_GPIO_PIN_11
+  *         @arg @ref LL_GPIO_PIN_12
+  *         @arg @ref LL_GPIO_PIN_13
+  *         @arg @ref LL_GPIO_PIN_14
+  *         @arg @ref LL_GPIO_PIN_15
+  *         @arg @ref LL_GPIO_PIN_ALL
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_GPIO_IsOutputPinSet(GPIO_TypeDef *GPIOx, uint32_t PinMask)
+{
+  return (READ_BIT(GPIOx->ODR, PinMask) == (PinMask));
+}
+
+/**
+  * @brief  Set several pins to high level on dedicated gpio port.
+  * @rmtoll BSRR         BSy           LL_GPIO_SetOutputPin
+  * @param  GPIOx GPIO Port
+  * @param  PinMask This parameter can be a combination of the following values:
+  *         @arg @ref LL_GPIO_PIN_0
+  *         @arg @ref LL_GPIO_PIN_1
+  *         @arg @ref LL_GPIO_PIN_2
+  *         @arg @ref LL_GPIO_PIN_3
+  *         @arg @ref LL_GPIO_PIN_4
+  *         @arg @ref LL_GPIO_PIN_5
+  *         @arg @ref LL_GPIO_PIN_6
+  *         @arg @ref LL_GPIO_PIN_7
+  *         @arg @ref LL_GPIO_PIN_8
+  *         @arg @ref LL_GPIO_PIN_9
+  *         @arg @ref LL_GPIO_PIN_10
+  *         @arg @ref LL_GPIO_PIN_11
+  *         @arg @ref LL_GPIO_PIN_12
+  *         @arg @ref LL_GPIO_PIN_13
+  *         @arg @ref LL_GPIO_PIN_14
+  *         @arg @ref LL_GPIO_PIN_15
+  *         @arg @ref LL_GPIO_PIN_ALL
+  * @retval None
+  */
+__STATIC_INLINE void LL_GPIO_SetOutputPin(GPIO_TypeDef *GPIOx, uint32_t PinMask)
+{
+  WRITE_REG(GPIOx->BSRR, PinMask);
+}
+
+/**
+  * @brief  Set several pins to low level on dedicated gpio port.
+  * @rmtoll BSRR         BRy           LL_GPIO_ResetOutputPin
+  * @param  GPIOx GPIO Port
+  * @param  PinMask This parameter can be a combination of the following values:
+  *         @arg @ref LL_GPIO_PIN_0
+  *         @arg @ref LL_GPIO_PIN_1
+  *         @arg @ref LL_GPIO_PIN_2
+  *         @arg @ref LL_GPIO_PIN_3
+  *         @arg @ref LL_GPIO_PIN_4
+  *         @arg @ref LL_GPIO_PIN_5
+  *         @arg @ref LL_GPIO_PIN_6
+  *         @arg @ref LL_GPIO_PIN_7
+  *         @arg @ref LL_GPIO_PIN_8
+  *         @arg @ref LL_GPIO_PIN_9
+  *         @arg @ref LL_GPIO_PIN_10
+  *         @arg @ref LL_GPIO_PIN_11
+  *         @arg @ref LL_GPIO_PIN_12
+  *         @arg @ref LL_GPIO_PIN_13
+  *         @arg @ref LL_GPIO_PIN_14
+  *         @arg @ref LL_GPIO_PIN_15
+  *         @arg @ref LL_GPIO_PIN_ALL
+  * @retval None
+  */
+__STATIC_INLINE void LL_GPIO_ResetOutputPin(GPIO_TypeDef *GPIOx, uint32_t PinMask)
+{
+  WRITE_REG(GPIOx->BSRR, PinMask << 16U);
+}
+
+/**
+  * @brief  Toggle data value for several pin of dedicated port.
+  * @rmtoll ODR          ODy           LL_GPIO_TogglePin
+  * @param  GPIOx GPIO Port
+  * @param  PinMask This parameter can be a combination of the following values:
+  *         @arg @ref LL_GPIO_PIN_0
+  *         @arg @ref LL_GPIO_PIN_1
+  *         @arg @ref LL_GPIO_PIN_2
+  *         @arg @ref LL_GPIO_PIN_3
+  *         @arg @ref LL_GPIO_PIN_4
+  *         @arg @ref LL_GPIO_PIN_5
+  *         @arg @ref LL_GPIO_PIN_6
+  *         @arg @ref LL_GPIO_PIN_7
+  *         @arg @ref LL_GPIO_PIN_8
+  *         @arg @ref LL_GPIO_PIN_9
+  *         @arg @ref LL_GPIO_PIN_10
+  *         @arg @ref LL_GPIO_PIN_11
+  *         @arg @ref LL_GPIO_PIN_12
+  *         @arg @ref LL_GPIO_PIN_13
+  *         @arg @ref LL_GPIO_PIN_14
+  *         @arg @ref LL_GPIO_PIN_15
+  *         @arg @ref LL_GPIO_PIN_ALL
+  * @retval None
+  */
+__STATIC_INLINE void LL_GPIO_TogglePin(GPIO_TypeDef *GPIOx, uint32_t PinMask)
+{
+  WRITE_REG(GPIOx->ODR, READ_REG(GPIOx->ODR) ^ PinMask);
+}
+
+/**
+  * @}
+  */
+
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup GPIO_LL_EF_Init Initialization and de-initialization functions
+  * @{
+  */
+
+ErrorStatus LL_GPIO_DeInit(GPIO_TypeDef *GPIOx);
+ErrorStatus LL_GPIO_Init(GPIO_TypeDef *GPIOx, LL_GPIO_InitTypeDef *GPIO_InitStruct);
+void        LL_GPIO_StructInit(LL_GPIO_InitTypeDef *GPIO_InitStruct);
+
+/**
+  * @}
+  */
+#endif /* USE_FULL_LL_DRIVER */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* defined (GPIOA) || defined (GPIOB) || defined (GPIOC) || defined (GPIOD) || defined (GPIOE) || defined (GPIOF) */
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32MP1xx_LL_GPIO_H */

meta-st/meta-st-stm32mp-addons/mx/stm32mp157d-vrpmdv-mon-mx/Drivers/STM32MP1xx_HAL_Driver/Inc/stm32mp1xx_ll_hsem.h

@@ -0,0 +1,606 @@
+/**
+  ******************************************************************************
+  * @file    stm32mp1xx_ll_hsem.h
+  * @author  MCD Application Team
+  * @brief   Header file of HSEM LL module.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32MP1xx_LL_HSEM_H
+#define STM32MP1xx_LL_HSEM_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32mp1xx.h"
+
+/** @addtogroup STM32MP1xx_LL_Driver
+  * @{
+  */
+
+#if defined(HSEM)
+
+/** @defgroup HSEM_LL HSEM
+  * @{
+  */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup HSEM_LL_Exported_Constants HSEM Exported Constants
+  * @{
+  */
+
+/** @defgroup HSEM_LL_EC_COREID COREID Defines
+  * @{
+  */
+#define LL_HSEM_COREID_NONE             0U
+#define LL_HSEM_COREID_CPU1             HSEM_CR_COREID_CPU1
+#define LL_HSEM_COREID                  HSEM_CR_COREID_CURRENT
+/**
+  * @}
+  */
+
+/** @defgroup HSEM_LL_EC_GET_FLAG Get Flags Defines
+  * @brief    Flags defines which can be used with LL_HSEM_ReadReg function
+  * @{
+  */
+
+#define LL_HSEM_SEMAPHORE_0                HSEM_C1IER_ISE0
+#define LL_HSEM_SEMAPHORE_1                HSEM_C1IER_ISE1
+#define LL_HSEM_SEMAPHORE_2                HSEM_C1IER_ISE2
+#define LL_HSEM_SEMAPHORE_3                HSEM_C1IER_ISE3
+#define LL_HSEM_SEMAPHORE_4                HSEM_C1IER_ISE4
+#define LL_HSEM_SEMAPHORE_5                HSEM_C1IER_ISE5
+#define LL_HSEM_SEMAPHORE_6                HSEM_C1IER_ISE6
+#define LL_HSEM_SEMAPHORE_7                HSEM_C1IER_ISE7
+#define LL_HSEM_SEMAPHORE_8                HSEM_C1IER_ISE8
+#define LL_HSEM_SEMAPHORE_9                HSEM_C1IER_ISE9
+#define LL_HSEM_SEMAPHORE_10               HSEM_C1IER_ISE10
+#define LL_HSEM_SEMAPHORE_11               HSEM_C1IER_ISE11
+#define LL_HSEM_SEMAPHORE_12               HSEM_C1IER_ISE12
+#define LL_HSEM_SEMAPHORE_13               HSEM_C1IER_ISE13
+#define LL_HSEM_SEMAPHORE_14               HSEM_C1IER_ISE14
+#define LL_HSEM_SEMAPHORE_15               HSEM_C1IER_ISE15
+#define LL_HSEM_SEMAPHORE_16               HSEM_C1IER_ISE16
+#define LL_HSEM_SEMAPHORE_17               HSEM_C1IER_ISE17
+#define LL_HSEM_SEMAPHORE_18               HSEM_C1IER_ISE18
+#define LL_HSEM_SEMAPHORE_19               HSEM_C1IER_ISE19
+#define LL_HSEM_SEMAPHORE_20               HSEM_C1IER_ISE20
+#define LL_HSEM_SEMAPHORE_21               HSEM_C1IER_ISE21
+#define LL_HSEM_SEMAPHORE_22               HSEM_C1IER_ISE22
+#define LL_HSEM_SEMAPHORE_23               HSEM_C1IER_ISE23
+#define LL_HSEM_SEMAPHORE_24               HSEM_C1IER_ISE24
+#define LL_HSEM_SEMAPHORE_25               HSEM_C1IER_ISE25
+#define LL_HSEM_SEMAPHORE_26               HSEM_C1IER_ISE26
+#define LL_HSEM_SEMAPHORE_27               HSEM_C1IER_ISE27
+#define LL_HSEM_SEMAPHORE_28               HSEM_C1IER_ISE28
+#define LL_HSEM_SEMAPHORE_29               HSEM_C1IER_ISE29
+#define LL_HSEM_SEMAPHORE_30               HSEM_C1IER_ISE30
+#define LL_HSEM_SEMAPHORE_31               HSEM_C1IER_ISE31
+#define LL_HSEM_SEMAPHORE_ALL              0xFFFFFFFFU
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup HSEM_LL_Exported_Macros HSEM Exported Macros
+  * @{
+  */
+
+/** @defgroup HSEM_LL_EM_WRITE_READ Common Write and read registers Macros
+  * @{
+  */
+
+/**
+  * @brief  Write a value in HSEM register
+  * @param  __INSTANCE__ HSEM Instance
+  * @param  __REG__ Register to be written
+  * @param  __VALUE__ Value to be written in the register
+  * @retval None
+  */
+#define LL_HSEM_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__))
+
+/**
+  * @brief  Read a value in HSEM register
+  * @param  __INSTANCE__ HSEM Instance
+  * @param  __REG__ Register to be read
+  * @retval Register value
+  */
+#define LL_HSEM_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__)
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup HSEM_LL_Exported_Functions HSEM Exported Functions
+  * @{
+  */
+
+/** @defgroup HSEM_LL_EF_Data_Management Data_Management
+  * @{
+  */
+
+
+/**
+  * @brief  Return 1 if the semaphore is locked, else return 0.
+  * @rmtoll R            LOCK          LL_HSEM_IsSemaphoreLocked
+  * @param  HSEMx HSEM Instance.
+  * @param  Semaphore Semaphore number. Value between Min_Data=0 and Max_Data=31
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_HSEM_IsSemaphoreLocked(HSEM_TypeDef *HSEMx, uint32_t Semaphore)
+{
+  return ((READ_BIT(HSEMx->R[Semaphore], HSEM_R_LOCK) == (HSEM_R_LOCK_Msk)) ? 1UL : 0UL);
+}
+
+/**
+  * @brief  Get core id.
+  * @rmtoll R            COREID        LL_HSEM_GetCoreId
+  * @param  HSEMx HSEM Instance.
+  * @param  Semaphore Semaphore number. Value between Min_Data=0 and Max_Data=31
+  * @retval Returned value can be one of the following values:
+  *         @arg @ref LL_HSEM_COREID_NONE
+  *         @arg @ref LL_HSEM_COREID_CPU1
+  */
+__STATIC_INLINE uint32_t LL_HSEM_GetCoreId(HSEM_TypeDef *HSEMx, uint32_t Semaphore)
+{
+  return (uint32_t)(READ_BIT(HSEMx->R[Semaphore], HSEM_R_COREID_Msk));
+}
+
+/**
+  * @brief  Get process id.
+  * @rmtoll R            PROCID        LL_HSEM_GetProcessId
+  * @param  HSEMx HSEM Instance.
+  * @param  Semaphore Semaphore number. Value between Min_Data=0 and Max_Data=31
+  * @retval Process number. Value between Min_Data=0 and Max_Data=255
+  */
+__STATIC_INLINE uint32_t LL_HSEM_GetProcessId(HSEM_TypeDef *HSEMx, uint32_t Semaphore)
+{
+  return (uint32_t)(READ_BIT(HSEMx->R[Semaphore], HSEM_R_PROCID_Msk));
+}
+
+/**
+  * @brief  Get the lock by writing in R register.
+  * @note The R register has to be read to determined if the lock is taken.
+  * @rmtoll R            LOCK          LL_HSEM_SetLock
+  * @rmtoll R            COREID        LL_HSEM_SetLock
+  * @rmtoll R            PROCID        LL_HSEM_SetLock
+  * @param  HSEMx HSEM Instance.
+  * @param  Semaphore Semaphore number. Value between Min_Data=0 and Max_Data=31
+  * @param  process Process id. Value between Min_Data=0 and Max_Data=255
+  * @retval None
+  */
+__STATIC_INLINE void LL_HSEM_SetLock(HSEM_TypeDef *HSEMx, uint32_t Semaphore, uint32_t process)
+{
+  WRITE_REG(HSEMx->R[Semaphore], (HSEM_R_LOCK | LL_HSEM_COREID | process));
+}
+
+/**
+  * @brief  Get the lock with 2-step lock.
+  * @rmtoll R            LOCK          LL_HSEM_2StepLock
+  * @rmtoll R            COREID        LL_HSEM_2StepLock
+  * @rmtoll R            PROCID        LL_HSEM_2StepLock
+  * @param  HSEMx HSEM Instance.
+  * @param  Semaphore Semaphore number. Value between Min_Data=0 and Max_Data=31
+  * @param  process Process id. Value between Min_Data=0 and Max_Data=255
+  * @retval 1 lock fail, 0 lock successful or already locked by same process and core
+  */
+__STATIC_INLINE uint32_t LL_HSEM_2StepLock(HSEM_TypeDef *HSEMx, uint32_t Semaphore, uint32_t process)
+{
+  WRITE_REG(HSEMx->R[Semaphore], (HSEM_R_LOCK | LL_HSEM_COREID | process));
+  return ((HSEMx->R[Semaphore] != (HSEM_R_LOCK | LL_HSEM_COREID | process)) ? 1UL : 0UL);
+}
+
+/**
+  * @brief  Get the lock with 1-step lock.
+  * @rmtoll RLR          LOCK          LL_HSEM_1StepLock
+  * @rmtoll RLR          COREID        LL_HSEM_1StepLock
+  * @rmtoll RLR          PROCID        LL_HSEM_1StepLock
+  * @param  HSEMx HSEM Instance.
+  * @param  Semaphore Semaphore number. Value between Min_Data=0 and Max_Data=31
+  * @retval 1 lock fail, 0 lock successful or already locked by same core
+  */
+__STATIC_INLINE uint32_t LL_HSEM_1StepLock(HSEM_TypeDef *HSEMx, uint32_t Semaphore)
+{
+  return ((HSEMx->RLR[Semaphore] != (HSEM_R_LOCK | LL_HSEM_COREID)) ? 1UL : 0UL);
+}
+
+/**
+  * @brief  Release the lock of the semaphore.
+  * @note In case of LL_HSEM_1StepLock usage to lock a semaphore, the process is 0.
+  * @rmtoll R            LOCK          LL_HSEM_ReleaseLock
+  * @param  HSEMx HSEM Instance.
+  * @param  Semaphore Semaphore number. Value between Min_Data=0 and Max_Data=31
+  * @param  process Process number. Value between Min_Data=0 and Max_Data=255
+  * @retval None
+  */
+__STATIC_INLINE void LL_HSEM_ReleaseLock(HSEM_TypeDef *HSEMx, uint32_t Semaphore, uint32_t process)
+{
+  WRITE_REG(HSEMx->R[Semaphore], (LL_HSEM_COREID | process));
+}
+
+/**
+  * @brief  Get the lock status of the semaphore.
+  * @rmtoll R            LOCK          LL_HSEM_GetStatus
+  * @param  HSEMx HSEM Instance.
+  * @param  Semaphore Semaphore number. Value between Min_Data=0 and Max_Data=31
+  * @retval 0 semaphore is free, 1 semaphore is locked  */
+__STATIC_INLINE uint32_t LL_HSEM_GetStatus(HSEM_TypeDef *HSEMx, uint32_t Semaphore)
+{
+  return ((HSEMx->R[Semaphore] != 0U) ? 1UL : 0UL);
+}
+
+/**
+  * @brief  Set the key.
+  * @rmtoll KEYR         KEY           LL_HSEM_SetKey
+  * @param  HSEMx HSEM Instance.
+  * @param  key Key value.
+  * @retval None
+  */
+__STATIC_INLINE void LL_HSEM_SetKey(HSEM_TypeDef *HSEMx, uint32_t key)
+{
+  WRITE_REG(HSEMx->KEYR, key << HSEM_KEYR_KEY_Pos);
+}
+
+/**
+  * @brief  Get the key.
+  * @rmtoll KEYR         KEY           LL_HSEM_GetKey
+  * @param  HSEMx HSEM Instance.
+  * @retval key to unlock all semaphore from the same core
+  */
+__STATIC_INLINE uint32_t LL_HSEM_GetKey(HSEM_TypeDef *HSEMx)
+{
+  return (uint32_t)(READ_BIT(HSEMx->KEYR, HSEM_KEYR_KEY) >> HSEM_KEYR_KEY_Pos);
+}
+
+/**
+  * @brief  Release all semaphore with the same core id.
+  * @rmtoll CR           KEY           LL_HSEM_ResetAllLock
+  * @param  HSEMx HSEM Instance.
+  * @param  key Key value.
+  * @param  core This parameter can be one of the following values:
+  *         @arg @ref LL_HSEM_COREID_CPU1
+  * @retval None
+  */
+__STATIC_INLINE void LL_HSEM_ResetAllLock(HSEM_TypeDef *HSEMx, uint32_t key, uint32_t core)
+{
+  WRITE_REG(HSEMx->CR, (key << HSEM_CR_KEY_Pos) | core);
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup HSEM_LL_EF_IT_Management IT_Management
+  * @{
+  */
+
+/**
+  * @brief  Enable interrupt.
+  * @rmtoll C1IER         ISEM          LL_HSEM_EnableIT_C1IER
+  * @param  HSEMx HSEM Instance.
+  * @param  SemaphoreMask This parameter can be a combination of the following values:
+  *         @arg @ref LL_HSEM_SEMAPHORE_0
+  *         @arg @ref LL_HSEM_SEMAPHORE_1
+  *         @arg @ref LL_HSEM_SEMAPHORE_2
+  *         @arg @ref LL_HSEM_SEMAPHORE_3
+  *         @arg @ref LL_HSEM_SEMAPHORE_4
+  *         @arg @ref LL_HSEM_SEMAPHORE_5
+  *         @arg @ref LL_HSEM_SEMAPHORE_6
+  *         @arg @ref LL_HSEM_SEMAPHORE_7
+  *         @arg @ref LL_HSEM_SEMAPHORE_8
+  *         @arg @ref LL_HSEM_SEMAPHORE_9
+  *         @arg @ref LL_HSEM_SEMAPHORE_10
+  *         @arg @ref LL_HSEM_SEMAPHORE_11
+  *         @arg @ref LL_HSEM_SEMAPHORE_12
+  *         @arg @ref LL_HSEM_SEMAPHORE_13
+  *         @arg @ref LL_HSEM_SEMAPHORE_14
+  *         @arg @ref LL_HSEM_SEMAPHORE_15
+  *         @arg @ref LL_HSEM_SEMAPHORE_16
+  *         @arg @ref LL_HSEM_SEMAPHORE_17
+  *         @arg @ref LL_HSEM_SEMAPHORE_18
+  *         @arg @ref LL_HSEM_SEMAPHORE_19
+  *         @arg @ref LL_HSEM_SEMAPHORE_20
+  *         @arg @ref LL_HSEM_SEMAPHORE_21
+  *         @arg @ref LL_HSEM_SEMAPHORE_22
+  *         @arg @ref LL_HSEM_SEMAPHORE_23
+  *         @arg @ref LL_HSEM_SEMAPHORE_24
+  *         @arg @ref LL_HSEM_SEMAPHORE_25
+  *         @arg @ref LL_HSEM_SEMAPHORE_26
+  *         @arg @ref LL_HSEM_SEMAPHORE_27
+  *         @arg @ref LL_HSEM_SEMAPHORE_28
+  *         @arg @ref LL_HSEM_SEMAPHORE_29
+  *         @arg @ref LL_HSEM_SEMAPHORE_30
+  *         @arg @ref LL_HSEM_SEMAPHORE_31
+  *         @arg @ref LL_HSEM_SEMAPHORE_ALL
+  * @retval None
+  */
+__STATIC_INLINE void LL_HSEM_EnableIT_C1IER(HSEM_TypeDef *HSEMx, uint32_t SemaphoreMask)
+{
+  SET_BIT(HSEMx->C1IER, SemaphoreMask);
+}
+
+/**
+  * @brief  Disable interrupt.
+  * @rmtoll C1IER          ISEM          LL_HSEM_DisableIT_C1IER
+  * @param  HSEMx HSEM Instance.
+  * @param  SemaphoreMask This parameter can be a combination of the following values:
+  *         @arg @ref LL_HSEM_SEMAPHORE_0
+  *         @arg @ref LL_HSEM_SEMAPHORE_1
+  *         @arg @ref LL_HSEM_SEMAPHORE_2
+  *         @arg @ref LL_HSEM_SEMAPHORE_3
+  *         @arg @ref LL_HSEM_SEMAPHORE_4
+  *         @arg @ref LL_HSEM_SEMAPHORE_5
+  *         @arg @ref LL_HSEM_SEMAPHORE_6
+  *         @arg @ref LL_HSEM_SEMAPHORE_7
+  *         @arg @ref LL_HSEM_SEMAPHORE_8
+  *         @arg @ref LL_HSEM_SEMAPHORE_9
+  *         @arg @ref LL_HSEM_SEMAPHORE_10
+  *         @arg @ref LL_HSEM_SEMAPHORE_11
+  *         @arg @ref LL_HSEM_SEMAPHORE_12
+  *         @arg @ref LL_HSEM_SEMAPHORE_13
+  *         @arg @ref LL_HSEM_SEMAPHORE_14
+  *         @arg @ref LL_HSEM_SEMAPHORE_15
+  *         @arg @ref LL_HSEM_SEMAPHORE_16
+  *         @arg @ref LL_HSEM_SEMAPHORE_17
+  *         @arg @ref LL_HSEM_SEMAPHORE_18
+  *         @arg @ref LL_HSEM_SEMAPHORE_19
+  *         @arg @ref LL_HSEM_SEMAPHORE_20
+  *         @arg @ref LL_HSEM_SEMAPHORE_21
+  *         @arg @ref LL_HSEM_SEMAPHORE_22
+  *         @arg @ref LL_HSEM_SEMAPHORE_23
+  *         @arg @ref LL_HSEM_SEMAPHORE_24
+  *         @arg @ref LL_HSEM_SEMAPHORE_25
+  *         @arg @ref LL_HSEM_SEMAPHORE_26
+  *         @arg @ref LL_HSEM_SEMAPHORE_27
+  *         @arg @ref LL_HSEM_SEMAPHORE_28
+  *         @arg @ref LL_HSEM_SEMAPHORE_29
+  *         @arg @ref LL_HSEM_SEMAPHORE_30
+  *         @arg @ref LL_HSEM_SEMAPHORE_31
+  *         @arg @ref LL_HSEM_SEMAPHORE_ALL
+  * @retval None
+  */
+__STATIC_INLINE void LL_HSEM_DisableIT_C1IER(HSEM_TypeDef *HSEMx, uint32_t SemaphoreMask)
+{
+  CLEAR_BIT(HSEMx->C1IER, SemaphoreMask);
+}
+
+/**
+  * @brief  Check if interrupt is enabled.
+  * @rmtoll C1IER          ISEM          LL_HSEM_IsEnabledIT_C1IER
+  * @param  HSEMx HSEM Instance.
+  * @param  SemaphoreMask This parameter can be a combination of the following values:
+  *         @arg @ref LL_HSEM_SEMAPHORE_0
+  *         @arg @ref LL_HSEM_SEMAPHORE_1
+  *         @arg @ref LL_HSEM_SEMAPHORE_2
+  *         @arg @ref LL_HSEM_SEMAPHORE_3
+  *         @arg @ref LL_HSEM_SEMAPHORE_4
+  *         @arg @ref LL_HSEM_SEMAPHORE_5
+  *         @arg @ref LL_HSEM_SEMAPHORE_6
+  *         @arg @ref LL_HSEM_SEMAPHORE_7
+  *         @arg @ref LL_HSEM_SEMAPHORE_8
+  *         @arg @ref LL_HSEM_SEMAPHORE_9
+  *         @arg @ref LL_HSEM_SEMAPHORE_10
+  *         @arg @ref LL_HSEM_SEMAPHORE_11
+  *         @arg @ref LL_HSEM_SEMAPHORE_12
+  *         @arg @ref LL_HSEM_SEMAPHORE_13
+  *         @arg @ref LL_HSEM_SEMAPHORE_14
+  *         @arg @ref LL_HSEM_SEMAPHORE_15
+  *         @arg @ref LL_HSEM_SEMAPHORE_16
+  *         @arg @ref LL_HSEM_SEMAPHORE_17
+  *         @arg @ref LL_HSEM_SEMAPHORE_18
+  *         @arg @ref LL_HSEM_SEMAPHORE_19
+  *         @arg @ref LL_HSEM_SEMAPHORE_20
+  *         @arg @ref LL_HSEM_SEMAPHORE_21
+  *         @arg @ref LL_HSEM_SEMAPHORE_22
+  *         @arg @ref LL_HSEM_SEMAPHORE_23
+  *         @arg @ref LL_HSEM_SEMAPHORE_24
+  *         @arg @ref LL_HSEM_SEMAPHORE_25
+  *         @arg @ref LL_HSEM_SEMAPHORE_26
+  *         @arg @ref LL_HSEM_SEMAPHORE_27
+  *         @arg @ref LL_HSEM_SEMAPHORE_28
+  *         @arg @ref LL_HSEM_SEMAPHORE_29
+  *         @arg @ref LL_HSEM_SEMAPHORE_30
+  *         @arg @ref LL_HSEM_SEMAPHORE_31
+  *         @arg @ref LL_HSEM_SEMAPHORE_ALL
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_HSEM_IsEnabledIT_C1IER(HSEM_TypeDef *HSEMx, uint32_t SemaphoreMask)
+{
+  return ((READ_BIT(HSEMx->C1IER, SemaphoreMask) == (SemaphoreMask)) ? 1UL : 0UL);
+}
+
+
+/**
+  * @}
+  */
+
+/** @defgroup HSEM_LL_EF_FLAG_Management FLAG_Management
+  * @{
+  */
+
+/**
+  * @brief  Clear interrupt status.
+  * @rmtoll C1ICR         ISEM          LL_HSEM_ClearFlag_C1ICR
+  * @param  HSEMx HSEM Instance.
+  * @param  SemaphoreMask This parameter can be a combination of the following values:
+  *         @arg @ref LL_HSEM_SEMAPHORE_0
+  *         @arg @ref LL_HSEM_SEMAPHORE_1
+  *         @arg @ref LL_HSEM_SEMAPHORE_2
+  *         @arg @ref LL_HSEM_SEMAPHORE_3
+  *         @arg @ref LL_HSEM_SEMAPHORE_4
+  *         @arg @ref LL_HSEM_SEMAPHORE_5
+  *         @arg @ref LL_HSEM_SEMAPHORE_6
+  *         @arg @ref LL_HSEM_SEMAPHORE_7
+  *         @arg @ref LL_HSEM_SEMAPHORE_8
+  *         @arg @ref LL_HSEM_SEMAPHORE_9
+  *         @arg @ref LL_HSEM_SEMAPHORE_10
+  *         @arg @ref LL_HSEM_SEMAPHORE_11
+  *         @arg @ref LL_HSEM_SEMAPHORE_12
+  *         @arg @ref LL_HSEM_SEMAPHORE_13
+  *         @arg @ref LL_HSEM_SEMAPHORE_14
+  *         @arg @ref LL_HSEM_SEMAPHORE_15
+  *         @arg @ref LL_HSEM_SEMAPHORE_16
+  *         @arg @ref LL_HSEM_SEMAPHORE_17
+  *         @arg @ref LL_HSEM_SEMAPHORE_18
+  *         @arg @ref LL_HSEM_SEMAPHORE_19
+  *         @arg @ref LL_HSEM_SEMAPHORE_20
+  *         @arg @ref LL_HSEM_SEMAPHORE_21
+  *         @arg @ref LL_HSEM_SEMAPHORE_22
+  *         @arg @ref LL_HSEM_SEMAPHORE_23
+  *         @arg @ref LL_HSEM_SEMAPHORE_24
+  *         @arg @ref LL_HSEM_SEMAPHORE_25
+  *         @arg @ref LL_HSEM_SEMAPHORE_26
+  *         @arg @ref LL_HSEM_SEMAPHORE_27
+  *         @arg @ref LL_HSEM_SEMAPHORE_28
+  *         @arg @ref LL_HSEM_SEMAPHORE_29
+  *         @arg @ref LL_HSEM_SEMAPHORE_30
+  *         @arg @ref LL_HSEM_SEMAPHORE_31
+  *         @arg @ref LL_HSEM_SEMAPHORE_ALL
+  * @retval None
+  */
+__STATIC_INLINE void LL_HSEM_ClearFlag_C1ICR(HSEM_TypeDef *HSEMx, uint32_t SemaphoreMask)
+{
+  WRITE_REG(HSEMx->C1ICR, SemaphoreMask);
+}
+
+/**
+  * @brief  Get interrupt status from ISR register.
+  * @rmtoll C1ISR         ISEM          LL_HSEM_IsActiveFlag_C1ISR
+  * @param  HSEMx HSEM Instance.
+  * @param  SemaphoreMask This parameter can be a combination of the following values:
+  *         @arg @ref LL_HSEM_SEMAPHORE_0
+  *         @arg @ref LL_HSEM_SEMAPHORE_1
+  *         @arg @ref LL_HSEM_SEMAPHORE_2
+  *         @arg @ref LL_HSEM_SEMAPHORE_3
+  *         @arg @ref LL_HSEM_SEMAPHORE_4
+  *         @arg @ref LL_HSEM_SEMAPHORE_5
+  *         @arg @ref LL_HSEM_SEMAPHORE_6
+  *         @arg @ref LL_HSEM_SEMAPHORE_7
+  *         @arg @ref LL_HSEM_SEMAPHORE_8
+  *         @arg @ref LL_HSEM_SEMAPHORE_9
+  *         @arg @ref LL_HSEM_SEMAPHORE_10
+  *         @arg @ref LL_HSEM_SEMAPHORE_11
+  *         @arg @ref LL_HSEM_SEMAPHORE_12
+  *         @arg @ref LL_HSEM_SEMAPHORE_13
+  *         @arg @ref LL_HSEM_SEMAPHORE_14
+  *         @arg @ref LL_HSEM_SEMAPHORE_15
+  *         @arg @ref LL_HSEM_SEMAPHORE_16
+  *         @arg @ref LL_HSEM_SEMAPHORE_17
+  *         @arg @ref LL_HSEM_SEMAPHORE_18
+  *         @arg @ref LL_HSEM_SEMAPHORE_19
+  *         @arg @ref LL_HSEM_SEMAPHORE_20
+  *         @arg @ref LL_HSEM_SEMAPHORE_21
+  *         @arg @ref LL_HSEM_SEMAPHORE_22
+  *         @arg @ref LL_HSEM_SEMAPHORE_23
+  *         @arg @ref LL_HSEM_SEMAPHORE_24
+  *         @arg @ref LL_HSEM_SEMAPHORE_25
+  *         @arg @ref LL_HSEM_SEMAPHORE_26
+  *         @arg @ref LL_HSEM_SEMAPHORE_27
+  *         @arg @ref LL_HSEM_SEMAPHORE_28
+  *         @arg @ref LL_HSEM_SEMAPHORE_29
+  *         @arg @ref LL_HSEM_SEMAPHORE_30
+  *         @arg @ref LL_HSEM_SEMAPHORE_31
+  *         @arg @ref LL_HSEM_SEMAPHORE_ALL
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_HSEM_IsActiveFlag_C1ISR(HSEM_TypeDef *HSEMx, uint32_t SemaphoreMask)
+{
+  return ((READ_BIT(HSEMx->C1ISR, SemaphoreMask) == (SemaphoreMask)) ? 1UL : 0UL);
+}
+
+/**
+  * @brief  Get interrupt status from MISR register.
+  * @rmtoll C1MISR        ISEM          LL_HSEM_IsActiveFlag_C1MISR
+  * @param  HSEMx HSEM Instance.
+  * @param  SemaphoreMask This parameter can be a combination of the following values:
+  *         @arg @ref LL_HSEM_SEMAPHORE_0
+  *         @arg @ref LL_HSEM_SEMAPHORE_1
+  *         @arg @ref LL_HSEM_SEMAPHORE_2
+  *         @arg @ref LL_HSEM_SEMAPHORE_3
+  *         @arg @ref LL_HSEM_SEMAPHORE_4
+  *         @arg @ref LL_HSEM_SEMAPHORE_5
+  *         @arg @ref LL_HSEM_SEMAPHORE_6
+  *         @arg @ref LL_HSEM_SEMAPHORE_7
+  *         @arg @ref LL_HSEM_SEMAPHORE_8
+  *         @arg @ref LL_HSEM_SEMAPHORE_9
+  *         @arg @ref LL_HSEM_SEMAPHORE_10
+  *         @arg @ref LL_HSEM_SEMAPHORE_11
+  *         @arg @ref LL_HSEM_SEMAPHORE_12
+  *         @arg @ref LL_HSEM_SEMAPHORE_13
+  *         @arg @ref LL_HSEM_SEMAPHORE_14
+  *         @arg @ref LL_HSEM_SEMAPHORE_15
+  *         @arg @ref LL_HSEM_SEMAPHORE_16
+  *         @arg @ref LL_HSEM_SEMAPHORE_17
+  *         @arg @ref LL_HSEM_SEMAPHORE_18
+  *         @arg @ref LL_HSEM_SEMAPHORE_19
+  *         @arg @ref LL_HSEM_SEMAPHORE_20
+  *         @arg @ref LL_HSEM_SEMAPHORE_21
+  *         @arg @ref LL_HSEM_SEMAPHORE_22
+  *         @arg @ref LL_HSEM_SEMAPHORE_23
+  *         @arg @ref LL_HSEM_SEMAPHORE_24
+  *         @arg @ref LL_HSEM_SEMAPHORE_25
+  *         @arg @ref LL_HSEM_SEMAPHORE_26
+  *         @arg @ref LL_HSEM_SEMAPHORE_27
+  *         @arg @ref LL_HSEM_SEMAPHORE_28
+  *         @arg @ref LL_HSEM_SEMAPHORE_29
+  *         @arg @ref LL_HSEM_SEMAPHORE_30
+  *         @arg @ref LL_HSEM_SEMAPHORE_31
+  *         @arg @ref LL_HSEM_SEMAPHORE_ALL
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_HSEM_IsActiveFlag_C1MISR(HSEM_TypeDef *HSEMx, uint32_t SemaphoreMask)
+{
+  return ((READ_BIT(HSEMx->C1MISR, SemaphoreMask) == (SemaphoreMask)) ? 1UL : 0UL);
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* defined(HSEM) */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32MP1xx_LL_HSEM_H */

meta-st/meta-st-stm32mp-addons/mx/stm32mp157d-vrpmdv-mon-mx/Drivers/STM32MP1xx_HAL_Driver/Inc/stm32mp1xx_ll_ipcc.h

@@ -0,0 +1,732 @@
+/**
+  ******************************************************************************
+  * @file    stm32mp1xx_ll_ipcc.h
+  * @author  MCD Application Team
+  * @brief   Header file of IPCC LL module.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32MP1xx_LL_IPCC_H
+#define STM32MP1xx_LL_IPCC_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32mp1xx.h"
+
+/** @addtogroup STM32MP1xx_LL_Driver
+  * @{
+  */
+
+#if defined(IPCC)
+
+/** @defgroup IPCC_LL IPCC
+  * @{
+  */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup IPCC_LL_Exported_Constants IPCC Exported Constants
+  * @{
+  */
+
+/** @defgroup IPCC_LL_EC_GET_FLAG Get Flags Defines
+  * @brief    Flags defines which can be used with LL_IPCC_ReadReg function
+  * @{
+  */
+#define LL_IPCC_C1TOC2SR_CH1F IPCC_C1TOC2SR_CH1F_Msk /*!< C1 transmit to C2 receive Channel1 status flag before masking */
+#define LL_IPCC_C1TOC2SR_CH2F IPCC_C1TOC2SR_CH2F_Msk /*!< C1 transmit to C2 receive Channel2 status flag before masking */
+#define LL_IPCC_C1TOC2SR_CH3F IPCC_C1TOC2SR_CH3F_Msk /*!< C1 transmit to C2 receive Channel3 status flag before masking */
+#define LL_IPCC_C1TOC2SR_CH4F IPCC_C1TOC2SR_CH4F_Msk /*!< C1 transmit to C2 receive Channel4 status flag before masking */
+#define LL_IPCC_C1TOC2SR_CH5F IPCC_C1TOC2SR_CH5F_Msk /*!< C1 transmit to C2 receive Channel5 status flag before masking */
+#define LL_IPCC_C1TOC2SR_CH6F IPCC_C1TOC2SR_CH6F_Msk /*!< C1 transmit to C2 receive Channel6 status flag before masking */
+#define LL_IPCC_C2TOC1SR_CH1F IPCC_C2TOC1SR_CH1F_Msk /*!< C2 transmit to C1 receive Channel1 status flag before masking */
+#define LL_IPCC_C2TOC1SR_CH2F IPCC_C2TOC1SR_CH2F_Msk /*!< C2 transmit to C1 receive Channel2 status flag before masking */
+#define LL_IPCC_C2TOC1SR_CH3F IPCC_C2TOC1SR_CH3F_Msk /*!< C2 transmit to C1 receive Channel3 status flag before masking */
+#define LL_IPCC_C2TOC1SR_CH4F IPCC_C2TOC1SR_CH4F_Msk /*!< C2 transmit to C1 receive Channel4 status flag before masking */
+#define LL_IPCC_C2TOC1SR_CH5F IPCC_C2TOC1SR_CH5F_Msk /*!< C2 transmit to C1 receive Channel5 status flag before masking */
+#define LL_IPCC_C2TOC1SR_CH6F IPCC_C2TOC1SR_CH6F_Msk /*!< C2 transmit to C1 receive Channel6 status flag before masking */
+
+/**
+  * @}
+  */
+
+/** @defgroup IPCC_LL_EC_Channel Channel
+  * @{
+  */
+#define LL_IPCC_CHANNEL_1 (0x00000001U) /*!< IPCC Channel 1 */
+#define LL_IPCC_CHANNEL_2 (0x00000002U) /*!< IPCC Channel 2 */
+#define LL_IPCC_CHANNEL_3 (0x00000004U) /*!< IPCC Channel 3 */
+#define LL_IPCC_CHANNEL_4 (0x00000008U) /*!< IPCC Channel 4 */
+#define LL_IPCC_CHANNEL_5 (0x00000010U) /*!< IPCC Channel 5 */
+#define LL_IPCC_CHANNEL_6 (0x00000020U) /*!< IPCC Channel 6 */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup IPCC_LL_Exported_Macros IPCC Exported Macros
+  * @{
+  */
+
+/** @defgroup IPCC_LL_EM_WRITE_READ Common Write and read registers Macros
+  * @{
+  */
+
+/**
+  * @brief  Write a value in IPCC register
+  * @param  __INSTANCE__ IPCC Instance
+  * @param  __REG__ Register to be written
+  * @param  __VALUE__ Value to be written in the register
+  * @retval None
+  */
+#define LL_IPCC_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__))
+
+/**
+  * @brief  Read a value in IPCC register
+  * @param  __INSTANCE__ IPCC Instance
+  * @param  __REG__ Register to be read
+  * @retval Register value
+  */
+#define LL_IPCC_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__)
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup IPCC_LL_Exported_Functions IPCC Exported Functions
+  * @{
+  */
+
+/** @defgroup IPCC_LL_EF_IT_Management IT_Management
+  * @{
+  */
+
+/**
+  * @brief  Enable Transmit channel free interrupt for processor 1.
+  * @rmtoll C1CR          TXFIE         LL_C1_IPCC_EnableIT_TXF
+  * @param  IPCCx IPCC Instance.
+  * @retval None
+  */
+__STATIC_INLINE void LL_C1_IPCC_EnableIT_TXF(IPCC_TypeDef *IPCCx)
+{
+  SET_BIT(IPCCx->C1CR, IPCC_C1CR_TXFIE);
+}
+
+/**
+  * @brief  Disable Transmit channel free interrupt for processor 1.
+  * @rmtoll C1CR          TXFIE         LL_C1_IPCC_DisableIT_TXF
+  * @param  IPCCx IPCC Instance.
+  * @retval None
+  */
+__STATIC_INLINE void LL_C1_IPCC_DisableIT_TXF(IPCC_TypeDef *IPCCx)
+{
+  CLEAR_BIT(IPCCx->C1CR, IPCC_C1CR_TXFIE);
+}
+
+/**
+  * @brief  Check if Transmit channel free interrupt for processor 1 is enabled.
+  * @rmtoll C1CR          TXFIE         LL_C1_IPCC_IsEnabledIT_TXF
+  * @param  IPCCx IPCC Instance.
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_C1_IPCC_IsEnabledIT_TXF(IPCC_TypeDef const *const IPCCx)
+{
+  return ((READ_BIT(IPCCx->C1CR, IPCC_C1CR_TXFIE) == (IPCC_C1CR_TXFIE)) ? 1UL : 0UL);
+}
+
+/**
+  * @brief  Enable Receive channel occupied interrupt for processor 1.
+  * @rmtoll C1CR          RXOIE         LL_C1_IPCC_EnableIT_RXO
+  * @param  IPCCx IPCC Instance.
+  * @retval None
+  */
+__STATIC_INLINE void LL_C1_IPCC_EnableIT_RXO(IPCC_TypeDef *IPCCx)
+{
+  SET_BIT(IPCCx->C1CR, IPCC_C1CR_RXOIE);
+}
+
+/**
+  * @brief  Disable Receive channel occupied interrupt for processor 1.
+  * @rmtoll C1CR          RXOIE         LL_C1_IPCC_DisableIT_RXO
+  * @param  IPCCx IPCC Instance.
+  * @retval None
+  */
+__STATIC_INLINE void LL_C1_IPCC_DisableIT_RXO(IPCC_TypeDef *IPCCx)
+{
+  CLEAR_BIT(IPCCx->C1CR, IPCC_C1CR_RXOIE);
+}
+
+/**
+  * @brief  Check if Receive channel occupied interrupt for processor 1 is enabled.
+  * @rmtoll C1CR          RXOIE         LL_C1_IPCC_IsEnabledIT_RXO
+  * @param  IPCCx IPCC Instance.
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_C1_IPCC_IsEnabledIT_RXO(IPCC_TypeDef  const *const IPCCx)
+{
+  return ((READ_BIT(IPCCx->C1CR, IPCC_C1CR_RXOIE) == (IPCC_C1CR_RXOIE)) ? 1UL : 0UL);
+}
+
+/**
+  * @brief  Enable Transmit channel free interrupt for processor 2.
+  * @rmtoll C2CR          TXFIE         LL_C2_IPCC_EnableIT_TXF
+  * @param  IPCCx IPCC Instance.
+  * @retval None
+  */
+__STATIC_INLINE void LL_C2_IPCC_EnableIT_TXF(IPCC_TypeDef *IPCCx)
+{
+  SET_BIT(IPCCx->C2CR, IPCC_C2CR_TXFIE);
+}
+
+/**
+  * @brief  Disable Transmit channel free interrupt for processor 2.
+  * @rmtoll C2CR          TXFIE         LL_C2_IPCC_DisableIT_TXF
+  * @param  IPCCx IPCC Instance.
+  * @retval None
+  */
+__STATIC_INLINE void LL_C2_IPCC_DisableIT_TXF(IPCC_TypeDef *IPCCx)
+{
+  CLEAR_BIT(IPCCx->C2CR, IPCC_C2CR_TXFIE);
+}
+
+/**
+  * @brief  Check if Transmit channel free interrupt for processor 2 is enabled.
+  * @rmtoll C2CR          TXFIE         LL_C2_IPCC_IsEnabledIT_TXF
+  * @param  IPCCx IPCC Instance.
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_C2_IPCC_IsEnabledIT_TXF(IPCC_TypeDef  const *const IPCCx)
+{
+  return ((READ_BIT(IPCCx->C2CR, IPCC_C2CR_TXFIE) == (IPCC_C2CR_TXFIE)) ? 1UL : 0UL);
+}
+
+/**
+  * @brief  Enable Receive channel occupied interrupt for processor 2.
+  * @rmtoll C2CR          RXOIE         LL_C2_IPCC_EnableIT_RXO
+  * @param  IPCCx IPCC Instance.
+  * @retval None
+  */
+__STATIC_INLINE void LL_C2_IPCC_EnableIT_RXO(IPCC_TypeDef *IPCCx)
+{
+  SET_BIT(IPCCx->C2CR, IPCC_C2CR_RXOIE);
+}
+
+/**
+  * @brief  Disable Receive channel occupied interrupt for processor 2.
+  * @rmtoll C2CR          RXOIE         LL_C2_IPCC_DisableIT_RXO
+  * @param  IPCCx IPCC Instance.
+  * @retval None
+  */
+__STATIC_INLINE void LL_C2_IPCC_DisableIT_RXO(IPCC_TypeDef *IPCCx)
+{
+  CLEAR_BIT(IPCCx->C2CR, IPCC_C2CR_RXOIE);
+}
+
+/**
+  * @brief  Check if Receive channel occupied interrupt for processor 2 is enabled.
+  * @rmtoll C2CR          RXOIE         LL_C2_IPCC_IsEnabledIT_RXO
+  * @param  IPCCx IPCC Instance.
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_C2_IPCC_IsEnabledIT_RXO(IPCC_TypeDef const *const IPCCx)
+{
+  return ((READ_BIT(IPCCx->C2CR, IPCC_C2CR_RXOIE) == (IPCC_C2CR_RXOIE)) ? 1UL : 0UL);
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup IPCC_LL_EF_Configuration Configuration
+  * @{
+  */
+
+/**
+  * @brief  Unmask transmit channel free interrupt for processor 1.
+  * @rmtoll C1MR        CH1FM           LL_C1_IPCC_EnableTransmitChannel\n
+  *         C1MR        CH2FM           LL_C1_IPCC_EnableTransmitChannel\n
+  *         C1MR        CH3FM           LL_C1_IPCC_EnableTransmitChannel\n
+  *         C1MR        CH4FM           LL_C1_IPCC_EnableTransmitChannel\n
+  *         C1MR        CH5FM           LL_C1_IPCC_EnableTransmitChannel\n
+  *         C1MR        CH6FM           LL_C1_IPCC_EnableTransmitChannel
+  * @param  IPCCx IPCC Instance.
+  * @param  Channel This parameter can be a combination of the following values:
+  *         @arg @ref LL_IPCC_CHANNEL_1
+  *         @arg @ref LL_IPCC_CHANNEL_2
+  *         @arg @ref LL_IPCC_CHANNEL_3
+  *         @arg @ref LL_IPCC_CHANNEL_4
+  *         @arg @ref LL_IPCC_CHANNEL_5
+  *         @arg @ref LL_IPCC_CHANNEL_6
+  * @retval None
+  */
+__STATIC_INLINE void LL_C1_IPCC_EnableTransmitChannel(IPCC_TypeDef *IPCCx, uint32_t Channel)
+{
+  CLEAR_BIT(IPCCx->C1MR, Channel << IPCC_C1MR_CH1FM_Pos);
+}
+
+/**
+  * @brief  Mask transmit channel free interrupt for processor 1.
+  * @rmtoll C1MR        CH1FM           LL_C1_IPCC_DisableTransmitChannel\n
+  *         C1MR        CH2FM           LL_C1_IPCC_DisableTransmitChannel\n
+  *         C1MR        CH3FM           LL_C1_IPCC_DisableTransmitChannel\n
+  *         C1MR        CH4FM           LL_C1_IPCC_DisableTransmitChannel\n
+  *         C1MR        CH5FM           LL_C1_IPCC_DisableTransmitChannel\n
+  *         C1MR        CH6FM           LL_C1_IPCC_DisableTransmitChannel
+  * @param  IPCCx IPCC Instance.
+  * @param  Channel This parameter can be a combination of the following values:
+  *         @arg @ref LL_IPCC_CHANNEL_1
+  *         @arg @ref LL_IPCC_CHANNEL_2
+  *         @arg @ref LL_IPCC_CHANNEL_3
+  *         @arg @ref LL_IPCC_CHANNEL_4
+  *         @arg @ref LL_IPCC_CHANNEL_5
+  *         @arg @ref LL_IPCC_CHANNEL_6
+  * @retval None
+  */
+__STATIC_INLINE void LL_C1_IPCC_DisableTransmitChannel(IPCC_TypeDef *IPCCx, uint32_t Channel)
+{
+  SET_BIT(IPCCx->C1MR, Channel << IPCC_C1MR_CH1FM_Pos);
+}
+
+/**
+  * @brief  Check if Transmit channel free interrupt for processor 1 is masked.
+  * @rmtoll C1MR        CH1FM           LL_C1_IPCC_IsEnabledTransmitChannel\n
+  *         C1MR        CH2FM           LL_C1_IPCC_IsEnabledTransmitChannel\n
+  *         C1MR        CH3FM           LL_C1_IPCC_IsEnabledTransmitChannel\n
+  *         C1MR        CH4FM           LL_C1_IPCC_IsEnabledTransmitChannel\n
+  *         C1MR        CH5FM           LL_C1_IPCC_IsEnabledTransmitChannel\n
+  *         C1MR        CH6FM           LL_C1_IPCC_IsEnabledTransmitChannel
+  * @param  IPCCx IPCC Instance.
+  * @param  Channel This parameter can be one of the following values:
+  *         @arg @ref LL_IPCC_CHANNEL_1
+  *         @arg @ref LL_IPCC_CHANNEL_2
+  *         @arg @ref LL_IPCC_CHANNEL_3
+  *         @arg @ref LL_IPCC_CHANNEL_4
+  *         @arg @ref LL_IPCC_CHANNEL_5
+  *         @arg @ref LL_IPCC_CHANNEL_6
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_C1_IPCC_IsEnabledTransmitChannel(IPCC_TypeDef const *const IPCCx, uint32_t Channel)
+{
+  return ((READ_BIT(IPCCx->C1MR, Channel << IPCC_C1MR_CH1FM_Pos) != (Channel << IPCC_C1MR_CH1FM_Pos)) ? 1UL : 0UL);
+}
+
+/**
+  * @brief  Unmask receive channel occupied interrupt for processor 1.
+  * @rmtoll C1MR        CH1OM           LL_C1_IPCC_EnableReceiveChannel\n
+  *         C1MR        CH2OM           LL_C1_IPCC_EnableReceiveChannel\n
+  *         C1MR        CH3OM           LL_C1_IPCC_EnableReceiveChannel\n
+  *         C1MR        CH4OM           LL_C1_IPCC_EnableReceiveChannel\n
+  *         C1MR        CH5OM           LL_C1_IPCC_EnableReceiveChannel\n
+  *         C1MR        CH6OM           LL_C1_IPCC_EnableReceiveChannel
+  * @param  IPCCx IPCC Instance.
+  * @param  Channel This parameter can be a combination of the following values:
+  *         @arg @ref LL_IPCC_CHANNEL_1
+  *         @arg @ref LL_IPCC_CHANNEL_2
+  *         @arg @ref LL_IPCC_CHANNEL_3
+  *         @arg @ref LL_IPCC_CHANNEL_4
+  *         @arg @ref LL_IPCC_CHANNEL_5
+  *         @arg @ref LL_IPCC_CHANNEL_6
+  * @retval None
+  */
+__STATIC_INLINE void LL_C1_IPCC_EnableReceiveChannel(IPCC_TypeDef *IPCCx, uint32_t Channel)
+{
+  CLEAR_BIT(IPCCx->C1MR, Channel);
+}
+
+/**
+  * @brief  Mask receive channel occupied interrupt for processor 1.
+  * @rmtoll C1MR        CH1OM           LL_C1_IPCC_DisableReceiveChannel\n
+  *         C1MR        CH2OM           LL_C1_IPCC_DisableReceiveChannel\n
+  *         C1MR        CH3OM           LL_C1_IPCC_DisableReceiveChannel\n
+  *         C1MR        CH4OM           LL_C1_IPCC_DisableReceiveChannel\n
+  *         C1MR        CH5OM           LL_C1_IPCC_DisableReceiveChannel\n
+  *         C1MR        CH6OM           LL_C1_IPCC_DisableReceiveChannel
+  * @param  IPCCx IPCC Instance.
+  * @param  Channel This parameter can be a combination of the following values:
+  *         @arg @ref LL_IPCC_CHANNEL_1
+  *         @arg @ref LL_IPCC_CHANNEL_2
+  *         @arg @ref LL_IPCC_CHANNEL_3
+  *         @arg @ref LL_IPCC_CHANNEL_4
+  *         @arg @ref LL_IPCC_CHANNEL_5
+  *         @arg @ref LL_IPCC_CHANNEL_6
+  * @retval None
+  */
+__STATIC_INLINE void LL_C1_IPCC_DisableReceiveChannel(IPCC_TypeDef *IPCCx, uint32_t Channel)
+{
+  SET_BIT(IPCCx->C1MR, Channel);
+}
+
+/**
+  * @brief  Check if Receive channel occupied interrupt for processor 1 is masked.
+  * @rmtoll C1MR        CH1OM           LL_C1_IPCC_IsEnabledReceiveChannel\n
+  *         C1MR        CH2OM           LL_C1_IPCC_IsEnabledReceiveChannel\n
+  *         C1MR        CH3OM           LL_C1_IPCC_IsEnabledReceiveChannel\n
+  *         C1MR        CH4OM           LL_C1_IPCC_IsEnabledReceiveChannel\n
+  *         C1MR        CH5OM           LL_C1_IPCC_IsEnabledReceiveChannel\n
+  *         C1MR        CH6OM           LL_C1_IPCC_IsEnabledReceiveChannel
+  * @param  IPCCx IPCC Instance.
+  * @param  Channel This parameter can be one of the following values:
+  *         @arg @ref LL_IPCC_CHANNEL_1
+  *         @arg @ref LL_IPCC_CHANNEL_2
+  *         @arg @ref LL_IPCC_CHANNEL_3
+  *         @arg @ref LL_IPCC_CHANNEL_4
+  *         @arg @ref LL_IPCC_CHANNEL_5
+  *         @arg @ref LL_IPCC_CHANNEL_6
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_C1_IPCC_IsEnabledReceiveChannel(IPCC_TypeDef const *const IPCCx, uint32_t Channel)
+{
+  return ((READ_BIT(IPCCx->C1MR, Channel) != (Channel)) ? 1UL : 0UL);
+}
+
+/**
+  * @brief  Unmask transmit channel free interrupt for processor 2.
+  * @rmtoll C2MR        CH1FM           LL_C2_IPCC_EnableTransmitChannel\n
+  *         C2MR        CH2FM           LL_C2_IPCC_EnableTransmitChannel\n
+  *         C2MR        CH3FM           LL_C2_IPCC_EnableTransmitChannel\n
+  *         C2MR        CH4FM           LL_C2_IPCC_EnableTransmitChannel\n
+  *         C2MR        CH5FM           LL_C2_IPCC_EnableTransmitChannel\n
+  *         C2MR        CH6FM           LL_C2_IPCC_EnableTransmitChannel
+  * @param  IPCCx IPCC Instance.
+  * @param  Channel This parameter can be a combination of the following values:
+  *         @arg @ref LL_IPCC_CHANNEL_1
+  *         @arg @ref LL_IPCC_CHANNEL_2
+  *         @arg @ref LL_IPCC_CHANNEL_3
+  *         @arg @ref LL_IPCC_CHANNEL_4
+  *         @arg @ref LL_IPCC_CHANNEL_5
+  *         @arg @ref LL_IPCC_CHANNEL_6
+  * @retval None
+  */
+__STATIC_INLINE void LL_C2_IPCC_EnableTransmitChannel(IPCC_TypeDef *IPCCx, uint32_t Channel)
+{
+  CLEAR_BIT(IPCCx->C2MR, Channel << IPCC_C2MR_CH1FM_Pos);
+}
+
+/**
+  * @brief  Mask transmit channel free interrupt for processor 2.
+  * @rmtoll C2MR        CH1FM           LL_C2_IPCC_DisableTransmitChannel\n
+  *         C2MR        CH2FM           LL_C2_IPCC_DisableTransmitChannel\n
+  *         C2MR        CH3FM           LL_C2_IPCC_DisableTransmitChannel\n
+  *         C2MR        CH4FM           LL_C2_IPCC_DisableTransmitChannel\n
+  *         C2MR        CH5FM           LL_C2_IPCC_DisableTransmitChannel\n
+  *         C2MR        CH6FM           LL_C2_IPCC_DisableTransmitChannel
+  * @param  IPCCx IPCC Instance.
+  * @param  Channel This parameter can be a combination of the following values:
+  *         @arg @ref LL_IPCC_CHANNEL_1
+  *         @arg @ref LL_IPCC_CHANNEL_2
+  *         @arg @ref LL_IPCC_CHANNEL_3
+  *         @arg @ref LL_IPCC_CHANNEL_4
+  *         @arg @ref LL_IPCC_CHANNEL_5
+  *         @arg @ref LL_IPCC_CHANNEL_6
+  * @retval None
+  */
+__STATIC_INLINE void LL_C2_IPCC_DisableTransmitChannel(IPCC_TypeDef *IPCCx, uint32_t Channel)
+{
+  SET_BIT(IPCCx->C2MR, Channel << (IPCC_C2MR_CH1FM_Pos));
+}
+
+/**
+  * @brief  Check if Transmit channel free interrupt for processor 2 is masked.
+  * @rmtoll C2MR        CH1FM           LL_C2_IPCC_IsEnabledTransmitChannel\n
+  *         C2MR        CH2FM           LL_C2_IPCC_IsEnabledTransmitChannel\n
+  *         C2MR        CH3FM           LL_C2_IPCC_IsEnabledTransmitChannel\n
+  *         C2MR        CH4FM           LL_C2_IPCC_IsEnabledTransmitChannel\n
+  *         C2MR        CH5FM           LL_C2_IPCC_IsEnabledTransmitChannel\n
+  *         C2MR        CH6FM           LL_C2_IPCC_IsEnabledTransmitChannel
+  * @param  IPCCx IPCC Instance.
+  * @param  Channel This parameter can be one of the following values:
+  *         @arg @ref LL_IPCC_CHANNEL_1
+  *         @arg @ref LL_IPCC_CHANNEL_2
+  *         @arg @ref LL_IPCC_CHANNEL_3
+  *         @arg @ref LL_IPCC_CHANNEL_4
+  *         @arg @ref LL_IPCC_CHANNEL_5
+  *         @arg @ref LL_IPCC_CHANNEL_6
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_C2_IPCC_IsEnabledTransmitChannel(IPCC_TypeDef const *const IPCCx, uint32_t Channel)
+{
+  return ((READ_BIT(IPCCx->C2MR, Channel << IPCC_C2MR_CH1FM_Pos) != (Channel << IPCC_C2MR_CH1FM_Pos)) ? 1UL : 0UL);
+}
+
+/**
+  * @brief  Unmask receive channel occupied interrupt for processor 2.
+  * @rmtoll C2MR        CH1OM           LL_C2_IPCC_EnableReceiveChannel\n
+  *         C2MR        CH2OM           LL_C2_IPCC_EnableReceiveChannel\n
+  *         C2MR        CH3OM           LL_C2_IPCC_EnableReceiveChannel\n
+  *         C2MR        CH4OM           LL_C2_IPCC_EnableReceiveChannel\n
+  *         C2MR        CH5OM           LL_C2_IPCC_EnableReceiveChannel\n
+  *         C2MR        CH6OM           LL_C2_IPCC_EnableReceiveChannel
+  * @param  IPCCx IPCC Instance.
+  * @param  Channel This parameter can be a combination of the following values:
+  *         @arg @ref LL_IPCC_CHANNEL_1
+  *         @arg @ref LL_IPCC_CHANNEL_2
+  *         @arg @ref LL_IPCC_CHANNEL_3
+  *         @arg @ref LL_IPCC_CHANNEL_4
+  *         @arg @ref LL_IPCC_CHANNEL_5
+  *         @arg @ref LL_IPCC_CHANNEL_6
+  * @retval None
+  */
+__STATIC_INLINE void LL_C2_IPCC_EnableReceiveChannel(IPCC_TypeDef *IPCCx, uint32_t Channel)
+{
+  CLEAR_BIT(IPCCx->C2MR, Channel);
+}
+
+/**
+  * @brief  Mask receive channel occupied interrupt for processor 1.
+  * @rmtoll C2MR        CH1OM           LL_C2_IPCC_DisableReceiveChannel\n
+  *         C2MR        CH2OM           LL_C2_IPCC_DisableReceiveChannel\n
+  *         C2MR        CH3OM           LL_C2_IPCC_DisableReceiveChannel\n
+  *         C2MR        CH4OM           LL_C2_IPCC_DisableReceiveChannel\n
+  *         C2MR        CH5OM           LL_C2_IPCC_DisableReceiveChannel\n
+  *         C2MR        CH6OM           LL_C2_IPCC_DisableReceiveChannel
+  * @param  IPCCx IPCC Instance.
+  * @param  Channel This parameter can be a combination of the following values:
+  *         @arg @ref LL_IPCC_CHANNEL_1
+  *         @arg @ref LL_IPCC_CHANNEL_2
+  *         @arg @ref LL_IPCC_CHANNEL_3
+  *         @arg @ref LL_IPCC_CHANNEL_4
+  *         @arg @ref LL_IPCC_CHANNEL_5
+  *         @arg @ref LL_IPCC_CHANNEL_6
+  * @retval None
+  */
+__STATIC_INLINE void LL_C2_IPCC_DisableReceiveChannel(IPCC_TypeDef *IPCCx, uint32_t Channel)
+{
+  SET_BIT(IPCCx->C2MR, Channel);
+}
+
+/**
+  * @brief  Check if Receive channel occupied interrupt for processor 2 is masked.
+  * @rmtoll C2MR        CH1OM           LL_C2_IPCC_IsEnabledReceiveChannel\n
+  *         C2MR        CH2OM           LL_C2_IPCC_IsEnabledReceiveChannel\n
+  *         C2MR        CH3OM           LL_C2_IPCC_IsEnabledReceiveChannel\n
+  *         C2MR        CH4OM           LL_C2_IPCC_IsEnabledReceiveChannel\n
+  *         C2MR        CH5OM           LL_C2_IPCC_IsEnabledReceiveChannel\n
+  *         C2MR        CH6OM           LL_C2_IPCC_IsEnabledReceiveChannel
+  * @param  IPCCx IPCC Instance.
+  * @param  Channel This parameter can be one of the following values:
+  *         @arg @ref LL_IPCC_CHANNEL_1
+  *         @arg @ref LL_IPCC_CHANNEL_2
+  *         @arg @ref LL_IPCC_CHANNEL_3
+  *         @arg @ref LL_IPCC_CHANNEL_4
+  *         @arg @ref LL_IPCC_CHANNEL_5
+  *         @arg @ref LL_IPCC_CHANNEL_6
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_C2_IPCC_IsEnabledReceiveChannel(IPCC_TypeDef const *const IPCCx, uint32_t Channel)
+{
+  return ((READ_BIT(IPCCx->C2MR, Channel) != (Channel)) ? 1UL : 0UL);
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup IPCC_LL_EF_FLAG_Management FLAG_Management
+  * @{
+  */
+
+/**
+  * @brief  Clear IPCC receive channel status for processor 1.
+  * @note   Associated with IPCC_C2TOC1SR.CHxF
+  * @rmtoll C1SCR        CH1C           LL_C1_IPCC_ClearFlag_CHx\n
+  *         C1SCR        CH2C           LL_C1_IPCC_ClearFlag_CHx\n
+  *         C1SCR        CH3C           LL_C1_IPCC_ClearFlag_CHx\n
+  *         C1SCR        CH4C           LL_C1_IPCC_ClearFlag_CHx\n
+  *         C1SCR        CH5C           LL_C1_IPCC_ClearFlag_CHx\n
+  *         C1SCR        CH6C           LL_C1_IPCC_ClearFlag_CHx
+  * @param  IPCCx IPCC Instance.
+  * @param  Channel This parameter can be a combination of the following values:
+  *         @arg @ref LL_IPCC_CHANNEL_1
+  *         @arg @ref LL_IPCC_CHANNEL_2
+  *         @arg @ref LL_IPCC_CHANNEL_3
+  *         @arg @ref LL_IPCC_CHANNEL_4
+  *         @arg @ref LL_IPCC_CHANNEL_5
+  *         @arg @ref LL_IPCC_CHANNEL_6
+  * @retval None
+  */
+__STATIC_INLINE void LL_C1_IPCC_ClearFlag_CHx(IPCC_TypeDef *IPCCx, uint32_t Channel)
+{
+  WRITE_REG(IPCCx->C1SCR, Channel);
+}
+
+/**
+  * @brief  Set IPCC transmit channel status for processor 1.
+  * @note   Associated with IPCC_C1TOC2SR.CHxF
+  * @rmtoll C1SCR        CH1S           LL_C1_IPCC_SetFlag_CHx\n
+  *         C1SCR        CH2S           LL_C1_IPCC_SetFlag_CHx\n
+  *         C1SCR        CH3S           LL_C1_IPCC_SetFlag_CHx\n
+  *         C1SCR        CH4S           LL_C1_IPCC_SetFlag_CHx\n
+  *         C1SCR        CH5S           LL_C1_IPCC_SetFlag_CHx\n
+  *         C1SCR        CH6S           LL_C1_IPCC_SetFlag_CHx
+  * @param  IPCCx IPCC Instance.
+  * @param  Channel This parameter can be a combination of the following values:
+  *         @arg @ref LL_IPCC_CHANNEL_1
+  *         @arg @ref LL_IPCC_CHANNEL_2
+  *         @arg @ref LL_IPCC_CHANNEL_3
+  *         @arg @ref LL_IPCC_CHANNEL_4
+  *         @arg @ref LL_IPCC_CHANNEL_5
+  *         @arg @ref LL_IPCC_CHANNEL_6
+  * @retval None
+  */
+__STATIC_INLINE void LL_C1_IPCC_SetFlag_CHx(IPCC_TypeDef *IPCCx, uint32_t Channel)
+{
+  WRITE_REG(IPCCx->C1SCR, Channel << IPCC_C1SCR_CH1S_Pos);
+}
+
+/**
+  * @brief  Get channel status for processor 1.
+  * @rmtoll C1TOC2SR        CH1F           LL_C1_IPCC_IsActiveFlag_CHx\n
+  *         C1TOC2SR        CH2F           LL_C1_IPCC_IsActiveFlag_CHx\n
+  *         C1TOC2SR        CH3F           LL_C1_IPCC_IsActiveFlag_CHx\n
+  *         C1TOC2SR        CH4F           LL_C1_IPCC_IsActiveFlag_CHx\n
+  *         C1TOC2SR        CH5F           LL_C1_IPCC_IsActiveFlag_CHx\n
+  *         C1TOC2SR        CH6F           LL_C1_IPCC_IsActiveFlag_CHx
+  * @param  IPCCx IPCC Instance.
+  * @param  Channel This parameter can be one of the following values:
+  *         @arg @ref LL_IPCC_CHANNEL_1
+  *         @arg @ref LL_IPCC_CHANNEL_2
+  *         @arg @ref LL_IPCC_CHANNEL_3
+  *         @arg @ref LL_IPCC_CHANNEL_4
+  *         @arg @ref LL_IPCC_CHANNEL_5
+  *         @arg @ref LL_IPCC_CHANNEL_6
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_C1_IPCC_IsActiveFlag_CHx(IPCC_TypeDef  const *const IPCCx, uint32_t Channel)
+{
+  return ((READ_BIT(IPCCx->C1TOC2SR, Channel) == (Channel)) ? 1UL : 0UL);
+}
+
+/**
+  * @brief  Clear IPCC receive channel status for processor 2.
+  * @note   Associated with IPCC_C1TOC2SR.CHxF
+  * @rmtoll C2SCR        CH1C           LL_C2_IPCC_ClearFlag_CHx\n
+  *         C2SCR        CH2C           LL_C2_IPCC_ClearFlag_CHx\n
+  *         C2SCR        CH3C           LL_C2_IPCC_ClearFlag_CHx\n
+  *         C2SCR        CH4C           LL_C2_IPCC_ClearFlag_CHx\n
+  *         C2SCR        CH5C           LL_C2_IPCC_ClearFlag_CHx\n
+  *         C2SCR        CH6C           LL_C2_IPCC_ClearFlag_CHx
+  * @param  IPCCx IPCC Instance.
+  * @param  Channel This parameter can be a combination of the following values:
+  *         @arg @ref LL_IPCC_CHANNEL_1
+  *         @arg @ref LL_IPCC_CHANNEL_2
+  *         @arg @ref LL_IPCC_CHANNEL_3
+  *         @arg @ref LL_IPCC_CHANNEL_4
+  *         @arg @ref LL_IPCC_CHANNEL_5
+  *         @arg @ref LL_IPCC_CHANNEL_6
+  * @retval None
+  */
+__STATIC_INLINE void LL_C2_IPCC_ClearFlag_CHx(IPCC_TypeDef *IPCCx, uint32_t Channel)
+{
+  WRITE_REG(IPCCx->C2SCR, Channel);
+}
+
+/**
+  * @brief  Set IPCC transmit channel status for processor 2.
+  * @note   Associated with IPCC_C2TOC1SR.CHxF
+  * @rmtoll C2SCR        CH1S           LL_C2_IPCC_SetFlag_CHx\n
+  *         C2SCR        CH2S           LL_C2_IPCC_SetFlag_CHx\n
+  *         C2SCR        CH3S           LL_C2_IPCC_SetFlag_CHx\n
+  *         C2SCR        CH4S           LL_C2_IPCC_SetFlag_CHx\n
+  *         C2SCR        CH5S           LL_C2_IPCC_SetFlag_CHx\n
+  *         C2SCR        CH6S           LL_C2_IPCC_SetFlag_CHx
+  * @param  IPCCx IPCC Instance.
+  * @param  Channel This parameter can be a combination of the following values:
+  *         @arg @ref LL_IPCC_CHANNEL_1
+  *         @arg @ref LL_IPCC_CHANNEL_2
+  *         @arg @ref LL_IPCC_CHANNEL_3
+  *         @arg @ref LL_IPCC_CHANNEL_4
+  *         @arg @ref LL_IPCC_CHANNEL_5
+  *         @arg @ref LL_IPCC_CHANNEL_6
+  * @retval None
+  */
+__STATIC_INLINE void LL_C2_IPCC_SetFlag_CHx(IPCC_TypeDef *IPCCx, uint32_t Channel)
+{
+  WRITE_REG(IPCCx->C2SCR, Channel << IPCC_C2SCR_CH1S_Pos);
+}
+
+/**
+  * @brief  Get channel status for processor 2.
+  * @rmtoll C2TOC1SR        CH1F           LL_C2_IPCC_IsActiveFlag_CHx\n
+  *         C2TOC1SR        CH2F           LL_C2_IPCC_IsActiveFlag_CHx\n
+  *         C2TOC1SR        CH3F           LL_C2_IPCC_IsActiveFlag_CHx\n
+  *         C2TOC1SR        CH4F           LL_C2_IPCC_IsActiveFlag_CHx\n
+  *         C2TOC1SR        CH5F           LL_C2_IPCC_IsActiveFlag_CHx\n
+  *         C2TOC1SR        CH6F           LL_C2_IPCC_IsActiveFlag_CHx
+  * @param  IPCCx IPCC Instance.
+  * @param  Channel This parameter can be one of the following values:
+  *         @arg @ref LL_IPCC_CHANNEL_1
+  *         @arg @ref LL_IPCC_CHANNEL_2
+  *         @arg @ref LL_IPCC_CHANNEL_3
+  *         @arg @ref LL_IPCC_CHANNEL_4
+  *         @arg @ref LL_IPCC_CHANNEL_5
+  *         @arg @ref LL_IPCC_CHANNEL_6
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_C2_IPCC_IsActiveFlag_CHx(IPCC_TypeDef  const *const IPCCx, uint32_t Channel)
+{
+  return ((READ_BIT(IPCCx->C2TOC1SR, Channel) == (Channel)) ? 1UL : 0UL);
+}
+
+/**
+  * @brief  Get the number of supported channels.
+  * @rmtoll HWCFGR        CHANNELS         LL_IPCC_GetChannelNumber
+  * @param  IPCCx IPCC Instance.
+  * @retval Number of supported channels.
+  */
+__STATIC_INLINE uint32_t LL_IPCC_GetChannelNumber(IPCC_TypeDef *IPCCx)
+{
+  return READ_BIT(IPCCx->HWCFGR, IPCC_HWCFGR_CHANNELS) >> IPCC_HWCFGR_CHANNELS_Pos;
+}
+
+/**
+  * @}
+  */
+
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* defined(IPCC) */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32MP1xx_LL_IPCC_H */
+

meta-st/meta-st-stm32mp-addons/mx/stm32mp157d-vrpmdv-mon-mx/Drivers/STM32MP1xx_HAL_Driver/Inc/stm32mp1xx_ll_utils.h

@@ -0,0 +1,397 @@
+/**
+  ******************************************************************************
+  * @file    stm32mp1xx_ll_utils.h
+  * @author  MCD Application Team
+  * @brief   Header file of UTILS LL module.
+  @verbatim
+  ==============================================================================
+                     ##### How to use this driver #####
+  ==============================================================================
+    [..]
+    The LL UTILS driver contains a set of generic APIs that can be
+    used by user:
+      (+) Device electronic signature
+      (+) Timing functions
+      (+) PLL configuration functions
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32MP1xx_LL_UTILS_H
+#define STM32MP1xx_LL_UTILS_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32mp1xx.h"
+
+/** @addtogroup STM32MP1xx_LL_Driver
+  * @{
+  */
+
+/** @defgroup UTILS_LL UTILS
+  * @{
+  */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup UTILS_LL_Private_Constants UTILS Private Constants
+  * @{
+  */
+
+/* Max delay can be used in LL_mDelay */
+#define LL_MAX_DELAY                  0xFFFFFFFFU
+
+/**
+ * @brief Unique device ID register base address
+ */
+#define UID_BASE_ADDRESS              UID_BASE
+
+/**
+ * @brief Package data register base address
+ */
+#define PACKAGE_BASE_ADDRESS          PACKAGE_BASE
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup UTILS_LL_Private_Macros UTILS Private Macros
+  * @{
+  */
+/**
+  * @}
+  */
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup UTILS_LL_ES_INIT UTILS Exported structures
+  * @{
+  */
+/**
+  * @brief  UTILS PLL structure definition
+  */
+typedef struct
+{
+  uint32_t PLLM;   /*!< Division factor for PLL VCO input clock.
+                        This parameter can be a value  between 1 and 64 */
+
+  uint32_t PLLN;   /*!< Multiplication factor for PLL VCO output clock.
+                        This parameter must be a number between 4 and 512 */
+
+  uint32_t PLLP;   /*!< Division for the P divider
+                        This parameter can be a value between 1 and 128
+
+                        This feature can be modified afterwards using unitary
+                        functions @ref LL_RCC_PLL1_SetP, @ref LL_RCC_PLL2_SetP,
+                        @ref LL_RCC_PLL3_SetP and @ref LL_RCC_PLL4_SetP */
+
+  uint32_t PLLQ;   /*!< Division for the Q divider
+                        This parameter can be a value between 1 and 128
+
+                        This feature can be modified afterwards using unitary
+                        functions @ref LL_RCC_PLL2_SetQ, @ref LL_RCC_PLL3_SetQ
+                        and @ref LL_RCC_PLL4_SetQ*/
+
+  uint32_t PLLR;   /*!< Division for the R divider
+                        This parameter can be a value between 1 and 128
+
+                        This feature can be modified afterwards using unitary
+                        functions @ref LL_RCC_PLL2_SetR, @ref LL_RCC_PLL3_SetR
+                        and @ref LL_RCC_PLL4_SetR */
+
+  uint32_t PLLFRACV;  /*!< Fractional part of the multiplication factor for PLLx VCO.
+                        This parameter can be a value between 0 and 8191 (0x1FFF) */
+} LL_UTILS_PLLTypeDef;
+
+/**
+  * @brief  UTILS PLLs system structure definition
+  */
+typedef struct
+{
+  LL_UTILS_PLLTypeDef PLL1;   /*!< PLL1 structure parameters */
+
+  LL_UTILS_PLLTypeDef PLL2;   /*!< PLL2 structure parameters */
+
+  LL_UTILS_PLLTypeDef PLL3;   /*!< PLL3 structure parameters */
+
+  LL_UTILS_PLLTypeDef PLL4;   /*!< PLL4 structure parameters */
+
+} LL_UTILS_PLLsInitTypeDef;
+
+/**
+  * @brief  UTILS System, AHB and APB buses clock configuration structure definition
+  */
+typedef struct
+{
+  uint32_t MPUDivider;            /*!< The MPU divider. This clock is derived from the CK_PLL1_P clock.
+                                     This parameter can be a value of @ref RCC_LL_EC_MPU_DIV
+
+                                     This feature can be modified afterwards using unitary function
+                                     @ref LL_RCC_SetMPUPrescaler(). */
+
+  uint32_t AXIDivider;            /*!< The AXI divider. This clock is derived from the AXISSRC clock.
+                                     This parameter can be a value of @ref RCC_LL_EC_AXI_DIV
+
+                                     This feature can be modified afterwards using unitary function
+                                     @ref LL_RCC_SetACLKPrescaler(). */
+
+  uint32_t MCUDivider;            /*!< The MCU divider. This clock is derived from the MCUSSRC muxer.
+                                     This parameter can be a value of @ref RCC_LL_EC_MCU_DIV
+
+                                     This feature can be modified afterwards using unitary function
+                                     @ref LL_RCC_SetMLHCLKPrescaler(). */
+
+  uint32_t APB1CLKDivider;        /*!< The APB1 clock (PCLK1) divider. This clock is derived from the MCU divider.
+                                       This parameter can be a value of @ref RCC_LL_EC_APB1_DIV
+
+                                       This feature can be modified afterwards using unitary function
+                                       @ref LL_RCC_SetAPB1Prescaler(). */
+
+  uint32_t APB2CLKDivider;        /*!< The APB2 clock (PCLK2) divider. This clock is derived from the MCU divider.
+                                       This parameter can be a value of @ref RCC_LL_EC_APB2_DIV
+
+                                       This feature can be modified afterwards using unitary function
+                                       @ref LL_RCC_SetAPB2Prescaler(). */
+
+  uint32_t APB3CLKDivider;        /*!< The APB2 clock (PCLK3) divider. This clock is derived from the MCU divider.
+                                       This parameter can be a value of @ref RCC_LL_EC_APB3_DIV
+
+                                       This feature can be modified afterwards using unitary function
+                                       @ref LL_RCC_SetAPB3Prescaler(). */
+
+  uint32_t APB4CLKDivider;        /*!< The APB4 clock (PCLK4) divider. This clock is derived from the AXIDIV divider.
+                                       This parameter can be a value of @ref RCC_LL_EC_APB4_DIV
+
+                                       This feature can be modified afterwards using unitary function
+                                       @ref LL_RCC_SetAPB4Prescaler(). */
+
+  uint32_t APB5CLKDivider;        /*!< The APB5 clock (PCLK5) divider. This clock is derived from the AXIDIV divider.
+                                       This parameter can be a value of @ref RCC_LL_EC_APB5_DIV
+
+                                       This feature can be modified afterwards using unitary function
+                                       @ref LL_RCC_SetAPB5Prescaler(). */
+} LL_UTILS_ClkInitTypeDef;
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup UTILS_LL_Exported_Constants UTILS Exported Constants
+  * @{
+  */
+
+/** @defgroup UTILS_EC_HSE_BYPASS HSE Bypass activation
+  * @{
+  */
+#define LL_UTILS_HSEBYPASS_OFF    0x00000000U         /*!< HSE Bypass is disabled */
+#define LL_UTILS_HSEBYPASS_ON     RCC_OCENSETR_HSEBYP /*!< HSE Bypass is enabled */
+#define LL_UTILS_HSEBYPASSDIG_ON  RCC_OCENSETR_DIGBYP /*!< HSE Bypass Digital is enabled */
+
+/**
+  * @}
+  */
+
+/** @defgroup UTILS_EC_PACKAGETYPE PACKAGE TYPE
+  * @{
+  */
+#define LL_UTILS_PACKAGETYPE_TFBGA257         1U      /*!< TFBGA257 package type */
+#define LL_UTILS_PACKAGETYPE_TFBGA361         2U      /*!< TFBGA361 package type */
+#define LL_UTILS_PACKAGETYPE_LFBGA354         3U      /*!< LFBGA354 package type */
+#define LL_UTILS_PACKAGETYPE_LFBGA448         4U      /*!< LFBGA448 package type */
+
+/**
+  * @}
+  */
+
+/** @defgroup UTILS_EC_RPN DEVICE PART NUMBER
+  * @{
+  */
+#define LL_UTILS_RPN_STM32MP157Cxx            0U      /*!< STM32MP157Cxx Part Number */
+#define LL_UTILS_RPN_STM32MP157Axx            1U      /*!< STM32MP157Axx Part Number */
+#define LL_UTILS_RPN_STM32MP157Fxx          128U      /*!< STM32MP157Fxx Part Number */
+#define LL_UTILS_RPN_STM32MP157Dxx          129U      /*!< STM32MP157Dxx Part Number */
+
+/**
+  * @}
+  */
+
+/** @defgroup UTILS_EC_DV DEVICE ID VERSION
+  * @{
+  */
+#define LL_UTILS_DV_ID_STM32MP15xxx           0x500U  /*!< STM32MP15xxx Device ID */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup UTILS_LL_Exported_Functions UTILS Exported Functions
+  * @{
+  */
+
+/** @defgroup UTILS_EF_DEVICE_ELECTRONIC_SIGNATURE DEVICE ELECTRONIC SIGNATURE
+  * @{
+  */
+
+/**
+  * @brief  Get Word0 of the unique device identifier (UID based on 96 bits)
+  * @retval UID[31:0]
+  */
+__STATIC_INLINE uint32_t LL_GetUID_Word0(void)
+{
+  return (uint32_t)(READ_REG(*((uint32_t *)UID_BASE_ADDRESS)));
+}
+
+/**
+  * @brief  Get Word1 of the unique device identifier (UID based on 96 bits)
+  * @retval UID[63:32]
+  */
+__STATIC_INLINE uint32_t LL_GetUID_Word1(void)
+{
+  return (uint32_t)(READ_REG(*((uint32_t *)(UID_BASE_ADDRESS + 4U))));
+}
+
+/**
+  * @brief  Get Word2 of the unique device identifier (UID based on 96 bits)
+  * @retval UID[95:64]
+  */
+__STATIC_INLINE uint32_t LL_GetUID_Word2(void)
+{
+  return (uint32_t)(READ_REG(*((uint32_t *)(UID_BASE_ADDRESS + 8U))));
+}
+
+/**
+  * @brief  Get Package type
+  * @retval Returned value can be one of the following values:
+  *         @arg @ref LL_UTILS_PACKAGETYPE_TFBGA257
+  *         @arg @ref LL_UTILS_PACKAGETYPE_TFBGA361
+  *         @arg @ref LL_UTILS_PACKAGETYPE_LFBGA354
+  *         @arg @ref LL_UTILS_PACKAGETYPE_LFBGA448
+  */
+__STATIC_INLINE uint32_t LL_GetPackageType(void)
+{
+  return (uint32_t)(READ_BIT(*(uint32_t *)PACKAGE_BASE_ADDRESS, PKG_ID) >> PKG_ID_Pos);
+}
+
+/**
+  * @brief  Get Device Part Number
+  * @retval Returned value can be one of the following values:
+  *         @arg @ref LL_UTILS_RPN_STM32MP157Cxx
+  *         @arg @ref LL_UTILS_RPN_STM32MP157Axx
+  *         @arg @ref LL_UTILS_RPN_STM32MP157Fxx
+  *         @arg @ref LL_UTILS_RPN_STM32MP157Dxx
+  */
+__STATIC_INLINE uint32_t LL_GetDevicePartNumber(void)
+{
+  return (uint32_t)(READ_BIT(*(uint32_t *)RPN_BASE, RPN_ID) >> RPN_ID_Pos);
+}
+
+/**
+  * @brief  Get Device Version ID
+  * @retval Returned value can be one of the following values:
+  *         @arg @ref LL_UTILS_DV_ID_STM32MP15xxx
+  */
+__STATIC_INLINE uint32_t LL_GetDeviceVersionDevID(void)
+{
+  return (uint32_t)(READ_BIT(*(uint32_t *)DV_BASE, DV_DEV_ID) >> DV_DEV_ID_Pos);
+}
+
+/**
+  * @brief  Get Device Version Rev ID
+  * @retval Returned value is Silicon version
+  */
+__STATIC_INLINE uint32_t LL_GetDeviceVersionRevID(void)
+{
+  return (uint32_t)(READ_BIT(*(uint32_t *)DV_BASE, DV_REV_ID) >> DV_REV_ID_Pos);
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup UTILS_LL_EF_DELAY DELAY
+  * @{
+  */
+#if defined(CORE_CM4)
+/**
+  * @brief  This function configures the Cortex-M SysTick source of the time base.
+  * @param  CPU_Frequency Core frequency in Hz. It can be calculated thanks to RCC
+  *         helper macro or function @ref LL_RCC_GetSystemClocksFreq
+  *         - Use  MCU_Frequency structure element returned by function above
+  * @note   When a RTOS is used, it is recommended to avoid changing the SysTick
+  *         configuration by calling this function, for a delay use rather osDelay RTOS service.
+  * @param  Ticks Number of ticks
+  * @retval None
+  */
+__STATIC_INLINE void LL_InitTick(uint32_t CPU_Frequency, uint32_t Ticks)
+{
+  /* Configure the SysTick to have interrupt in 1ms time base */
+  SysTick->LOAD  = (uint32_t)((CPU_Frequency / Ticks) - 1UL);  /* set reload register */
+  SysTick->VAL   = 0UL;                                       /* Load the SysTick Counter Value */
+  SysTick->CTRL  = SysTick_CTRL_CLKSOURCE_Msk |
+                   SysTick_CTRL_ENABLE_Msk;                   /* Enable the Systick Timer */
+}
+
+void        LL_Init1msTick(uint32_t CPU_Frequency);
+void        LL_mDelay(uint32_t Delay);
+#endif /* CORE_CM4 */
+
+/**
+  * @}
+  */
+
+/** @defgroup UTILS_EF_SYSTEM SYSTEM
+  * @{
+  */
+
+void        LL_SetSystemCoreClock(uint32_t CPU_Frequency);
+ErrorStatus LL_PLL_ConfigSystemClock_HSE(uint32_t HSEFrequency,
+                                         uint32_t HSEBypass,
+                                         LL_UTILS_PLLsInitTypeDef *UTILS_PLLInitStruct,
+                                         LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct);
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32MP1xx_LL_UTILS_H */
+

meta-st/meta-st-stm32mp-addons/mx/stm32mp157d-vrpmdv-mon-mx/Drivers/STM32MP1xx_HAL_Driver/LICENSE.txt

@@ -0,0 +1,6 @@
+This software component is provided to you as part of a software package and
+applicable license terms are in the  Package_license file. If you received this
+software component outside of a package or without applicable license terms,
+the terms of the BSD-3-Clause license shall apply. 
+You may obtain a copy of the BSD-3-Clause at:
+https://opensource.org/licenses/BSD-3-Clause

meta-st/meta-st-stm32mp-addons/mx/stm32mp157d-vrpmdv-mon-mx/Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal.c

@@ -0,0 +1,967 @@
+/**
+  ******************************************************************************
+  * @file    stm32mp1xx_hal.c
+  * @author  MCD Application Team
+  * @brief   HAL module driver.
+  *          This is the common part of the HAL initialization
+  *
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  @verbatim
+  ==============================================================================
+                     ##### How to use this driver #####
+  ==============================================================================
+    [..]
+    The common HAL driver contains a set of generic and common APIs that can be
+    used by the PPP peripheral drivers and the user to start using the HAL.
+    [..]
+    The HAL contains two APIs' categories:
+         (+) Common HAL APIs
+         (+) Services HAL APIs
+
+  @endverbatim
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32mp1xx_hal.h"
+
+/** @addtogroup STM32MP1xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup HAL  HAL
+  * @brief HAL module driver.
+  * @{
+  */
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @defgroup HAL_Private_Defines HAL Private Defines
+  * @{
+  */
+  
+/**
+ * @brief STM32MP1xx HAL Driver version number
+   */
+#define __STM32MP1xx_HAL_VERSION_MAIN   (0x01U) /*!< [31:24] main version */
+#define __STM32MP1xx_HAL_VERSION_SUB1   (0x06U) /*!< [23:16] sub1 version */
+#define __STM32MP1xx_HAL_VERSION_SUB2   (0x00U) /*!< [15:8]  sub2 version */
+#define __STM32MP1xx_HAL_VERSION_RC     (0x00U) /*!< [7:0]  release candidate */
+#define __STM32MP1xx_HAL_VERSION         ((__STM32MP1xx_HAL_VERSION_MAIN << 24)\
+                                        |(__STM32MP1xx_HAL_VERSION_SUB1 << 16)\
+                                        |(__STM32MP1xx_HAL_VERSION_SUB2 << 8 )\
+                                        |(__STM32MP1xx_HAL_VERSION_RC))
+
+#define IDCODE_DEVID_MASK    ((uint32_t)0x00000FFF)
+#define VREFBUF_TIMEOUT_VALUE     (uint32_t)10   /* 10 ms  */
+/**
+  * @}
+  */
+
+/** @defgroup HAL_Private_Constants HAL Private Constants
+  * @{
+  */
+#define SYSCFG_DEFAULT_TIMEOUT 100U
+/**
+  * @}
+  */
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Exported variables --------------------------------------------------------*/
+
+/** @defgroup HAL_Exported_Variables HAL Exported Variables
+  * @{
+  */
+__IO uint32_t uwTick;
+#if defined(CORE_CM4)
+uint32_t uwTickPrio   = (1UL << __NVIC_PRIO_BITS); /* Invalid PRIO */
+#else /* CA7 */
+uint32_t uwTickPrio   = (1UL << 4); /* Invalid PRIO */
+#endif
+HAL_TickFreqTypeDef uwTickFreq = HAL_TICK_FREQ_DEFAULT;  /* 1KHz */
+/**
+  * @}
+  */
+
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup HAL_Private_Functions  HAL Private Functions
+  * @{
+  */
+
+/** @defgroup HAL_Group1 Initialization and de-initialization Functions
+ *  @brief    Initialization and de-initialization functions
+ *
+@verbatim
+ ===============================================================================
+              ##### Initialization and de-initialization functions #####
+ ===============================================================================
+    [..]  This section provides functions allowing to:
+      (+) Initializes the Flash interface the NVIC allocation and initial clock
+          configuration. It initializes the systick also when timeout is needed
+          and the backup domain when enabled.
+      (+) De-Initializes common part of the HAL.
+      (+) Configure The time base source to have 1ms time base with a dedicated
+          Tick interrupt priority.
+        (++) SysTick timer is used by default as source of time base, but user
+             can eventually implement his proper time base source (a general purpose
+             timer for example or other time source), keeping in mind that Time base
+             duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and
+             handled in milliseconds basis.
+        (++) Time base configuration function (HAL_InitTick ()) is called automatically
+             at the beginning of the program after reset by HAL_Init() or at any time
+             when clock is configured, by HAL_RCC_ClockConfig().
+        (++) Source of time base is configured  to generate interrupts at regular
+             time intervals. Care must be taken if HAL_Delay() is called from a
+             peripheral ISR process, the Tick interrupt line must have higher priority
+            (numerically lower) than the peripheral interrupt. Otherwise the caller
+            ISR process will be blocked.
+       (++) functions affecting time base configurations are declared as __weak
+             to make  override possible  in case of other  implementations in user file.
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  This function is used to initialize the HAL Library; it must be the first
+  *         instruction to be executed in the main program (before to call any other
+  *         HAL function), it performs the following:
+  *           Configures the SysTick to generate an interrupt each 1 millisecond,
+  *           which is clocked by the HSI (at this stage, the clock is not yet
+  *           configured and thus the system is running from the internal HSI at 64 MHz).
+  *           Set NVIC Group Priority to 4.
+  *           Calls the HAL_MspInit() callback function defined in user file
+  *           "stm32mp1xx_hal_msp.c" to do the global low level hardware initialization
+  *
+  * @note   SysTick is used as time base for the HAL_Delay() function, the application
+  *         need to ensure that the SysTick time base is always set to 1 millisecond
+  *         to have correct HAL operation.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_Init(void)
+{
+  /* Set Interrupt Group Priority */
+#if defined (CORE_CM4)
+  HAL_NVIC_SetPriorityGrouping(NVIC_PRIORITYGROUP_4);
+#endif
+
+  /* Update the SystemCoreClock global variable */
+  SystemCoreClock = HAL_RCC_GetSystemCoreClockFreq();
+
+  /* Use systick as time base source and configure 1ms tick (default clock after Reset is HSI) */
+  if(HAL_InitTick(TICK_INT_PRIORITY) != HAL_OK)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Init the low level hardware */
+  HAL_MspInit();
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  This function de-Initializes common part of the HAL and stops the systick.
+  *         This function is optional.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DeInit(void)
+{
+  /* Reset of all peripherals */
+
+
+  /* De-Init the low level hardware */
+  HAL_MspDeInit();
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the MSP.
+  * @retval None
+  */
+__weak void HAL_MspInit(void)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_MspInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  DeInitializes the MSP.
+  * @retval None
+  */
+__weak void HAL_MspDeInit(void)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_MspDeInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief This function configures the source of the time base.
+  *        The time source is configured  to have 1ms time base with a dedicated
+  *        Tick interrupt priority.
+  * @note This function is called  automatically at the beginning of program after
+  *       reset by HAL_Init() or at any time when clock is reconfigured  by HAL_RCC_ClockConfig().
+  * @note In the default implementation, SysTick timer is the source of time base.
+  *       It is used to generate interrupts at regular time intervals.
+  *       Care must be taken if HAL_Delay() is called from a peripheral ISR process,
+  *       The the SysTick interrupt must have higher priority (numerically lower)
+  *       than the peripheral interrupt. Otherwise the caller ISR process will be blocked.
+  *       The function is declared as __weak  to be overwritten  in case of other
+  *       implementation  in user file.
+  * @param TickPriority: Tick interrupt priority.
+  * @retval HAL status
+  */
+__weak HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority)
+{
+  /*Configure the Tick to have interrupt in 1ms time basis*/
+#if defined (CORE_CA7)
+
+#if defined(USE_ST_CASIS)
+  HAL_SYSTICK_Config(SystemCoreClock/1000);
+#elif defined (USE_PL1_SecurePhysicalTimer_IRQ)
+  /* Stop Timer */
+  PL1_SetControl(0x0);
+
+  PL1_SetCounterFrequency(HSI_VALUE);
+
+  /* Initialize Counter */
+  PL1_SetLoadValue(HSI_VALUE/1000);
+
+  /* Disable corresponding IRQ */
+  IRQ_Disable(SecurePhysicalTimer_IRQn);
+  IRQ_ClearPending(SecurePhysicalTimer_IRQn);
+
+  /* Set timer priority to lowest (Only bit 7:3 are implemented in MP1 CA7 GIC) */
+  /* TickPriority is based on 16 level priority (from MCUs) so set it in 7:4 and leave bit 3=0 */
+  if (TickPriority < (1UL << 4))
+  {
+    IRQ_SetPriority(SecurePhysicalTimer_IRQn, TickPriority << 4);
+    uwTickPrio = TickPriority;
+  }
+  else
+  {
+    return HAL_ERROR;
+  }
+
+  /* Set edge-triggered IRQ */
+  IRQ_SetMode(SecurePhysicalTimer_IRQn, IRQ_MODE_TRIG_EDGE);
+
+  /* Enable corresponding interrupt */
+  IRQ_Enable(SecurePhysicalTimer_IRQn);
+
+  /* Kick start Timer */
+  PL1_SetControl(0x1);
+#else
+  /*Set Counter Frequency */
+  PL1_SetCounterFrequency(HSI_VALUE);
+ // __set_CNTFRQ(HSI_VALUE);
+  /* Initialize Counter */
+  PL1_SetLoadValue(0x1);
+ // __set_CNTP_TVAL(0x1);
+#endif
+
+#endif /* CORE_CA7 */
+
+
+#if defined (CORE_CM4)
+  if ((uint32_t)uwTickFreq == 0U)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Configure the SysTick to have interrupt in 1ms time basis*/
+  if (HAL_SYSTICK_Config(SystemCoreClock /(1000U / uwTickFreq)) > 0U)
+  {
+    return HAL_ERROR;
+  }
+  /* Configure the SysTick IRQ priority */
+  if (TickPriority < (1UL << __NVIC_PRIO_BITS))
+  {
+    HAL_NVIC_SetPriority(SysTick_IRQn, TickPriority, 0U);
+    uwTickPrio = TickPriority;
+  }
+  else
+  {
+    return HAL_ERROR;
+  }
+#endif /* CORE_CM4 */
+
+
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_Group2 HAL Control functions
+ *  @brief    HAL Control functions
+ *
+@verbatim
+ ===============================================================================
+                      ##### HAL Control functions #####
+ ===============================================================================
+    [..]  This section provides functions allowing to:
+      (+) Provide a tick value in millisecond
+      (+) Provide a blocking delay in millisecond
+      (+) Suspend the time base source interrupt
+      (+) Resume the time base source interrupt
+      (+) Get the HAL API driver version
+      (+) Get the device identifier
+      (+) Get the device revision identifier
+      (+) Enable/Disable Debug module during SLEEP mode
+      (+) Enable/Disable Debug module during STOP mode
+      (+) Enable/Disable Debug module during STANDBY mode
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief This function is called to increment  a global variable "uwTick"
+  *        used as application time base.
+  * @note In the default implementation, this variable is incremented each 1ms
+  *       in Systick ISR.
+ * @note This function is declared as __weak to be overwritten in case of other
+  *      implementations in user file.
+  * @retval None
+  */
+__weak void HAL_IncTick(void)
+{
+  uwTick += (uint32_t)uwTickFreq;
+}
+
+/**
+  * @brief Provides a tick value in millisecond.
+  * @note This function is declared as __weak to be overwritten in case of other
+  *       implementations in user file.
+  * @retval tick value
+  */
+__weak uint32_t HAL_GetTick(void)
+{
+#if defined (CORE_CA7)
+
+#if defined (USE_ST_CASIS)
+  return ( Gen_Timer_Get_PhysicalCount() / (HSI_VALUE/1000));
+#elif defined (USE_PL1_SecurePhysicalTimer_IRQ)
+  /* tick is incremented in SecurePhysicalTimer_IRQ handler */
+  return uwTick;
+#else
+  /* tick value directly got from 64bits CA7 register*/
+  return ( PL1_GetCurrentPhysicalValue() / (HSI_VALUE/1000));
+#endif
+
+#endif /* CORE_CA7 */
+
+
+#if defined (CORE_CM4)
+  /* tick is incremented in systick handler */
+  return uwTick;
+#endif /* CORE_CM4 */
+
+}
+
+#if defined (CORE_CM4)
+/**
+  * @brief This function returns a tick priority.
+  * @retval tick priority
+  */
+uint32_t HAL_GetTickPrio(void)
+{
+  return uwTickPrio;
+}
+
+/**
+  * @brief Set new tick Freq.
+  * @retval Status
+  */
+HAL_StatusTypeDef HAL_SetTickFreq(HAL_TickFreqTypeDef Freq)
+{
+  HAL_StatusTypeDef status  = HAL_OK;
+  HAL_TickFreqTypeDef prevTickFreq;
+  assert_param(IS_TICKFREQ(Freq));
+
+  if (uwTickFreq != Freq)
+  {
+    /* Back up uwTickFreq frequency */
+    prevTickFreq = uwTickFreq;
+
+    /* Update uwTickFreq global variable used by HAL_InitTick() */
+    uwTickFreq = Freq;
+
+    /* Apply the new tick Freq  */
+    status = HAL_InitTick(uwTickPrio);
+
+    if (status != HAL_OK)
+    {
+      /* Restore previous tick frequency */
+      uwTickFreq = prevTickFreq;
+    }
+  }
+
+  return status;
+}
+
+/**
+  * @brief Return tick frequency.
+  * @retval tick period in Hz
+  */
+HAL_TickFreqTypeDef HAL_GetTickFreq(void)
+{
+  return uwTickFreq;
+}
+#endif
+
+/**
+  * @brief This function provides accurate delay (in milliseconds) based
+  *        on variable incremented.
+  * @note In the default implementation , SysTick timer is the source of time base.
+  *       It is used to generate interrupts at regular time intervals where uwTick
+  *       is incremented.
+  * @note ThiS function is declared as __weak to be overwritten in case of other
+  *       implementations in user file.
+  * @param Delay: specifies the delay time length, in milliseconds.
+  * @retval None
+  */
+__weak void HAL_Delay(uint32_t Delay)
+{
+  uint32_t tickstart = HAL_GetTick();
+  uint32_t wait = Delay;
+
+  /* Add a freq to guarantee minimum wait */
+  if (wait < HAL_MAX_DELAY)
+  {
+    wait += (uint32_t)(uwTickFreq);
+  }
+
+  while ((HAL_GetTick() - tickstart) < wait)
+  {
+  }
+}
+
+/**
+  * @brief Suspend Tick increment.
+  * @note In the default implementation , SysTick timer is the source of time base. It is
+  *       used to generate interrupts at regular time intervals. Once HAL_SuspendTick()
+  *       is called, the the SysTick interrupt will be disabled and so Tick increment
+  *       is suspended.
+  * @note This function is declared as __weak to be overwritten in case of other
+  *       implementations in user file.
+  * @retval None
+  */
+__weak void HAL_SuspendTick(void)
+{
+#if defined (CORE_CA7)
+#elif defined (CORE_CM4)
+  /* Disable SysTick Interrupt */
+  SysTick->CTRL &= ~SysTick_CTRL_TICKINT_Msk;
+#endif
+}
+
+/**
+  * @brief Resume Tick increment.
+  * @note In the default implementation , SysTick timer is the source of time base. It is
+  *       used to generate interrupts at regular time intervals. Once HAL_ResumeTick()
+  *       is called, the the SysTick interrupt will be enabled and so Tick increment
+  *       is resumed.
+  * @note This function is declared as __weak to be overwritten in case of other
+  *       implementations in user file.
+  * @retval None
+  */
+__weak void HAL_ResumeTick(void)
+{
+#if defined (CORE_CA7)
+#elif defined (CORE_CM4)
+  /* Enable SysTick Interrupt */
+  SysTick->CTRL  |= SysTick_CTRL_TICKINT_Msk;
+#endif
+}
+
+/**
+  * @brief  Returns the HAL revision
+  * @retval version : 0xXYZR (8bits for each decimal, R for RC)
+  */
+uint32_t HAL_GetHalVersion(void)
+{
+ return __STM32MP1xx_HAL_VERSION;
+}
+
+/**
+  * @brief  Returns the device revision identifier.
+  * @retval Device revision identifier
+  */
+uint32_t HAL_GetREVID(void)
+{
+   return((DBGMCU->IDCODE) >> 16);
+}
+
+/**
+  * @brief  Returns the device identifier.
+  * @retval Device identifier
+  */
+uint32_t HAL_GetDEVID(void)
+{
+   return((DBGMCU->IDCODE) & IDCODE_DEVID_MASK);
+}
+
+/**
+  * @brief  Return the first word of the unique device identifier (UID based on 96 bits)
+  * @retval Device identifier
+  */
+uint32_t HAL_GetUIDw0(void)
+{
+  return(READ_REG(*((uint32_t *)UID_BASE)));
+}
+
+/**
+  * @brief  Return the second word of the unique device identifier (UID based on 96 bits)
+  * @retval Device identifier
+  */
+uint32_t HAL_GetUIDw1(void)
+{
+  return(READ_REG(*((uint32_t *)(UID_BASE + 4U))));
+}
+
+/**
+  * @brief  Return the third word of the unique device identifier (UID based on 96 bits)
+  * @retval Device identifier
+  */
+uint32_t HAL_GetUIDw2(void)
+{
+  return(READ_REG(*((uint32_t *)(UID_BASE + 8U))));
+}
+
+/**
+  * @brief  Enable DBG wake up on AIEC
+  * @retval None
+  */
+void HAL_EnableDBGWakeUp(void)
+{
+#if defined (CORE_CA7)
+  SET_BIT(EXTI_C1->IMR3, EXTI_IMR3_IM75);
+#elif defined (CORE_CM4)
+  SET_BIT(EXTI_C2->IMR3, EXTI_IMR3_IM75);
+#endif
+}
+
+/**
+  * @brief  Disable DBG wake up on AIEC
+  * @retval None
+  */
+void HAL_DisableDBGWakeUp(void)
+{
+#if defined (CORE_CA7)
+  CLEAR_BIT(EXTI_C1->IMR3, EXTI_IMR3_IM75);
+#elif defined (CORE_CM4)
+  CLEAR_BIT(EXTI_C2->IMR3, EXTI_IMR3_IM75);
+#endif
+}
+
+/**
+  * @brief  Enable the Debug Module during Domain1 SLEEP mode
+  * @retval None
+  */
+void HAL_EnableDBGSleepMode(void)
+{
+  SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP);
+}
+
+/**
+  * @brief  Disable the Debug Module during Domain1 SLEEP mode
+  * @retval None
+  */
+void HAL_DisableDBGSleepMode(void)
+{
+  CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP);
+}
+
+/**
+  * @brief  Enable the Debug Module during Domain1 STOP mode
+  * @retval None
+  */
+void HAL_EnableDBGStopMode(void)
+{
+  SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP);
+}
+
+/**
+  * @brief  Disable the Debug Module during Domain1 STOP mode
+  * @retval None
+  */
+void HAL_DisableDBGStopMode(void)
+{
+  CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP);
+}
+
+/**
+  * @brief  Enable the Debug Module during Domain1 STANDBY mode
+  * @retval None
+  */
+void HAL_EnableDBGStandbyMode(void)
+{
+  SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY);
+}
+
+/**
+  * @brief  Disable the Debug Module during Domain1 STANDBY mode
+  * @retval None
+  */
+void HAL_DisableDBGStandbyMode(void)
+{
+  CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY);
+}
+
+
+/**
+  * @brief Configure the internal voltage reference buffer voltage scale.
+  * @param VoltageScaling  specifies the output voltage to achieve
+  *          This parameter can be one of the following values:
+  *            @arg SYSCFG_VREFBUF_VOLTAGE_SCALE0: VREF_OUT1 around 2.048 V.
+  *                                                This requires VDDA equal to or higher than 2.4 V.
+  *            @arg SYSCFG_VREFBUF_VOLTAGE_SCALE1: VREF_OUT2 around 2.5 V.
+  *                                                This requires VDDA equal to or higher than 2.8 V.
+  *            @arg SYSCFG_VREFBUF_VOLTAGE_SCALE2: VREF_OUT3 around 1.5 V.
+  *                                                This requires VDDA equal to or higher than 1.8 V.
+  *            @arg SYSCFG_VREFBUF_VOLTAGE_SCALE3: VREF_OUT4 around 1.8 V.
+  *                                                This requires VDDA equal to or higher than 2.1 V.
+  * @retval None
+  */
+void HAL_SYSCFG_VREFBUF_VoltageScalingConfig(uint32_t VoltageScaling)
+{
+  /* Check the parameters */
+  assert_param(IS_SYSCFG_VREFBUF_VOLTAGE_SCALE(VoltageScaling));
+
+  MODIFY_REG(VREFBUF->CSR, VREFBUF_CSR_VRS, VoltageScaling);
+}
+
+/**
+  * @brief Configure the internal voltage reference buffer high impedance mode.
+  * @param Mode  specifies the high impedance mode
+  *          This parameter can be one of the following values:
+  *            @arg SYSCFG_VREFBUF_HIGH_IMPEDANCE_DISABLE: VREF+ pin is internally connect to VREFINT output.
+  *            @arg SYSCFG_VREFBUF_HIGH_IMPEDANCE_ENABLE: VREF+ pin is high impedance.
+  * @retval None
+  */
+void HAL_SYSCFG_VREFBUF_HighImpedanceConfig(uint32_t Mode)
+{
+  /* Check the parameters */
+  assert_param(IS_SYSCFG_VREFBUF_HIGH_IMPEDANCE(Mode));
+
+  MODIFY_REG(VREFBUF->CSR, VREFBUF_CSR_HIZ, Mode);
+}
+
+/**
+  * @brief  Tune the Internal Voltage Reference buffer (VREFBUF).
+  * @retval None
+  */
+void HAL_SYSCFG_VREFBUF_TrimmingConfig(uint32_t TrimmingValue)
+{
+  /* Check the parameters */
+  assert_param(IS_SYSCFG_VREFBUF_TRIMMING(TrimmingValue));
+
+  MODIFY_REG(VREFBUF->CCR, VREFBUF_CCR_TRIM, TrimmingValue);
+}
+
+/**
+  * @brief  Enable the Internal Voltage Reference buffer (VREFBUF).
+  * @retval HAL_OK/HAL_TIMEOUT
+  */
+HAL_StatusTypeDef HAL_SYSCFG_EnableVREFBUF(void)
+{
+  uint32_t  tickstart = 0;
+
+  SET_BIT(VREFBUF->CSR, VREFBUF_CSR_ENVR);
+
+  /* Get Start Tick*/
+  tickstart = HAL_GetTick();
+
+  /* Wait for VRR bit  */
+  while(READ_BIT(VREFBUF->CSR, VREFBUF_CSR_VRR) == RESET)
+  {
+    if((HAL_GetTick() - tickstart) > VREFBUF_TIMEOUT_VALUE)
+    {
+      return HAL_TIMEOUT;
+    }
+  }
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Disable the Internal Voltage Reference buffer (VREFBUF).
+  *
+  * @retval None
+  */
+void HAL_SYSCFG_DisableVREFBUF(void)
+{
+  CLEAR_BIT(VREFBUF->CSR, VREFBUF_CSR_ENVR);
+}
+
+/**
+  * @brief  Ethernet PHY Interface Selection either MII or RMII
+  * @param  SYSCFG_ETHInterface: Selects the Ethernet PHY interface
+  *   This parameter can be one of the following values:
+  *   @arg SYSCFG_ETH_MII  : Select the Media Independent Interface
+  *   @arg SYSCFG_ETH_GMII : Select the Gigabit Media Independent Interface
+  *   @arg SYSCFG_ETH_RGMII: Select the Gigabit Reduced Media Independent Interface
+  *   @arg SYSCFG_ETH_RMII : Select the Reduced Media Independent Interface
+  * @retval None
+  */
+void HAL_SYSCFG_ETHInterfaceSelect(uint32_t SYSCFG_ETHInterface)
+{
+  /* Check the parameter */
+  assert_param(IS_SYSCFG_ETHERNET_CONFIG(SYSCFG_ETHInterface));
+  SYSCFG->PMCCLRR = SYSCFG_PMCSETR_ETH_SEL|SYSCFG_PMCSETR_ETH_SELMII_SEL;
+  SYSCFG->PMCSETR = (uint32_t)(SYSCFG_ETHInterface);
+}
+
+/**
+  * @brief  Analog Switch control for dual analog pads.
+  * @param  SYSCFG_AnalogSwitch: Selects the analog pad
+  *   This parameter can be one or a combination of the following values:
+  *   @arg SYSCFG_SWITCH_PA0 : Select PA0 analog switch
+  *   @arg SYSCFG_SWITCH_PA1:  Select PA1 analog switch
+  * @param  SYSCFG_SwitchState: Open or Close the analog switch between dual pads (
+  *   This parameter can be one or a combination of the following values:
+  *   @arg SYSCFG_SWITCH_PA0_OPEN
+  *   @arg SYSCFG_SWITCH_PA0_CLOSE
+  *   @arg SYSCFG_SWITCH_PA1_OPEN
+  *   @arg SYSCFG_SWITCH_PA1_CLOSE
+  * @retval None
+  */
+
+void HAL_SYSCFG_AnalogSwitchConfig(uint32_t SYSCFG_AnalogSwitch , uint32_t SYSCFG_SwitchState )
+{
+  /* Check the parameter */
+  assert_param(IS_SYSCFG_ANALOG_SWITCH(SYSCFG_AnalogSwitch));
+  assert_param(IS_SYSCFG_SWITCH_STATE(SYSCFG_SwitchState));
+  SYSCFG->PMCCLRR = SYSCFG_AnalogSwitch;
+  SYSCFG->PMCSETR = (uint32_t)(SYSCFG_SwitchState);
+
+}
+
+
+/**
+  * @brief  Enables the booster to reduce the total harmonic distortion of the analog
+  *         switch when the supply voltage is lower than 2.7 V.
+  * @note   Activating the booster allows to guaranty the analog switch AC performance
+  *         when the supply voltage is below 2.7 V: in this case, the analog switch
+  *         performance is the same on the full voltage range
+  * @retval None
+  */
+void HAL_SYSCFG_EnableBOOST(void)
+{
+  SYSCFG->PMCSETR = SYSCFG_PMCSETR_EN_BOOSTER;
+
+}
+
+/**
+  * @brief  Disables the booster
+  * @note   Activating the booster allows to guaranty the analog switch AC performance
+  *         when the supply voltage is below 2.7 V: in this case, the analog switch
+  *         performance is the same on the full voltage range
+  * @retval None
+  */
+void HAL_SYSCFG_DisableBOOST(void)
+{
+  SYSCFG->PMCCLRR = SYSCFG_PMCCLRR_EN_BOOSTER;
+}
+
+
+/**
+  * @brief  Enables the I/O Compensation Cell.
+  * @note   The I/O compensation cell can be used only when the device supply
+  *         voltage ranges from 2.4 to 3.6 V.
+  * @retval None
+  */
+void HAL_EnableCompensationCell(void)
+{
+#if defined(CORE_CM4)
+  SYSCFG->CMPENSETR = SYSCFG_CMPENSETR_MCU_EN;
+#elif defined(CORE_CA7)
+  SYSCFG->CMPENSETR = SYSCFG_CMPENSETR_MPU_EN;
+#endif
+}
+
+/**
+  * @brief  Power-down the I/O Compensation Cell.
+  * @note   The I/O compensation cell can be used only when the device supply
+  *         voltage ranges from 2.4 to 3.6 V.
+  * @retval None
+  */
+void HAL_DisableCompensationCell(void)
+{
+#if defined(CORE_CM4)
+  SYSCFG->CMPENCLRR = SYSCFG_CMPENCLRR_MCU_EN;
+#elif defined(CORE_CA7)
+  SYSCFG->CMPENCLRR = SYSCFG_CMPENCLRR_MPU_EN;
+#endif
+}
+
+
+/**
+  * @brief  To Enable optimize the I/O speed when the product voltage is low.
+  * @note   This bit is active only if PRODUCT_BELOW_25V user option bit is set. It must be
+  *         used only if the product supply voltage is below 2.5 V. Setting this bit when VDD is
+  *         higher than 2.5 V might be destructive.
+  * @param  SYSCFG_HighSpeedSignal: Signal selection (TRACE, QUADSPI...)
+  *   This parameter can be one or a combination of the following values:
+  *   @arg SYSCFG_HIGHSPEED_TRACE_SIGNAL
+  *   @arg SYSCFG_HIGHSPEED_QUADSPI_SIGNAL
+  *   @arg SYSCFG_HIGHSPEED_ETH_SIGNAL
+  *   @arg SYSCFG_HIGHSPEED_SDMMC_SIGNAL
+  *   @arg SYSCFG_HIGHSPEED_SPI_SIGNAL
+  * @retval None
+  */
+void HAL_SYSCFG_EnableIOSpeedOptimize(uint32_t SYSCFG_HighSpeedSignal )
+{
+  SYSCFG->IOCTRLSETR = SYSCFG_HighSpeedSignal;
+}
+
+/**
+  * @brief  To Disable optimize the I/O speed when the product voltage is low.
+  * @note   This bit is active only if PRODUCT_BELOW_25V user option bit is set. It must be
+  *         used only if the product supply voltage is below 2.5 V. Setting this bit when VDD is
+  *         higher than 2.5 V might be destructive.
+  * @param  SYSCFG_HighSpeedSignal: Signal selection (TRACE, QUADSPI...)
+  *   This parameter can be one or a combination of the following values:
+  *   @arg SYSCFG_HIGHSPEED_TRACE_SIGNAL
+  *   @arg SYSCFG_HIGHSPEED_QUADSPI_SIGNAL
+  *   @arg SYSCFG_HIGHSPEED_ETH_SIGNAL
+  *   @arg SYSCFG_HIGHSPEED_SDMMC_SIGNAL
+  *   @arg SYSCFG_HIGHSPEED_SPI_SIGNAL
+  * @retval None
+  */
+void HAL_SYSCFG_DisableIOSpeedOptimize(uint32_t SYSCFG_HighSpeedSignal )
+{
+  SYSCFG->IOCTRLCLRR = SYSCFG_HighSpeedSignal;
+}
+
+/**
+  * @brief  Code selection for the I/O Compensation cell
+  * @param  SYSCFG_CompCode: Selects the code to be applied for the I/O compensation cell
+  *   This parameter can be one of the following values:
+  *   @arg SYSCFG_CELL_CODE : Select Code from the cell (available in the SYSCFG_CCVR)
+  *   @arg SYSCFG_REGISTER_CODE: Select Code from the SYSCFG compensation cell code register (SYSCFG_CCCR)
+  * @retval None
+  */
+void HAL_SYSCFG_CompensationCodeSelect(uint32_t SYSCFG_CompCode)
+{
+  /* Check the parameter */
+  assert_param(IS_SYSCFG_CODE_SELECT(SYSCFG_CompCode));
+  MODIFY_REG(SYSCFG->CMPCR, SYSCFG_CMPCR_SW_CTRL, (uint32_t)(SYSCFG_CompCode));
+}
+
+/**
+  * @brief  Code selection for the I/O Compensation cell
+  * @param  SYSCFG_PMOSCode: PMOS compensation code
+  *         This code is applied to the I/O compensation cell when the CS bit of the
+  *          SYSCFG_CMPCR is set
+  * @param  SYSCFG_NMOSCode: NMOS compensation code
+  *         This code is applied to the I/O compensation cell when the CS bit of the
+  *          SYSCFG_CMPCR is set
+  * @retval None
+  */
+void HAL_SYSCFG_CompensationCodeConfig(uint32_t SYSCFG_PMOSCode, uint32_t SYSCFG_NMOSCode )
+{
+  /* Check the parameter */
+  assert_param(IS_SYSCFG_CODE_CONFIG(SYSCFG_PMOSCode));
+  assert_param(IS_SYSCFG_CODE_CONFIG(SYSCFG_NMOSCode));
+  MODIFY_REG(SYSCFG->CMPCR, SYSCFG_CMPCR_RANSRC|SYSCFG_CMPCR_RAPSRC, (((uint32_t)(SYSCFG_PMOSCode)<< 4)|(uint32_t)(SYSCFG_NMOSCode)) );
+}
+
+/**
+  * @brief  Disable IO compensation mechanism
+  *         E.g. before going into STOP
+  * @retval None
+  */
+void HAL_SYSCFG_DisableIOCompensation(void)
+{
+  uint32_t pmos_val = 0;
+  uint32_t nmos_val = 0;
+
+  /* Get I/O compensation cell values for PMOS and NMOS transistors */
+  pmos_val = (__HAL_SYSCFG_GET_PMOS_CMP() >> 28);
+  nmos_val = (__HAL_SYSCFG_GET_NMOS_CMP() >> 24);
+
+  /* Copy actual value of SYSCFG_CMPCR.APSRC[3:0]/ANSRC[3:0] in
+   * SYSCFG_CMPCR.RAPSRC[3:0]/RANSRC[3:0]
+   */
+  HAL_SYSCFG_CompensationCodeConfig(pmos_val, nmos_val);
+
+  /* Set SYSCFG_CMPCR.SW_CTRL = 1 */
+  HAL_SYSCFG_CompensationCodeSelect(SYSCFG_REGISTER_CODE);
+
+  /* Disable the Compensation Cell */
+  HAL_DisableCompensationCell();
+}
+
+/**
+  * @brief  Enable IO compensation mechanism
+  *         By default the I/O compensation cell is not used. However when the
+  *         I/O output buffer speed is configured in 50 MHz mode and above, it
+  *         is recommended to use the compensation cell for a slew rate control
+  *         on I/O tf(IO)out/tr(IO)out commutation to reduce the I/O noise on
+  *         the power supply.
+  * @note   Use polling mode for timeout as code could be used on critical
+  *         section (IRQs disabled)
+  * @retval HAL_StatusTypeDef value
+  */
+HAL_StatusTypeDef HAL_SYSCFG_EnableIOCompensation(void)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+  __IO uint32_t count = SYSCFG_DEFAULT_TIMEOUT * (SystemCoreClock / 20U / 1000U);
+
+  /* Set SYSCFG_CMPENSETR.MCU_EN */
+  HAL_EnableCompensationCell();
+
+  /* Wait SYSCFG_CMPCR.READY = 1 */
+  do
+  {
+    if (count-- == 0U)
+    {
+      return  HAL_TIMEOUT;
+    }
+  }
+  while (__HAL_SYSCFG_CMP_CELL_GET_FLAG() == 0U);
+
+  /* Set SYSCFG_CMPCR.SW_CTRL = 0 */
+  HAL_SYSCFG_CompensationCodeSelect(SYSCFG_CELL_CODE);
+
+  return status;
+}
+  
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */

meta-st/meta-st-stm32mp-addons/mx/stm32mp157d-vrpmdv-mon-mx/Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_cortex.c

@@ -0,0 +1,438 @@
+/**
+  ******************************************************************************
+  * @file    stm32mp1xx_hal_cortex.c
+  * @author  MCD Application Team
+  * @brief   CORTEX HAL module driver.
+  *          This file provides firmware functions to manage the following
+  *          functionalities of the CORTEX:
+  *           + Initialization and de-initialization functions
+  *           + Peripheral Control functions
+  *
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  @verbatim
+  ==============================================================================
+                        ##### How to use this driver #####
+  ==============================================================================
+
+    [..]
+    *** How to configure Interrupts using CORTEX HAL driver ***
+    ===========================================================
+    [..]
+    This section provides functions allowing to configure the NVIC interrupts (IRQ).
+    The Cortex-M exceptions are managed by CMSIS functions.
+
+    (#) Configure the NVIC Priority Grouping using HAL_NVIC_SetPriorityGrouping()
+        function according to the following table.
+    (#) Configure the priority of the selected IRQ Channels using HAL_NVIC_SetPriority().
+    (#) Enable the selected IRQ Channels using HAL_NVIC_EnableIRQ().
+    (#) please refer to programming manual for details in how to configure priority.
+
+     -@- When the NVIC_PRIORITYGROUP_0 is selected, IRQ preemption is no more possible.
+         The pending IRQ priority will be managed only by the sub priority.
+
+     -@- IRQ priority order (sorted by highest to lowest priority):
+        (+@) Lowest preemption priority
+        (+@) Lowest sub priority
+        (+@) Lowest hardware priority (IRQ number)
+
+    [..]
+    *** How to configure Systick using CORTEX HAL driver ***
+    ========================================================
+    [..]
+    Setup SysTick Timer for time base.
+
+   (+) The HAL_SYSTICK_Config() function calls the SysTick_Config() function which
+       is a CMSIS function that:
+        (++) Configures the SysTick Reload register with value passed as function parameter.
+        (++) Configures the SysTick IRQ priority to the lowest value (0x0F).
+        (++) Resets the SysTick Counter register.
+        (++) Configures the SysTick Counter clock source to be Core Clock Source (HCLK).
+        (++) Enables the SysTick Interrupt.
+        (++) Starts the SysTick Counter.
+
+   (+) You can change the SysTick IRQ priority by calling the
+       HAL_NVIC_SetPriority(SysTick_IRQn,...) function just after the HAL_SYSTICK_Config() function
+       call. The HAL_NVIC_SetPriority() call the NVIC_SetPriority() function which is a CMSIS function.
+
+   (+) To adjust the SysTick time base, use the following formula:
+
+       Reload Value = SysTick Counter Clock (Hz) x  Desired Time base (s)
+       (++) Reload Value is the parameter to be passed for HAL_SYSTICK_Config() function
+       (++) Reload Value should not exceed 0xFFFFFF
+
+  @endverbatim
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32mp1xx_hal.h"
+
+/** @addtogroup STM32MP1xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup CORTEX CORTEX
+  * @brief CORTEX HAL module driver
+  * @{
+  */
+
+#ifdef HAL_CORTEX_MODULE_ENABLED
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup CORTEX_Exported_Functions CORTEX Exported Functions
+  * @{
+  */
+
+
+/** @defgroup CORTEX_Exported_Functions_Group1 Initialization and de-initialization functions
+ *  @brief    Initialization and Configuration functions
+ *
+@verbatim
+  ==============================================================================
+              ##### Initialization and de-initialization functions #####
+  ==============================================================================
+    [..]
+      This section provides the CORTEX HAL driver functions allowing to configure Interrupts
+      Systick functionalities
+
+@endverbatim
+  * @{
+  */
+
+
+/**
+  * @brief  Sets the priority grouping field (preemption priority and subpriority)
+  *         using the required unlock sequence.
+  * @param  PriorityGroup: The priority grouping bits length.
+  *         This parameter can be one of the following values:
+  *         @arg NVIC_PRIORITYGROUP_0: 0 bits for preemption priority
+  *                                    4 bits for subpriority
+  *         @arg NVIC_PRIORITYGROUP_1: 1 bits for preemption priority
+  *                                    3 bits for subpriority
+  *         @arg NVIC_PRIORITYGROUP_2: 2 bits for preemption priority
+  *                                    2 bits for subpriority
+  *         @arg NVIC_PRIORITYGROUP_3: 3 bits for preemption priority
+  *                                    1 bits for subpriority
+  *         @arg NVIC_PRIORITYGROUP_4: 4 bits for preemption priority
+  *                                    0 bits for subpriority
+  * @note   When the NVIC_PriorityGroup_0 is selected, IRQ preemption is no more possible.
+  *         The pending IRQ priority will be managed only by the subpriority.
+  * @retval None
+  */
+void HAL_NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+{
+  /* Check the parameters */
+  assert_param(IS_NVIC_PRIORITY_GROUP(PriorityGroup));
+
+  /* Set the PRIGROUP[10:8] bits according to the PriorityGroup parameter value */
+  NVIC_SetPriorityGrouping(PriorityGroup);
+}
+
+/**
+  * @brief  Sets the priority of an interrupt.
+  * @param  IRQn: External interrupt number.
+  *         This parameter can be an enumerator of IRQn_Type enumeration
+  *         (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32mp1xxxx.h))
+  * @param  PreemptPriority: The preemption priority for the IRQn channel.
+  *         This parameter can be a value between 0 and 15
+  *         A lower priority value indicates a higher priority
+  * @param  SubPriority: the subpriority level for the IRQ channel.
+  *         This parameter can be a value between 0 and 15
+  *         A lower priority value indicates a higher priority.
+  * @retval None
+  */
+void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+  uint32_t prioritygroup = 0x00;
+
+  /* Check the parameters */
+  assert_param(IS_NVIC_SUB_PRIORITY(SubPriority));
+  assert_param(IS_NVIC_PREEMPTION_PRIORITY(PreemptPriority));
+
+  prioritygroup = NVIC_GetPriorityGrouping();
+
+  NVIC_SetPriority(IRQn, NVIC_EncodePriority(prioritygroup, PreemptPriority, SubPriority));
+}
+
+/**
+  * @brief  Enables a device specific interrupt in the NVIC interrupt controller.
+  * @note   To configure interrupts priority correctly, the NVIC_PriorityGroupConfig()
+  *         function should be called before.
+  * @param  IRQn External interrupt number.
+  *         This parameter can be an enumerator of IRQn_Type enumeration
+  *         (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32mp1xxxx.h))
+  * @retval None
+  */
+void HAL_NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+  /* Check the parameters */
+  assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
+
+  /* Enable interrupt */
+  NVIC_EnableIRQ(IRQn);
+}
+
+/**
+  * @brief  Disables a device specific interrupt in the NVIC interrupt controller.
+  * @param  IRQn External interrupt number.
+  *         This parameter can be an enumerator of IRQn_Type enumeration
+  *         (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32mp1xxxx.h))
+  * @retval None
+  */
+void HAL_NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+  /* Check the parameters */
+  assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
+
+  /* Disable interrupt */
+  NVIC_DisableIRQ(IRQn);
+}
+
+/**
+  * @brief  Initiates a system reset request to reset the MCU.
+  * @retval None
+  */
+void HAL_NVIC_SystemReset(void)
+{
+  /* System Reset */
+  NVIC_SystemReset();
+}
+
+/**
+  * @brief  Initializes the System Timer and its interrupt, and starts the System Tick Timer.
+  *         Counter is in free running mode to generate periodic interrupts.
+  * @param  TicksNumb: Specifies the ticks Number of ticks between two interrupts.
+  * @retval status:  - 0  Function succeeded.
+  *                  - 1  Function failed.
+  */
+uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb)
+{
+  return SysTick_Config(TicksNumb);
+}
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_Exported_Functions_Group2 Peripheral Control functions
+ *  @brief   Cortex control functions
+ *
+@verbatim
+  ==============================================================================
+                      ##### Peripheral Control functions #####
+  ==============================================================================
+    [..]
+      This subsection provides a set of functions allowing to control the CORTEX
+      (NVIC, SYSTICK, MPU) functionalities.
+
+
+@endverbatim
+  * @{
+  */
+#if (__MPU_PRESENT == 1)
+/**
+  * @brief  Initializes and configures the Region and the memory to be protected.
+  * @param  MPU_Init: Pointer to a MPU_Region_InitTypeDef structure that contains
+  *                the initialization and configuration information.
+  * @retval None
+  */
+void HAL_MPU_ConfigRegion(MPU_Region_InitTypeDef *MPU_Init)
+{
+  /* Check the parameters */
+  assert_param(IS_MPU_REGION_NUMBER(MPU_Init->Number));
+  assert_param(IS_MPU_REGION_ENABLE(MPU_Init->Enable));
+
+  /* Set the Region number */
+  MPU->RNR = MPU_Init->Number;
+
+  if ((MPU_Init->Enable) != RESET)
+  {
+    /* Check the parameters */
+    assert_param(IS_MPU_INSTRUCTION_ACCESS(MPU_Init->DisableExec));
+    assert_param(IS_MPU_REGION_PERMISSION_ATTRIBUTE(MPU_Init->AccessPermission));
+    assert_param(IS_MPU_TEX_LEVEL(MPU_Init->TypeExtField));
+    assert_param(IS_MPU_ACCESS_SHAREABLE(MPU_Init->IsShareable));
+    assert_param(IS_MPU_ACCESS_CACHEABLE(MPU_Init->IsCacheable));
+    assert_param(IS_MPU_ACCESS_BUFFERABLE(MPU_Init->IsBufferable));
+    assert_param(IS_MPU_SUB_REGION_DISABLE(MPU_Init->SubRegionDisable));
+    assert_param(IS_MPU_REGION_SIZE(MPU_Init->Size));
+
+    MPU->RBAR = MPU_Init->BaseAddress;
+    MPU->RASR = ((uint32_t)MPU_Init->DisableExec             << MPU_RASR_XN_Pos)   |
+                ((uint32_t)MPU_Init->AccessPermission        << MPU_RASR_AP_Pos)   |
+                ((uint32_t)MPU_Init->TypeExtField            << MPU_RASR_TEX_Pos)  |
+                ((uint32_t)MPU_Init->IsShareable             << MPU_RASR_S_Pos)    |
+                ((uint32_t)MPU_Init->IsCacheable             << MPU_RASR_C_Pos)    |
+                ((uint32_t)MPU_Init->IsBufferable            << MPU_RASR_B_Pos)    |
+                ((uint32_t)MPU_Init->SubRegionDisable        << MPU_RASR_SRD_Pos)  |
+                ((uint32_t)MPU_Init->Size                    << MPU_RASR_SIZE_Pos) |
+                ((uint32_t)MPU_Init->Enable                  << MPU_RASR_ENABLE_Pos);
+  }
+  else
+  {
+    MPU->RBAR = 0x00;
+    MPU->RASR = 0x00;
+  }
+}
+#endif /* __MPU_PRESENT */
+
+/**
+  * @brief  Gets the priority grouping field from the NVIC Interrupt Controller.
+  * @retval Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field)
+  */
+uint32_t HAL_NVIC_GetPriorityGrouping(void)
+{
+  /* Get the PRIGROUP[10:8] field value */
+  return NVIC_GetPriorityGrouping();
+}
+
+/**
+  * @brief  Gets the priority of an interrupt.
+  * @param  IRQn: External interrupt number.
+  *         This parameter can be an enumerator of IRQn_Type enumeration
+  *         (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32mp1xxxx.h))
+  * @param   PriorityGroup: the priority grouping bits length.
+  *         This parameter can be one of the following values:
+  *           @arg NVIC_PRIORITYGROUP_0: 0 bits for preemption priority
+  *                                      4 bits for subpriority
+  *           @arg NVIC_PRIORITYGROUP_1: 1 bits for preemption priority
+  *                                      3 bits for subpriority
+  *           @arg NVIC_PRIORITYGROUP_2: 2 bits for preemption priority
+  *                                      2 bits for subpriority
+  *           @arg NVIC_PRIORITYGROUP_3: 3 bits for preemption priority
+  *                                      1 bits for subpriority
+  *           @arg NVIC_PRIORITYGROUP_4: 4 bits for preemption priority
+  *                                      0 bits for subpriority
+  * @param  pPreemptPriority: Pointer on the Preemptive priority value (starting from 0).
+  * @param  pSubPriority: Pointer on the Subpriority value (starting from 0).
+  * @retval None
+  */
+void HAL_NVIC_GetPriority(IRQn_Type IRQn, uint32_t PriorityGroup, uint32_t *pPreemptPriority, uint32_t *pSubPriority)
+{
+  /* Check the parameters */
+  assert_param(IS_NVIC_PRIORITY_GROUP(PriorityGroup));
+  /* Get priority for Cortex-M system or device specific interrupts */
+  NVIC_DecodePriority(NVIC_GetPriority(IRQn), PriorityGroup, pPreemptPriority, pSubPriority);
+}
+
+/**
+  * @brief  Sets Pending bit of an external interrupt.
+  * @param  IRQn External interrupt number
+  *         This parameter can be an enumerator of IRQn_Type enumeration
+  *         (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32mp1xxxx.h))
+  * @retval None
+  */
+void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+  /* Check the parameters */
+  assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
+
+  /* Set interrupt pending */
+  NVIC_SetPendingIRQ(IRQn);
+}
+
+/**
+  * @brief  Gets Pending Interrupt (reads the pending register in the NVIC
+  *         and returns the pending bit for the specified interrupt).
+  * @param  IRQn External interrupt number.
+  *          This parameter can be an enumerator of IRQn_Type enumeration
+  *         (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32mp1xxxx.h))
+  * @retval status: - 0  Interrupt status is not pending.
+  *                 - 1  Interrupt status is pending.
+  */
+uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+  /* Check the parameters */
+  assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
+
+  /* Return 1 if pending else 0 */
+  return NVIC_GetPendingIRQ(IRQn);
+}
+
+/**
+  * @brief  Clears the pending bit of an external interrupt.
+  * @param  IRQn External interrupt number.
+  *         This parameter can be an enumerator of IRQn_Type enumeration
+  *         (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32mp1xxxx.h))
+  * @retval None
+  */
+void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+  /* Check the parameters */
+  assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
+
+  /* Clear pending interrupt */
+  NVIC_ClearPendingIRQ(IRQn);
+}
+
+/**
+  * @brief Gets active interrupt ( reads the active register in NVIC and returns the active bit).
+  * @param IRQn External interrupt number
+  *         This parameter can be an enumerator of IRQn_Type enumeration
+  *         (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32mp1xxxx.h))
+  * @retval status: - 0  Interrupt status is not pending.
+  *                 - 1  Interrupt status is pending.
+  */
+uint32_t HAL_NVIC_GetActive(IRQn_Type IRQn)
+{
+  /* Check the parameters */
+  assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
+
+  /* Return 1 if active else 0 */
+  return NVIC_GetActive(IRQn);
+}
+
+
+/**
+  * @brief  This function handles SYSTICK interrupt request.
+  * @retval None
+  */
+void HAL_SYSTICK_IRQHandler(void)
+{
+  HAL_SYSTICK_Callback();
+}
+
+/**
+  * @brief  SYSTICK callback.
+  * @retval None
+  */
+__weak void HAL_SYSTICK_Callback(void)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_SYSTICK_Callback could be implemented in the user file
+   */
+}
+
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+

meta-st/meta-st-stm32mp-addons/mx/stm32mp157d-vrpmdv-mon-mx/Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_dma_ex.c

@@ -0,0 +1,601 @@
+/**
+  ******************************************************************************
+  * @file    stm32mp1xx_hal_dma_ex.c
+  * @author  MCD Application Team
+  * @brief   DMA Extension HAL module driver
+  *          This file provides firmware functions to manage the following
+  *          functionalities of the DMA Extension peripheral:
+  *           + Extended features functions
+  *
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  @verbatim
+  ==============================================================================
+                        ##### How to use this driver #####
+  ==============================================================================
+  [..]
+  The DMA Extension HAL driver can be used as follows:
+   (+) Start a multi buffer transfer using the HAL_DMA_MultiBufferStart() function
+       for polling mode or HAL_DMA_MultiBufferStart_IT() for interrupt mode.
+
+   (+) Configure the DMA_MUX Synchronization Block using HAL_DMAEx_ConfigMuxSync function.
+   (+) Configure the DMA_MUX Request Generator Block using HAL_DMAEx_ConfigMuxRequestGenerator function.
+       Functions HAL_DMAEx_EnableMuxRequestGenerator and HAL_DMAEx_DisableMuxRequestGenerator can then be used
+       to respectively enable/disable the request generator.
+
+   (+) To handle the DMAMUX Interrupts, the function  HAL_DMAEx_MUX_IRQHandler should be called from
+       the DMAMUX IRQ handler i.e DMAMUX1_OVR_IRQHandler or DMAMUX2_OVR_IRQHandler .
+       As only one interrupt line is available for all DMAMUX channels and request generators , HAL_DMA_MUX_IRQHandler should be
+       called with, as parameter, the appropriate DMA handle as many as used DMAs in the user project
+      (exception done if a given DMA is not using the DMAMUX SYNC block neither a request generator)
+
+     -@-  In Memory-to-Memory transfer mode, Multi (Double) Buffer mode is not allowed.
+     -@-  When Multi (Double) Buffer mode is enabled, the transfer is circular by default.
+     -@-  In Multi (Double) buffer mode, it is possible to update the base address for
+          the AHB memory port on the fly (DMA_SxM0AR or DMA_SxM1AR) when the stream is enabled.
+     -@-  Multi (Double) buffer mode is only possible with D2 DMAs i.e DMA1 or DMA2. not BDMA.
+          Multi (Double) buffer mode is not possible with D3 BDMA.
+
+  @endverbatim
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32mp1xx_hal.h"
+
+/** @addtogroup STM32MP1xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup DMAEx DMAEx
+  * @brief DMA Extended HAL module driver
+  * @{
+  */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private Constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/** @addtogroup DMAEx_Private_Functions
+  * @{
+  */
+
+static void DMA_MultiBufferSetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
+
+/**
+  * @}
+  */
+
+/* Exported functions ---------------------------------------------------------*/
+
+/** @addtogroup DMAEx_Exported_Functions
+  * @{
+  */
+
+
+/** @addtogroup DMAEx_Exported_Functions_Group1
+  *
+@verbatim
+ ===============================================================================
+                #####  Extended features functions  #####
+ ===============================================================================
+    [..]  This section provides functions allowing to:
+      (+) Configure the source, destination address and data length and
+          Start MultiBuffer DMA transfer
+      (+) Configure the source, destination address and data length and
+          Start MultiBuffer DMA transfer with interrupt
+      (+) Change on the fly the memory0 or memory1 address.
+      (+) Configure the DMA_MUX Synchronization Block using HAL_DMAEx_ConfigMuxSync function.
+      (+) Configure the DMA_MUX Request Generator Block using HAL_DMAEx_ConfigMuxRequestGenerator function.
+      (+) Functions HAL_DMAEx_EnableMuxRequestGenerator and HAL_DMAEx_DisableMuxRequestGenerator can then be used
+          to respectively enable/disable the request generator.
+      (+) Handle DMAMUX interrupts using HAL_DMAEx_MUX_IRQHandler : should be called from
+          the DMAMUX IRQ handler i.e DMAMUX1_OVR_IRQHandler or DMAMUX2_OVR_IRQHandler
+
+@endverbatim
+  * @{
+  */
+
+
+/**
+  * @brief  Starts the multi_buffer DMA Transfer.
+  * @param  hdma      : pointer to a DMA_HandleTypeDef structure that contains
+  *                     the configuration information for the specified DMA Stream.
+  * @param  SrcAddress: The source memory Buffer address
+  * @param  DstAddress: The destination memory Buffer address
+  * @param  SecondMemAddress: The second memory Buffer address in case of multi buffer Transfer
+  * @param  DataLength: The length of data to be transferred from source to destination
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+  __IO uint32_t *ifcRegister_Base; /* DMA Stream Interrupt Clear register */
+
+  /* Check the parameters */
+  assert_param(IS_DMA_BUFFER_SIZE(DataLength));
+  assert_param(IS_DMA_STREAM_ALL_INSTANCE(hdma->Instance));
+
+  /* Memory-to-memory transfer not supported in double buffering mode */
+  if (hdma->Init.Direction == DMA_MEMORY_TO_MEMORY)
+  {
+    hdma->ErrorCode = HAL_DMA_ERROR_NOT_SUPPORTED;
+    status = HAL_ERROR;
+  }
+  else
+  {
+    /* Process Locked */
+    __HAL_LOCK(hdma);
+
+    if (HAL_DMA_STATE_READY == hdma->State)
+    {
+      /* Change DMA peripheral state */
+      hdma->State = HAL_DMA_STATE_BUSY;
+
+      /* Initialize the error code */
+      hdma->ErrorCode = HAL_DMA_ERROR_NONE;
+
+      /* Enable the Double buffer mode */
+      ((DMA_Stream_TypeDef *)hdma->Instance)->CR |= (uint32_t)DMA_SxCR_DBM;
+
+      /* Configure DMA Stream destination address */
+      ((DMA_Stream_TypeDef *)hdma->Instance)->M1AR = SecondMemAddress;
+
+      /* Configure the source, destination address and the data length */
+      DMA_MultiBufferSetConfig(hdma, SrcAddress, DstAddress, DataLength);
+
+      /* Calculate the interrupt clear flag register (IFCR) base address  */
+      ifcRegister_Base = (uint32_t *)((uint32_t)(hdma->StreamBaseAddress + 8U));
+
+      /* Clear all flags */
+      *ifcRegister_Base = 0x3FUL << (hdma->StreamIndex & 0x1FU);
+
+      /* Clear the DMAMUX synchro overrun flag */
+      hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask;
+
+      if(hdma->DMAmuxRequestGen != 0U)
+      {
+        /* Clear the DMAMUX request generator overrun flag */
+        hdma->DMAmuxRequestGenStatus->RGCFR = hdma->DMAmuxRequestGenStatusMask;
+      }
+
+      /* Enable the peripheral */
+      __HAL_DMA_ENABLE(hdma);
+    }
+    else
+    {
+      /* Set the error code to busy */
+      hdma->ErrorCode = HAL_DMA_ERROR_BUSY;
+
+      /* Return error status */
+      status = HAL_ERROR;
+    }
+  }
+  return status;
+}
+
+/**
+  * @brief  Starts the multi_buffer DMA Transfer with interrupt enabled.
+  * @param  hdma:       pointer to a DMA_HandleTypeDef structure that contains
+  *                     the configuration information for the specified DMA Stream.
+  * @param  SrcAddress: The source memory Buffer address
+  * @param  DstAddress: The destination memory Buffer address
+  * @param  SecondMemAddress: The second memory Buffer address in case of multi buffer Transfer
+  * @param  DataLength: The length of data to be transferred from source to destination
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+  __IO uint32_t *ifcRegister_Base; /* DMA Stream Interrupt Clear register */
+
+  /* Check the parameters */
+  assert_param(IS_DMA_BUFFER_SIZE(DataLength));
+  assert_param(IS_DMA_STREAM_ALL_INSTANCE(hdma->Instance));
+
+  /* Memory-to-memory transfer not supported in double buffering mode */
+  if(hdma->Init.Direction == DMA_MEMORY_TO_MEMORY)
+  {
+    hdma->ErrorCode = HAL_DMA_ERROR_NOT_SUPPORTED;
+    return HAL_ERROR;
+  }
+
+  /* Process locked */
+  __HAL_LOCK(hdma);
+
+  if (HAL_DMA_STATE_READY == hdma->State)
+  {
+    /* Change DMA peripheral state */
+    hdma->State = HAL_DMA_STATE_BUSY;
+
+    /* Initialize the error code */
+    hdma->ErrorCode = HAL_DMA_ERROR_NONE;
+
+    /* Enable the Double buffer mode */
+    ((DMA_Stream_TypeDef *)hdma->Instance)->CR |= (uint32_t)DMA_SxCR_DBM;
+
+    /* Configure DMA Stream destination address */
+    ((DMA_Stream_TypeDef *)hdma->Instance)->M1AR = SecondMemAddress;
+
+    /* Configure the source, destination address and the data length */
+    DMA_MultiBufferSetConfig(hdma, SrcAddress, DstAddress, DataLength);
+
+    /* Calculate the interrupt clear flag register (IFCR) base address  */
+    ifcRegister_Base = (uint32_t *)((uint32_t)(hdma->StreamBaseAddress + 8U));
+
+    /* Clear all flags */
+    *ifcRegister_Base = 0x3FUL << (hdma->StreamIndex & 0x1FU);
+
+    /* Clear the DMAMUX synchro overrun flag */
+    hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask;
+
+    if(hdma->DMAmuxRequestGen != 0U)
+    {
+      /* Clear the DMAMUX request generator overrun flag */
+      hdma->DMAmuxRequestGenStatus->RGCFR = hdma->DMAmuxRequestGenStatusMask;
+    }
+
+    /* Enable Common interrupts*/
+    MODIFY_REG(((DMA_Stream_TypeDef *)hdma->Instance)->CR, (DMA_IT_TC | DMA_IT_TE | DMA_IT_DME | DMA_IT_HT), (DMA_IT_TC | DMA_IT_TE | DMA_IT_DME));
+    ((DMA_Stream_TypeDef *)hdma->Instance)->FCR |= DMA_IT_FE;
+
+      if((hdma->XferHalfCpltCallback != NULL) || (hdma->XferM1HalfCpltCallback != NULL))
+    {
+      /*Enable Half Transfer IT if corresponding Callback is set*/
+      ((DMA_Stream_TypeDef *)hdma->Instance)->CR  |= DMA_IT_HT;
+    }
+
+    /* Check if DMAMUX Synchronization is enabled*/
+    if ((hdma->DMAmuxChannel->CCR & DMAMUX_CxCR_SE) != 0U)
+    {
+      /* Enable DMAMUX sync overrun IT*/
+      hdma->DMAmuxChannel->CCR |= DMAMUX_CxCR_SOIE;
+    }
+
+    if(hdma->DMAmuxRequestGen != 0U)
+    {
+      /* if using DMAMUX request generator, enable the DMAMUX request generator overrun IT*/
+      /* enable the request gen overrun IT*/
+      hdma->DMAmuxRequestGen->RGCR |= DMAMUX_RGxCR_OIE;
+    }
+
+    /* Enable the peripheral */
+    __HAL_DMA_ENABLE(hdma);
+  }
+  else
+  {
+    /* Set the error code to busy */
+    hdma->ErrorCode = HAL_DMA_ERROR_BUSY;
+
+    /* Return error status */
+    status = HAL_ERROR;
+  }
+  return status;
+}
+
+/**
+  * @brief  Change the memory0 or memory1 address on the fly.
+  * @param  hdma:       pointer to a DMA_HandleTypeDef structure that contains
+  *                     the configuration information for the specified DMA Stream.
+  * @param  Address:    The new address
+  * @param  memory:     the memory to be changed, This parameter can be one of
+  *                     the following values:
+  *                      MEMORY0 /
+  *                      MEMORY1
+  * @note   The MEMORY0 address can be changed only when the current transfer use
+  *         MEMORY1 and the MEMORY1 address can be changed only when the current
+  *         transfer use MEMORY0.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DMAEx_ChangeMemory(DMA_HandleTypeDef *hdma, uint32_t Address, HAL_DMA_MemoryTypeDef memory)
+{
+  if (memory == MEMORY0)
+  {
+    /* change the memory0 address */
+    ((DMA_Stream_TypeDef *)hdma->Instance)->M0AR = Address;
+  }
+  else
+  {
+    /* change the memory1 address */
+    ((DMA_Stream_TypeDef *)hdma->Instance)->M1AR = Address;
+  }
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Configure the DMAMUX synchronization parameters for a given DMA stream (instance).
+  * @param  hdma:       pointer to a DMA_HandleTypeDef structure that contains
+  *                     the configuration information for the specified DMA Stream.
+  * @param  pSyncConfig : pointer to HAL_DMA_MuxSyncConfigTypeDef : contains the DMAMUX synchronization parameters
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DMAEx_ConfigMuxSync(DMA_HandleTypeDef *hdma, HAL_DMA_MuxSyncConfigTypeDef *pSyncConfig)
+{
+  uint32_t syncSignalID = 0;
+  uint32_t syncPolarity = 0;
+
+  /* Check the parameters */
+  assert_param(IS_DMA_STREAM_ALL_INSTANCE(hdma->Instance));
+  assert_param(IS_DMAMUX_SYNC_STATE(pSyncConfig->SyncEnable));
+  assert_param(IS_DMAMUX_SYNC_EVENT(pSyncConfig->EventEnable));
+  assert_param(IS_DMAMUX_SYNC_REQUEST_NUMBER(pSyncConfig->RequestNumber));
+
+  if (pSyncConfig->SyncEnable == ENABLE)
+  {
+    assert_param(IS_DMAMUX_SYNC_POLARITY(pSyncConfig->SyncPolarity));
+    assert_param(IS_DMAMUX_SYNC_SIGNAL_ID(pSyncConfig->SyncSignalID));
+    syncSignalID = pSyncConfig->SyncSignalID;
+    syncPolarity = pSyncConfig->SyncPolarity;
+  }
+
+  /*Check if the DMA state is ready */
+  if (hdma->State == HAL_DMA_STATE_READY)
+  {
+    /* Process Locked */
+    __HAL_LOCK(hdma);
+
+    /* Disable the synchronization and event generation before applying a new config */
+    CLEAR_BIT(hdma->DMAmuxChannel->CCR, (DMAMUX_CxCR_SE | DMAMUX_CxCR_EGE));
+
+    /* Set the new synchronization parameters (and keep the request ID filled during the Init)*/
+    MODIFY_REG(hdma->DMAmuxChannel->CCR, \
+               (~DMAMUX_CxCR_DMAREQ_ID), \
+               (syncSignalID << DMAMUX_CxCR_SYNC_ID_Pos)       | \
+               ((pSyncConfig->RequestNumber - 1U) << DMAMUX_CxCR_NBREQ_Pos) | \
+               syncPolarity | ((uint32_t)pSyncConfig->SyncEnable << DMAMUX_CxCR_SE_Pos)    | \
+               ((uint32_t)pSyncConfig->EventEnable << DMAMUX_CxCR_EGE_Pos));
+
+    /* Process Locked */
+    __HAL_UNLOCK(hdma);
+
+    return HAL_OK;
+  }
+  else
+  {
+    /* Set the error code to busy */
+    hdma->ErrorCode = HAL_DMA_ERROR_BUSY;
+
+    /* Return error status */
+    return HAL_ERROR;
+  }
+}
+
+/**
+  * @brief  Configure the DMAMUX request generator block used by the given DMA stream (instance).
+  * @param  hdma:       pointer to a DMA_HandleTypeDef structure that contains
+  *                     the configuration information for the specified DMA Stream.
+  * @param  pRequestGeneratorConfig : pointer to HAL_DMA_MuxRequestGeneratorConfigTypeDef :
+  *         contains the request generator parameters.
+  *
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DMAEx_ConfigMuxRequestGenerator(DMA_HandleTypeDef *hdma, HAL_DMA_MuxRequestGeneratorConfigTypeDef *pRequestGeneratorConfig)
+{
+  HAL_StatusTypeDef status;
+  HAL_DMA_StateTypeDef temp_state = hdma->State;
+
+  /* Check the parameters */
+  assert_param(IS_DMA_STREAM_ALL_INSTANCE(hdma->Instance));
+
+  assert_param(IS_DMAMUX_REQUEST_GEN_SIGNAL_ID(pRequestGeneratorConfig->SignalID));
+
+  assert_param(IS_DMAMUX_REQUEST_GEN_POLARITY(pRequestGeneratorConfig->Polarity));
+  assert_param(IS_DMAMUX_REQUEST_GEN_REQUEST_NUMBER(pRequestGeneratorConfig->RequestNumber));
+
+  /* check if the DMA state is ready
+     and DMA is using a DMAMUX request generator block
+  */
+  if(hdma->DMAmuxRequestGen == 0U)
+  {
+    /* Set the error code to busy */
+    hdma->ErrorCode = HAL_DMA_ERROR_PARAM;
+
+    /* error status */
+    status = HAL_ERROR;
+  }
+  else if(((hdma->DMAmuxRequestGen->RGCR & DMAMUX_RGxCR_GE) == 0U) && (temp_state == HAL_DMA_STATE_READY))
+  {
+    /* RequestGenerator must be disable prior to the configuration i.e GE bit is 0 */
+
+    /* Process Locked */
+    __HAL_LOCK(hdma);
+
+    /* Set the request generator new parameters*/
+    hdma->DMAmuxRequestGen->RGCR = pRequestGeneratorConfig->SignalID | \
+                                  ((pRequestGeneratorConfig->RequestNumber - 1U) << DMAMUX_RGxCR_GNBREQ_Pos)| \
+                                   pRequestGeneratorConfig->Polarity;
+    /* Process Locked */
+    __HAL_UNLOCK(hdma);
+
+    return HAL_OK;
+  }
+  else
+  {
+    /* Set the error code to busy */
+    hdma->ErrorCode = HAL_DMA_ERROR_BUSY;
+
+    /* error status */
+    status = HAL_ERROR;
+  }
+
+  return status;
+}
+
+/**
+  * @brief  Enable the DMAMUX request generator block used by the given DMA stream (instance).
+  * @param  hdma:       pointer to a DMA_HandleTypeDef structure that contains
+  *                     the configuration information for the specified DMA Stream.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DMAEx_EnableMuxRequestGenerator(DMA_HandleTypeDef *hdma)
+{
+  /* Check the parameters */
+  assert_param(IS_DMA_STREAM_ALL_INSTANCE(hdma->Instance));
+
+  /* check if the DMA state is ready
+     and DMA is using a DMAMUX request generator block */
+  if((hdma->State != HAL_DMA_STATE_RESET) && (hdma->DMAmuxRequestGen != 0U))
+  {
+
+    /* Enable the request generator*/
+    hdma->DMAmuxRequestGen->RGCR |= DMAMUX_RGxCR_GE;
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_ERROR;
+  }
+}
+
+/**
+  * @brief  Disable the DMAMUX request generator block used by the given DMA stream (instance).
+  * @param  hdma:       pointer to a DMA_HandleTypeDef structure that contains
+  *                     the configuration information for the specified DMA Stream.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DMAEx_DisableMuxRequestGenerator(DMA_HandleTypeDef *hdma)
+{
+  /* Check the parameters */
+  assert_param(IS_DMA_STREAM_ALL_INSTANCE(hdma->Instance));
+
+  /* check if the DMA state is ready
+     and DMA is using a DMAMUX request generator block */
+  if((hdma->State != HAL_DMA_STATE_RESET) && (hdma->DMAmuxRequestGen != 0U))
+  {
+
+    /* Disable the request generator*/
+    hdma->DMAmuxRequestGen->RGCR &= ~DMAMUX_RGxCR_GE;
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_ERROR;
+  }
+}
+
+/**
+  * @brief  Handles DMAMUX interrupt request.
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *               the configuration information for the specified DMA Stream.
+  * @retval None
+  */
+void HAL_DMAEx_MUX_IRQHandler(DMA_HandleTypeDef *hdma)
+{
+  /* Check for DMAMUX Synchronization overrun */
+  if ((hdma->DMAmuxChannelStatus->CSR & hdma->DMAmuxChannelStatusMask) != 0U)
+  {
+    /* Disable the synchro overrun interrupt */
+    hdma->DMAmuxChannel->CCR &= ~DMAMUX_CxCR_SOIE;
+
+    /* Clear the DMAMUX synchro overrun flag */
+    hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask;
+
+    /* Update error code */
+    hdma->ErrorCode |= HAL_DMA_ERROR_SYNC;
+
+    if (hdma->XferErrorCallback != NULL)
+    {
+      /* Transfer error callback */
+      hdma->XferErrorCallback(hdma);
+    }
+  }
+
+  if(hdma->DMAmuxRequestGen != 0)
+  {
+    /* if using a DMAMUX request generator block Check for DMAMUX request generator overrun */
+    if ((hdma->DMAmuxRequestGenStatus->RGSR & hdma->DMAmuxRequestGenStatusMask) != 0U)
+    {
+      /* Disable the request gen overrun interrupt */
+      hdma->DMAmuxRequestGen->RGCR &= ~DMAMUX_RGxCR_OIE;
+
+      /* Clear the DMAMUX request generator overrun flag */
+      hdma->DMAmuxRequestGenStatus->RGCFR = hdma->DMAmuxRequestGenStatusMask;
+
+      /* Update error code */
+      hdma->ErrorCode |= HAL_DMA_ERROR_REQGEN;
+
+      if (hdma->XferErrorCallback != NULL)
+      {
+        /* Transfer error callback */
+        hdma->XferErrorCallback(hdma);
+      }
+    }
+  }
+}
+
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup DMAEx_Private_Functions
+  * @{
+  */
+
+/**
+  * @brief  Set the DMA Transfer parameter.
+  * @param  hdma:       pointer to a DMA_HandleTypeDef structure that contains
+  *                     the configuration information for the specified DMA Stream.
+  * @param  SrcAddress: The source memory Buffer address
+  * @param  DstAddress: The destination memory Buffer address
+  * @param  DataLength: The length of data to be transferred from source to destination
+  * @retval HAL status
+  */
+static void DMA_MultiBufferSetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength)
+{
+  assert_param(IS_DMA_STREAM_ALL_INSTANCE(hdma->Instance));
+
+  /* Configure DMA Stream data length */
+  ((DMA_Stream_TypeDef *)hdma->Instance)->NDTR = DataLength;
+
+  /* Peripheral to Memory */
+  if ((hdma->Init.Direction) == DMA_MEMORY_TO_PERIPH)
+  {
+    /* Configure DMA Stream destination address */
+    ((DMA_Stream_TypeDef *)hdma->Instance)->PAR = DstAddress;
+
+    /* Configure DMA Stream source address */
+    ((DMA_Stream_TypeDef *)hdma->Instance)->M0AR = SrcAddress;
+  }
+  /* Memory to Peripheral */
+  else
+  {
+    /* Configure DMA Stream source address */
+    ((DMA_Stream_TypeDef *)hdma->Instance)->PAR = SrcAddress;
+
+    /* Configure DMA Stream destination address */
+    ((DMA_Stream_TypeDef *)hdma->Instance)->M0AR = DstAddress;
+  }
+}
+
+/**
+  * @}
+  */
+
+#endif /* HAL_DMA_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */

meta-st/meta-st-stm32mp-addons/mx/stm32mp157d-vrpmdv-mon-mx/Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_exti.c

@@ -0,0 +1,724 @@
+/**
+  ******************************************************************************
+  * @file    stm32mp1xx_hal_exti.c
+  * @author  MCD Application Team
+  * @brief   EXTI HAL module driver.
+  *          This file provides firmware functions to manage the following
+  *          functionalities of the General Purpose Input/Output (EXTI) peripheral:
+  *           + Initialization and de-initialization functions
+  *           + IO operation functions
+  *
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  @verbatim
+  ==============================================================================
+                    ##### EXTI Peripheral features #####
+  ==============================================================================
+  [..]
+    (+) Each Exti line can be configured within this driver.
+
+    (+) Exti line can be configured in 3 different modes
+        (++) Interrupt
+        (++) Event
+        (++) Both of them
+
+    (+) Configurable Exti lines can be configured with 3 different triggers
+        (++) Rising
+        (++) Falling
+        (++) Both of them
+
+    (+) When set in interrupt mode, configurable Exti lines have two diffenrents
+        interrupt pending registers which allow to distinguish which transition
+        occurs:
+        (++) Rising edge pending interrupt
+        (++) Falling
+
+    (+) Exti lines 0 to 15 are linked to gpio pin number 0 to 15. Gpio port can
+        be selected throught multiplexer.
+
+                     ##### How to use this driver #####
+  ==============================================================================
+  [..]
+
+    (#) Configure the configurable EXTI line using HAL_EXTI_SetConfigLine().
+        NOTE: in addition HAL_EXTI_SetInterruptAndEventMask shall be used
+        to configure interrupt and events mask of this configurable line
+        (++) Choose the interrupt line number by setting "Line" member from
+             EXTI_ConfigTypeDef structure.
+        (++) Configure the interrupt and/or event mode using "Mode" member from
+             EXTI_ConfigTypeDef structure.
+        (++) For configurable lines, configure rising and/or falling trigger
+             "Trigger" member from EXTI_ConfigTypeDef structure.
+        (++) For Exti lines linked to gpio, choose gpio port using "GPIOSel"
+             member from GPIO_InitTypeDef structure.
+
+    (#) Get current Exti configuration of a dedicated line using
+        HAL_EXTI_GetConfigLine().
+        (++) Provide exiting handle as parameter.
+        (++) Provide pointer on EXTI_ConfigTypeDef structure as second parameter.
+
+    (#) Clear Exti configuration of a dedicated line using HAL_EXTI_GetConfigLine().
+        (++) Provide exiting handle as parameter.
+
+    (#) Register callback to treat Exti interrupts using HAL_EXTI_RegisterCallback().
+        (++) Provide exiting handle as first parameter.
+        (++) Provide which callback will be registered using one value from
+             EXTI_CallbackIDTypeDef.
+        (++) Provide callback function pointer.
+
+    (#) Get interrupt pending bit using HAL_EXTI_GetPending().
+
+    (#) Clear interrupt pending bit using HAL_EXTI_GetPending().
+
+    (#) Generate software interrupt using HAL_EXTI_GenerateSWI().
+
+  @endverbatim
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32mp1xx_hal.h"
+
+/** @addtogroup STM32MP1xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup EXTI
+  * @{
+  */
+/** MISRA C:2012 deviation rule has been granted for following rule:
+  * Rule-18.1_b - Medium: Array `EXTICR' 1st subscript interval [0,7] may be out
+  * of bounds [0,3] in following API :
+  * HAL_EXTI_SetConfigLine
+  * HAL_EXTI_GetConfigLine
+  * HAL_EXTI_ClearConfigLine
+  */
+
+#ifdef HAL_EXTI_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private defines ------------------------------------------------------------*/
+/** @defgroup EXTI_Private_Constants EXTI Private Constants
+  * @{
+  */
+#define EXTI_MODE_C1                        0x10u
+#define EXTI_MODE_C2                        0x20u
+#define EXTI_MODE_INTERRUPT                 0x01u
+#define EXTI_MODE_EVENT                     0x02u
+#define EXTI_MODE_OFFSET                    0x04u   /* 0x10: offset between CPU IMR/EMR registers */
+#define EXTI_CONFIG_OFFSET                  0x08u   /* 0x20: offset between CPU Rising/Falling configuration registers */
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup EXTI_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup EXTI_Exported_Functions_Group1
+ *  @brief    Configuration functions
+ *
+@verbatim
+ ===============================================================================
+              ##### Configuration functions #####
+ ===============================================================================
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Set configuration except Interrupt and Event mask of a dedicated Exti line.
+  *         It is relevant only for configurable events.
+  * @param  hexti Exti handle.
+  * @param  pExtiConfig Pointer on EXTI configuration to be set.
+  * @retval HAL Status.
+  */
+HAL_StatusTypeDef HAL_EXTI_SetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig)
+{
+  __IO uint32_t *regaddr;
+  uint32_t regval;
+  uint32_t linepos;
+  uint32_t maskline;
+  uint32_t offset;
+
+  /* Check null pointer */
+  if ((hexti == NULL) || (pExtiConfig == NULL))
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check parameters */
+  assert_param(IS_EXTI_LINE(pExtiConfig->Line));
+
+  /* Assign line number to handle */
+  hexti->Line = pExtiConfig->Line;
+
+  /* compute line register offset and line mask */
+  offset = ((pExtiConfig->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT);
+  linepos = (pExtiConfig->Line & EXTI_PIN_MASK);
+  maskline = (1uL << linepos);
+
+  /* Configure triggers for configurable lines */
+  if ((pExtiConfig->Line & EXTI_CONFIG) != 0x0u)
+  {
+    assert_param(IS_EXTI_TRIGGER(pExtiConfig->Trigger));
+
+    /* Configure rising trigger */
+    regaddr = (&EXTI->RTSR1 + (EXTI_CONFIG_OFFSET * offset));
+    regval = *regaddr;
+
+    /* Mask or set line */
+    if ((pExtiConfig->Trigger & EXTI_TRIGGER_RISING) != 0x0u)
+    {
+      regval |= maskline;
+    }
+    else
+    {
+      regval &= ~maskline;
+    }
+
+    /* Store rising trigger mode */
+    *regaddr = regval;
+
+    /* Configure falling trigger */
+    regaddr = (&EXTI->FTSR1 + (EXTI_CONFIG_OFFSET * offset));
+    regval = *regaddr;
+
+    /* Mask or set line */
+    if ((pExtiConfig->Trigger & EXTI_TRIGGER_FALLING) != 0x0u)
+    {
+      regval |= maskline;
+    }
+    else
+    {
+      regval &= ~maskline;
+    }
+
+    /* Store falling trigger mode */
+    *regaddr = regval;
+
+    /* Configure gpio port selection in case of gpio exti line */
+    if ((pExtiConfig->Line & EXTI_GPIO) == EXTI_GPIO)
+    {
+      assert_param(IS_EXTI_GPIO_PORT(pExtiConfig->GPIOSel));
+      assert_param(IS_EXTI_GPIO_PIN(linepos));
+
+      regval = EXTI->EXTICR[linepos >> 2u];
+      regval &= ~(EXTI_EXTICR1_EXTI0 << (EXTI_EXTICR1_EXTI1_Pos * (linepos & 0x03u)));
+      regval |= (pExtiConfig->GPIOSel << (EXTI_EXTICR1_EXTI1_Pos * (linepos & 0x03u)));
+      EXTI->EXTICR[linepos >> 2u] = regval;
+    }
+  }
+
+
+  /*Set Interrupt And Event Mask for Core 1 if configuration for Core 1 given into parameter mode */
+  if ((pExtiConfig->Mode & EXTI_MODE_C1) != 0x0u)
+  {
+    regaddr = (&EXTI->C1IMR1 + (EXTI_MODE_OFFSET * offset));
+
+    regval = *regaddr;
+
+    /* Mask or set line */
+    if ((pExtiConfig->Mode & EXTI_MODE_INTERRUPT) != 0x0u)
+    {
+      regval |= maskline;
+    }
+    else
+    {
+      regval &= ~maskline;
+    }
+
+    /* Store interrupt mode */
+    *regaddr = regval;
+  }
+
+  /*Set Interrupt And Event Mask for Core 2 if configuration for Core 2 given into parameter mode  */
+  if ((pExtiConfig->Mode & EXTI_MODE_C2) != 0x0u)
+  {
+    regaddr = (&EXTI->C2IMR1 + (EXTI_MODE_OFFSET * offset));
+
+    regval = *regaddr;
+
+    /* Mask or set line */
+    if ((pExtiConfig->Mode & EXTI_MODE_INTERRUPT) != 0x0u)
+    {
+      regval |= maskline;
+    }
+    else
+    {
+      regval &= ~maskline;
+    }
+
+    /* Store interrupt mode */
+    *regaddr = regval;
+
+    /* The event mode cannot be configured if the line does not support it */
+    assert_param(((pExtiConfig->Line & EXTI_EVENT) == EXTI_EVENT) || ((pExtiConfig->Mode & EXTI_MODE_EVENT) != EXTI_MODE_EVENT));
+
+    regaddr = (&EXTI->C2EMR1 + (EXTI_MODE_OFFSET * offset));
+
+    regval = *regaddr;
+
+    /* Mask or set line */
+    if ((pExtiConfig->Mode & EXTI_MODE_EVENT) != 0x0u)
+    {
+      regval |= maskline;
+    }
+    else
+    {
+      regval &= ~maskline;
+    }
+
+    /* Store event mode */
+    *regaddr = regval;
+  }
+
+  return HAL_OK;
+}
+
+
+/**
+  * @brief  Get configuration of a dedicated Exti line.
+  * @param  hexti Exti handle.
+  * @param  pExtiConfig Pointer on structure to store Exti configuration.
+  * @retval HAL Status.
+  */
+HAL_StatusTypeDef HAL_EXTI_GetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig)
+{
+  __IO uint32_t *regaddr;
+  uint32_t regval;
+  uint32_t linepos;
+  uint32_t maskline;
+  uint32_t offset;
+
+  /* Check null pointer */
+  if ((hexti == NULL) || (pExtiConfig == NULL))
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameter */
+  assert_param(IS_EXTI_LINE(hexti->Line));
+
+  /* Store handle line number to configiguration structure */
+  pExtiConfig->Line = hexti->Line;
+
+  /* compute line register offset and line mask */
+  offset = ((pExtiConfig->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT);
+  linepos = (pExtiConfig->Line & EXTI_PIN_MASK);
+  maskline = (1uL << linepos);
+
+
+  /* 1] Get core 1 mode : interrupt */
+  regaddr = (&EXTI->C1IMR1 + (EXTI_MODE_OFFSET * offset));
+  regval = *regaddr;
+
+  /* Check if selected line is enable */
+  if ((regval & maskline) != 0x0u)
+  {
+    pExtiConfig->Mode = EXTI_MODE_C1_INTERRUPT;
+  }
+  else
+  {
+    pExtiConfig->Mode = EXTI_MODE_C1_NONE;
+  }
+
+  /* Get core 2 mode : interrupt */
+  regaddr = (&EXTI->C2IMR1 + (EXTI_MODE_OFFSET * offset));
+  regval = *regaddr;
+
+  /* Check if selected line is enable */
+  if ((regval & maskline) != 0x0u)
+  {
+    pExtiConfig->Mode |= EXTI_MODE_C2_INTERRUPT;
+  }
+  else
+  {
+    pExtiConfig->Mode |= EXTI_MODE_C2_NONE;
+  }
+
+  /* Get Core 2 mode : event */
+  regaddr = (&EXTI->C2EMR1 + (EXTI_MODE_OFFSET * offset));
+  regval = *regaddr;
+
+  /* Check if selected line is enable */
+  if ((regval & maskline) != 0x0u)
+  {
+    pExtiConfig->Mode |= EXTI_MODE_C2_EVENT;
+  }
+
+  /* Get default Trigger and GPIOSel configuration */
+  pExtiConfig->Trigger = EXTI_TRIGGER_NONE;
+  pExtiConfig->GPIOSel = 0x0u;
+
+  /* 2] Get trigger for configurable lines : rising */
+  if ((pExtiConfig->Line & EXTI_CONFIG) != 0x0u)
+  {
+    regaddr = (&EXTI->RTSR1 + (EXTI_CONFIG_OFFSET * offset));
+    regval = *regaddr;
+
+    /* Check if configuration of selected line is enable */
+    if ((regval & maskline) != 0x0u)
+    {
+      pExtiConfig->Trigger = EXTI_TRIGGER_RISING;
+    }
+
+    /* Get falling configuration */
+    regaddr = (&EXTI->FTSR1 + (EXTI_CONFIG_OFFSET * offset));
+    regval = *regaddr;
+
+    /* Check if configuration of selected line is enable */
+    if ((regval & maskline) != 0x0u)
+    {
+      pExtiConfig->Trigger |= EXTI_TRIGGER_FALLING;
+    }
+
+    /* Get Gpio port selection for gpio lines */
+    if ((pExtiConfig->Line & EXTI_GPIO) == EXTI_GPIO)
+    {
+      assert_param(IS_EXTI_GPIO_PIN(linepos));
+
+      regval = EXTI->EXTICR[linepos >> 2u];
+      pExtiConfig->GPIOSel = ((regval << (EXTI_EXTICR1_EXTI1_Pos * (3uL - (linepos & 0x03u)))) >> 24);
+    }
+  }
+
+  return HAL_OK;
+}
+
+
+/**
+  * @brief  Clear whole configuration of a dedicated Exti line.
+  * @param  hexti Exti handle.
+  * @retval HAL Status.
+  */
+HAL_StatusTypeDef HAL_EXTI_ClearConfigLine(EXTI_HandleTypeDef *hexti)
+{
+  __IO uint32_t *regaddr;
+  uint32_t regval;
+  uint32_t linepos;
+  uint32_t maskline;
+  uint32_t offset;
+
+  /* Check null pointer */
+  if (hexti == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameter */
+  assert_param(IS_EXTI_LINE(hexti->Line));
+
+  /* compute line register offset and line mask */
+  offset = ((hexti->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT);
+  linepos = (hexti->Line & EXTI_PIN_MASK);
+  maskline = (1uL << linepos);
+
+  /* 1] Clear interrupt mode */
+  regaddr = (&EXTI->C1IMR1 + (EXTI_MODE_OFFSET * offset));
+  regval = (*regaddr & ~maskline);
+  *regaddr = regval;
+
+  regaddr = (&EXTI->C2IMR1 + (EXTI_MODE_OFFSET * offset));
+  regval = (*regaddr & ~maskline);
+  *regaddr = regval;
+
+  /* 2] Clear event mode */
+  regaddr = (&EXTI->C2EMR1 + (EXTI_MODE_OFFSET * offset));
+  regval = (*regaddr & ~maskline);
+  *regaddr = regval;
+
+  /* 3] Clear triggers in case of configurable lines */
+  if ((hexti->Line & EXTI_CONFIG) != 0x0u)
+  {
+    regaddr = (&EXTI->RTSR1 + (EXTI_CONFIG_OFFSET * offset));
+    regval = (*regaddr & ~maskline);
+    *regaddr = regval;
+
+    regaddr = (&EXTI->FTSR1 + (EXTI_CONFIG_OFFSET * offset));
+    regval = (*regaddr & ~maskline);
+    *regaddr = regval;
+
+    /* Get Gpio port selection for gpio lines */
+    if ((hexti->Line & EXTI_GPIO) == EXTI_GPIO)
+    {
+      assert_param(IS_EXTI_GPIO_PIN(linepos));
+
+      regval = EXTI->EXTICR[linepos >> 2u];
+      regval &= ~(EXTI_EXTICR1_EXTI0 << (EXTI_EXTICR1_EXTI1_Pos * (linepos & 0x03u)));
+      EXTI->EXTICR[linepos >> 2u] = regval;
+    }
+  }
+
+  return HAL_OK;
+}
+
+
+/**
+  * @brief  Register callback for a dedicaated Exti line.
+  * @param  hexti Exti handle.
+  * @param  CallbackID User callback identifier.
+  *         This parameter can be one of @arg @ref EXTI_CallbackIDTypeDef values.
+  * @param  pPendingCbfn function pointer to be stored as callback.
+  * @retval HAL Status.
+  */
+HAL_StatusTypeDef HAL_EXTI_RegisterCallback(EXTI_HandleTypeDef *hexti, EXTI_CallbackIDTypeDef CallbackID, void (*pPendingCbfn)(void))
+{
+  HAL_StatusTypeDef status = HAL_OK;
+
+  switch (CallbackID)
+  {
+    case  HAL_EXTI_COMMON_CB_ID:
+      hexti->RisingCallback = pPendingCbfn;
+      hexti->FallingCallback = pPendingCbfn;
+      break;
+
+    case  HAL_EXTI_RISING_CB_ID:
+      hexti->RisingCallback = pPendingCbfn;
+      break;
+
+    case  HAL_EXTI_FALLING_CB_ID:
+      hexti->FallingCallback = pPendingCbfn;
+      break;
+
+    default:
+      status = HAL_ERROR;
+      break;
+  }
+
+  return status;
+}
+
+
+/**
+  * @brief  Store line number as handle private field.
+  * @param  hexti Exti handle.
+  * @param  ExtiLine Exti line number.
+  *         This parameter can be from 0 to @ref EXTI_LINE_NB.
+  * @retval HAL Status.
+  */
+HAL_StatusTypeDef HAL_EXTI_GetHandle(EXTI_HandleTypeDef *hexti, uint32_t ExtiLine)
+{
+  /* Check the parameters */
+  assert_param(IS_EXTI_LINE(ExtiLine));
+
+  /* Check null pointer */
+  if (hexti == NULL)
+  {
+    return HAL_ERROR;
+  }
+  else
+  {
+    /* Store line number as handle private field */
+    hexti->Line = ExtiLine;
+
+    return HAL_OK;
+  }
+}
+
+
+/**
+  * @}
+  */
+
+/** @addtogroup EXTI_Exported_Functions_Group2
+ *  @brief EXTI IO functions.
+ *
+@verbatim
+ ===============================================================================
+                       ##### IO operation functions #####
+ ===============================================================================
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Handle EXTI interrupt request.
+  * @param  hexti Exti handle.
+  * @retval none.
+  */
+void HAL_EXTI_IRQHandler(EXTI_HandleTypeDef *hexti)
+{
+  __IO uint32_t *regaddr;
+  uint32_t regval;
+  uint32_t maskline;
+  uint32_t offset;
+
+  /* Compute line register offset and line mask */
+  offset = ((hexti->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT);
+  maskline = (1uL << (hexti->Line & EXTI_PIN_MASK));
+
+  /* Get rising edge pending bit  */
+  regaddr = (&EXTI->RPR1 + (EXTI_CONFIG_OFFSET * offset));
+  regval = (*regaddr & maskline);
+
+  if (regval != 0x0u)
+  {
+    /* Clear pending bit */
+    *regaddr = maskline;
+
+    /* Call rising callback */
+    if (hexti->RisingCallback != NULL)
+    {
+      hexti->RisingCallback();
+    }
+  }
+
+  /* Get falling edge pending bit  */
+  regaddr = (&EXTI->FPR1 + (EXTI_CONFIG_OFFSET * offset));
+  regval = (*regaddr & maskline);
+
+  if (regval != 0x0u)
+  {
+    /* Clear pending bit */
+    *regaddr = maskline;
+
+    /* Call rising callback */
+    if (hexti->FallingCallback != NULL)
+    {
+      hexti->FallingCallback();
+    }
+  }
+}
+
+
+/**
+  * @brief  Get interrupt pending bit of a dedicated line.
+  * @param  hexti Exti handle.
+  * @param  Edge Specify which pending edge as to be checked.
+  *         This parameter can be one of the following values:
+  *           @arg @ref EXTI_TRIGGER_RISING
+  *           @arg @ref EXTI_TRIGGER_FALLING
+  * @retval 1 if interrupt is pending else 0.
+  */
+uint32_t HAL_EXTI_GetPending(EXTI_HandleTypeDef *hexti, uint32_t Edge)
+{
+  __IO uint32_t *regaddr;
+  uint32_t regval;
+  uint32_t linepos;
+  uint32_t maskline;
+  uint32_t offset;
+
+  /* Check parameters */
+  assert_param(IS_EXTI_LINE(hexti->Line));
+  assert_param(IS_EXTI_CONFIG_LINE(hexti->Line));
+  assert_param(IS_EXTI_PENDING_EDGE(Edge));
+
+  /* compute line register offset and line mask */
+  offset = ((hexti->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT);
+  linepos = (hexti->Line & EXTI_PIN_MASK);
+  maskline = (1uL << linepos);
+
+  if (Edge != EXTI_TRIGGER_RISING)
+  {
+    /* Get falling edge pending bit */
+    regaddr = (&EXTI->FPR1 + (EXTI_CONFIG_OFFSET * offset));
+  }
+  else
+  {
+    /* Get rising edge pending bit */
+    regaddr = (&EXTI->RPR1 + (EXTI_CONFIG_OFFSET * offset));
+  }
+
+  /* return 1 if bit is set else 0 */
+  regval = ((*regaddr & maskline) >> linepos);
+  return regval;
+}
+
+
+/**
+  * @brief  Clear interrupt pending bit of a dedicated line.
+  * @param  hexti Exti handle.
+  * @param  Edge Specify which pending edge as to be clear.
+  *         This parameter can be one of the following values:
+  *           @arg @ref EXTI_TRIGGER_RISING
+  *           @arg @ref EXTI_TRIGGER_FALLING
+  * @retval None.
+  */
+void HAL_EXTI_ClearPending(EXTI_HandleTypeDef *hexti, uint32_t Edge)
+{
+  __IO uint32_t *regaddr;
+  uint32_t maskline;
+  uint32_t offset;
+
+  /* Check parameters */
+  assert_param(IS_EXTI_LINE(hexti->Line));
+  assert_param(IS_EXTI_CONFIG_LINE(hexti->Line));
+  assert_param(IS_EXTI_PENDING_EDGE(Edge));
+
+  /* compute line register offset and line mask */
+  offset = ((hexti->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT);
+  maskline = (1uL << (hexti->Line & EXTI_PIN_MASK));
+
+  if (Edge != EXTI_TRIGGER_RISING)
+  {
+    /* Get falling edge pending register address */
+    regaddr = (&EXTI->FPR1 + (EXTI_CONFIG_OFFSET * offset));
+  }
+  else
+  {
+    /* Get falling edge pending register address */
+    regaddr = (&EXTI->RPR1 + (EXTI_CONFIG_OFFSET * offset));
+  }
+
+  /* Clear Pending bit */
+  *regaddr =  maskline;
+}
+
+
+/**
+  * @brief  Generate a software interrupt for a dedicated line.
+  * @param  hexti Exti handle.
+  * @retval None.
+  */
+void HAL_EXTI_GenerateSWI(EXTI_HandleTypeDef *hexti)
+{
+  __IO uint32_t *regaddr;
+  uint32_t maskline;
+  uint32_t offset;
+
+  /* Check parameters */
+  assert_param(IS_EXTI_LINE(hexti->Line));
+  assert_param(IS_EXTI_CONFIG_LINE(hexti->Line));
+
+  /* compute line register offset and line mask */
+  offset = ((hexti->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT);
+  maskline = (1uL << (hexti->Line & EXTI_PIN_MASK));
+
+  regaddr = (&EXTI->SWIER1 + (EXTI_CONFIG_OFFSET * offset));
+  *regaddr = maskline;
+}
+
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* HAL_EXTI_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */

meta-st/meta-st-stm32mp-addons/mx/stm32mp157d-vrpmdv-mon-mx/Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_gpio.c

@@ -0,0 +1,563 @@
+/**
+  ******************************************************************************
+  * @file    stm32mp1xx_hal_gpio.c
+  * @author  MCD Application Team
+  * @brief   GPIO HAL module driver.
+  *          This file provides firmware functions to manage the following
+  *          functionalities of the General Purpose Input/Output (GPIO) peripheral:
+  *           + Initialization and de-initialization functions
+  *           + IO operation functions
+  *
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  @verbatim
+  ==============================================================================
+                    ##### GPIO Peripheral features #####
+  ==============================================================================
+  [..]
+  Subject to the specific hardware characteristics of each I/O port listed in the datasheet, each
+  port bit of the General Purpose IO (GPIO) Ports, can be individually configured by software
+  in several modes:
+  (+) Input mode
+  (+) Analog mode
+  (+) Output mode
+  (+) Alternate function mode
+  (+) External interrupt/event lines
+
+  [..]
+  During and just after reset, the alternate functions and external interrupt
+        lines are not active and the I/O ports are configured in input floating mode.
+     
+    (+) All GPIO pins have weak internal pull-up and pull-down resistors, which can be 
+        activated or not.
+
+  [..]
+  In Output or Alternate mode, each IO can be configured on open-drain or push-pull
+        type and the IO speed can be selected depending on the VDD value.
+
+  [..]
+  All ports have external interrupt/event capability. To use external interrupt
+        lines, the port must be configured in input mode. All available GPIO pins are
+        connected to the 16 external interrupt/event lines from EXTI0 to EXTI15.
+
+  [..]
+  The external interrupt/event controller consists of up to 23 edge detectors
+        (16 lines are connected to GPIO) for generating event/interrupt requests (each
+        input line can be independently configured to select the type (interrupt or event)
+        and the corresponding trigger event (rising or falling or both). Each line can
+        also be masked independently.
+
+                     ##### How to use this driver #####
+  ==============================================================================
+  [..]
+    (#) Enable the GPIO AHB clock using the following function: __HAL_RCC_GPIOx_CLK_ENABLE().
+
+    (#) Configure the GPIO pin(s) using HAL_GPIO_Init().
+        (++) Configure the IO mode using "Mode" member from GPIO_InitTypeDef structure
+        (++) Activate Pull-up, Pull-down resistor using "Pull" member from GPIO_InitTypeDef
+             structure.
+        (++) In case of Output or alternate function mode selection: the speed is
+             configured through "Speed" member from GPIO_InitTypeDef structure.
+        (++) In alternate mode is selection, the alternate function connected to the IO
+             is configured through "Alternate" member from GPIO_InitTypeDef structure.
+        (++) Analog mode is required when a pin is to be used as ADC channel
+             or DAC output.
+        (++) In case of external interrupt/event selection the "Mode" member from
+             GPIO_InitTypeDef structure select the type (interrupt or event) and
+             the corresponding trigger event (rising or falling or both).
+
+    (#) In case of external interrupt/event mode selection, configure NVIC IRQ priority
+        mapped to the EXTI line using HAL_NVIC_SetPriority() and enable it using
+        HAL_NVIC_EnableIRQ().
+
+    (#) To get the level of a pin configured in input mode use HAL_GPIO_ReadPin().
+
+    (#) To set/reset the level of a pin configured in output mode use
+        HAL_GPIO_WritePin()/HAL_GPIO_TogglePin().
+
+   (#) To lock pin configuration until next reset use HAL_GPIO_LockPin().
+
+
+    (#) During and just after reset, the alternate functions are not
+        active and the GPIO pins are configured in input floating mode (except JTAG
+        pins).
+
+    (#) The LSE oscillator pins OSC32_IN and OSC32_OUT can be used as general purpose
+        (PC14 and PC15, respectively) when the LSE oscillator is off. The LSE has
+        priority over the GPIO function.
+
+    (#) The HSE oscillator pins OSC_IN/OSC_OUT can be used as
+        general purpose PH0 and PH1, respectively, when the HSE oscillator is off.
+        The HSE has priority over the GPIO function.
+
+  @endverbatim
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32mp1xx_hal.h"
+
+/** @addtogroup STM32MP1xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup GPIO GPIO
+  * @brief GPIO HAL module driver
+  * @{
+  */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private defines ------------------------------------------------------------*/
+/** @addtogroup GPIO_Private_Constants GPIO Private Constants
+  * @{
+  */
+#define GPIO_MODE             ((uint32_t)0x00000003)
+#define EXTI_MODE             ((uint32_t)0x10000000)
+#define GPIO_MODE_IT          ((uint32_t)0x00010000)
+#define GPIO_MODE_EVT         ((uint32_t)0x00020000)
+#define RISING_EDGE           ((uint32_t)0x00100000)
+#define FALLING_EDGE          ((uint32_t)0x00200000)
+#define GPIO_OUTPUT_TYPE      ((uint32_t)0x00000010)
+
+#define GPIO_NUMBER           ((uint32_t)16)
+/**
+  * @}
+  */
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup GPIO_Exported_Functions GPIO Exported Functions
+  * @{
+  */
+
+/** @defgroup GPIO_Exported_Functions_Group1 Initialization and de-initialization functions
+ *  @brief    Initialization and Configuration functions
+ *
+@verbatim
+ ===============================================================================
+              ##### Initialization and de-initialization functions #####
+ ===============================================================================
+  [..]
+    This section provides functions allowing to initialize and de-initialize the GPIOs
+    to be ready for use.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the GPIOx peripheral according to the specified parameters in the GPIO_Init.
+  * @param  GPIOx: where x can be (A..K) to select the GPIO peripheral.
+  * @param  GPIO_Init: pointer to a GPIO_InitTypeDef structure that contains
+  *         the configuration information for the specified GPIO peripheral.
+  * @retval None
+  */
+void HAL_GPIO_Init(GPIO_TypeDef  *GPIOx, GPIO_InitTypeDef *GPIO_Init)
+{
+  uint32_t position;
+  uint32_t ioposition;
+  uint32_t iocurrent;
+  uint32_t temp;
+  EXTI_Core_TypeDef * EXTI_CurrentCPU;
+
+#if defined(CORE_CM4)
+  EXTI_CurrentCPU = EXTI_C2; /* EXTI for CM4 CPU */
+#else
+  EXTI_CurrentCPU = EXTI_C1; /* EXTI for CA7 CPU */
+#endif
+
+  /* Check the parameters */
+  assert_param(IS_GPIO_ALL_INSTANCE(GPIOx));
+  assert_param(IS_GPIO_PIN(GPIO_Init->Pin));
+  assert_param(IS_GPIO_MODE(GPIO_Init->Mode));
+  assert_param(IS_GPIO_PULL(GPIO_Init->Pull));
+
+  /* Configure the port pins */
+  for(position = 0; position < GPIO_NUMBER; position++)
+  {
+    /* Get the IO position */
+    ioposition = ((uint32_t)0x01) << position;
+    /* Get the current IO position */
+    iocurrent = (uint32_t)(GPIO_Init->Pin) & ioposition;
+
+    if(iocurrent == ioposition)
+    {
+      /*--------------------- GPIO Mode Configuration ------------------------*/
+      /* In case of Alternate function mode selection */
+      if((GPIO_Init->Mode == GPIO_MODE_AF_PP) || (GPIO_Init->Mode == GPIO_MODE_AF_OD))
+      {
+        /* Check the Alternate function parameter */
+        assert_param(IS_GPIO_AF(GPIO_Init->Alternate));
+
+        /* Configure Alternate function mapped with the current IO */
+        temp = GPIOx->AFR[position >> 3];
+        temp &= ~((uint32_t)0xF << ((uint32_t)(position & (uint32_t)0x07) * 4)) ;
+        temp |= ((uint32_t)(GPIO_Init->Alternate) << (((uint32_t)position & (uint32_t)0x07) * 4));
+        GPIOx->AFR[position >> 3] = temp;
+      }
+
+      /* Configure IO Direction mode (Input, Output, Alternate or Analog) */
+      temp = GPIOx->MODER;
+      temp &= ~(GPIO_MODER_MODER0 << (position * 2));
+      temp |= ((GPIO_Init->Mode & GPIO_MODE) << (position * 2));
+      GPIOx->MODER = temp;
+
+      /* In case of Output or Alternate function mode selection */
+      if((GPIO_Init->Mode == GPIO_MODE_OUTPUT_PP) || (GPIO_Init->Mode == GPIO_MODE_AF_PP) ||
+         (GPIO_Init->Mode == GPIO_MODE_OUTPUT_OD) || (GPIO_Init->Mode == GPIO_MODE_AF_OD))
+      {
+        /* Check the Speed parameter */
+        assert_param(IS_GPIO_SPEED(GPIO_Init->Speed));
+        /* Configure the IO Speed */
+        temp = GPIOx->OSPEEDR;
+        temp &= ~(GPIO_OSPEEDR_OSPEEDR0 << (position * 2));
+        temp |= (GPIO_Init->Speed << (position * 2));
+        GPIOx->OSPEEDR = temp;
+
+        /* Configure the IO Output Type */
+        temp = GPIOx->OTYPER;
+        temp &= ~(GPIO_OTYPER_OT0 << position) ;
+        temp |= (((GPIO_Init->Mode & GPIO_OUTPUT_TYPE) >> 4) << position);
+        GPIOx->OTYPER = temp;
+      }
+
+      /* Activate the Pull-up or Pull down resistor for the current IO */
+      temp = GPIOx->PUPDR;
+      temp &= ~(GPIO_PUPDR_PUPDR0 << (position * 2));
+      temp |= ((GPIO_Init->Pull) << (position * 2));
+      GPIOx->PUPDR = temp;
+
+      /*--------------------- EXTI Mode Configuration ------------------------*/
+      /* Configure the External Interrupt or event for the current IO */
+      if((GPIO_Init->Mode & EXTI_MODE) == EXTI_MODE)
+      {
+        temp = EXTI->EXTICR[position >> 2U];
+        temp &= ~(0xFFU << (8U * (position & 0x03U)));
+        temp |= (GPIO_GET_INDEX(GPIOx) << (8U * (position & 0x03U)));
+        EXTI->EXTICR[position >> 2U] = temp;
+
+        /* Clear EXTI line configuration */
+        temp = EXTI_CurrentCPU->IMR1;
+        temp &= ~((uint32_t)iocurrent);
+        if((GPIO_Init->Mode & GPIO_MODE_IT) == GPIO_MODE_IT)
+        {
+          temp |= iocurrent;
+        }
+        EXTI_CurrentCPU->IMR1 = temp;
+
+        temp = EXTI_CurrentCPU->EMR1;
+        temp &= ~((uint32_t)iocurrent);
+        if((GPIO_Init->Mode & GPIO_MODE_EVT) == GPIO_MODE_EVT)
+        {
+          temp |= iocurrent;
+        }
+        EXTI_CurrentCPU->EMR1 = temp;
+
+        /* Clear Rising Falling edge configuration */
+        temp = EXTI->RTSR1;
+        temp &= ~((uint32_t)iocurrent);
+        if((GPIO_Init->Mode & RISING_EDGE) == RISING_EDGE)
+        {
+          temp |= iocurrent;
+        }
+        EXTI->RTSR1 = temp;
+
+        temp = EXTI->FTSR1;
+        temp &= ~((uint32_t)iocurrent);
+        if((GPIO_Init->Mode & FALLING_EDGE) == FALLING_EDGE)
+        {
+          temp |= iocurrent;
+        }
+        EXTI->FTSR1 = temp;
+      }
+    }
+  }
+}
+
+/**
+  * @brief  De-initializes the GPIOx peripheral registers to their default reset values.
+  * @param  GPIOx: where x can be (A..Z) to select the GPIO peripheral.
+  * @param  GPIO_Pin: specifies the port bit to be written.
+  *          This parameter can be one of GPIO_PIN_x where x can be (0..15).
+  * @retval None
+  */
+void HAL_GPIO_DeInit(GPIO_TypeDef  *GPIOx, uint32_t GPIO_Pin)
+{
+  uint32_t position;
+  uint32_t ioposition;
+  uint32_t iocurrent;
+  uint32_t tmp;
+  EXTI_Core_TypeDef * EXTI_CurrentCPU;
+
+#if defined(CORE_CM4)
+  EXTI_CurrentCPU = EXTI_C2; /* EXTI for CM4 CPU */
+#else
+  EXTI_CurrentCPU = EXTI_C1; /* EXTI for CA7 CPU */
+#endif
+
+  /* Check the parameters */
+  assert_param(IS_GPIO_ALL_INSTANCE(GPIOx));
+
+  /* Configure the port pins */
+  for(position = 0; position < GPIO_NUMBER; position++)
+  {
+    /* Get the IO position */
+    ioposition = ((uint32_t)0x01) << position;
+    /* Get the current IO position */
+    iocurrent = (GPIO_Pin) & ioposition;
+
+    if(iocurrent == ioposition)
+    {
+      /*------------------------- EXTI Mode Configuration --------------------*/
+      tmp = EXTI->EXTICR[position >> 2];
+      tmp &= (((uint32_t)0xFF) << (8 * (position & 0x03)));
+      if(tmp == ((uint32_t)(GPIO_GET_INDEX(GPIOx)) << (8 * (position & 0x03))))
+      {
+        /* Clear EXTI line configuration for Current CPU */
+        EXTI_CurrentCPU->IMR1 &= ~((uint32_t)iocurrent);
+        EXTI_CurrentCPU->EMR1 &= ~((uint32_t)iocurrent);
+
+        /* Clear Rising Falling edge configuration */
+        EXTI->RTSR1 &= ~((uint32_t)iocurrent);
+        EXTI->FTSR1 &= ~((uint32_t)iocurrent);
+		
+        /* Configure the External Interrupt or event for the current IO */
+        tmp = ((uint32_t)0xFF) << (8 * (position & 0x03));
+        EXTI->EXTICR[position >> 2] &= ~tmp;
+      }
+
+      /*------------------------- GPIO Mode Configuration --------------------*/
+      /* Configure IO in Analog Mode */
+      GPIOx->MODER |= (GPIO_MODER_MODER0 << (position * 2));
+
+      /* Configure the default Alternate Function in current IO */
+      GPIOx->AFR[position >> 3] &= ~((uint32_t)0xF << ((uint32_t)(position & (uint32_t)0x07) * 4)) ;
+
+      /* Configure the default value for IO Speed */
+      GPIOx->OSPEEDR &= ~(GPIO_OSPEEDR_OSPEEDR0 << (position * 2));
+
+      /* Configure the default value IO Output Type */
+      GPIOx->OTYPER  &= ~(GPIO_OTYPER_OT0 << position) ;
+
+      /* Deactivate the Pull-up and Pull-down resistor for the current IO */
+      GPIOx->PUPDR &= ~(GPIO_PUPDR_PUPDR0 << (position * 2));
+    }
+  }
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup GPIO_Exported_Functions_Group2 IO operation functions
+ *  @brief GPIO Read, Write, Toggle, Lock and EXTI management functions.
+ *
+@verbatim
+ ===============================================================================
+                       ##### IO operation functions #####
+ ===============================================================================
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Reads the specified input port pin.
+  * @param  GPIOx: where x can be (A..K) to select the GPIO peripheral.
+  * @param  GPIO_Pin: specifies the port bit to read.
+  *         This parameter can be GPIO_PIN_x where x can be (0..15).
+  * @retval The input port pin value.
+  */
+GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
+{
+  GPIO_PinState bitstatus;
+
+  /* Check the parameters */
+  assert_param(IS_GPIO_PIN(GPIO_Pin));
+
+  if((GPIOx->IDR & GPIO_Pin) != (uint32_t)GPIO_PIN_RESET)
+  {
+    bitstatus = GPIO_PIN_SET;
+  }
+  else
+  {
+    bitstatus = GPIO_PIN_RESET;
+  }
+  return bitstatus;
+}
+
+/**
+  * @brief  Sets or clears the selected data port bit.
+  *
+  * @note   This function uses GPIOx_BSRR register to allow atomic read/modify
+  *         accesses. In this way, there is no risk of an IRQ occurring between
+  *         the read and the modify access.
+  *
+  * @param  GPIOx: where x can be (A..K) to select the GPIO peripheral.
+  * @param  GPIO_Pin: specifies the port bit to be written.
+  *          This parameter can be one of GPIO_PIN_x where x can be (0..15).
+  * @param  PinState: specifies the value to be written to the selected bit.
+  *          This parameter can be one of the GPIO_PinState enum values:
+  *            @arg GPIO_PIN_RESET: to clear the port pin
+  *            @arg GPIO_PIN_SET: to set the port pin
+  * @retval None
+  */
+void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState)
+{
+  /* Check the parameters */
+  assert_param(IS_GPIO_PIN(GPIO_Pin));
+  assert_param(IS_GPIO_PIN_ACTION(PinState));
+
+  if (PinState != GPIO_PIN_RESET)
+  {
+    GPIOx->BSRR = GPIO_Pin;
+  }
+  else
+  {
+    GPIOx->BSRR = (uint32_t)GPIO_Pin << GPIO_NUMBER;
+  }
+}
+
+/**
+  * @brief  Toggles the specified GPIO pins.
+  * @param  GPIOx: Where x can be (A..K) to select the GPIO peripheral.
+  * @param  GPIO_Pin: Specifies the pins to be toggled.
+  * @retval None
+  */
+void HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
+{
+  /* Check the parameters */
+  assert_param(IS_GPIO_PIN(GPIO_Pin));
+
+  if ((GPIOx->ODR & GPIO_Pin) != 0x00u)
+  {
+    GPIOx->BRR = (uint32_t)GPIO_Pin;
+  }
+  else
+  {
+    GPIOx->BSRR = (uint32_t)GPIO_Pin;
+  }
+}
+
+/**
+  * @brief  Locks GPIO Pins configuration registers.
+  * @note   The locked registers are GPIOx_MODER, GPIOx_OTYPER, GPIOx_OSPEEDR,
+  *         GPIOx_PUPDR, GPIOx_AFRL and GPIOx_AFRH.
+  * @note   The configuration of the locked GPIO pins can no longer be modified
+  *         until the next reset.
+  * @param  GPIOx: where x can be (A..K) to select the GPIO peripheral
+  * @param  GPIO_Pin: specifies the port bit to be locked.
+  *         This parameter can be any combination of GPIO_PIN_x where x can be (0..15).
+  * @retval None
+  */
+HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
+{
+  __IO uint32_t tmp = GPIO_LCKR_LCKK;
+
+  /* Check the parameters */
+  assert_param(IS_GPIO_LOCK_INSTANCE(GPIOx));
+  assert_param(IS_GPIO_PIN(GPIO_Pin));
+
+  /* Apply lock key write sequence */
+  tmp |= GPIO_Pin;
+  /* Set LCKx bit(s): LCKK='1' + LCK[15-0] */
+  GPIOx->LCKR = tmp;
+  /* Reset LCKx bit(s): LCKK='0' + LCK[15-0] */
+  GPIOx->LCKR = GPIO_Pin;
+  /* Set LCKx bit(s): LCKK='1' + LCK[15-0] */
+  GPIOx->LCKR = tmp;
+  /* Read LCKK register. This read is mandatory to complete key lock sequence */
+  tmp = GPIOx->LCKR;
+
+  /* Read again in order to confirm lock is active */
+  if((GPIOx->LCKR & GPIO_LCKR_LCKK) != RESET)
+  {
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_ERROR;
+  }
+}
+
+/**
+  * @brief  Handle EXTI interrupt request.
+  * @param  GPIO_Pin Specifies the port pin connected to corresponding EXTI line.
+  * @retval None
+  */
+void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin)
+{
+  /* EXTI line interrupt detected */
+  if (__HAL_GPIO_EXTI_GET_RISING_IT(GPIO_Pin) != RESET)
+  {
+    __HAL_GPIO_EXTI_CLEAR_RISING_IT(GPIO_Pin);
+    HAL_GPIO_EXTI_Rising_Callback(GPIO_Pin);
+  }
+
+  if (__HAL_GPIO_EXTI_GET_FALLING_IT(GPIO_Pin) != RESET)
+  {
+    __HAL_GPIO_EXTI_CLEAR_FALLING_IT(GPIO_Pin);
+    HAL_GPIO_EXTI_Falling_Callback(GPIO_Pin);
+  }
+}
+
+/**
+  * @brief  EXTI line detection callback.
+  * @param  GPIO_Pin Specifies the port pin connected to corresponding EXTI line.
+  * @retval None
+  */
+__weak void HAL_GPIO_EXTI_Rising_Callback(uint16_t GPIO_Pin)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(GPIO_Pin);
+
+  /* NOTE: This function should not be modified, when the callback is needed,
+           the HAL_GPIO_EXTI_Rising_Callback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  EXTI line detection callback.
+  * @param  GPIO_Pin Specifies the port pin connected to corresponding EXTI line.
+  * @retval None
+  */
+__weak void HAL_GPIO_EXTI_Falling_Callback(uint16_t GPIO_Pin)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(GPIO_Pin);
+
+  /* NOTE: This function should not be modified, when the callback is needed,
+           the HAL_GPIO_EXTI_Falling_Callback could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+
+/**
+  * @}
+  */
+
+#endif /* HAL_GPIO_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */

meta-st/meta-st-stm32mp-addons/mx/stm32mp157d-vrpmdv-mon-mx/Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_hsem.c

@@ -0,0 +1,435 @@
+/**
+  ******************************************************************************
+  * @file    stm32mp1xx_hal_hsem.c
+  * @author  MCD Application Team
+  * @brief   HSEM HAL module driver.
+  *          This file provides firmware functions to manage the following
+  *          functionalities of the semaphore peripheral:
+  *           + Semaphore Take function (2-Step Procedure) , non blocking
+  *           + Semaphore FastTake function (1-Step Procedure) , non blocking
+  *           + Semaphore Status check
+  *           + Semaphore Clear Key Set and Get
+  *           + Release and release all functions
+  *           + Semaphore notification enabling and disabling and callnack functions
+  *           + IRQ handler management
+  *
+  *
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  @verbatim
+  ==============================================================================
+                     ##### How to use this driver #####
+  ==============================================================================
+  [..]
+      (#)Take a semaphore In 2-Step mode Using function HAL_HSEM_Take. This function takes as parameters :
+           (++) the semaphore ID from 0 to 31
+           (++) the process ID from 0 to 255
+      (#) Fast Take semaphore In 1-Step mode Using function HAL_HSEM_FastTake. This function takes as parameter :
+           (++) the semaphore ID from 0_ID to 31. Note that the process ID value is implicitly assumed as zero
+      (#) Check if a semaphore is Taken using function HAL_HSEM_IsSemTaken. This function takes as parameter :
+          (++) the semaphore ID from 0_ID to 31
+          (++) It returns 1 if the given semaphore is taken otherwise (Free) zero
+      (#)Release a semaphore using function with HAL_HSEM_Release. This function takes as parameters :
+           (++) the semaphore ID from 0 to 31
+           (++) the process ID from 0 to 255:
+           (++) Note: If ProcessID and MasterID match, semaphore is freed, and an interrupt
+         may be generated when enabled (notification activated). If ProcessID or MasterID does not match,
+         semaphore remains taken (locked)
+
+      (#)Release all semaphores at once taken by a given Master using function HAL_HSEM_Release_All
+          This function takes as parameters :
+           (++) the Release Key (value from 0 to 0xFFFF) can be Set or Get respectively by
+              HAL_HSEM_SetClearKey() or HAL_HSEM_GetClearKey functions
+           (++) the Master ID:
+           (++) Note: If the Key and MasterID match, all semaphores taken by the given CPU that corresponds
+           to MasterID  will be freed, and an interrupt may be generated when enabled (notification activated). If the
+           Key or the MasterID doesn't match, semaphores remains taken (locked)
+
+      (#)Semaphores Release all key functions:
+         (++)  HAL_HSEM_SetClearKey() to set semaphore release all Key
+         (++)  HAL_HSEM_GetClearKey() to get release all Key
+      (#)Semaphores notification functions :
+         (++)  HAL_HSEM_ActivateNotification to activate a notification callback on
+               a given semaphores Mask (bitfield). When one or more semaphores defined by the mask are released
+               the callback HAL_HSEM_FreeCallback will be asserted giving as parameters a mask of the released
+               semaphores (bitfield).
+
+         (++)  HAL_HSEM_DeactivateNotification to deactivate the notification of a given semaphores Mask (bitfield).
+         (++) See the description of the macro __HAL_HSEM_SEMID_TO_MASK to check how to calculate a semaphore mask
+                Used by the notification functions
+     *** HSEM HAL driver macros list ***
+     =============================================
+     [..] Below the list of most used macros in HSEM HAL driver.
+
+      (+) __HAL_HSEM_SEMID_TO_MASK: Helper macro to convert a Semaphore ID to a Mask.
+      [..] Example of use :
+      [..] mask = __HAL_HSEM_SEMID_TO_MASK(8)  |  __HAL_HSEM_SEMID_TO_MASK(21) | __HAL_HSEM_SEMID_TO_MASK(25).
+      [..] All next macros take as parameter a semaphore Mask (bitfiled) that can be constructed using  __HAL_HSEM_SEMID_TO_MASK as the above example.
+      (+) __HAL_HSEM_ENABLE_IT: Enable the specified semaphores Mask interrupts.
+      (+) __HAL_HSEM_DISABLE_IT: Disable the specified semaphores Mask interrupts.
+      (+) __HAL_HSEM_GET_IT: Checks whether the specified semaphore interrupt has occurred or not.
+      (+) __HAL_HSEM_GET_FLAG: Get the semaphores status release flags.
+      (+) __HAL_HSEM_CLEAR_FLAG: Clear the semaphores status release flags.
+
+  @endverbatim
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32mp1xx_hal.h"
+
+/** @addtogroup STM32MP1xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup HSEM HSEM
+  * @brief HSEM HAL module driver
+  * @{
+  */
+
+#ifdef HAL_HSEM_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+#if defined(DUAL_CORE)
+#ifndef HSEM_R_MASTERID
+#define HSEM_R_MASTERID HSEM_R_COREID
+#endif
+
+#ifndef HSEM_RLR_MASTERID
+#define HSEM_RLR_MASTERID HSEM_RLR_COREID
+#endif
+
+#ifndef HSEM_CR_MASTERID
+#define HSEM_CR_MASTERID HSEM_CR_COREID
+#endif
+#endif /* DUAL_CORE */
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup HSEM_Exported_Functions  HSEM Exported Functions
+  * @{
+  */
+
+/** @defgroup HSEM_Exported_Functions_Group1 Take and Release functions
+  *  @brief    HSEM Take and Release functions
+  *
+@verbatim
+ ==============================================================================
+              ##### HSEM Take and Release functions #####
+ ==============================================================================
+[..] This section provides functions allowing to:
+      (+) Take a semaphore with 2 Step method
+      (+) Fast Take a semaphore with 1 Step method
+      (+) Check semaphore state Taken or not
+      (+) Release a semaphore
+      (+) Release all semaphore at once
+
+@endverbatim
+  * @{
+  */
+
+
+/**
+  * @brief  Take a semaphore in 2 Step mode.
+  * @param  SemID: semaphore ID from 0 to 31
+  * @param  ProcessID: Process ID from 0 to 255
+  * @retval HAL status
+  */
+HAL_StatusTypeDef  HAL_HSEM_Take(uint32_t SemID, uint32_t ProcessID)
+{
+  /* Check the parameters */
+  assert_param(IS_HSEM_SEMID(SemID));
+  assert_param(IS_HSEM_PROCESSID(ProcessID));
+
+#if  USE_MULTI_CORE_SHARED_CODE != 0U
+  /* First step  write R register with MasterID, processID and take bit=1*/
+  HSEM->R[SemID] = ((ProcessID & HSEM_R_PROCID) | ((HAL_GetCurrentCPUID() << POSITION_VAL(HSEM_R_MASTERID)) & HSEM_R_MASTERID) | HSEM_R_LOCK);
+
+  /* second step : read the R register . Take achieved if MasterID and processID match and take bit set to 1 */
+  if (HSEM->R[SemID] == ((ProcessID & HSEM_R_PROCID) | ((HAL_GetCurrentCPUID() << POSITION_VAL(HSEM_R_MASTERID)) & HSEM_R_MASTERID) | HSEM_R_LOCK))
+  {
+    /*take success when MasterID and ProcessID match and take bit set*/
+    return HAL_OK;
+  }
+#else
+  /* First step  write R register with MasterID, processID and take bit=1*/
+  HSEM->R[SemID] = (ProcessID | HSEM_CR_COREID_CURRENT | HSEM_R_LOCK);
+
+  /* second step : read the R register . Take achieved if MasterID and processID match and take bit set to 1 */
+  if (HSEM->R[SemID] == (ProcessID | HSEM_CR_COREID_CURRENT | HSEM_R_LOCK))
+  {
+    /*take success when MasterID and ProcessID match and take bit set*/
+    return HAL_OK;
+  }
+#endif
+
+  /* Semaphore take fails*/
+  return HAL_ERROR;
+}
+
+/**
+  * @brief  Fast Take a semaphore with 1 Step mode.
+  * @param  SemID: semaphore ID from 0 to 31
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_HSEM_FastTake(uint32_t SemID)
+{
+  /* Check the parameters */
+  assert_param(IS_HSEM_SEMID(SemID));
+
+#if  USE_MULTI_CORE_SHARED_CODE != 0U
+  /* Read the RLR register to take the semaphore */
+  if (HSEM->RLR[SemID] == (((HAL_GetCurrentCPUID() << POSITION_VAL(HSEM_R_MASTERID)) & HSEM_RLR_MASTERID) | HSEM_RLR_LOCK))
+  {
+    /*take success when MasterID match and take bit set*/
+    return HAL_OK;
+  }
+#else
+  /* Read the RLR register to take the semaphore */
+  if (HSEM->RLR[SemID] == (HSEM_CR_COREID_CURRENT | HSEM_RLR_LOCK))
+  {
+    /*take success when MasterID match and take bit set*/
+    return HAL_OK;
+  }
+#endif
+
+  /* Semaphore take fails */
+  return HAL_ERROR;
+}
+/**
+  * @brief  Check semaphore state Taken or not.
+  * @param  SemID: semaphore ID
+  * @retval HAL HSEM state
+  */
+uint32_t HAL_HSEM_IsSemTaken(uint32_t SemID)
+{
+  return (((HSEM->R[SemID] & HSEM_R_LOCK) != 0U) ? 1UL : 0UL);
+}
+
+
+/**
+  * @brief  Release a semaphore.
+  * @param  SemID: semaphore ID from 0 to 31
+  * @param  ProcessID: Process ID from 0 to 255
+  * @retval None
+  */
+void  HAL_HSEM_Release(uint32_t SemID, uint32_t ProcessID)
+{
+  /* Check the parameters */
+  assert_param(IS_HSEM_SEMID(SemID));
+  assert_param(IS_HSEM_PROCESSID(ProcessID));
+
+  /* Clear the semaphore by writing to the R register : the MasterID , the processID and take bit = 0  */
+  HSEM->R[SemID] = (ProcessID | HSEM_CR_COREID_CURRENT);
+
+}
+
+/**
+  * @brief  Release All semaphore used by a given Master .
+  * @param  Key: Semaphore Key , value from 0 to 0xFFFF
+  * @param  CoreID: CoreID of the CPU that is using semaphores to be released
+  * @retval None
+  */
+void HAL_HSEM_ReleaseAll(uint32_t Key, uint32_t CoreID)
+{
+  assert_param(IS_HSEM_KEY(Key));
+  assert_param(IS_HSEM_COREID(CoreID));
+
+  HSEM->CR = ((Key << HSEM_CR_KEY_Pos) | (CoreID << HSEM_CR_COREID_Pos));
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup HSEM_Exported_Functions_Group2 HSEM Set and Get Key functions
+  *  @brief    HSEM Set and Get Key functions.
+  *
+@verbatim
+  ==============================================================================
+              ##### HSEM Set and Get Key functions #####
+  ==============================================================================
+    [..]  This section provides functions allowing to:
+      (+) Set semaphore Key
+      (+) Get semaphore Key
+@endverbatim
+
+  * @{
+  */
+
+/**
+  * @brief  Set semaphore Key .
+  * @param  Key: Semaphore Key , value from 0 to 0xFFFF
+  * @retval None
+  */
+void  HAL_HSEM_SetClearKey(uint32_t Key)
+{
+  assert_param(IS_HSEM_KEY(Key));
+
+  MODIFY_REG(HSEM->KEYR, HSEM_KEYR_KEY, (Key << HSEM_KEYR_KEY_Pos));
+
+}
+
+/**
+  * @brief  Get semaphore Key .
+  * @retval Semaphore Key , value from 0 to 0xFFFF
+  */
+uint32_t HAL_HSEM_GetClearKey(void)
+{
+  return (HSEM->KEYR >> HSEM_KEYR_KEY_Pos);
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup HSEM_Exported_Functions_Group3 HSEM IRQ handler management
+  *  @brief    HSEM Notification functions.
+  *
+@verbatim
+  ==============================================================================
+      ##### HSEM IRQ handler management and Notification functions #####
+  ==============================================================================
+[..]  This section provides HSEM IRQ handler and Notification function.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Activate Semaphore release Notification for a given Semaphores Mask .
+  * @param  SemMask: Mask of Released semaphores
+  * @retval Semaphore Key
+  */
+void HAL_HSEM_ActivateNotification(uint32_t SemMask)
+{
+#if  USE_MULTI_CORE_SHARED_CODE != 0U
+  /*enable the semaphore mask interrupts */
+  if (HAL_GetCurrentCPUID() == HSEM_CPU1_COREID)
+  {
+    /*Use interrupt line 0 for CPU1 Master */
+    HSEM->C1IER |= SemMask;
+  }
+  else /* HSEM_CPU2_COREID */
+  {
+    /*Use interrupt line 1 for CPU2 Master*/
+    HSEM->C2IER |= SemMask;
+  }
+#else
+  HSEM_COMMON->IER |= SemMask;
+#endif
+}
+
+/**
+  * @brief  Deactivate Semaphore release Notification for a given Semaphores Mask .
+  * @param  SemMask: Mask of Released semaphores
+  * @retval Semaphore Key
+  */
+void HAL_HSEM_DeactivateNotification(uint32_t SemMask)
+{
+#if  USE_MULTI_CORE_SHARED_CODE != 0U
+  /*enable the semaphore mask interrupts */
+  if (HAL_GetCurrentCPUID() == HSEM_CPU1_COREID)
+  {
+    /*Use interrupt line 0 for CPU1 Master */
+    HSEM->C1IER &= ~SemMask;
+  }
+  else /* HSEM_CPU2_COREID */
+  {
+    /*Use interrupt line 1 for CPU2 Master*/
+    HSEM->C2IER &= ~SemMask;
+  }
+#else
+  HSEM_COMMON->IER &= ~SemMask;
+#endif
+}
+
+/**
+  * @brief  This function handles HSEM interrupt request
+  * @retval None
+  */
+void HAL_HSEM_IRQHandler(void)
+{
+  uint32_t statusreg;
+#if  USE_MULTI_CORE_SHARED_CODE != 0U
+  if (HAL_GetCurrentCPUID() == HSEM_CPU1_COREID)
+  {
+    /* Get the list of masked freed semaphores*/
+    statusreg = HSEM->C1MISR; /*Use interrupt line 0 for CPU1 Master*/
+
+    /*Disable Interrupts*/
+    HSEM->C1IER &= ~((uint32_t)statusreg);
+
+    /*Clear Flags*/
+    HSEM->C1ICR = ((uint32_t)statusreg);
+  }
+  else /* HSEM_CPU2_COREID */
+  {
+    /* Get the list of masked freed semaphores*/
+    statusreg = HSEM->C2MISR;/*Use interrupt line 1 for CPU2 Master*/
+
+    /*Disable Interrupts*/
+    HSEM->C2IER &= ~((uint32_t)statusreg);
+
+    /*Clear Flags*/
+    HSEM->C2ICR = ((uint32_t)statusreg);
+  }
+#else
+  /* Get the list of masked freed semaphores*/
+  statusreg = HSEM_COMMON->MISR;
+
+  /*Disable Interrupts*/
+  HSEM_COMMON->IER &= ~((uint32_t)statusreg);
+
+  /*Clear Flags*/
+  HSEM_COMMON->ICR = ((uint32_t)statusreg);
+
+#endif
+  /* Call FreeCallback */
+  HAL_HSEM_FreeCallback(statusreg);
+}
+
+/**
+  * @brief Semaphore Released Callback.
+  * @param SemMask: Mask of Released semaphores
+  * @retval None
+  */
+__weak void HAL_HSEM_FreeCallback(uint32_t SemMask)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(SemMask);
+
+  /* NOTE : This function should not be modified, when the callback is needed,
+  the HAL_HSEM_FreeCallback can be implemented in the user file
+    */
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* HAL_HSEM_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */

meta-st/meta-st-stm32mp-addons/mx/stm32mp157d-vrpmdv-mon-mx/Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_ipcc.c

@@ -0,0 +1,778 @@
+/**
+  ******************************************************************************
+  * @file    stm32mp1xx_hal_ipcc.c
+  * @author  MCD Application Team
+  * @brief   IPCC HAL module driver.
+  *          This file provides firmware functions to manage the following
+  *          functionalities of the Inter-Processor communication controller
+  *          peripherals (IPCC).
+  *           + Initialization and de-initialization functions
+  *           + Configuration, notification and interrupts handling
+  *           + Peripheral State and Error functions
+  @verbatim
+  ==============================================================================
+                        ##### How to use this driver #####
+  ==============================================================================
+    [..]
+      The IPCC HAL driver can be used as follows:
+
+      (#) Declare a IPCC_HandleTypeDef handle structure, for example: IPCC_HandleTypeDef hipcc;
+      (#) Initialize the IPCC low level resources by implementing the HAL_IPCC_MspInit() API:
+        (##) Enable the IPCC interface clock
+        (##) NVIC configuration if you need to use interrupt process
+            (+++) Configure the IPCC interrupt priority
+            (+++) Enable the NVIC IPCC IRQ
+
+      (#) Initialize the IPCC registers by calling the HAL_IPCC_Init() API which trig
+          HAL_IPCC_MspInit().
+
+      (#) Implement the interrupt callbacks for transmission and reception to use the driver in interrupt mode
+
+      (#) Associate those callback to the corresponding channel and direction using HAL_IPCC_ConfigChannel().
+          This is the interrupt mode.
+          If no callback are configured for a given channel and direction, it is up to the user to poll the
+          status of the communication (polling mode).
+
+      (#) Notify the other MCU when a message is available in a chosen channel
+          or when a message has been retrieved from a chosen channel by calling
+          the HAL_IPCC_NotifyCPU() API.
+
+@endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32mp1xx_hal.h"
+
+/** @addtogroup STM32MP1xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup IPCC
+  * @{
+  */
+
+#ifdef HAL_IPCC_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @defgroup IPCC_Private_Constants IPCC Private Constants
+  * @{
+  */
+#define IPCC_ALL_RX_BUF 0x0000003FU /*!< Mask for all RX buffers. */
+#define IPCC_ALL_TX_BUF 0x003F0000U /*!< Mask for all TX buffers. */
+#define CHANNEL_INDEX_Msk 0x0000000FU /*!< Mask the channel index to avoid overflow */
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @defgroup IPCC_Private_Functions IPCC Private Functions
+  * @{
+  */
+void IPCC_MaskInterrupt(uint32_t ChannelIndex, IPCC_CHANNELDirTypeDef ChannelDir);
+void IPCC_UnmaskInterrupt(uint32_t ChannelIndex, IPCC_CHANNELDirTypeDef ChannelDir);
+void IPCC_SetDefaultCallbacks(IPCC_HandleTypeDef *hipcc);
+void IPCC_Reset_Register(IPCC_CommonTypeDef *Instance);
+/**
+  * @}
+  */
+
+/** @addtogroup IPCC_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup IPCC_Exported_Functions_Group1
+ *  @brief    Initialization and de-initialization functions
+ *
+@verbatim
+ ===============================================================================
+             ##### Initialization and de-initialization functions  #####
+ ===============================================================================
+    [..]  This subsection provides a set of functions allowing to initialize and
+          deinitialize the IPCC peripheral:
+
+      (+) User must Implement HAL_IPCC_MspInit() function in which he configures
+          all related peripherals resources (CLOCK and NVIC ).
+
+      (+) Call the function HAL_IPCC_Init() to configure the IPCC register.
+
+      (+) Call the function HAL_PKA_DeInit() to restore the default configuration
+          of the selected IPCC peripheral.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initialize the IPCC peripheral.
+  * @param  hipcc IPCC handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_IPCC_Init(IPCC_HandleTypeDef *hipcc)
+{
+  HAL_StatusTypeDef err = HAL_OK;
+
+  /* Check the IPCC handle allocation */
+  if (hipcc != NULL)
+  {
+    /* Check the parameters */
+    assert_param(IS_IPCC_ALL_INSTANCE(hipcc->Instance));
+
+#if defined(CORE_CM4)
+    IPCC_CommonTypeDef *currentInstance = IPCC_C2;
+#else
+    IPCC_CommonTypeDef *currentInstance = IPCC_C1;
+#endif
+
+    if (hipcc->State == HAL_IPCC_STATE_RESET)
+    {
+      /* Init the low level hardware : CLOCK, NVIC */
+      HAL_IPCC_MspInit(hipcc);
+    }
+
+    /* Reset all registers of the current cpu to default state */
+    IPCC_Reset_Register(currentInstance);
+
+    /* Activate the interrupts */
+    currentInstance->CR |= (IPCC_CR_RXOIE | IPCC_CR_TXFIE);
+
+    /* Clear callback pointers */
+    IPCC_SetDefaultCallbacks(hipcc);
+
+    /* Reset all callback notification request */
+    hipcc->callbackRequest = 0;
+
+    hipcc->State = HAL_IPCC_STATE_READY;
+  }
+  else
+  {
+    err = HAL_ERROR;
+  }
+
+  return err;
+}
+
+/**
+  * @brief  DeInitialize the IPCC peripheral.
+  * @param  hipcc IPCC handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_IPCC_DeInit(IPCC_HandleTypeDef *hipcc)
+{
+  HAL_StatusTypeDef err = HAL_OK;
+
+  /* Check the IPCC handle allocation */
+  if (hipcc != NULL)
+  {
+    assert_param(IS_IPCC_ALL_INSTANCE(hipcc->Instance));
+#if defined(CORE_CM4)
+    IPCC_CommonTypeDef *currentInstance = IPCC_C2;
+#else
+    IPCC_CommonTypeDef *currentInstance = IPCC_C1;
+#endif
+
+    /* Set the state to busy */
+    hipcc->State = HAL_IPCC_STATE_BUSY;
+
+    /* Reset all registers of the current cpu to default state */
+    IPCC_Reset_Register(currentInstance);
+
+    /* Clear callback pointers */
+    IPCC_SetDefaultCallbacks(hipcc);
+
+    /* Reset all callback notification request */
+    hipcc->callbackRequest = 0;
+
+    /* DeInit the low level hardware : CLOCK, NVIC */
+    HAL_IPCC_MspDeInit(hipcc);
+
+    hipcc->State = HAL_IPCC_STATE_RESET;
+  }
+  else
+  {
+    err = HAL_ERROR;
+  }
+
+  return err;
+}
+
+/**
+  * @brief Initialize the IPCC MSP.
+  * @param  hipcc IPCC handle
+  * @retval None
+  */
+__weak void HAL_IPCC_MspInit(IPCC_HandleTypeDef *hipcc)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hipcc);
+
+  /* NOTE : This function should not be modified. When the callback is needed
+            the HAL_IPCC_MspInit should be implemented in the user file
+   */
+}
+
+/**
+  * @brief IPCC MSP DeInit
+  * @param  hipcc IPCC handle
+  * @retval None
+  */
+__weak void HAL_IPCC_MspDeInit(IPCC_HandleTypeDef *hipcc)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hipcc);
+
+  /* NOTE : This function should not be modified. When the callback is needed
+            the HAL_IPCC_MspDeInit should be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+
+/** @addtogroup IPCC_Exported_Functions_Group2
+ *  @brief    Configuration, notification and Irq handling functions.
+ *
+@verbatim
+ ===============================================================================
+              ##### IO operation functions #####
+ ===============================================================================
+    [..]  This section provides functions to allow two MCU to communicate.
+
+    (#) For a given channel (from 0 to IPCC_CHANNEL_NUMBER), for a given direction
+        IPCC_CHANNEL_DIR_TX or IPCC_CHANNEL_DIR_RX, you can choose to communicate
+        in polling mode or in interrupt mode using IPCC.
+        By default, the IPCC HAL driver handle the communication in polling mode.
+        By setting a callback for a channel/direction, this communication use
+        the interrupt mode.
+
+    (#) Polling mode:
+       (++) To transmit information, use HAL_IPCC_NotifyCPU() with
+            IPCC_CHANNEL_DIR_TX. To know when the other processor has handled
+            the notification, poll the communication using HAL_IPCC_NotifyCPU
+            with IPCC_CHANNEL_DIR_TX.
+
+       (++) To receive information, poll the status of the communication with
+            HAL_IPCC_GetChannelStatus with IPCC_CHANNEL_DIR_RX. To notify the other
+            processor that the information has been received, use HAL_IPCC_NotifyCPU
+            with IPCC_CHANNEL_DIR_RX.
+
+    (#) Interrupt mode:
+       (++) Configure a callback for the channel and the direction using HAL_IPCC_ConfigChannel().
+            This callback will be triggered under interrupt.
+
+       (++) To transmit information, use HAL_IPCC_NotifyCPU() with
+            IPCC_CHANNEL_DIR_TX. The callback configured with HAL_IPCC_ConfigChannel() and
+            IPCC_CHANNEL_DIR_TX will be triggered once the communication has been handled by the
+            other processor.
+
+       (++) To receive information, the callback configured with HAL_IPCC_ConfigChannel() and
+            IPCC_CHANNEL_DIR_RX will be triggered on reception of a communication.To notify the other
+            processor that the information has been received, use HAL_IPCC_NotifyCPU
+            with IPCC_CHANNEL_DIR_RX.
+
+       (++) HAL_IPCC_TX_IRQHandler must be added to the IPCC TX IRQHandler
+
+       (++) HAL_IPCC_RX_IRQHandler must be added to the IPCC RX IRQHandler
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Activate the callback notification on receive/transmit interrupt
+  * @param  hipcc IPCC handle
+  * @param  ChannelIndex Channel number
+  *          This parameter can be one of the following values:
+  *            @arg IPCC_CHANNEL_1: IPCC Channel 1
+  *            @arg IPCC_CHANNEL_2: IPCC Channel 2
+  *            @arg IPCC_CHANNEL_3: IPCC Channel 3
+  *            @arg IPCC_CHANNEL_4: IPCC Channel 4
+  *            @arg IPCC_CHANNEL_5: IPCC Channel 5
+  *            @arg IPCC_CHANNEL_6: IPCC Channel 6
+  * @param  ChannelDir Channel direction
+  * @param  cb Interrupt callback
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_IPCC_ActivateNotification(IPCC_HandleTypeDef *hipcc, uint32_t ChannelIndex, IPCC_CHANNELDirTypeDef ChannelDir, ChannelCb cb)
+{
+  HAL_StatusTypeDef err = HAL_OK;
+
+  /* Check the IPCC handle allocation */
+  if (hipcc != NULL)
+  {
+    /* Check the parameters */
+    assert_param(IS_IPCC_ALL_INSTANCE(hipcc->Instance));
+
+    /* Check IPCC state */
+    if (hipcc->State == HAL_IPCC_STATE_READY)
+    {
+      /* Set callback and register masking information */
+      if (ChannelDir == IPCC_CHANNEL_DIR_TX)
+      {
+        hipcc->ChannelCallbackTx[ChannelIndex] = cb;
+        hipcc->callbackRequest |= (IPCC_MR_CH1FM_Msk << (ChannelIndex & CHANNEL_INDEX_Msk));
+      }
+      else
+      {
+        hipcc->ChannelCallbackRx[ChannelIndex] = cb;
+        hipcc->callbackRequest |= (IPCC_MR_CH1OM_Msk << (ChannelIndex & CHANNEL_INDEX_Msk));
+      }
+
+      /* Unmask only the channels in reception (Transmission channel mask/unmask is done in HAL_IPCC_NotifyCPU) */
+      if (ChannelDir == IPCC_CHANNEL_DIR_RX)
+      {
+        IPCC_UnmaskInterrupt(ChannelIndex, ChannelDir);
+      }
+    }
+    else
+    {
+      err = HAL_ERROR;
+    }
+  }
+  else
+  {
+    err = HAL_ERROR;
+  }
+  return err;
+}
+
+/**
+  * @brief  Remove the callback notification on receive/transmit interrupt
+  * @param  hipcc IPCC handle
+  * @param  ChannelIndex Channel number
+  *          This parameter can be one of the following values:
+  *            @arg IPCC_CHANNEL_1: IPCC Channel 1
+  *            @arg IPCC_CHANNEL_2: IPCC Channel 2
+  *            @arg IPCC_CHANNEL_3: IPCC Channel 3
+  *            @arg IPCC_CHANNEL_4: IPCC Channel 4
+  *            @arg IPCC_CHANNEL_5: IPCC Channel 5
+  *            @arg IPCC_CHANNEL_6: IPCC Channel 6
+  * @param  ChannelDir Channel direction
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_IPCC_DeActivateNotification(IPCC_HandleTypeDef *hipcc, uint32_t ChannelIndex, IPCC_CHANNELDirTypeDef ChannelDir)
+{
+  HAL_StatusTypeDef err = HAL_OK;
+
+  /* Check the IPCC handle allocation */
+  if (hipcc != NULL)
+  {
+    /* Check the parameters */
+    assert_param(IS_IPCC_ALL_INSTANCE(hipcc->Instance));
+
+    /* Check IPCC state */
+    if (hipcc->State == HAL_IPCC_STATE_READY)
+    {
+      /* Set default callback and register masking information */
+      if (ChannelDir == IPCC_CHANNEL_DIR_TX)
+      {
+        hipcc->ChannelCallbackTx[ChannelIndex] = HAL_IPCC_TxCallback;
+        hipcc->callbackRequest &= ~(IPCC_MR_CH1FM_Msk << (ChannelIndex & CHANNEL_INDEX_Msk));
+      }
+      else
+      {
+        hipcc->ChannelCallbackRx[ChannelIndex] = HAL_IPCC_RxCallback;
+        hipcc->callbackRequest &= ~(IPCC_MR_CH1OM_Msk << (ChannelIndex & CHANNEL_INDEX_Msk));
+      }
+
+      /* Mask the interrupt */
+      IPCC_MaskInterrupt(ChannelIndex, ChannelDir);
+    }
+    else
+    {
+      err = HAL_ERROR;
+    }
+  }
+  else
+  {
+    err = HAL_ERROR;
+  }
+  return err;
+}
+
+/**
+  * @brief  Get state of IPCC channel
+  * @param  hipcc IPCC handle
+  * @param  ChannelIndex Channel number
+  *          This parameter can be one of the following values:
+  *            @arg IPCC_CHANNEL_1: IPCC Channel 1
+  *            @arg IPCC_CHANNEL_2: IPCC Channel 2
+  *            @arg IPCC_CHANNEL_3: IPCC Channel 3
+  *            @arg IPCC_CHANNEL_4: IPCC Channel 4
+  *            @arg IPCC_CHANNEL_5: IPCC Channel 5
+  *            @arg IPCC_CHANNEL_6: IPCC Channel 6
+  * @param  ChannelDir Channel direction
+  * @retval Channel status
+  */
+IPCC_CHANNELStatusTypeDef HAL_IPCC_GetChannelStatus(IPCC_HandleTypeDef const *const hipcc, uint32_t ChannelIndex, IPCC_CHANNELDirTypeDef ChannelDir)
+{
+  uint32_t channel_state;
+#if defined(CORE_CM4)
+  IPCC_CommonTypeDef *currentInstance = IPCC_C2;
+  IPCC_CommonTypeDef *otherInstance = IPCC_C1;
+#else
+  IPCC_CommonTypeDef *currentInstance = IPCC_C1;
+  IPCC_CommonTypeDef *otherInstance = IPCC_C2;
+#endif
+
+  /* Check the parameters */
+  assert_param(IS_IPCC_ALL_INSTANCE(hipcc->Instance));
+
+  /* Read corresponding channel depending of the MCU and the direction */
+  if (ChannelDir == IPCC_CHANNEL_DIR_TX)
+  {
+    channel_state = (currentInstance->SR) & (IPCC_SR_CH1F_Msk << (ChannelIndex & CHANNEL_INDEX_Msk));
+  }
+  else
+  {
+    channel_state = (otherInstance->SR) & (IPCC_SR_CH1F_Msk << (ChannelIndex & CHANNEL_INDEX_Msk));
+  }
+
+  return (channel_state == 0UL) ? IPCC_CHANNEL_STATUS_FREE : IPCC_CHANNEL_STATUS_OCCUPIED ;
+}
+
+/**
+  * @brief  Notify remote processor
+  * @param  hipcc IPCC handle
+  * @param  ChannelIndex Channel number
+  *          This parameter can be one of the following values:
+  *            @arg IPCC_CHANNEL_1: IPCC Channel 1
+  *            @arg IPCC_CHANNEL_2: IPCC Channel 2
+  *            @arg IPCC_CHANNEL_3: IPCC Channel 3
+  *            @arg IPCC_CHANNEL_4: IPCC Channel 4
+  *            @arg IPCC_CHANNEL_5: IPCC Channel 5
+  *            @arg IPCC_CHANNEL_6: IPCC Channel 6
+  * @param  ChannelDir Channel direction
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_IPCC_NotifyCPU(IPCC_HandleTypeDef const *const hipcc, uint32_t ChannelIndex, IPCC_CHANNELDirTypeDef ChannelDir)
+{
+  HAL_StatusTypeDef err = HAL_OK;
+  uint32_t mask;
+#if defined(CORE_CM4)
+  IPCC_CommonTypeDef *currentInstance = IPCC_C2;
+#else
+  IPCC_CommonTypeDef *currentInstance = IPCC_C1;
+#endif
+
+  /* Check the parameters */
+  assert_param(IS_IPCC_ALL_INSTANCE(hipcc->Instance));
+
+  /* Check if IPCC is initiliased */
+  if (hipcc->State == HAL_IPCC_STATE_READY)
+  {
+    /* For IPCC_CHANNEL_DIR_TX, set the status. For IPCC_CHANNEL_DIR_RX, clear the status */
+    currentInstance->SCR |= ((ChannelDir == IPCC_CHANNEL_DIR_TX) ? IPCC_SCR_CH1S : IPCC_SCR_CH1C) << (ChannelIndex & CHANNEL_INDEX_Msk) ;
+
+    /* Unmask interrupt if the callback is requested */
+    mask = ((ChannelDir == IPCC_CHANNEL_DIR_TX) ? IPCC_MR_CH1FM_Msk : IPCC_MR_CH1OM_Msk) << (ChannelIndex & CHANNEL_INDEX_Msk) ;
+    if ((hipcc->callbackRequest & mask) == mask)
+    {
+      IPCC_UnmaskInterrupt(ChannelIndex, ChannelDir);
+    }
+  }
+  else
+  {
+    err = HAL_ERROR;
+  }
+
+  return err;
+}
+
+/**
+  * @}
+  */
+
+/** @addtogroup IPCC_IRQ_Handler_and_Callbacks
+ * @{
+ */
+
+/**
+  * @brief  This function handles IPCC Tx Free interrupt request.
+  * @param  hipcc IPCC handle
+  * @retval None
+  */
+void HAL_IPCC_TX_IRQHandler(IPCC_HandleTypeDef *const hipcc)
+{
+  uint32_t irqmask;
+  uint32_t bit_pos;
+  uint32_t ch_count = 0U;
+#if defined(CORE_CM4)
+  IPCC_CommonTypeDef *currentInstance = IPCC_C2;
+#else
+  IPCC_CommonTypeDef *currentInstance = IPCC_C1;
+#endif
+
+  /* check the Tx free channels which are not masked */
+  irqmask = ~(currentInstance->MR) & IPCC_ALL_TX_BUF;
+  irqmask = irqmask & ~(currentInstance->SR << IPCC_MR_CH1FM_Pos);
+
+  while (irqmask != 0UL)  /* if several bits are set, it loops to serve all of them */
+  {
+    bit_pos = 1UL << (IPCC_MR_CH1FM_Pos + (ch_count & CHANNEL_INDEX_Msk));
+
+    if ((irqmask & bit_pos) != 0U)
+    {
+      /* mask the channel Free interrupt  */
+      currentInstance->MR |= bit_pos;
+      if (hipcc->ChannelCallbackTx[ch_count] != NULL)
+      {
+        hipcc->ChannelCallbackTx[ch_count](hipcc, ch_count, IPCC_CHANNEL_DIR_TX);
+      }
+      irqmask =  irqmask & ~(bit_pos);
+    }
+    ch_count++;
+  }
+}
+
+/**
+  * @brief  This function handles IPCC Rx Occupied interrupt request.
+  * @param  hipcc : IPCC handle
+  * @retval None
+  */
+void HAL_IPCC_RX_IRQHandler(IPCC_HandleTypeDef *const hipcc)
+{
+  uint32_t irqmask;
+  uint32_t bit_pos;
+  uint32_t ch_count = 0U;
+#if defined(CORE_CM4)
+  IPCC_CommonTypeDef *currentInstance = IPCC_C2;
+  IPCC_CommonTypeDef *otherInstance = IPCC_C1;
+#else
+  IPCC_CommonTypeDef *currentInstance = IPCC_C1;
+  IPCC_CommonTypeDef *otherInstance = IPCC_C2;
+#endif
+
+  /* check the Rx occupied channels which are not masked */
+  irqmask = ~(currentInstance->MR) & IPCC_ALL_RX_BUF;
+  irqmask = irqmask & otherInstance->SR;
+
+  while (irqmask != 0UL)  /* if several bits are set, it loops to serve all of them */
+  {
+    bit_pos = 1UL << (ch_count & CHANNEL_INDEX_Msk);
+
+    if ((irqmask & bit_pos) != 0U)
+    {
+      /* mask the channel occupied interrupt */
+      currentInstance->MR |= bit_pos;
+      if (hipcc->ChannelCallbackRx[ch_count] != NULL)
+      {
+        hipcc->ChannelCallbackRx[ch_count](hipcc, ch_count, IPCC_CHANNEL_DIR_RX);
+      }
+      irqmask = irqmask & ~(bit_pos);
+    }
+    ch_count++;
+  }
+}
+
+/**
+  * @brief Rx occupied callback
+  * @param hipcc IPCC handle
+  * @param ChannelIndex Channel number
+  *          This parameter can be one of the following values:
+  *            @arg IPCC_CHANNEL_1: IPCC Channel 1
+  *            @arg IPCC_CHANNEL_2: IPCC Channel 2
+  *            @arg IPCC_CHANNEL_3: IPCC Channel 3
+  *            @arg IPCC_CHANNEL_4: IPCC Channel 4
+  *            @arg IPCC_CHANNEL_5: IPCC Channel 5
+  *            @arg IPCC_CHANNEL_6: IPCC Channel 6
+  * @param ChannelDir Channel direction
+  */
+__weak void HAL_IPCC_RxCallback(IPCC_HandleTypeDef *hipcc, uint32_t ChannelIndex, IPCC_CHANNELDirTypeDef ChannelDir)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hipcc);
+  UNUSED(ChannelIndex);
+  UNUSED(ChannelDir);
+
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_IPCC_RxCallback can be implemented in the user file
+   */
+}
+
+/**
+  * @brief Tx free callback
+  * @param hipcc IPCC handle
+  * @param ChannelIndex Channel number
+  *          This parameter can be one of the following values:
+  *            @arg IPCC_CHANNEL_1: IPCC Channel 1
+  *            @arg IPCC_CHANNEL_2: IPCC Channel 2
+  *            @arg IPCC_CHANNEL_3: IPCC Channel 3
+  *            @arg IPCC_CHANNEL_4: IPCC Channel 4
+  *            @arg IPCC_CHANNEL_5: IPCC Channel 5
+  *            @arg IPCC_CHANNEL_6: IPCC Channel 6
+  * @param ChannelDir Channel direction
+  */
+__weak void HAL_IPCC_TxCallback(IPCC_HandleTypeDef *hipcc, uint32_t ChannelIndex, IPCC_CHANNELDirTypeDef ChannelDir)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hipcc);
+  UNUSED(ChannelIndex);
+  UNUSED(ChannelDir);
+
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_IPCC_TxCallback can be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @addtogroup IPCC_Exported_Functions_Group3
+ *  @brief   IPCC Peripheral State and Error functions
+ *
+@verbatim
+  ==============================================================================
+            ##### Peripheral State and Error functions #####
+  ==============================================================================
+    [..]
+    This subsection permit to get in run-time the status of the peripheral
+    and the data flow.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief Return the IPCC handle state.
+  * @param  hipcc IPCC handle
+  * @retval IPCC handle state
+  */
+HAL_IPCC_StateTypeDef HAL_IPCC_GetState(IPCC_HandleTypeDef const *const hipcc)
+{
+  return hipcc->State;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup IPCC_Private_Functions
+  * @{
+  */
+
+/**
+  * @brief  Mask IPCC interrupts.
+  * @param  ChannelIndex Channel number
+  *          This parameter can be one of the following values:
+  *            @arg IPCC_CHANNEL_1: IPCC Channel 1
+  *            @arg IPCC_CHANNEL_2: IPCC Channel 2
+  *            @arg IPCC_CHANNEL_3: IPCC Channel 3
+  *            @arg IPCC_CHANNEL_4: IPCC Channel 4
+  *            @arg IPCC_CHANNEL_5: IPCC Channel 5
+  *            @arg IPCC_CHANNEL_6: IPCC Channel 6
+  * @param  ChannelDir Channel direction
+  */
+void IPCC_MaskInterrupt(uint32_t ChannelIndex, IPCC_CHANNELDirTypeDef ChannelDir)
+{
+#if defined(CORE_CM4)
+  IPCC_CommonTypeDef *currentInstance = IPCC_C2;
+#else
+  IPCC_CommonTypeDef *currentInstance = IPCC_C1;
+#endif
+  if (ChannelDir == IPCC_CHANNEL_DIR_TX)
+  {
+    /* Mask interrupt */
+    currentInstance->MR |= (IPCC_MR_CH1FM_Msk << (ChannelIndex & CHANNEL_INDEX_Msk));
+  }
+  else
+  {
+    /* Mask interrupt */
+    currentInstance->MR |= (IPCC_MR_CH1OM_Msk << (ChannelIndex & CHANNEL_INDEX_Msk));
+  }
+}
+/**
+  * @brief  Unmask IPCC interrupts.
+  * @param  ChannelIndex Channel number
+  *          This parameter can be one of the following values:
+  *            @arg IPCC_CHANNEL_1: IPCC Channel 1
+  *            @arg IPCC_CHANNEL_2: IPCC Channel 2
+  *            @arg IPCC_CHANNEL_3: IPCC Channel 3
+  *            @arg IPCC_CHANNEL_4: IPCC Channel 4
+  *            @arg IPCC_CHANNEL_5: IPCC Channel 5
+  *            @arg IPCC_CHANNEL_6: IPCC Channel 6
+  * @param  ChannelDir Channel direction
+  */
+void IPCC_UnmaskInterrupt(uint32_t ChannelIndex, IPCC_CHANNELDirTypeDef ChannelDir)
+{
+#if defined(CORE_CM4)
+  IPCC_CommonTypeDef *currentInstance = IPCC_C2;
+#else
+  IPCC_CommonTypeDef *currentInstance = IPCC_C1;
+#endif
+  if (ChannelDir == IPCC_CHANNEL_DIR_TX)
+  {
+    /* Unmask interrupt */
+    currentInstance->MR &= ~(IPCC_MR_CH1FM_Msk << (ChannelIndex & CHANNEL_INDEX_Msk));
+  }
+  else
+  {
+    /* Unmask interrupt */
+    currentInstance->MR &= ~(IPCC_MR_CH1OM_Msk << (ChannelIndex & CHANNEL_INDEX_Msk));
+  }
+}
+
+/**
+  * @brief Reset all callbacks of the handle to NULL.
+  * @param  hipcc IPCC handle
+  */
+void IPCC_SetDefaultCallbacks(IPCC_HandleTypeDef *hipcc)
+{
+  uint32_t i;
+  /* Set all callbacks to default */
+  for (i = 0; i < IPCC_CHANNEL_NUMBER; i++)
+  {
+    hipcc->ChannelCallbackRx[i] = HAL_IPCC_RxCallback;
+    hipcc->ChannelCallbackTx[i] = HAL_IPCC_TxCallback;
+  }
+}
+
+/**
+  * @brief Reset IPCC register to default value for the concerned instance.
+  * @param  Instance pointer to register
+  */
+void IPCC_Reset_Register(IPCC_CommonTypeDef *Instance)
+{
+  /* Disable RX and TX interrupts */
+  Instance->CR  = 0x00000000U;
+
+  /* Mask RX and TX interrupts */
+  Instance->MR  = (IPCC_ALL_TX_BUF | IPCC_ALL_RX_BUF);
+
+  /* Clear RX status */
+  Instance->SCR = IPCC_ALL_RX_BUF;
+}
+
+/**
+  * @}
+  */
+
+#endif /* HAL_IPCC_MODULE_ENABLED */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+

meta-st/meta-st-stm32mp-addons/mx/stm32mp157d-vrpmdv-mon-mx/Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_pwr.c

@@ -0,0 +1,796 @@
+/**
+  ******************************************************************************
+  * @file    stm32mp1xx_hal_pwr.c
+  * @author  MCD Application Team
+  * @brief   PWR HAL module driver.
+  *          This file provides firmware functions to manage the following
+  *          functionalities of the Power Controller (PWR) peripheral:
+  *           + Initialization and de-initialization functions
+  *           + Peripheral Control functions
+  *
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32mp1xx_hal.h"
+
+
+
+/** @addtogroup STM32MP1xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup PWR PWR
+  * @brief PWR HAL module driver
+  * @{
+  */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup PWR_Private_Constants PWR Private Constants
+  * @{
+  */
+
+/** @defgroup PWR_PVD_Mode_Mask PWR PVD Mode Mask
+  * @{
+  */
+#define PVD_MODE_IT              ((uint32_t)0x00010000U)
+#define PVD_RISING_EDGE          ((uint32_t)0x00000001U)
+#define PVD_FALLING_EDGE         ((uint32_t)0x00000002U)
+#define PVD_RISING_FALLING_EDGE  ((uint32_t)0x00000003U)
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup PWR_Private_Functions PWR Private Functions
+  * @{
+  */
+
+/** @defgroup PWR_Group1 Initialization and de-initialization functions
+  *  @brief    Initialization and de-initialization functions
+  *
+@verbatim
+ ===============================================================================
+              ##### Initialization and de-initialization functions #####
+ ===============================================================================
+    [..]
+      After reset, the backup domain (RTC registers, RTC backup data
+      registers and backup SRAM) is protected against possible unwanted
+      write accesses.
+      To enable access to the RTC Domain and RTC registers, proceed as follows:
+        (+) Enable access to RTC domain using the HAL_PWR_EnableBkUpAccess()
+            function.
+
+@endverbatim
+  * @{
+  */
+
+
+/**
+  * @brief  Enables access to the backup domain
+  *         In reset state, the RCC_BDCR, PWR_CR2, RTC, and backup registers are
+  *         protected against parasitic write access. DBP bit must be set to
+  *         enable write access to these.
+  * @note   If the HSE divided by 2, 3, ..31 is used as the RTC clock, the
+  *         Backup Domain Access should be kept enabled.
+  * @retval None
+  */
+void HAL_PWR_EnableBkUpAccess(void)
+{
+  /* Enable access to RTC and backup registers */
+  SET_BIT(PWR->CR1, PWR_CR1_DBP);
+}
+
+/**
+  * @brief Disables access to the backup domain (RTC registers, RTC
+  *         backup data registers and backup SRAM).
+  * @note If the HSE divided by 2, 3, ..31 is used as the RTC clock, the
+  *         Backup Domain Access should be kept enabled.
+  * @retval None
+  */
+void HAL_PWR_DisableBkUpAccess(void)
+{
+  /* Disable access to RTC and backup registers */
+  CLEAR_BIT(PWR->CR1, PWR_CR1_DBP);
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup PWR_Group2 Peripheral Control functions
+  *  @brief Low Power modes configuration functions
+  *
+@verbatim
+
+ ===============================================================================
+                 ##### Peripheral Control functions #####
+ ===============================================================================
+
+    *** PVD configuration ***
+    =========================
+    [..]
+      (+) The PVD is used to monitor the VDD power supply by comparing it to a
+          threshold selected by the PVD Level (PLS[2:0] bits in the PWR_CR1).
+      (+) The PVD can also be used to monitor a voltage level on the PVD_IN pin.
+          In this case, the voltage level on PVD_IN is compared to the internal
+          VREFINT level.
+      (+) A PVDO flag is available, in the PWR control status register 1
+          (PWR_CSR1), to indicate whether VDD or voltage level on PVD_IN is
+          higher or lower than the PVD threshold. This event is internally
+          connected to the EXTI line16 and can generate an interrupt if enabled.
+          This is done through __HAL_PWR_PVD_AVD_EXTI_ENABLE_IT() macro.
+      (+) The PVD is stopped in Standby mode.
+
+    *** WakeUp pins configuration ***
+    ================================
+    [..]
+      (+) WakeUp pins are used to wake up the system from Standby mode. WKUP
+          pins, if enabled, the WKUP pin pulls can be configured by WKUPPUPD
+          register bits in PWR wakeup control register (PWR_WKUPCR).
+
+    *** Low Power modes configuration ***
+    =====================================
+    [..]
+      Several Low-power modes are available to save power when the MPU and/or
+      MCU do not need to execute code (i.e. when waiting for an external event).
+      Please refer to Reference Manual for more information.
+      MPU and MCU sub-system modes:
+      (+) CSleep mode: MPU/MCU clocks stopped and the MPU/MCU sub-system allocated
+                       peripheral(s) clocks operate according to RCC PERxLPEN
+      (+) CStop mode: MPU/MCU and MPU/MCU sub-system peripheral(s) clock stopped
+      (+) CStandby mode: MPU and MPU sub-system peripheral(s) clock stopped and
+                         wakeup via reset
+      System modes:
+      (+) Stop mode: bus matrix clocks stalled, the oscillators can be stopped.
+                     VDDCORE is supplied.
+                     To enter into this mode:
+                     - Both MPU and MCU sub-systems are in CStop or CStandby.
+                     - At least one PDDS bit (PWR_MPUCR/PWR_MCUCR) selects Stop.
+      (+) LP-Stop mode: bus matrix clocks stalled, the oscillators can be stopped.
+                        VDDCORE is supplied.
+                        To enter into this mode:
+                        - Both MPU and MCU sub-systems are in CStop or CStandby.
+                        - The LPDS bit (PWR_CR1) selects LP-Stop.
+                        - The LVDS bit (PWR_CR1) selects normal voltage.
+                        - At least one PDDS bit (PWR_MPUCR/PWR_MCUCR) selects Stop.
+      (+) LPLV-Stop mode: bus matrix clocks stalled, the oscillators can be stopped.
+                          VDDCORE may be supplied at a lower level.
+                          To enter into this mode:
+                          - Both MPU and MCU sub-systems are in CStop or CStandby.
+                          - The LPDS and LVDS bits (PWR_CR1) select LPLV-Stop.
+                          - At least one PDDS bit (PWR_MPUCR/PWR_MCUCR) selects Stop.
+      (+) Standby mode: System powered down.
+                        To enter into this mode:
+                        - MPU sub-system is in CStandby or CStop with CSTBYDIS = 1
+                          and MCU subsystem is in CStop.
+                        - All PDDS bits (PWR_MPUCR/PWR_MCUCR) select Standby.
+
+   *** CSleep mode ***
+   ==================
+    [..]
+      (+) Entry:
+        The CSleep mode is entered by using the HAL_PWR_EnterSLEEPMode(Regulator, SLEEPEntry)
+        functions with:
+        (++) STOPEntry:
+          (++) PWR_SLEEPENTRY_WFI: enter SLEEP mode with WFI instruction
+          (++) PWR_SLEEPENTRY_WFE: enter SLEEP mode with WFE instruction
+
+      -@@- The Regulator parameter is not used for the STM32MP1 family
+           and is kept as parameter just to maintain compatibility with the
+           lower power families (STM32L). Use i.e. PWR_MAINREGULATOR_ON
+      (+) Exit:
+          MCU: Any peripheral interrupt acknowledged by the nested vectored interrupt
+          controller (NVIC) if entered by WFI or any event if entered by WFE
+          MPU: Any Interrupt enabled in GIC if entered by WFI or any event if
+          entered by WFE
+
+
+   *** CStop mode ***
+   =================
+    [..]
+      (+) Entry:
+         The CStop mode is entered using the HAL_PWR_EnterSTOP(ModeRegulator, STOPEntry)
+         function with:
+         (++) Regulator:
+          (+++) PWR_MAINREGULATOR_ON: Main regulator ON.
+          (+++) PWR_LOWPOWERREGULATOR_ON: Low Power regulator ON.
+         (++) STOPEntry:
+          (+++) PWR_STOPENTRY_WFI: enter STOP mode with WFI instruction
+          (+++) PWR_STOPENTRY_WFE: enter STOP mode with WFE instruction
+      (+) Exit:
+          MCU: Any EXTI Line (Internal or External) configured in Interrupt/Event mode
+          depending of entry mode.
+          MPU: Any EXTI Line (Internal or External) configured in Interrupt mode
+
+   *** MPU CStandby mode / MCU CStop allowing Standby mode ***
+   ====================
+    [..]
+    (+)
+      The Standby mode allows to achieve the lowest power consumption. On Standby
+      mode the voltage regulator is disabled. The PLLs, the HSI oscillator and
+      the HSE oscillator are also switched off. SRAM and register contents are
+      lost except for the RTC registers, RTC backup registers, backup SRAM and
+      Standby circuitry.
+
+      (++) Entry:
+        (+++) The MPU CStandby mode / MCU CStop allowing Standby mode is entered
+              using the HAL_PWR_EnterSTANDBYMode() function.
+      (++) Exit:
+           Any EXTI Line (Internal or External) configured in Interrupt mode
+           if system is not in Standby mode
+        (+++) If system is in Standby mode wake up is generated by reset through:
+              WKUP pins, RTC alarm (Alarm A and Alarm B), RTC wakeup, tamper
+              event, time-stamp event, external reset in NRST pin, IWDG reset.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Configures the voltage threshold detected by the Power Voltage Detector(PVD).
+  * @param  sConfigPVD: pointer to an PWR_PVDTypeDef structure that contains the configuration
+  *         information for the PVD.
+  * @note   Refer to the electrical characteristics of your device datasheet for
+  *         more details about the voltage threshold corresponding to each
+  *         detection level.
+  * @retval None
+  */
+void HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD)
+{
+  /* Check the parameters */
+  assert_param(IS_PWR_PVD_LEVEL(sConfigPVD->PVDLevel));
+  assert_param(IS_PWR_PVD_MODE(sConfigPVD->Mode));
+
+  /* Set PLS[7:5] bits according to PVDLevel value */
+  MODIFY_REG(PWR->CR1, PWR_CR1_PLS, sConfigPVD->PVDLevel);
+
+  /* Clear any previous config. Keep it clear if no IT mode is selected */
+  __HAL_PWR_PVD_AVD_EXTI_DISABLE_IT();
+  __HAL_PWR_PVD_AVD_EXTI_DISABLE_RISING_FALLING_EDGE();
+
+  /* Configure interrupt mode */
+  if ((sConfigPVD->Mode & PVD_MODE_IT) == PVD_MODE_IT)
+  {
+    __HAL_PWR_PVD_AVD_EXTI_ENABLE_IT();
+  }
+
+  /* Configure the edge */
+  if ((sConfigPVD->Mode & PVD_RISING_EDGE) == PVD_RISING_EDGE)
+  {
+    __HAL_PWR_PVD_AVD_EXTI_ENABLE_RISING_EDGE();
+  }
+
+  if ((sConfigPVD->Mode & PVD_FALLING_EDGE) == PVD_FALLING_EDGE)
+  {
+    __HAL_PWR_PVD_AVD_EXTI_ENABLE_FALLING_EDGE();
+  }
+}
+
+/**
+  * @brief Enables the Power Voltage Detector(PVD).
+  * @retval None
+  */
+void HAL_PWR_EnablePVD(void)
+{
+  /* Enable the power voltage detector */
+  SET_BIT(PWR->CR1, PWR_CR1_PVDEN);
+}
+
+/**
+  * @brief Disables the Power Voltage Detector(PVD).
+  * @retval None
+  */
+void HAL_PWR_DisablePVD(void)
+{
+  /* Disable the power voltage detector */
+  CLEAR_BIT(PWR->CR1, PWR_CR1_PVDEN);
+}
+
+/**
+  * @brief Enable the WakeUp PINx functionality.
+  * @param WakeUpPinPolarity: Specifies which Wake-Up pin to enable.
+  *         This parameter can be one of the following legacy values, which sets the default polarity:
+  *         detection on high level (rising edge):
+  *           @arg PWR_WAKEUP_PIN1, PWR_WAKEUP_PIN2, PWR_WAKEUP_PIN3, PWR_WAKEUP_PIN4, PWR_WAKEUP_PIN5, PWR_WAKEUP_PIN6
+  *                or one of the following value where the user can explicitly states the enabled pin and
+  *                the chosen polarity
+  *           @arg PWR_WAKEUP_PIN1_HIGH or PWR_WAKEUP_PIN1_LOW or
+  *           @arg PWR_WAKEUP_PIN2_HIGH or PWR_WAKEUP_PIN2_LOW
+  *           @arg PWR_WAKEUP_PIN3_HIGH or PWR_WAKEUP_PIN3_LOW
+  *           @arg PWR_WAKEUP_PIN4_HIGH or PWR_WAKEUP_PIN4_LOW
+  *           @arg PWR_WAKEUP_PIN5_HIGH or PWR_WAKEUP_PIN5_LOW
+  *           @arg PWR_WAKEUP_PIN6_HIGH or PWR_WAKEUP_PIN6_LOW
+  * @note  PWR_WAKEUP_PINx and PWR_WAKEUP_PINx_HIGH are equivalent.
+  *
+  * @note  GPIOs are set as next when WKUP pin is enabled (Additional function)
+  *         WKUP1 :  PA0
+  *         WKUP2 :  PA2
+  *         WKUP3 :  PC13
+  *         WKUP4 :  PI8
+  *         WKUP5 :  PI11
+  *         WKUP6 :  PC1
+  * @retval None
+  */
+void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinPolarity)
+{
+  uint32_t clear_mask = 0;
+
+  assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinPolarity));
+
+  if ((WakeUpPinPolarity & PWR_WAKEUP_PIN1) == PWR_WAKEUP_PIN1)
+  {
+    clear_mask  |= (PWR_WKUPCR_WKUPP_1 | PWR_WKUPCR_WKUPPUPD1);
+  }
+  if ((WakeUpPinPolarity & PWR_WAKEUP_PIN2) == PWR_WAKEUP_PIN2)
+  {
+    clear_mask  |= (PWR_WKUPCR_WKUPP_2 | PWR_WKUPCR_WKUPPUPD2);
+  }
+  if ((WakeUpPinPolarity & PWR_WAKEUP_PIN3) == PWR_WAKEUP_PIN3)
+  {
+    clear_mask  |= (PWR_WKUPCR_WKUPP_3 | PWR_WKUPCR_WKUPPUPD3);
+  }
+  if ((WakeUpPinPolarity & PWR_WAKEUP_PIN4) == PWR_WAKEUP_PIN4)
+  {
+    clear_mask  |= (PWR_WKUPCR_WKUPP_4 | PWR_WKUPCR_WKUPPUPD4);
+  }
+  if ((WakeUpPinPolarity & PWR_WAKEUP_PIN5) == PWR_WAKEUP_PIN5)
+  {
+    clear_mask  |= (PWR_WKUPCR_WKUPP_5 | PWR_WKUPCR_WKUPPUPD5);
+  }
+  if ((WakeUpPinPolarity & PWR_WAKEUP_PIN6) == PWR_WAKEUP_PIN6)
+  {
+    clear_mask  |= (PWR_WKUPCR_WKUPP_6 | PWR_WKUPCR_WKUPPUPD6);
+  }
+
+  /* Enables and Specifies the Wake-Up pin polarity and the pull configuration
+     for the event detection (rising or falling edge) */
+#ifdef CORE_CA7
+  CLEAR_BIT(PWR->MPUWKUPENR, (WakeUpPinPolarity & PWR_WAKEUP_PIN_MASK)); /* Disable WKUP pin */
+  MODIFY_REG(PWR->WKUPCR, clear_mask,
+             (WakeUpPinPolarity & (PWR_WKUPCR_WKUPP | PWR_WKUPCR_WKUPPUPD))); /* Modify polarity and pull configuration */
+  SET_BIT(PWR->WKUPCR, (WakeUpPinPolarity & PWR_WKUPCR_WKUPC)); /* Clear wake up flag */
+  SET_BIT(PWR->MPUWKUPENR, (WakeUpPinPolarity & PWR_WAKEUP_PIN_MASK)); /* Enable the Wake up pin for CPU1 */
+#endif
+#ifdef CORE_CM4
+  CLEAR_BIT(PWR->MCUWKUPENR, (WakeUpPinPolarity & PWR_WAKEUP_PIN_MASK)); /* Disable WKUP pin */
+  MODIFY_REG(PWR->WKUPCR, clear_mask,
+             (WakeUpPinPolarity & (PWR_WKUPCR_WKUPP | PWR_WKUPCR_WKUPPUPD))); /* Modify polarity and pull configuration */
+  SET_BIT(PWR->WKUPCR, (WakeUpPinPolarity & PWR_WKUPCR_WKUPC)); /* Clear wake up flag */
+  SET_BIT(PWR->MCUWKUPENR, (WakeUpPinPolarity & PWR_WAKEUP_PIN_MASK)); /* Enable the Wake up pin for CPU2 */
+#endif
+}
+
+
+/**
+  * @brief Disables the WakeUp PINx functionality.
+  * @param WakeUpPinx: Specifies the Power Wake-Up pin to disable.
+  *         This parameter can be one of the following values:
+  *           @arg PWR_WAKEUP_PIN1
+  *           @arg PWR_WAKEUP_PIN2
+  *           @arg PWR_WAKEUP_PIN3
+  *           @arg PWR_WAKEUP_PIN4
+  *           @arg PWR_WAKEUP_PIN5
+  *           @arg PWR_WAKEUP_PIN6
+  * @retval None
+  */
+void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx)
+{
+  assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinx));
+#ifdef CORE_CA7
+  CLEAR_BIT(PWR->MPUWKUPENR, (WakeUpPinx & PWR_WAKEUP_PIN_MASK));
+#endif
+#ifdef CORE_CM4
+  CLEAR_BIT(PWR->MCUWKUPENR, (WakeUpPinx & PWR_WAKEUP_PIN_MASK));
+#endif
+}
+
+
+/**
+  * @brief Enable WakeUp PINx Interrupt on AIEC and NVIC.
+  * @param WakeUpPinx: Specifies the Power Wake-Up pin
+  *         This parameter can be one of the following values:
+  *           @arg PWR_WAKEUP_PIN1
+  *           @arg PWR_WAKEUP_PIN2
+  *           @arg PWR_WAKEUP_PIN3
+  *           @arg PWR_WAKEUP_PIN4
+  *           @arg PWR_WAKEUP_PIN5
+  *           @arg PWR_WAKEUP_PIN6
+  * @retval None
+  */
+void HAL_PWR_EnableWakeUpPinIT(uint32_t WakeUpPinx)
+{
+  assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinx));
+  switch ((WakeUpPinx & PWR_WAKEUP_PIN_MASK))
+  {
+    case PWR_WAKEUP_PIN1:
+      __HAL_WKUP_EXTI_ENABLE_IT(EXTI_IMR2_IM55);
+      break;
+
+    case PWR_WAKEUP_PIN2:
+      __HAL_WKUP_EXTI_ENABLE_IT(EXTI_IMR2_IM56);
+      break;
+
+    case PWR_WAKEUP_PIN3:
+      __HAL_WKUP_EXTI_ENABLE_IT(EXTI_IMR2_IM57);
+      break;
+
+    case PWR_WAKEUP_PIN4:
+      __HAL_WKUP_EXTI_ENABLE_IT(EXTI_IMR2_IM58);
+      break;
+
+    case PWR_WAKEUP_PIN5:
+      __HAL_WKUP_EXTI_ENABLE_IT(EXTI_IMR2_IM59);
+      break;
+
+    case PWR_WAKEUP_PIN6:
+      __HAL_WKUP_EXTI_ENABLE_IT(EXTI_IMR2_IM60);
+      break;
+  }
+}
+
+
+/**
+  * @brief Disable WakeUp PINx Interrupt on AIEC and NVIC.
+  * @param WakeUpPinx: Specifies the Power Wake-Up pin
+  *         This parameter can be one of the following values:
+  *           @arg PWR_WAKEUP_PIN1
+  *           @arg PWR_WAKEUP_PIN2
+  *           @arg PWR_WAKEUP_PIN3
+  *           @arg PWR_WAKEUP_PIN4
+  *           @arg PWR_WAKEUP_PIN5
+  *           @arg PWR_WAKEUP_PIN6
+  * @retval None
+  */
+void HAL_PWR_DisableWakeUpPinIT(uint32_t WakeUpPinx)
+{
+  assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinx));
+  switch ((WakeUpPinx & PWR_WAKEUP_PIN_MASK))
+  {
+    case PWR_WAKEUP_PIN1:
+      __HAL_WKUP_EXTI_DISABLE_IT(EXTI_IMR2_IM55);
+      break;
+
+    case PWR_WAKEUP_PIN2:
+      __HAL_WKUP_EXTI_DISABLE_IT(EXTI_IMR2_IM56);
+      break;
+
+    case PWR_WAKEUP_PIN3:
+      __HAL_WKUP_EXTI_DISABLE_IT(EXTI_IMR2_IM57);
+      break;
+
+    case PWR_WAKEUP_PIN4:
+      __HAL_WKUP_EXTI_DISABLE_IT(EXTI_IMR2_IM58);
+      break;
+
+    case PWR_WAKEUP_PIN5:
+      __HAL_WKUP_EXTI_DISABLE_IT(EXTI_IMR2_IM59);
+      break;
+
+    case PWR_WAKEUP_PIN6:
+      __HAL_WKUP_EXTI_DISABLE_IT(EXTI_IMR2_IM60);
+      break;
+  }
+}
+
+/**
+  * @brief Enters CSleep mode.
+  *
+  * @note In CSleep mode, all I/O pins keep the same state as in Run mode.
+  *
+  * @note In CSleep mode, the systick is stopped to avoid exit from this mode with
+  *       systick interrupt when used as time base for Timeout
+  *
+  * @param Regulator: Specifies the regulator state in CSLEEP mode.
+  *          This parameter is not used for the STM32MP1 family and is kept as
+  *          parameter just to maintain compatibility with the lower power families
+  *            This parameter can be one of the following values:
+  *            @arg PWR_MAINREGULATOR_ON: CSLEEP mode with regulator ON
+  *            @arg PWR_LOWPOWERREGULATOR_ON: CSLEEP mode with low power regulator ON
+  * @param SLEEPEntry: Specifies if CSLEEP mode in entered with WFI or WFE instruction.
+  *          This parameter can be one of the following values:
+  *            @arg PWR_SLEEPENTRY_WFI: enter CSLEEP mode with WFI instruction
+  *            @arg PWR_SLEEPENTRY_WFE: enter CSLEEP mode with WFE instruction
+  * @retval None
+  */
+void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry)
+{
+  /* Check the parameters */
+  assert_param(IS_PWR_REGULATOR(Regulator));
+  assert_param(IS_PWR_SLEEP_ENTRY(SLEEPEntry));
+
+#ifdef CORE_CM4
+  /* Ensure CM4 do not enter to CSTOP mode */
+  /* Clear SLEEPDEEP bit of Cortex System Control Register */
+  CLEAR_BIT(SCB->SCR, SCB_SCR_SLEEPDEEP_Msk);
+#endif
+
+  /* Select SLEEP mode entry -------------------------------------------------*/
+  if (SLEEPEntry == PWR_SLEEPENTRY_WFI)
+  {
+    /* Request Wait For Interrupt */
+    __WFI();
+  }
+  else
+  {
+    /* Request Wait For Event */
+    __SEV();
+    __WFE();
+    __WFE();
+  }
+}
+
+
+/**
+  * @brief Enters CSTOP
+  *        This function puts core domain into CSTOP allowing system STOP mode
+  *        if both MPU and MCU cores are on CSTOP mode
+  * @note In Stop mode, all I/O pins keep the same state as in Run mode.
+  * @note When exiting Stop mode by issuing an interrupt or a wake up event,
+  *       the HSI oscillator is selected as CM4 system clock.
+  * @note RCC_WAKEUP_IRQn IT must be programmed to have the highest priority and
+  *       to be the only one IT having this value before calling HAL_PWR_EnterSTOPMode.
+  *       Make sure RCC_WAKEUP_IRQn is the only one IT allowed to wake up core
+  *       before calling  HAL_PWR_EnterSTOPMode (BASEPRI)
+  *       Reestablish priority level once system is completely waken up (clock
+  *       restore and IO compensation)
+  * @note When the voltage regulator operates in low power mode, an additional
+  *         startup delay is incurred when waking up from Stop mode.
+  *         By keeping the internal regulator ON during Stop mode, the consumption
+  *         is higher although the startup time is reduced.
+  * @param Regulator: Specifies the regulator state in Stop mode.
+  *          This parameter is unused on MCU but any value must be provided.
+  *          This parameter can be one of the following values:
+  *            @arg PWR_MAINREGULATOR_ON: Stop mode with regulator ON
+  *            @arg PWR_LOWPOWERREGULATOR_ON: Stop mode with low power regulator ON
+  * @param STOPEntry: Specifies if CStop mode is entered with WFI or WFE instruction.
+  *          This parameter can be one of the following values:
+  *            @arg PWR_STOPENTRY_WFI: Enter CStop mode with WFI instruction
+  *            @arg PWR_STOPENTRY_WFE: Enter CStop mode with WFE instruction
+  * @retval None
+  */
+void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry)
+{
+  /* Check the parameters */
+  assert_param(IS_PWR_REGULATOR(Regulator));
+  assert_param(IS_PWR_STOP_ENTRY(STOPEntry));
+
+#ifdef CORE_CM4
+  /*Forbid going to STANDBY mode (select STOP mode) */
+  CLEAR_BIT(PWR->MCUCR, PWR_MCUCR_PDDS);
+
+  /*Allow CORE_CM4 to enter CSTOP mode
+  Set SLEEPDEEP bit of Cortex System Control Register */
+  SET_BIT(SCB->SCR, SCB_SCR_SLEEPDEEP_Msk);
+#endif/* CORE_CM4 */
+
+#ifdef CORE_CA7
+  if (Regulator == PWR_MAINREGULATOR_ON)
+  {
+    /* Select STOP mode */
+    CLEAR_BIT(PWR->CR1, PWR_CR1_LPDS);
+  }
+  else
+  {
+    /* Select LP-STOP mode */
+    SET_BIT(PWR->CR1, PWR_CR1_LPDS);
+  }
+
+  /* Clear MPU STANDBY, STOP and HOLD flags.(Always read as 0) */
+  SET_BIT(PWR->MPUCR, PWR_MPUCR_CSSF);
+
+  /* MPU STAY in STOP MODE */
+  CLEAR_BIT(PWR->MPUCR, PWR_MPUCR_PDDS);
+
+  /* MPU CSTANDBY mode disabled */
+  SET_BIT(PWR->MPUCR, PWR_MPUCR_CSTBYDIS);
+
+  /* RCC Stop Request Set Register */
+#if defined(RCC_MP_SREQSETR_STPREQ_P0) & defined(RCC_MP_SREQSETR_STPREQ_P1)
+  /* CA7_CORE0 and CA7_CORE1 available */
+  RCC->MP_SREQSETR = RCC_MP_SREQSETR_STPREQ_P0 | RCC_MP_SREQSETR_STPREQ_P1;
+#else
+  /* Only CA7_CORE0 available */
+  RCC->MP_SREQSETR = RCC_MP_SREQSETR_STPREQ_P0;
+#endif /* RCC_MP_SREQSETR_STPREQ_P0 & RCC_MP_SREQSETR_STPREQ_P1 */
+
+#else
+  /* Prevent unused argument compilation warning */
+  UNUSED(Regulator);
+#endif /*CORE_CA7*/
+
+  /* Select Stop mode entry --------------------------------------------------*/
+  if ((STOPEntry == PWR_STOPENTRY_WFI))
+  {
+    /* Request Wait For Interrupt */
+    __WFI();
+  }
+  else if (STOPEntry == PWR_STOPENTRY_WFE)
+  {
+    /* Request Wait For Event */
+    __SEV();
+    __WFE();
+    __WFE();
+  }
+
+#ifdef CORE_CM4
+  /* Reset SLEEPDEEP bit of Cortex System Control Register */
+  SCB->SCR &= (uint32_t)~((uint32_t)SCB_SCR_SLEEPDEEP_Msk);
+#endif/* CORE_CM4 */
+
+#ifdef CORE_CA7
+  /* RCC Clear Request Set Register */
+#if defined(RCC_MP_SREQCLRR_STPREQ_P0) & defined(RCC_MP_SREQCLRR_STPREQ_P1)
+  /* CA7_CORE0 and CA7_CORE1 available */
+  RCC->MP_SREQCLRR = RCC_MP_SREQCLRR_STPREQ_P0 | RCC_MP_SREQCLRR_STPREQ_P1;
+#else
+  /* Only CA7_CORE0 available */
+  RCC->MP_SREQCLRR = RCC_MP_SREQCLRR_STPREQ_P0;
+#endif /* RCC_MP_SREQCLRR_STPREQ_P0 | RCC_MP_SREQCLRR_STPREQ_P1 */
+#endif
+}
+
+
+/**
+  * @brief Enters MPU CStandby / MCU CSTOP allowing system Standby mode.
+  * @note In Standby mode, all I/O pins are high impedance except for:
+  *          - Reset pad (still available)
+  *          - RTC_AF1 pin (PC13) if configured for tamper, time-stamp, RTC
+  *            Alarm out, or RTC clock calibration out.
+  *          - RTC_AF2 pin (PI8) if configured for tamper or time-stamp.
+  *          - WKUP pins if enabled.
+  * @retval None
+  */
+void HAL_PWR_EnterSTANDBYMode(void)
+{
+
+#ifdef CORE_CM4
+  /*Allow to go to STANDBY mode */
+  SET_BIT(PWR->MCUCR, PWR_MCUCR_PDDS);
+
+  /*Allow CORE_CM4 to enter CSTOP mode
+  Set SLEEPDEEP bit of Cortex System Control Register */
+  SCB->SCR |= SCB_SCR_SLEEPDEEP_Msk;
+#endif /* CORE_CM4 */
+
+#ifdef CORE_CA7
+
+  /* Clear MPU STANDBY, STOP and HOLD flags.(Always read as 0) */
+  SET_BIT(PWR->MPUCR, PWR_MPUCR_CSSF);
+  /* system Power Down Deepsleep selection */
+  /* MPU go in STANDBY MODE */
+  SET_BIT(PWR->MPUCR, PWR_MPUCR_PDDS);
+
+  /* MPU CSTANDBY mode enabled */
+  CLEAR_BIT(PWR->MPUCR, PWR_MPUCR_CSTBYDIS);
+
+  /* RCC Stop Request Set Register */
+#if defined(RCC_MP_SREQSETR_STPREQ_P0) & defined(RCC_MP_SREQSETR_STPREQ_P1)
+  /* CA7_CORE0 and CA7_CORE1 available */
+  RCC->MP_SREQSETR = RCC_MP_SREQSETR_STPREQ_P0 | RCC_MP_SREQSETR_STPREQ_P1;
+#else
+  /* Only CA7_CORE0 available */
+  RCC->MP_SREQSETR = RCC_MP_SREQSETR_STPREQ_P0;
+#endif /* RCC_MP_SREQSETR_STPREQ_P0 & RCC_MP_SREQSETR_STPREQ_P1 */
+#endif
+
+  /* Clear Reset Status */
+  __HAL_RCC_CLEAR_RESET_FLAGS();
+
+
+  /* This option is used to ensure that store operations are completed */
+#if defined ( __CC_ARM)
+  __force_stores();
+#endif
+  /* Request Wait For Interrupt */
+  __WFI();
+}
+
+
+/**
+  * @brief Indicates Sleep-On-Exit when returning from Handler mode to Thread mode.
+  * @note Set SLEEPONEXIT bit of SCR register. When this bit is set, the processor
+  *       re-enters CSleep mode when an interruption handling is over.
+  *       Setting this bit is useful when the processor is expected to run only on
+  *       interruptions handling.
+  * @retval None
+  */
+void HAL_PWR_EnableSleepOnExit(void)
+{
+#ifdef CORE_CM4
+  /* Set SLEEPONEXIT bit of Cortex System Control Register */
+  SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk));
+#endif
+}
+
+
+/**
+  * @brief Disables Sleep-On-Exit feature when returning from Handler mode to Thread mode.
+  * @note Clears SLEEPONEXIT bit of SCR register. When this bit is set, the processor
+  *       re-enters CSLEEP mode when an interruption handling is over.
+  * @retval None
+  */
+void HAL_PWR_DisableSleepOnExit(void)
+{
+#ifdef CORE_CM4
+  /* Clear SLEEPONEXIT bit of Cortex System Control Register */
+  CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk));
+#endif
+}
+
+/**
+  * @brief Enables CORTEX SEVONPEND bit.
+  * @note Sets SEVONPEND bit of SCR register. When this bit is set, this causes
+  *       WFE to wake up when an interrupt moves from inactive to pended.
+  * @retval None
+  */
+void HAL_PWR_EnableSEVOnPend(void)
+{
+#ifdef CORE_CM4
+  /* Set SEVONPEND bit of Cortex System Control Register */
+  SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk));
+#endif
+}
+
+/**
+  * @brief Disables CORTEX SEVONPEND bit.
+  * @note Clears SEVONPEND bit of SCR register. When this bit is set, this causes
+  *       WFE to wake up when an interrupt moves from inactive to pended.
+  * @retval None
+  */
+void HAL_PWR_DisableSEVOnPend(void)
+{
+#ifdef CORE_CM4
+  /* Clear SEVONPEND bit of Cortex System Control Register */
+  CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk));
+#endif
+}
+
+/**
+  * @brief  PWR PVD interrupt callback
+  * @retval None
+  */
+__weak void HAL_PWR_PVDCallback(void)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_PWR_PVDCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* HAL_PWR_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */

meta-st/meta-st-stm32mp-addons/mx/stm32mp157d-vrpmdv-mon-mx/Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_pwr_ex.c

@@ -0,0 +1,792 @@
+/**
+  ******************************************************************************
+  * @file    stm32mp1xx_hal_pwr_ex.c
+  * @author  MCD Application Team
+  * @brief   Extended PWR HAL module driver.
+  *          This file provides firmware functions to manage the following
+  *          functionalities of PWR extension peripheral:
+  *           + Peripheral Extended features functions
+  *
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32mp1xx_hal.h"
+
+
+/** @addtogroup STM32MP1xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup PWREx PWREx
+  * @brief PWR HAL module driver
+  * @{
+  */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup PWREx_Private_Constants PWREx Private Constants
+  * @{
+  */
+
+/** @defgroup PWREx_AVD_Mode_Mask PWR Extended AVD Mode Mask
+  * @{
+  */
+#define AVD_MODE_IT              ((uint32_t)0x00010000U)
+#define AVD_MODE_EVT             ((uint32_t)0x00020000U)
+#define AVD_RISING_EDGE          ((uint32_t)0x00000001U)
+#define AVD_FALLING_EDGE         ((uint32_t)0x00000002U)
+#define AVD_RISING_FALLING_EDGE  ((uint32_t)0x00000003U)
+/**
+  * @}
+  */
+
+/** @defgroup PWREx_REG_SET_TIMEOUT PWR Extended Flag Setting Time Out Value
+  * @{
+  */
+#define PWR_FLAG_SETTING_DELAY_US  ((uint32_t)1000U)
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup PWREx_Private_Functions PWREx Private Functions
+  * @{
+  */
+
+/** @defgroup PWREx_Group1 Peripheral Extended features functions
+  *  @brief Peripheral Extended features functions
+  *
+@verbatim
+
+ ===============================================================================
+                 ##### Peripheral extended features functions #####
+ ===============================================================================
+
+    *** Main and Backup Regulators configuration ***
+    ================================================
+    [..]
+      (+) The backup domain includes 4 Kbytes of backup SRAM accessible only from
+          the CPU, and address in 32-bit, 16-bit or 8-bit mode. Its content is
+          retained even in Standby or VBAT mode when the low power backup regulator
+          is enabled. It can be considered as an internal EEPROM when VBAT is
+          always present. You can use the HAL_PWR_EnableBkUpReg() function to
+          enable the low power backup regulator.
+
+      (+) When the backup domain is supplied by VDD (analog switch connected to VDD)
+          the backup SRAM is powered from VDD which replaces the VBAT power supply to
+          save battery life.
+
+      (+) The backup SRAM is not mass erased by a tamper event. It is read
+          protected to prevent confidential data, such as cryptographic private
+          key, from being accessed.
+
+        Refer to the product datasheets for more details.
+
+
+    *** VBAT battery charging ***
+    =============================
+    [..]
+      (+) When VDD is present, the external battery connected to VBAT can be charged through an
+          internal resistance. VBAT charging can be performed either through a 5 KOhm resistor
+          or through a 1.5 KOhm resistor.
+      (+) VBAT charging is enabled by HAL_PWREx_EnableBatteryCharging(ResistorValue) function
+          with:
+       (++) ResistorValue:
+        (+++) PWR_BATTERY_CHARGING_RESISTOR_5: 5 KOhm resistor.
+        (+++) PWR_BATTERY_CHARGING_RESISTOR_1_5: 1.5 KOhm resistor.
+      (+) VBAT charging is disabled by HAL_PWREx_DisableBatteryCharging() function.
+
+     *** VBAT and Temperature supervision ***
+    ========================================
+    [..]
+      (+) The VBAT battery voltage supply can be monitored by comparing it with two threshold
+          levels: VBAThigh and VBATlow. VBATH flag and VBATL flag in the PWR control register 2
+          (PWR_CR2), indicate if VBAT is higher or lower than the threshold.
+      (+) The temperature can be monitored by comparing it with two threshold levels, TEMPhigh
+          and TEMPlow. TEMPH and TEMPL flags, in the PWR control register 2 (PWR_CR2),
+          indicate whether the device temperature is higher or lower than the threshold.
+      (+) The VBAT and the temperature monitoring is enabled by HAL_PWREx_EnableMonitoring()
+          function and disabled by HAL_PWREx_DisableMonitoring() function.
+      (+) The HAL_PWREx_GetVBATLevel() function return the VBAT level which can be:
+          PWR_VBAT_BELOW_LOW_THRESHOLD or PWR_VBAT_ABOVE_HIGH_THRESHOLD or
+          PWR_VBAT_BETWEEN_HIGH_LOW_THRESHOLD.
+      (+) The HAL_PWREx_GetTemperatureLevel() function return the Temperature level which
+          can be: PWR_TEMP_BELOW_LOW_THRESHOLD or PWR_TEMP_ABOVE_HIGH_THRESHOLD or
+          PWR_TEMP_BETWEEN_HIGH_LOW_THRESHOLD.
+
+    *** AVD configuration ***
+    =========================
+    [..]
+      (+) The AVD is used to monitor the VDDA power supply by comparing it to a
+          threshold selected by the AVD Level (ALS[3:0] bits in the PWR_CSR1 register).
+      (+) A AVDO flag is available to indicate if VDDA is higher or lower
+          than the AVD threshold. This event is internally connected to the EXTI
+          line 16 to generate an interrupt if enabled.
+          It is configurable through __HAL_PWR_PVD_AVD_EXTI_ENABLE_IT() macro.
+      (+) The AVD is stopped in System Standby mode.
+
+
+    *** USB Regulator supervision ***
+    ===================================
+    [..]
+      (+) When the USB regulator is enabled, the VDD33USB supply level detector shall
+          be enabled through  HAL_PWREx_EnableUSBVoltageDetector() function and disabled by
+          HAL_PWREx_DisableUSBVoltageDetector() function.
+
+@endverbatim
+  * @{
+  */
+
+
+
+/**
+  * @brief  Enables the Backup Regulator.
+  * @note   After reset PWR_CR2 register is write-protected and the DBP bit in the
+  *         PWR control register 1 (PWR_CR1) has to be set before it can be written.
+  *         Use HAL_PWR_EnableBkUpAccess() to do this.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_PWREx_EnableBkUpReg(void)
+{
+  uint32_t tickstart = 0;
+
+  /* Enable Backup regulator */
+  SET_BIT(PWR->CR2, PWR_CR2_BREN);
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  /* Wait till Backup regulator ready flag is set */
+  while (__HAL_PWR_GET_FLAG(PWR_FLAG_BRR) == RESET)
+  {
+    if ((HAL_GetTick() - tickstart) > PWR_FLAG_SETTING_DELAY_US)
+    {
+      return HAL_TIMEOUT;
+    }
+  }
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Disables the Backup Regulator.
+  * @note   After reset PWR_CR2 register is write-protected and the DBP bit in the
+  *         PWR control register 1 (PWR_CR1) has to be set before it can be written.
+  *         Use HAL_PWR_EnableBkUpAccess() to do this.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_PWREx_DisableBkUpReg(void)
+{
+  uint32_t tickstart = 0;
+
+  /* Disable Backup regulator */
+  CLEAR_BIT(PWR->CR2, PWR_CR2_BREN);
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  /* Wait till Backup regulator ready flag is reset */
+  while (__HAL_PWR_GET_FLAG(PWR_FLAG_BRR) != RESET)
+  {
+    if ((HAL_GetTick() - tickstart) > PWR_FLAG_SETTING_DELAY_US)
+    {
+      return HAL_TIMEOUT;
+    }
+  }
+  return HAL_OK;
+}
+
+/**
+  * @brief  Enables the Retention Regulator.
+  * @note   After reset PWR_CR2 register is write-protected and the DBP bit in the
+  *         PWR control register 1 (PWR_CR1) has to be set before it can be written.
+  *         Use HAL_PWR_EnableBkUpAccess() to do this.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_PWREx_EnableRetReg(void)
+{
+  uint32_t tickstart = 0;
+
+  /* Enable Backup regulator */
+  SET_BIT(PWR->CR2, PWR_CR2_RREN);
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  /* Wait till Retention regulator ready flag is set */
+  while (__HAL_PWR_GET_FLAG(PWR_FLAG_RRR) == RESET)
+  {
+    if ((HAL_GetTick() - tickstart) > PWR_FLAG_SETTING_DELAY_US)
+    {
+      return HAL_TIMEOUT;
+    }
+  }
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Disables the Retention Regulator.
+  * @note   After reset PWR_CR2 register is write-protected and the DBP bit in the
+  *         PWR control register 1 (PWR_CR1) has to be set before it can be written.
+  *         Use HAL_PWR_EnableBkUpAccess() to do this.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_PWREx_DisableRetReg(void)
+{
+  uint32_t tickstart = 0;
+
+  /* Disable Backup regulator */
+  CLEAR_BIT(PWR->CR2, PWR_CR2_RREN);
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  /* Wait till Backup regulator ready flag is set */
+  while (__HAL_PWR_GET_FLAG(PWR_FLAG_RRR) != RESET)
+  {
+    if ((HAL_GetTick() - tickstart) > PWR_FLAG_SETTING_DELAY_US)
+    {
+      return HAL_TIMEOUT;
+    }
+  }
+  return HAL_OK;
+}
+
+/**
+  * @brief  Enables the 1V1 Regulator.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_PWREx_Enable1V1Reg(void)
+{
+  uint32_t tickstart = 0;
+
+  /* Enable 1V1 regulator */
+  SET_BIT(PWR->CR3, PWR_CR3_REG11EN);
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  /* Wait till 1V1 regulator ready flag is set */
+  while (__HAL_PWR_GET_FLAG(PWR_FLAG_11R) == RESET)
+  {
+    if ((HAL_GetTick() - tickstart) > PWR_FLAG_SETTING_DELAY_US)
+    {
+      return HAL_TIMEOUT;
+    }
+  }
+
+  return HAL_OK;
+}
+
+
+/**
+  * @brief Disables the 1V1 Regulator.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_PWREx_Disable1V1Reg(void)
+{
+  uint32_t tickstart = 0;
+
+  /* Disable 1V1 regulator */
+  CLEAR_BIT(PWR->CR3, PWR_CR3_REG11EN);
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  /* Wait till 1V1 regulator ready flag is reset */
+  while (__HAL_PWR_GET_FLAG(PWR_FLAG_11R) != RESET)
+  {
+    if ((HAL_GetTick() - tickstart) > PWR_FLAG_SETTING_DELAY_US)
+    {
+      return HAL_TIMEOUT;
+    }
+  }
+
+  return HAL_OK;
+}
+
+/**
+  * @brief Enables the 1V8 Regulator.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_PWREx_Enable1V8Reg(void)
+{
+  uint32_t tickstart = 0;
+
+  /* Enable 1V8 regulator */
+  SET_BIT(PWR->CR3, PWR_CR3_REG18EN);
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  /* Wait till 1V8 regulator ready flag is set */
+  while (__HAL_PWR_GET_FLAG(PWR_FLAG_18R) == RESET)
+  {
+    if ((HAL_GetTick() - tickstart) > PWR_FLAG_SETTING_DELAY_US)
+    {
+      return HAL_TIMEOUT;
+    }
+  }
+  return HAL_OK;
+}
+
+
+/**
+  * @brief Disables the 1V8 Regulator.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_PWREx_Disable1V8Reg(void)
+{
+  uint32_t tickstart = 0;
+
+  /* Disable 1V8 regulator */
+  CLEAR_BIT(PWR->CR3, PWR_CR3_REG18EN);
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  /* Wait till 1V8 regulator ready flag is reset */
+  while (__HAL_PWR_GET_FLAG(PWR_FLAG_18R) != RESET)
+  {
+    if ((HAL_GetTick() - tickstart) > PWR_FLAG_SETTING_DELAY_US)
+    {
+      return HAL_TIMEOUT;
+    }
+  }
+  return HAL_OK;
+}
+
+
+/**
+  * @brief  Enable the USB voltage level detector.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_PWREx_EnableUSBVoltageDetector(void)
+{
+  uint32_t tickstart = 0;
+
+  /* Enable the USB voltage detector */
+  SET_BIT(PWR->CR3, PWR_CR3_USB33DEN);
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  /* Wait until USB33 regulator ready flag is set */
+  while (__HAL_PWR_GET_FLAG(PWR_FLAG_USB) == RESET)
+  {
+    if ((HAL_GetTick() - tickstart) > PWR_FLAG_SETTING_DELAY_US)
+    {
+      return HAL_TIMEOUT;
+    }
+  }
+  return HAL_OK;
+}
+
+/**
+  * @brief  Disable the USB voltage level detector.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_PWREx_DisableUSBVoltageDetector(void)
+{
+  uint32_t tickstart = 0;
+
+  /* Disable the USB voltage detector */
+  CLEAR_BIT(PWR->CR3, PWR_CR3_USB33DEN);
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  /* Wait until USB33 regulator ready flag is reset */
+  while (__HAL_PWR_GET_FLAG(PWR_FLAG_USB) != RESET)
+  {
+    if ((HAL_GetTick() - tickstart) > PWR_FLAG_SETTING_DELAY_US)
+    {
+      return HAL_TIMEOUT;
+    }
+  }
+  return HAL_OK;
+}
+
+
+/**
+  * @brief  Enable the Battery charging.
+  *         When VDD is present, charge the external battery through an internal resistor.
+  * @param  ResistorValue: Specifies the charging resistor.
+  *          This parameter can be one of the following values:
+  *            @arg PWR_BATTERY_CHARGING_RESISTOR_5:   5 KOhm resistor.
+  *            @arg PWR_BATTERY_CHARGING_RESISTOR_1_5: 1.5 KOhm resistor.
+  * @retval None
+  */
+void HAL_PWREx_EnableBatteryCharging(uint32_t ResistorValue)
+{
+  assert_param(IS_PWR_BATTERY_RESISTOR_SELECT(ResistorValue));
+
+  /* Specify the charging resistor */
+  MODIFY_REG(PWR->CR3, PWR_CR3_VBRS, ResistorValue);
+
+  /* Enable the Battery charging */
+  SET_BIT(PWR->CR3, PWR_CR3_VBE);
+}
+
+
+/**
+  * @brief  Disable the Battery charging.
+  * @retval None
+  */
+void HAL_PWREx_DisableBatteryCharging(void)
+{
+  /* Disable the Battery charging */
+  CLEAR_BIT(PWR->CR3, PWR_CR3_VBE);
+}
+
+
+/**
+  * @brief  Enable the VBAT and temperature monitoring.
+  * @note   After reset PWR_CR2 register is write-protected and the DBP bit in the
+  *         PWR control register 1 (PWR_CR1) has to be set before it can be written.
+  *         Use HAL_PWR_EnableBkUpAccess() to do this.
+  * @retval HAL status
+  */
+void HAL_PWREx_EnableMonitoring(void)
+{
+  /* Enable the VBAT and Temperature monitoring */
+  SET_BIT(PWR->CR2, PWR_CR2_MONEN);
+}
+
+/**
+  * @brief  Disable the VBAT and temperature monitoring.
+  * @note   After reset PWR_CR2 register is write-protected and the DBP bit in the
+  *         PWR control register 1 (PWR_CR1) has to be set before it can be written.
+  *         Use HAL_PWR_EnableBkUpAccess() to do this.
+  * @retval HAL status
+  */
+void HAL_PWREx_DisableMonitoring(void)
+{
+  /* Disable the VBAT and Temperature monitoring */
+  CLEAR_BIT(PWR->CR2, PWR_CR2_MONEN);
+}
+
+/**
+  * @brief  Indicate whether the junction temperature is between, above or below the threshold.
+  * @retval Temperature level.
+  */
+uint32_t HAL_PWREx_GetTemperatureLevel(void)
+{
+  uint32_t tempLevel;
+  uint32_t regValue;
+
+  /* Read the temperature flags */
+  regValue = PWR->CR2 & (PWR_CR2_TEMPH | PWR_CR2_TEMPL);
+
+  /* Compare the read value to the temperature threshold */
+  if (regValue == PWR_CR2_TEMPL)
+  {
+    tempLevel = PWR_TEMP_BELOW_LOW_THRESHOLD;
+  }
+  else if (regValue == PWR_CR2_TEMPH)
+  {
+    tempLevel = PWR_TEMP_ABOVE_HIGH_THRESHOLD;
+  }
+  else
+  {
+    tempLevel = PWR_TEMP_BETWEEN_HIGH_LOW_THRESHOLD;
+  }
+
+  return tempLevel;
+}
+
+
+/**
+  * @brief  Indicate whether the Battery voltage level is between, above or below the threshold.
+  * @retval VBAT level.
+  */
+uint32_t HAL_PWREx_GetVBATLevel(void)
+{
+  uint32_t VBATLevel;
+  uint32_t regValue;
+
+  /* Read the VBAT flags */
+  regValue = PWR->CR2 & (PWR_CR2_VBATH | PWR_CR2_VBATL);
+
+  /* Compare the read value to the VBAT threshold */
+  if (regValue == PWR_CR2_VBATL)
+  {
+    VBATLevel = PWR_VBAT_BELOW_LOW_THRESHOLD;
+  }
+  else if (regValue == PWR_CR2_VBATH)
+  {
+    VBATLevel = PWR_VBAT_ABOVE_HIGH_THRESHOLD;
+  }
+  else
+  {
+    VBATLevel = PWR_VBAT_BETWEEN_HIGH_LOW_THRESHOLD;
+  }
+
+  return VBATLevel;
+}
+
+
+/**
+  * @brief  Configure the analog voltage threshold detected by the Analog Voltage Detector(AVD).
+  * @param  sConfigAVD: pointer to an PWR_AVDTypeDef structure that contains the configuration
+  *                     information for the AVD.
+  * @note   Refer to the electrical characteristics of your device datasheet for more details
+  *         about the voltage threshold corresponding to each detection level.
+  * @retval None
+  */
+void HAL_PWREx_ConfigAVD(PWREx_AVDTypeDef *sConfigAVD)
+{
+  /* Check the parameters */
+  assert_param(IS_PWR_AVD_LEVEL(sConfigAVD->AVDLevel));
+  assert_param(IS_PWR_AVD_MODE(sConfigAVD->Mode));
+
+  /* Set the ALS[18:17] bits according to AVDLevel value */
+  MODIFY_REG(PWR->CR1, PWR_CR1_ALS, sConfigAVD->AVDLevel);
+
+  /* Clear any previous config. Keep it clear if no IT mode is selected */
+  __HAL_PWR_PVD_AVD_EXTI_DISABLE_IT();
+  __HAL_PWR_PVD_AVD_EXTI_DISABLE_RISING_EDGE();
+  __HAL_PWR_PVD_AVD_EXTI_DISABLE_FALLING_EDGE();
+
+  /* Configure the interrupt mode */
+  if (AVD_MODE_IT == (sConfigAVD->Mode & AVD_MODE_IT))
+  {
+    __HAL_PWR_PVD_AVD_EXTI_ENABLE_IT();
+  }
+
+  /* Configure the edge */
+  if (AVD_RISING_EDGE == (sConfigAVD->Mode & AVD_RISING_EDGE))
+  {
+    __HAL_PWR_PVD_AVD_EXTI_ENABLE_RISING_EDGE();
+  }
+
+  if (AVD_FALLING_EDGE == (sConfigAVD->Mode & AVD_FALLING_EDGE))
+  {
+    __HAL_PWR_PVD_AVD_EXTI_ENABLE_FALLING_EDGE();
+  }
+}
+
+
+/**
+  * @brief  Enable the Analog Voltage Detector(AVD).
+  * @retval None
+  */
+void HAL_PWREx_EnableAVD(void)
+{
+  /* Enable the Analog Voltage Detector */
+  SET_BIT(PWR->CR1, PWR_CR1_AVDEN);
+}
+
+/**
+  * @brief  Disable the Analog Voltage Detector(AVD).
+  * @retval None
+  */
+void HAL_PWREx_DisableAVD(void)
+{
+  /* Disable the Analog Voltage Detector */
+  CLEAR_BIT(PWR->CR1, PWR_CR1_AVDEN);
+}
+
+
+/**
+  * @brief  This function handles the PWR PVD/AVD interrupt request.
+  * @note   This API should be called under the PVD_AVD_IRQHandler().
+  * @retval None
+  */
+void HAL_PWREx_PVD_AVD_IRQHandler(void)
+{
+  /* PVD EXTI line interrupt detected */
+  if (READ_BIT(PWR->CR1, PWR_CR1_PVDEN) != RESET)
+  {
+    /* PWR PVD interrupt user callback */
+    HAL_PWR_PVDCallback();
+  }
+
+  /* AVD EXTI line interrupt detected */
+  if (READ_BIT(PWR->CR1, PWR_CR1_AVDEN) != RESET)
+  {
+    /* PWR AVD interrupt user callback */
+    HAL_PWREx_AVDCallback();
+  }
+
+  /* Clear PWR PVD AVD EXTI pending bit */
+  __HAL_PWR_PVD_AVD_EXTI_CLEAR_FLAG();
+}
+
+/**
+  * @brief  PWR AVD interrupt callback
+  * @retval None
+  */
+__weak void HAL_PWREx_AVDCallback(void)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_PWREx_AVDCallback could be implemented in the user file
+   */
+}
+
+
+void HAL_PWREx_WAKEUP_PIN_IRQHandler(void)
+{
+
+  /* Wakeup pin EXTI line interrupt detected */
+  if (READ_BIT(PWR->WKUPFR, PWR_WKUPFR_WKUPF1) != RESET)
+  {
+    /* Clear PWR WKUPF1 flag */
+    SET_BIT(PWR->WKUPCR, PWR_WKUPCR_WKUPC1);
+
+    /* PWR WKUP1 interrupt user callback */
+    HAL_PWREx_WKUP1_Callback();
+  }
+
+  if (READ_BIT(PWR->WKUPFR, PWR_WKUPFR_WKUPF2)  != RESET)
+  {
+    /* Clear PWR WKUPF2 flag */
+    SET_BIT(PWR->WKUPCR, PWR_WKUPCR_WKUPC2);
+
+    /* PWR WKUP2 interrupt user callback */
+    HAL_PWREx_WKUP2_Callback();
+  }
+
+  if (READ_BIT(PWR->WKUPFR, PWR_WKUPFR_WKUPF3)  != RESET)
+  {
+    /* Clear PWR WKUPF3 flag */
+    SET_BIT(PWR->WKUPCR, PWR_WKUPCR_WKUPC3);
+
+    /* PWR WKUP3 interrupt user callback */
+    HAL_PWREx_WKUP3_Callback();
+  }
+
+  if (READ_BIT(PWR->WKUPFR, PWR_WKUPFR_WKUPF4)  != RESET)
+  {
+    /* Clear PWR WKUPF4 flag */
+    SET_BIT(PWR->WKUPCR, PWR_WKUPCR_WKUPC4);
+
+    /* PWR WKUP4 interrupt user callback */
+    HAL_PWREx_WKUP4_Callback();
+  }
+
+  if (READ_BIT(PWR->WKUPFR, PWR_WKUPFR_WKUPF5)  != RESET)
+  {
+    /* Clear PWR WKUPF5 flag */
+    SET_BIT(PWR->WKUPCR, PWR_WKUPCR_WKUPC5);
+
+    /* PWR WKUP5 interrupt user callback */
+    HAL_PWREx_WKUP5_Callback();
+  }
+
+  if (READ_BIT(PWR->WKUPFR, PWR_WKUPFR_WKUPF6)  != RESET)
+  {
+    /* Clear PWR WKUPF6 flag */
+    SET_BIT(PWR->WKUPCR, PWR_WKUPCR_WKUPC6);
+
+    /* PWR WKUP6 interrupt user callback */
+    HAL_PWREx_WKUP6_Callback();
+  }
+
+}
+
+/**
+  * @brief  PWR WKUP1 interrupt callback
+  * @retval None
+  */
+__weak void HAL_PWREx_WKUP1_Callback(void)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_PWREx_WKUP1Callback could be implemented in the user file
+  */
+}
+
+/**
+  * @brief  PWR WKUP2 interrupt callback
+  * @retval None
+  */
+__weak void HAL_PWREx_WKUP2_Callback(void)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_PWREx_WKUP2Callback could be implemented in the user file
+  */
+}
+
+/**
+  * @brief  PWR WKUP3 interrupt callback
+  * @retval None
+  */
+__weak void HAL_PWREx_WKUP3_Callback(void)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_PWREx_WKUP3Callback could be implemented in the user file
+  */
+}
+
+/**
+  * @brief  PWR WKUP4 interrupt callback
+  * @retval None
+  */
+__weak void HAL_PWREx_WKUP4_Callback(void)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_PWREx_WKUP4Callback could be implemented in the user file
+  */
+}
+
+/**
+  * @brief  PWR WKUP5 interrupt callback
+  * @retval None
+  */
+__weak void HAL_PWREx_WKUP5_Callback(void)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_PWREx_WKUP5Callback could be implemented in the user file
+  */
+}
+
+/**
+  * @brief  PWR WKUP6 interrupt callback
+  * @retval None
+  */
+__weak void HAL_PWREx_WKUP6_Callback(void)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_PWREx_WKUP6Callback could be implemented in the user file
+  */
+}
+
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* HAL_PWR_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */